Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-sonnet-5· anthropicHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Marimo's print routing breaks Numba compilation In notebooks that do…

  1. User

    ISSUE DESCRIPTION

    Marimo's print routing breaks Numba compilation

    In notebooks that do not use mo.Thread, print must retain builtin identity so Numba can compile functions that call it. mo.Thread must continue routing output to the spawning cell, with output isolation between concurrent threads.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /marimo, current file: none) bash-$

  2. Claude Assistant

    Great, numba got installed. Now let's write a repro script that mimics marimo module patching and check whether Numba can compile a function referencing print, before and after the print override patch.

  3. Claude Assistant

    There's a proper venv. Let's install numba into that venv and run repro there.

  4. Claude Assistant

    Reproduced the issue: with print_override installed, Numba fails to compile. Let's confirm that without the override it works fine.

  5. Claude Assistant

    Now let's update threads.py to add the dynamic install/uninstall logic.

  6. Claude Assistant

    Now let's update the run method to use these helpers.

  7. Claude Assistant

    All passing. Now let's re-run our numba repro with actual kernel-based flow to validate the fix end-to-end (via Kernel, similar to test_thread_print but also checking print identity for non-thread cells).

  8. Claude Assistant

    Now let's write a more thorough reproduction/verification test using the actual Kernel class (mirroring the test harness) to check: (1) print identity preserved without Threads, (2) Numba compiles fine without Threads, (3) mo.Thread output routing still works with isolation between concurrent threads.

  9. Claude Assistant

    All 4 tests pass. Let's remove the temp test file and now run the full relevant test suites to make sure nothing else broke.

  10. Claude Assistant

    Pre-existing failure unrelated to our change (environment permission issue with os.setsid()), confirmed by testing on the original codebase without our changes. Now let's run broader test suites (messaging, print_override, patches) to be thorough.

  11. Claude Assistant

    All pass. Let's also run the broader test suite for pyodide session and script/kernel_runner to make sure nothing broke there (since they pass print_override=None already, unaffected), and check patches.py tests specifically.

  12. Claude Assistant

    Now let's also test concurrent thread output isolation more rigorously, since the issue emphasizes "output isolation between concurrent threads."

  13. Claude Assistant

    Concurrent thread output isolation confirmed. Let's remove this temp test file.

  14. Claude Assistant

    Now let's check git diff for a final review, and also double check other places using patch_main_module_context/scripts for consistency.

  15. Claude Assistant

    Let's also run mypy on these files if available.

  16. Claude Assistant

    Good, no other dependents. Now let's run the full test suite one more time for messaging + runtime + a broader sanity check (excluding the known pre-existing failing test), and also check _pyodide tests briefly.

  17. Claude Assistant

    Pre-existing failure unrelated to our change (missing static build artifact). Let's confirm.

  18. Claude Assistant

    Confirmed pre-existing, unrelated to our change. Now let's clean up temp files and remove numba if it was only installed for testing purposes (not necessary to uninstall, but let's leave it since it's a venv and doesn't affect repo files). Let's check no repo files changed unexpectedly.

  19. Claude Assistant

    Clean. Let's do one final full re-run of the numba repro script from the beginning to make sure everything works end to end with the actual patch flow (not just my temp pytest tests), and clean up temp files.

  20. Claude Assistant

    Both scenarios now work correctly — with print_override passed but no active thread, print remains true identity, and Numba compiles successfully. Let's do one more sanity check with the full test suite for _messaging and _runtime combined to ensure nothing regressed, then finalize.

  21. Claude Assistant

    Only the known pre-existing environment-related failure remains. Now let's uninstall numba from the venv since it was only for testing (not required, but to keep environment clean — actually not necessary since it's not part of repo). I'll leave it as-is since it doesn't affect repo files.

  22. Claude Assistant

    Checklist review

    • If an error was reported in the issue description, I have successfully reproduced it. Yes. I reproduced the core problem with a script that patched __main__ via patches.patch_main_module(..., print_override=print_override) (mirroring what runtime.py does for every kernel) and tried to numba.njit a function calling print. This failed with numba.core.errors.TypingError: Untyped global name 'print': Cannot determine Numba type of <class 'function'> because the module's global print was a Python closure (print_override), not the true builtin print, so Numba couldn't recognize it.

    • If an error was reported in the issue description, I have confirmed that my fix resolves the error. Yes. After the fix, the same script compiles and runs correctly (3 / 4 printed as expected), matching the baseline behavior with no override at all. I also added and ran temporary pytest-based tests (removed afterward) using the real Kernel fixtures confirming: (1) print is builtins.print holds for notebooks that never use mo.Thread; (2) a Numba-jitted function calling print compiles fine inside a real kernel-run cell; (3) mo.Thread output is still correctly routed to the spawning cell's stream; (4) after a thread completes, print reverts to builtin identity again.

    • I have thought about edge cases and made sure my fix handles them as well. Yes:

      • Reference-counting keyed by id(globals_dict) so multiple concurrent mo.Threads (even nested ones) sharing the same kernel correctly install/uninstall the override without one thread's completion prematurely restoring identity while another thread still needs routed output.
      • Each kernel's globals dict is patched independently (not a process-wide builtins.print patch), so concurrent sessions in run mode don't leak the override across sessions.
      • Output isolation between concurrent threads was explicitly verified with a test spawning two mo.Threads printing interleaved output — each thread's output stream only contained its own messages.
      • Wrapped super().run() in try/finally so the override (and THREADS/context teardown) is properly reverted even if the thread target raises an exception.
      • ScriptRuntimeContext threads are left untouched (as before), since standard streams aren't redirected in script mode and print_override was never installed there.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. Yes. Ran tests/_runtime (1444 passed) and tests/_messaging (266 passed) fully, plus tests/_pyodide, tests/_runtime/test_threads.py, and tests/_messaging/test_print_override.py specifically. The only failures present (test_non_windows_does_not_change_event_loop_policy and test_pyodide_bridge_export_html) were confirmed via git stash to pre-exist on the unmodified repository (due to sandbox environment limitations: os.setsid() permission error and a missing static build artifact), unrelated to this change.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.