Skip to content
TheChatArchiveThe Chat Archive
MiniMaxminimax/minimax-m3· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Marimo's print routing breaks Numba compilation In notebooks that do…

  1. User

    ISSUE DESCRIPTION

    Marimo's print routing breaks Numba compilation

    In notebooks that do not use mo.Thread, print must retain builtin identity so Numba can compile functions that call it. mo.Thread must continue routing output to the spawning cell, with output isolation between concurrent threads.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /marimo, current file: none) bash-$

  2. MiniMax Assistant

    Let me start by exploring the repository structure to understand what we're working with.

  3. MiniMax Assistant

    Now let me look at the threads module:

  4. MiniMax Assistant

    Let me look at where print is being installed/imported as the print_override:

  5. MiniMax Assistant

    Let me see where the print override is used in kernel_runner:

  6. MiniMax Assistant

    Now let me look at the script context to understand how the print override is used there:

  7. MiniMax Assistant

    Let me search for related tests:

  8. MiniMax Assistant

    Now let me see how print is set up in the kernel. Let me also look for input_override to compare:

  9. MiniMax Assistant

    Now let me look at the script_context.py file to understand how it uses print_override:

  10. MiniMax Assistant

    Let me look at the script_runner.py and kernel_runner.py to see how print_override is passed:

  11. MiniMax Assistant

    Let me see if there is a way to detect if Numba is being used:

  12. MiniMax Assistant

    Let me first try to reproduce the issue:

  13. MiniMax Assistant

    Let me try to reproduce the issue in a marimo kernel:

  14. MiniMax Assistant

    Now I have reproduced the issue. Let me understand the solution better. The fix should be:

    1. By default, print should be the builtin print (so Numba can compile functions)
    2. When mo.Thread is being used, print should be print_override to route output to the spawning cell

    Let me look at the threads module more carefully to understand where to add this:

  15. MiniMax Assistant

    Let me verify where the print_override is actually installed:

  16. MiniMax Assistant

    Now I have a clear understanding of the issue. Let me reproduce it once more to be sure:

  17. MiniMax Assistant

    Let me try a simple approach first - just removing the print_override from runtime.py:

  18. MiniMax Assistant

    Let me look at the threads.py to understand the flow:

  19. MiniMax Assistant

    Now let me look at the print_override.py and understand the current implementation:

  20. MiniMax Assistant

    Now I have a clear understanding. Let me implement the fix. The plan is:

    1. Don't install the print_override in the main module by default in patches.py
    2. In threads.py, install the print_override only when a mo.Thread is running (using ref-counting)
    3. Update the relevant files
  21. MiniMax Assistant

    Now let me make the changes. First, let me update patches.py to not install the print_override in the main module (keep the parameter for API compatibility but make it a no-op):

  22. MiniMax Assistant

    Now let me update threads.py to install the print_override when a mo.Thread is running:

  23. MiniMax Assistant

    Now let me update threads.py to install the print_override when a mo.Thread is running:

  24. MiniMax Assistant

    Let me run the existing tests to make sure I haven't broken anything:

  25. MiniMax Assistant

    I have a circular import. Let me fix it by using a lazy import in print_override.py:

  26. MiniMax Assistant

    Now let me run the reproduction test to confirm the fix works:

  27. MiniMax Assistant

    The Numba test now passes. Let me write a more comprehensive test to make sure the mo.Thread still works correctly:

  28. MiniMax Assistant

    I see a bug. Let me fix it:

  29. MiniMax Assistant

    Now let me test the case where the user has a custom print function:

  30. MiniMax Assistant

    Let me run the existing tests:

  31. MiniMax Assistant

    All existing tests pass. Let me also run the patches tests:

  32. MiniMax Assistant

    Let me look at the threads test to understand how it tests the print functionality:

  33. MiniMax Assistant

    Now let me write a more comprehensive test that uses the actual mo.Thread and verifies the print routing works:

  34. MiniMax Assistant

    The test setup is getting complex. Let me just verify the existing tests pass and write a simpler test:

  35. MiniMax Assistant

    Let me run all the tests in test_threads.py:

  36. MiniMax Assistant

    Let me also run a broader test to make sure I haven't broken anything:

  37. MiniMax Assistant

    Let me check if the failed test is related to my changes:

  38. MiniMax Assistant

    Let me verify this test was already failing before my changes:

  39. MiniMax Assistant

    Good, this test was already failing before my changes. Let me restore my changes:

  40. MiniMax Assistant

    Let me also run the messaging tests:

  41. MiniMax Assistant

    Let me check the current state of the changes:

  42. MiniMax Assistant

    Let me write a test that specifically tests the Numba scenario with the marimo kernel:

  43. MiniMax Assistant

    Let me write a test using the existing test infrastructure:

  44. MiniMax Assistant

    Let me write the test in the right location:

  45. MiniMax Assistant

    The test passes! Now let me delete my test file since I'm not supposed to add new tests:

  46. MiniMax Assistant

    Let me run all the relevant tests one more time to make sure everything works:

  47. MiniMax Assistant

    Let me run my reproduction test to confirm the fix works:

  48. MiniMax Assistant

    Let me also test a more complex scenario - what happens when we have multiple threads:

  49. MiniMax Assistant

    The ref-counted approach works correctly. Now let me also test that the Numba compilation works in a scenario with mo.Thread:

  50. MiniMax Assistant

    Let me fix the test to check correctly:

  51. MiniMax Assistant

    Let me test a scenario where a user-defined print is preserved across thread lifecycle:

  52. MiniMax Assistant

    Let me check if there are any other places where the print_override is used:

  53. MiniMax Assistant

    Let me clean up the unused print_override parameter in patches.py and kernel_lifecycle.py. First let me check if it's truly safe to remove:

  54. MiniMax Assistant

    I see there's a test helper that also uses print_override_fn=print_override. Let me check that.

  55. MiniMax Assistant

    Let me run the specific test to make sure the print routing still works:

  56. MiniMax Assistant

    Let me also verify my changes don't have any issues by running a wider set of tests:

  57. MiniMax Assistant

    All 30 tests pass. Let me also run my reproduction test one more time:

  58. MiniMax Assistant

    Let me clean up the temporary test files:

  59. MiniMax Assistant

    Let me check the final state of my changes:

  60. MiniMax Assistant

    Let me run a broader test to make sure nothing is broken:

  61. MiniMax Assistant

    Excellent! All 1444 tests pass (the one failure is pre-existing and unrelated to my changes - it's a permissions issue in the test environment). Let me create a final reproduction test to verify the fix:

  62. MiniMax Assistant

    Let me clean up the temporary test file:

  63. MiniMax Assistant

    Let me do a final check on the changes:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.