Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.6-27B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Marimo's print routing breaks Numba compilation In notebooks that do…

  1. User

    ISSUE DESCRIPTION

    Marimo's print routing breaks Numba compilation

    In notebooks that do not use mo.Thread, print must retain builtin identity so Numba can compile functions that call it. mo.Thread must continue routing output to the spawning cell, with output isolation between concurrent threads.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /marimo, current file: none) bash-$

  2. Qwen Assistant

    Let me start by understanding the repository structure and the issue at hand. The issue is about Marimo's print routing breaking Numba compilation. The key points are:

    1. In notebooks that don't use mo.Thread, print must retain builtin identity so Numba can compile functions that call it.
    2. mo.Thread must continue routing output to the spawning cell, with output isolation between concurrent threads.

    Let me first explore the repository structure to understand how it's organized.

  3. Qwen Assistant

    Let me explore the marimo source directory and look for print routing and Thread-related code.

  4. Qwen Assistant

    Let me search for print routing related code.

  5. Qwen Assistant

    Let me look at the patches.py file, capture.py, and threads.py since they seem most relevant:

  6. Qwen Assistant

    Now let me look at the capture.py file:

  7. Qwen Assistant

    Now let me look at the threads.py file:

  8. Qwen Assistant

    Now let me look at the ThreadLocalStreamProxy and related stream files:

  9. Qwen Assistant

    Now let me search for where print is being overridden and how it relates to Numba:

  10. Qwen Assistant

    Now I understand the issue. The print_override function in print_override.py is used as the print override in the main module. The problem is that Numba checks if print is the builtin print for compilation purposes. When marimo replaces print with print_override, even though it's decorated with @functools.wraps(print), Numba can't recognize it as the builtin print.

    The issue states:

    1. In notebooks that do NOT use mo.Thread, print must retain builtin identity so Numba can compile
    2. mo.Thread must continue routing output to the spawning cell

    The key insight is that the print_override function is always set as the print in the module, but it only does special routing when the current thread is in THREADS. For non-thread cases, it just calls _original_print.

    The solution should be to NOT override print in the module's globals at all when not needed for thread routing. Let me look at where the print override is installed:

  11. Qwen Assistant

    Now let me look at how the print_override_fn is passed:

  12. Qwen Assistant

    Let me see more context around where print_override is used in runtime.py:

  13. Qwen Assistant

    Now let me look at how tests might be structured for this. Let me search for any existing tests related to print override or Numba:

  14. Qwen Assistant

    Now let me understand the issue better. The problem is that print is being overridden in the module's __dict__ with print_override, which breaks Numba's ability to recognize the builtin print. Numba checks for builtin identity.

    The key is: when mo.Thread is NOT being used (i.e., no threads in THREADS), print should be the actual builtin print. But when mo.Thread IS being used, we need the routing functionality.

    Looking at the code flow:

    1. print_override is always passed to patch_main_module in kernel mode
    2. In create_main_module, print_override is set via _module.__dict__.setdefault("print", print_override)
    3. This means print in the module is always print_override, not the builtin print

    The solution should be to NOT override print at the module level. Instead, we should use the sys.stdout redirection approach that's already being used (via ThreadLocalStreamProxy or stream handling). This way, print remains the builtin, but output is still routed correctly.

    Let me check how stdout is set up in the kernel context:

  15. Qwen Assistant

    Let me also check what happens with stdout in the streams:

  16. Qwen Assistant

    Let me look at the stream implementations to understand how stdout/stderr are handled:

  17. Qwen Assistant

    Now I understand the architecture better. The key insight is:

    1. sys.stdout and sys.stderr are already being set to custom stream classes (ThreadSafeStdout/ThreadSafeStderr) that route output properly
    2. Additionally, print is being overridden in the module's __dict__ with print_override
    3. The print_override function is mainly needed for mo.Thread cases where stdout/stderr are set to None

    Let me verify this by looking at how mo.Thread sets up its context:

  18. Qwen Assistant

    So in mo.Thread, the context's stdout and stderr are set to None. This means that for threads, the print override is the mechanism that routes output. But for non-thread cases, sys.stdout is already a ThreadSafeStdout which routes output correctly.

    The problem is that print_override is always set in the module's globals, even when threads aren't used. This breaks Numba's check for builtin print.

    The solution should be: don't set print_override in the module's __dict__ for the main kernel module. The sys.stdout / sys.stderr redirection is already sufficient for non-thread output routing. For mo.Thread, the print_override function is still needed since threads set stdout/stderr to None - but this only needs to work inside the thread, not at the module level.

    Wait, let me reconsider. When a mo.Thread runs, it has its own context with stdout/stderr = None. The thread's run() method calls initialize_context(self._marimo_ctx). The print_override function checks if the current thread ID is in THREADS, and if so, it routes the output via the context's stream.

    So the issue is:

    1. print is overridden at the module level with print_override
    2. Numba checks if print is builtin.print - this fails because print is print_override
    3. But print_override forwards to _original_print when not in a thread

    The solution is to NOT override print at the module level at all. Since sys.stdout is already ThreadSafeStdout for non-thread cases, output goes through the right channels. For thread cases, we need another approach.

    Looking more carefully at the thread case: when a thread runs, sys.stdout is still the process-level sys.stdout (a ThreadSafeStdout or a ThreadLocalStreamProxy), but the thread's context has stdout = None. So we need a way for threads to use their own print routing.

    Let me check how threads handle sys.stdout:

  19. Qwen Assistant

    Let me look at the redirect_streams.py:

  20. Qwen Assistant

    Now I have a much clearer picture. Let me understand the flow:

    1. In edit mode: sys.stdout/sys.stderr are replaced with ThreadSafeStdout/ThreadSafeStderr during cell execution. This means print() (the builtin) writes to these custom streams and output is routed correctly.

    2. In run mode: ThreadLocalStreamProxy is installed for sys.stdout/sys.stderr. During cell execution, set_thread_local_streams() registers the per-thread streams.

    3. For mo.Thread: The thread's context has stdout = None and stderr = None, so redirect_streams is a no-op. The print_override function is needed to route output.

    The key issue is that print_override is set in the module's __dict__, which breaks Numba's identity check for print. But for non-thread cases, sys.stdout redirection is already sufficient.

    The fix should be:

    1. Don't pass print_override to patch_main_module - remove the print override from the module's __dict__
    2. Keep print_override functional for mo.Thread - but since print isn't in the module globals anymore, threads won't automatically use it

    Wait, let me think more carefully. When a mo.Thread runs, what does print() resolve to?

    In Python, print() inside a thread's function would resolve from:

    1. Local scope
    2. Enclosing scopes
    3. Global scope (the module's __dict__)
    4. Builtins

    If we remove print from the module's __dict__, then print() in a thread would resolve to builtins.print, which writes to sys.stdout. But in a thread, sys.stdout is the same as the main process's sys.stdout (either ThreadSafeStdout or ThreadLocalStreamProxy). This might route the output to the wrong cell.

    Let me check what happens with sys.stdout inside a thread more carefully:

  21. Qwen Assistant

    Let me look at how the mo.Thread's stream is set up:

  22. Qwen Assistant

    Now I see the issue more clearly:

    1. For mo.Thread, a new stream is created with redirect_console=False and the same cell_id as the parent. The thread's stdout and stderr are set to None.

    2. Since stdout/stderr are None, redirect_streams() becomes a no-op, so sys.stdout/sys.stderr are NOT changed inside the thread.

    3. The print_override function is the only mechanism that routes output from threads correctly - it checks the thread's context and sends output via broadcast_notification to the stream.

    The key insight is: print_override needs to work inside the thread, but it doesn't need to be in the module's __dict__ for the main thread. Instead, we should:

    1. Not set print_override in the main module's globals - this preserves builtin print identity for Numba
    2. Set print to print_override only inside mo.Thread.run() - this ensures thread output is routed correctly

    Let me check the Thread.run() method more closely:

  23. Qwen Assistant

    Now I have a clear plan. The solution is:

    1. Don't pass print_override to patch_main_module (or pass None) - this keeps print as the builtin in the module's globals, satisfying Numba's identity check.

    2. Modify mo.Thread.run() to inject print_override into the module's globals at thread start time and restore it at thread end. This ensures print inside a thread uses the overridden version.

    Let me first create a test script to reproduce the issue:

  24. Qwen Assistant

    The module isn't installed in the system path, let me use the virtual environment.

  25. Qwen Assistant

    This confirms the issue. When print_override is passed to create_main_module, the print in the module's __dict__ is no longer the builtin print, which breaks Numba's identity check.

    Now let me verify the fix approach. The plan is:

    1. Don't override print at module creation time (pass None for print_override)
    2. Have mo.Thread set up print_override in its module's globals when the thread starts

    Let me check the relevant files and make the changes:

  26. Qwen Assistant

    Now let's implement the fix. First, let's modify the print_override.py - we need to ensure the function is still available, but we won't install it at module level:

  27. Qwen Assistant

    Now let me modify the threads.py to set up and tear down print override in the module globals:

  28. Qwen Assistant

    Now let me implement the changes. The key changes are:

    1. In threads.py: Override print in the module's __dict__ when a mo.Thread starts, and restore it when the thread ends.
    2. In runtime.py: Don't pass print_override to the kernel's main module (pass None instead).

    Let me start with the threads.py change:

  29. Qwen Assistant

    I need to fix the edit command syntax. The --file option should be used correctly. Let me use the correct syntax.

  30. Qwen Assistant

    It seems like the file got partially replaced incorrectly. Let me restore it and try again:

  31. Qwen Assistant

    Good, the file is restored. Let me now make the changes properly using the heredoc syntax:

  32. Qwen Assistant

    The imports are updated. Now I need to modify the run method to inject print_override into the module's globals. Let me see the current run method:

  33. Qwen Assistant

    Now I'll update the run method to override print in the module's __dict__:

  34. Qwen Assistant

    The threads.py file is updated. Now I need to modify the runtime.py to NOT pass print_override to the kernel's main module:

  35. Qwen Assistant

    Now let me also check if the import is still needed in runtime.py:

  36. Qwen Assistant

    The import is still there but no longer used. Let me remove it:

  37. Qwen Assistant

    Now let me also check that the import for print_override isn't used anywhere else in runtime.py:

  38. Qwen Assistant

    Good, the import is removed and the only reference is the None value. Now let's run the tests to verify the changes work:

  39. Qwen Assistant

    There's a circular import issue. threads.py imports print_override, and print_override.py imports THREADS from threads.py. I need to handle this differently.

    Let me move the import to inside the run method to avoid the circular import:

  40. Qwen Assistant

    Let me now make the changes more carefully, avoiding the circular import:

  41. Qwen Assistant

    Now let me write the updated file with the import inside the method:

  42. Qwen Assistant

    Now let me also revert the changes to runtime.py (since we need to re-apply them properly):

  43. Qwen Assistant

    Now apply the change to remove the print_override from the kernel:

  44. Qwen Assistant

    Also remove the unused import:

  45. Qwen Assistant

    Now let's run the tests:

  46. Qwen Assistant

    All tests pass. Now let me create a test script to verify that the fix works for the Numba case:

  47. Qwen Assistant

    The fix works. Now let me clean up and run some more tests to make sure I haven't broken anything:

  48. Qwen Assistant

    Let me run the thread-related tests:

  49. Qwen Assistant

    All thread-related tests pass, including the test_thread_print test. Let me also run some broader tests to make sure I haven't broken anything else:

  50. Qwen Assistant

    The only failure is unrelated to our change (it's a PermissionError from os.setsid() which is a container permission issue, not related to our changes). Let me verify by checking if this test was already failing before my changes:

  51. Qwen Assistant

    The test was already failing before my changes. Let me restore my changes:

  52. Qwen Assistant

    The changes have been restored. Let me continue with testing to make sure everything works correctly.

  53. Qwen Assistant

    All thread tests pass, including test_thread_print. Let me also run a broader set of tests to make sure nothing else is broken, particularly around the patches module and the kernel lifecycle.

  54. Qwen Assistant

    The user is reminding me that I need to use a tool call. Let me continue running tests to verify my changes.

  55. Qwen Assistant

    Let me check if there are any other places where print_override is used that might need updating:

  56. Qwen Assistant

    Let me verify the test that checks thread print behavior is working correctly:

  57. Qwen Assistant

    The user hasn't said anything new. The shell prompt is just showing. I should continue verifying my changes and make sure everything is working. Let me review what I've done and consider edge cases.

    Let me think about edge cases:

    1. Multiple concurrent mo.Threads: Each thread sets print in __main__.__dict__ when it starts and restores it when it ends. If two threads run concurrently, there could be a race condition where one thread's restoration overwrites another thread's override. However, since both are setting it to print_override, this should be fine.

    2. Nested mo.Threads: If a mo.Thread spawns another mo.Thread, the inner thread will also set up print_override. When the inner thread finishes, it will restore the previous value, which should be print_override from the outer thread. This should work correctly.

    3. Thread exception: If an exception occurs in the thread's run() method, the finally block should still execute and clean up properly. I have this covered with the try/finally block.

    4. Non-kernel context: If _marimo_ctx is None (e.g., running in script mode), the thread won't set up the print override. This is probably fine since in script mode, print doesn't need special routing.

    Wait, let me check - in the current implementation, the print override is only set up if self._marimo_ctx is not None. But actually, looking at my code, the print override setup happens regardless of whether _marimo_ctx is None. Let me check my implementation again...

    Actually, looking at my code:

    def run(self) -> None:
        if self._marimo_ctx is not None:
            try:
                initialize_context(self._marimo_ctx)
            except RuntimeError:
                pass
    
        output = CellOutputList()
        if self._marimo_ctx is not None:
            if (exec_ctx := self._marimo_ctx.execution_context) is not None:
                output = exec_ctx.output
    
        if isinstance(self._marimo_ctx, KernelRuntimeContext):
            self._marimo_ctx.execution_context = ExecutionContext(...)
        thread_id = threading.get_ident()
        THREADS.add(thread_id)
    
        # Override print in __main__ ...
        from marimo._messaging.print_override import print_override
        main_mod = sys.modules.get("__main__")
        old_print = main_mod.__dict__.get("print") if main_mod is not None else None
        if main_mod is not None:
            main_mod.__dict__["print"] = print_override
    
        try:
            super().run()
        finally:
            ...
    

    The print override is set up regardless of _marimo_ctx. But wait, if _marimo_ctx is None, the thread's ID is still added to THREADS, so print_override would think it's a marimo thread and try to get the context. Let me check what happens when get_context() fails:

    In print_override:

    try:
        ctx = get_context()
    except ContextNotInitializedError:
        _original_print(*args, **kwargs)
        return
    

    So if there's no context, it falls back to the original print. This is correct.

    But actually, there's a subtle issue: if _marimo_ctx is None, the thread is added to THREADS but no context is initialized. So print_override will always fall back to _original_print. This is fine for script mode where print routing isn't needed.

    However, I should consider whether we even need to override print if _marimo_ctx is None. Let me think...

    Actually, the print_override function checks if the thread ID is in THREADS. If the thread is in THREADS but has no context, it just calls _original_print. So it's a no-op in that case. The only overhead is the function call itself.

    For the case where _marimo_ctx is not None, the context is initialized and the print override will work correctly.

    I think my implementation is correct. Let me also make sure the thread cleanup happens even if _marimo_ctx is None. Looking at my code:

    try:
        super().run()
    finally:
        if main_mod is not None:
            if old_print is not None:
                main_mod.__dict__["print"] = old_print
            elif "print" in main_mod.__dict__:
                del main_mod.__dict__["print"]
        THREADS.remove(thread_id)
        teardown_context()
    

    Wait, THREADS.remove(thread_id) and teardown_context() are in the finally block, so they always run. But the original code had them outside any try/except, and THREADS.add(thread_id) happens before the try block. So if an exception occurs during the setup (before super().run()), the thread ID might be added to THREADS but never removed.

    Actually, looking more carefully at my code, the try/finally wraps super().run(), and THREADS.add(thread_id) happens before the try block. So if an exception occurs between THREADS.add(thread_id) and super().run(), the finally block would still run and remove the thread ID. But wait, teardown_context() is also in the finally block, which might fail if no context was initialized.

    Let me check the original code more carefully:

    def run(self) -> None:
        if self._marimo_ctx is not None:
            try:
                initialize_context(self._marimo_ctx)
            except RuntimeError:
                pass
    
        output = CellOutputList()
        if self._marimo_ctx is not None:
            if (exec_ctx := self._marimo_ctx.execution_context) is not None:
                output = exec_ctx.output
    
        if isinstance(self._marimo_ctx, KernelRuntimeContext):
            self._marimo_ctx.execution_context = ExecutionContext(...)
        thread_id = threading.get_ident()
        THREADS.add(thread_id)
        super().run()
        THREADS.remove(thread_id)
        teardown_context()
    

    In the original code, if super().run() raises an exception, THREADS.remove(thread_id) and teardown_context() wouldn't run. My fix addresses this by putting them in a finally block.

    But actually, I should also handle the case where teardown_context() might fail if no context was initialized. Let me check what teardown_context() does:

    Actually, looking at the original code, teardown_context() is called unconditionally at the end. So it should handle the case where no context was initialized. Let me check if this is the case.

    Let me also consider: should I only set up the print override if _marimo_ctx is not None? This would avoid unnecessary overhead for threads that don't need it. But actually, looking at the __init__ method, _marimo_ctx is only set if runtime_context_installed() returns True. So if _marimo_ctx is None, we're not in a marimo kernel context, and print override isn't needed anyway.

    Actually, let me reconsider. The current code adds the thread ID to THREADS regardless of whether _marimo_ctx is set. This means print_override will check for the context and fall back to original print if no context. But if we're not in a kernel context, we probably don't want to add to THREADS at all.

    Wait, but the original code also adds to THREADS regardless. So my change maintains the same behavior.

    Let me also think about whether there are any issues with the print override being set on __main__ module. In a kernel context, __main__ is the module created by patch_main_module. Each kernel has its own __main__ module, so different notebooks running in different kernels would have different modules. But within the same kernel, there's only one __main__ module, so concurrent mo.Threads in the same kernel would share the same module.

    If two concurrent threads both set print to print_override, and one finishes and restores the old value (which would be print_override from the other thread), the other thread would still work correctly because print_override is still in place.

    Wait, but if the first thread was the only one that set print_override, and it restores old_print which was None (meaning print wasn't in the dict before), then the second thread's print calls would use the builtin print instead of print_override. But actually, old_print would be None only if print was never in __main__.__dict__. If another thread had already set it to print_override, old_print would be print_override.

    Let me trace through the scenario:

    1. Main thread: print is not in __main__.__dict__ (our fix)
    2. Thread A starts: old_print = main_mod.__dict__.get("print") -> None, sets print = print_override
    3. Thread B starts: old_print = main_mod.__dict__.get("print") -> print_override, sets print = print_override
    4. Thread A finishes: old_print is None, so it checks "print" in main_mod.__dict__ -> True, so it deletes print. BUG! This removes the print override that Thread B needs.

    This is a problem! I need to fix this. Instead of deleting when old_print is None, I should only restore if the current value is the one I set.

    Actually, let me reconsider. The issue is that concurrent threads can interfere with each other's print restoration. A better approach might be to use a reference count or just leave print_override in place once it's set.

    Actually, the simplest fix is to not delete print if old_print is None. Instead, just leave print_override in place. This way, even if one thread finishes, another thread's print calls still work.

    But wait, this means print would never be restored to the builtin after all threads finish. Is that a problem?

    Hmm, looking at the original behavior, print was always print_override in the module, so this isn't a regression. The original code always set print_override at module creation time, and it never went back to the builtin.

    But the issue is that we want print to be the builtin for Numba compatibility. If we leave print_override in place after a thread runs, Numba would still fail.

    Let me think about this differently. The goal is:

    1. In the main thread (not in mo.Thread), print should be the builtin.
    2. In a mo.Thread, print should route output correctly.

    For the main thread, we're not setting print_override anymore, so print resolves to builtin. For mo.Threads, we set print_override when the thread starts and restore when it ends.

    The concurrent thread issue: if Thread A finishes and removes print, Thread B's subsequent print calls would use the builtin. But Thread B's ID is still in THREADS, so if we had kept print_override as a global override, it would still route correctly.

    The problem is that without print being print_override in the module's dict, Thread B's print calls go to the builtin print, which writes to sys.stdout. In edit mode, sys.stdout is a ThreadSafeStdout, which would route to the current cell, not the thread's cell.

    Wait, but in a mo.Thread, stdout is set to None, and redirect_streams is a no-op. So sys.stdout in the thread is the same as the main thread's sys.stdout. If that's a ThreadSafeStdout, it would route to the main cell, not the thread's cell.

    So we do need print_override for thread output routing. And we need it to be in the module's dict while any mo.Thread is running.

    Let me fix the concurrent thread issue with a reference count:

    <tool_call> <function=bash_terminal> <parameter=command> cat > /tmp/threads_new.py << 'ENDOFFILE'

    Copyright 2026 Marimo. All rights reserved.

    from future import annotations

    import sys import threading from typing import Any

    from marimo._messaging.streams import ThreadSafeStream from marimo._output.rich_help import mddoc from marimo._runtime.cell_lifecycle_item import CellLifecycleItem from marimo._runtime.cell_output_list import CellOutputList from marimo._runtime.context.kernel_context import KernelRuntimeContext from marimo._runtime.context.script_context import ScriptRuntimeContext from marimo._runtime.context.types import ( ExecutionContext, RuntimeContext, get_context, initialize_context, runtime_context_installed, teardown_context, )

    Set of thread ids for running mo.Threads

    THREADS: set[int] = set()

    Reference count for print override in main module globals.

    Incremented when a mo.Thread starts, decremented when it ends.

    print_override is installed in main when the count goes from 0 to 1,

    and removed when it goes back to 0.

    _print_override_count = 0 _print_override_lock = threading.Lock()

    @mddoc class Thread(threading.Thread): """A Thread subclass that can communicate with the frontend.

    `mo.Thread` has the same API as threading.Thread,
    but `mo.Thread`s are able to communicate with the marimo
    frontend, whereas `threading.Thread` can't.
    
    Threads can append to a cell's output using `mo.output.append`, or to the
    console output area using `print`. The corresponding outputs will be
    forwarded to the frontend.
    
    Writing directly to sys.stdout or sys.stderr, or to file descriptors 1 and
    2, is not yet supported.
    
    **Thread lifecycle.** When the cell that spawned this thread is invalidated
    (re-run, deleted, interrupted, or otherwise errored), this thread's
    `should_exit` property will evaluate to `True`, at which point it
    is the developer's responsibility to clean up their thread.
    
    Examples:
        ```python
        def target():
            import time
            import marimo as mo
    
            thread = mo.current_thread()
            while not thread.should_exit:
                time.sleep(1)
                print("hello")
        ```
    
        ```python
        import marimo as mo
    
        mo.Thread(target=target).start()
        ```
    """
    
    def __init__(self, *args: Any, **kwargs: Any) -> None:
        super().__init__(*args, **kwargs)
    
        self._marimo_ctx: RuntimeContext | None = None
        exit_event = threading.Event()
        self._exit_event = exit_event
    
        if not runtime_context_installed():
            return
    
        class ThreadLifecycle(CellLifecycleItem):
            def create(self, context: RuntimeContext) -> None:
                del context
    
            def dispose(self, context: RuntimeContext, deletion: bool) -> bool:
                del context
                del deletion
                exit_event.set()
                return True
    
        ctx = get_context()
        ctx.cell_lifecycle_registry.add(ThreadLifecycle())
    
        if isinstance(ctx, KernelRuntimeContext):
            self._marimo_ctx = KernelRuntimeContext(**ctx.__dict__)
            # standard IO is not yet threadsafe
            self._marimo_ctx.stdout = None
            self._marimo_ctx.stderr = None
            if isinstance(ctx.stream, ThreadSafeStream):
                self._marimo_ctx.stream = type(ctx.stream)(
                    pipe=ctx.stream.pipe,
                    # TODO(akshayka): stdin is not threadsafe
                    input_queue=ctx.stream.input_queue,
                    cell_id=ctx.stream.cell_id,
                    redirect_console=False,
                )
            else:
                raise RuntimeError(
                    "Unsupported stream type " + str(type(ctx.stream))
                )
        elif isinstance(self._marimo_ctx, ScriptRuntimeContext):
            # Standard streams are not rerouted when running as a script, so no
            # need to set to None
            self._marimo_ctx = ScriptRuntimeContext(**ctx.__dict__)
            if isinstance(ctx.stream, ThreadSafeStream):
                self._marimo_ctx.stream = ThreadSafeStream(
                    pipe=ctx.stream.pipe,
                    input_queue=ctx.stream.input_queue,
                    cell_id=ctx.stream.cell_id,
                    redirect_console=False,
                )
            else:
                raise RuntimeError(
                    "Unsupported stream type " + str(type(ctx.stream))
                )
    
    @property
    def should_exit(self) -> bool:
        """Whether this thread should exit.
    
        Returns `True` when the cell that spawned this thread has been invalidated;
        for example, if the cell:
    
        - was re-run
        - was deleted
        - was interrupted
    
        then this property evaluates to True.
    
        It is the developer's responsibility to clean up and finish their
        thread when this flag is set. Retrieve the current `mo.Thread` with
    
        ```python
        import marimo as mo
    
        mo.current_thread()
        ```
        """
        return self._exit_event.is_set()
    
    def run(self) -> None:
        global _print_override_count
    
        if self._marimo_ctx is not None:
            try:
                initialize_context(self._marimo_ctx)
            except RuntimeError:
                pass
    
        output = CellOutputList()
        if self._marimo_ctx is not None:
            if (exec_ctx := self._marimo_ctx.execution_context) is not None:
                # Share the parent's CellOutputList so appends from threads
                # are visible to the main execution context.
                output = exec_ctx.output
    
        if isinstance(self._marimo_ctx, KernelRuntimeContext):
            self._marimo_ctx.execution_context = ExecutionContext(
                cell_id=self._marimo_ctx.stream.cell_id,  # type: ignore
                setting_element_value=False,
                output=output,
            )
        thread_id = threading.get_ident()
        THREADS.add(thread_id)
    
        # Override print in __main__ so output from this thread is routed to
        # the correct cell. Use a reference count so that concurrent threads
        # don't interfere with each other.
        # Import here to avoid circular import (print_override imports THREADS
        # from this module).
        from marimo._messaging.print_override import print_override
    
        install_print_override = False
        with _print_override_lock:
            _print_override_count += 1
            if _print_override_count == 1:
                # First thread: install print override
                main_mod = sys.modules.get("__main__")
                if main_mod is not None and "print" not in main_mod.__dict__:
                    main_mod.__dict__["print"] = print_override
                    install_print_override = True
    
        try:
            super().run()
        finally:
            with _print_override_lock:
                _print_override_count -= 1
                if _print_override_count == 0 and install_print_override:
                    # Last thread finished: remove print override
                    main_mod = sys.modules.get("__main__")
                    if main_mod is not None and "print" in main_mod.__dict__:
                        del main_mod.__dict__["print"]
            THREADS.remove(thread_id)
            teardown_context()
    

    def current_thread() -> Thread: """Return the marimo.Thread object for the caller's thread of control.

    Returns:
        The current `marimo.Thread` object.
    
    Raises:
        RuntimeError: If the current thread of control is not a `marimo.Thread`.
    """
    thread = threading.current_thread()
    if not isinstance(thread, Thread):
        raise RuntimeError(
            "mo.current_thread() must be called from a "
            "thread created with mo.Thread."
        )
    return thread
    

    def is_marimo_thread() -> bool: try: current_thread() return True except RuntimeError: return False ENDOFFILE cp /tmp/threads_new.py /marimo/marimo/_runtime/threads.py </tool_call>

  58. Qwen Assistant

    I need to use a proper tool call format.

  59. Qwen Assistant

    Now let me run the tests again to make sure the changes work correctly:

  60. Qwen Assistant

    All tests pass. Let me create a comprehensive test script to verify the fix handles both the Numba case and concurrent threads:

  61. Qwen Assistant

    All tests pass. Let me clean up the test file and run a broader set of tests to ensure the changes don't break anything else.

  62. Qwen Assistant

    Let me run a broader set of tests to ensure nothing is broken:

  63. Qwen Assistant

    The only failure is a pre-existing permission issue unrelated to my changes (confirmed earlier). Let me run more tests excluding that one:

  64. Qwen Assistant

    All tests pass (except for the pre-existing permission issue unrelated to my changes). Let me verify my final changes by reviewing the diff:

  65. Qwen Assistant

    Let me review my changes one more time and submit the solution.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.