Skip to content
TheChatArchiveThe Chat Archive
xiaomi/mimo-v2.5-pro· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Marimo's print routing breaks Numba compilation In notebooks that do…

  1. User

    ISSUE DESCRIPTION

    Marimo's print routing breaks Numba compilation

    In notebooks that do not use mo.Thread, print must retain builtin identity so Numba can compile functions that call it. mo.Thread must continue routing output to the spawning cell, with output isolation between concurrent threads.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /marimo, current file: none) bash-$

  2. Assistant

    Let me analyze the issue. The problem is about Marimo's print routing breaking Numba compilation. The key points are:

    1. In notebooks that don't use mo.Thread, print must retain builtin identity so Numba can compile functions that call it.
    2. mo.Thread must continue routing output to the spawning cell, with output isolation between concurrent threads.

    Let me first explore the repository to understand the structure and find relevant code related to print routing.

  3. Assistant

    Let me look at the repository structure more carefully.

  4. Assistant

    Let me search for print routing related code in the repository.

  5. Assistant

    Let me explore the key files related to print routing.

  6. Assistant

    Let me understand the issue better. Let me look at where this print_override is used.

  7. Assistant

    Now let me understand the issue better. The problem is that when marimo overrides print to route output to the correct cell in threads, it breaks Numba compilation because Numba expects print to be the builtin function.

    Let me find where print_override is used and how it replaces the builtin print.

  8. Assistant

    Let me look at the patches.py file to understand how print is being overridden.

  9. Assistant

    Let me look at how the print override is used in the runtime.

  10. Assistant

    Let me look at the context around line 2542 in runtime.py.

  11. Assistant

    Now let me understand how the stream redirects console output.

  12. Assistant

    Let me check the kernel_lifecycle.py to understand how print override is passed through:

  13. Assistant

    Let me look at the test file for print_override:

  14. Assistant

    Now let me look at the test helper session to understand how print_override is used:

  15. Assistant

    Now let me look at the Pyodide session:

  16. Assistant

    Let me look at the thread-related tests:

  17. Assistant

    Let me look at the thread tests to understand how they work:

  18. Assistant

    Let me now understand the full picture. I need to create a test script to reproduce the Numba compilation issue:

  19. Assistant

    Now I understand the problem clearly. The issue is:

    1. Marimo overrides print in the __main__ module with print_override (which is a regular Python function, not the builtin)
    2. Numba checks if print is builtins.print (identity check), and since it's replaced with a custom function, Numba fails to compile
    3. The fix should: not install print_override into __main__ by default, and only install it when mo.Thread is actually running

    Let me understand the flow:

    • patches.create_main_module() replaces print in __main__.__dict__ with print_override
    • print_override checks if we're in a marimo thread; if not, it just calls _original_print
    • The problem is that even though print_override behaves the same as print, it's a different object (not builtins.print), which breaks Numba

    The solution:

    1. Don't install print_override into __main__ by default
    2. Instead, only install it when a mo.Thread starts running
    3. When a mo.Thread finishes, uninstall it (restore the builtin print)

    Wait, but there's a subtlety. If we install print_override only when a thread is running, the main thread's cells won't have print overridden. But the main thread cells already work because stdout is redirected to the frontend via the ThreadSafeStdout.Actually, let me re-read the print_override more carefully:

    @functools.wraps(print)
    def print_override(*args: Any, **kwargs: Any) -> None:
        """Override print to be aware of marimo threads.
    
        When running marimo without mo.Threads, this just forwards to the built-in
        print. When running with mo.Threads, it gets the threads cell ID and
        forwards the print message to the appropriate cell.
    
        This method is only necessary because the file descriptors for standard
        out and standard in are currently redirected, and sys.stdout is not
        always patched / is not aware of mo.Threads.
        """
        tid = threading.get_ident()
        if tid not in THREADS:
            _original_print(*args, **kwargs)
            return
        ...
    

    So when NOT in a thread, it just calls _original_print. This means for the main thread, print_override behaves exactly like the builtin print.

    The issue is that Numba checks identity, not behavior. Numba needs print is builtins.print to be True.

    So the fix is: don't install print_override into __main__ by default. Only install it when mo.Thread is active.

    But wait - the test test_thread_print shows that when a thread calls print("hello"), it should go to the thread's stream, not the main stdout. This requires print_override to be active.

    Let me think about this more carefully. The print_override function:

    1. If NOT in a marimo thread (tid not in THREADS) → calls _original_print (builtin print)
    2. If IN a marimo thread (tid in THREADS) → routes to the cell's output

    So for the main thread, print_override just delegates to the builtin. For threads, it routes output.

    The fix should be:

    1. Don't install print_override by default in __main__
    2. When a mo.Thread starts, install print_override into __main__
    3. When a mo.Thread finishes, remove print_override from __main__

    But this has a threading race condition. If multiple threads are running, and one finishes, we'd remove print_override while another thread is still using it.

    Actually, looking more carefully at the code, print_override doesn't just work via __main__ module's globals. The print function in Python looks up in the calling frame's globals and builtins. If print is not in the cell's globals, Python falls back to builtins.print.

    Wait, but create_main_module explicitly sets print in the module's __dict__. This means all code running in that module will use print_override instead of builtins.print.

    The key question: where do cells' code get their globals from?

    Looking at the runtime, cells execute with the kernel module's __dict__ as their globals. So when a cell does print("hello"), Python looks up print in the module globals first, finds print_override, and uses it.

    So the fix is:

    1. Don't install print_override in __main__ by default
    2. Only install it when mo.Thread is active

    For thread safety, we need to:

    • Install print_override when the first thread starts
    • Uninstall it when the last thread finishes

    Let me also look at the test test_thread_print more carefully. It imports print inside the thread's target function. Let me check...

    def target():
        global thread_stream
        import marimo as mo
        print("hello")
        print("world")
        thread_stream = mo._runtime.context.get_context().stream
    

    The print here will be looked up from the globals of the cell where the function was defined. Since the function is defined in a cell running in __main__, print resolves to whatever is in __main__.__dict__["print"].

    So if print_override is installed in __main__.__dict__, the thread's print calls will go through print_override. If not installed, they'll go to builtins.print.

    The question is: if we don't install print_override at all, will thread print calls still work?

    Looking at the thread setup, ThreadSafeStdout is set up for the main thread, but for threads, self._marimo_ctx.stdout = None. So the thread's sys.stdout might not be properly routed.

    Actually, let me check how sys.stdout works for threads. The thread creates its own context with redirect_console=False, which means the ThreadSafeStream doesn't redirect console output. The thread also has stdout=None in its context.So for threads, print (the builtin) would write to sys.stdout, which is the main thread's ThreadSafeStdout. This would route the output to the main cell, not the thread's cell. That's why print_override is needed for threads - it routes output to the correct cell.

    So the solution is:

    1. Don't install print_override in __main__ by default
    2. When a mo.Thread starts, install print_override in __main__
    3. When all mo.Threads finish, remove print_override from __main__

    This is exactly what the issue describes: "In notebooks that do not use mo.Thread, print must retain builtin identity".

    Let me implement this. I need to:

    1. Modify patches.py to not install print_override by default
    2. Modify threads.py to install/uninstall print_override when threads start/finish
    3. Keep the print_override function available for when it's needed

    Wait, but there's still a problem. If we install print_override into __main__ when a thread starts, then code running in the main thread at the same time will also see print_override. This is actually fine because:

    • For the main thread, print_override just calls _original_print
    • For threads, it routes to the correct cell

    The only issue is Numba compilation. If Numba is called while a thread is running, it would see print_override instead of builtins.print. But this is an edge case that's acceptable.

    Actually, let me reconsider. The issue says "In notebooks that do not use mo.Thread, print must retain builtin identity". This means the primary concern is notebooks that never use mo.Thread. For notebooks that use mo.Thread, having print_override installed is acceptable.

    So my plan is:

    1. Don't install print_override in __main__ by default
    2. When the first mo.Thread starts, install print_override in __main__
    3. When the last mo.Thread finishes, uninstall print_override from __main__

    Let me also look at the test to make sure this will work with the test test_thread_print.

    Actually, wait. Let me re-read the test:

    async def test_thread_print(k: Kernel, exec_req: ExecReqProvider) -> None:
        """Test that a thread starts, runs, and prints."""
        await k.run([
            exec_req.get("import marimo as mo"),
            exec_req.get("""
                stream = mo._runtime.context.get_context().stream
                thread_stream = None
                def target():
                    global thread_stream
                    import marimo as mo
                    print("hello")
                    print("world")
                    thread_stream = mo._runtime.context.get_context().stream
                t = mo.Thread(target=target); t.start(); t.join()
            """),
        ])
        # ...
        thread_stream = MockStream(k.globals["thread_stream"])
        assert len(thread_stream.operations) == 2
        assert "hello" in thread_stream.operations[0]["console"]["data"]
    

    So the test expects print("hello") to go to the thread's stream. With my fix, when mo.Thread starts, print_override will be installed in __main__, so the thread's print calls will go through print_override, which routes to the thread's cell.

    But wait - the function target is defined BEFORE the thread starts. So when target is compiled, print might not yet be in __main__.__dict__. When the function executes (in the thread), Python looks up print from the function's globals. Since target was defined in a cell running in __main__, its globals are __main__.__dict__. At execution time, if print_override has been installed, print will resolve to print_override.

    So this should work. Let me implement it.

    Actually, there's another subtlety. The function target is defined in cell 2. When cell 2 runs, it defines target and then calls t = mo.Thread(target=target); t.start(); t.join(). The t.start() call:

    1. Creates the thread
    2. Starts it3. The thread's run() method is called
    3. In run(), the thread adds its tid to THREADS and calls super().run()
    4. super().run() calls target()
    5. target() calls print("hello")
    6. Python looks up print from target.__globals__ which is __main__.__dict__

    So at step 7, if print_override is installed in __main__.__dict__, it will be used. If not installed, builtins.print will be used.

    My plan: install print_override in Thread.run() before calling super().run().

    Let me also check if there's a reference counting mechanism needed. If multiple threads are running, we need to:

    • Install print_override when the first thread starts
    • Uninstall it when the last thread finishes

    Let me implement this.

    Wait, actually let me reconsider. Looking at the THREADS set, it tracks active thread IDs. We can use the size of this set for reference counting. But we need to be careful about thread safety.

    Let me implement the changes:

    1. In patches.py: Don't install print_override in __main__ (just remove the line)
    2. In threads.py: Install print_override when the first thread starts, uninstall when the last finishes
    3. Need thread-safe reference counting

    Actually, let me look at this from a simpler perspective. The THREADS set is already thread-safe (it's a regular set, but Python's GIL protects simple operations). We can check len(THREADS) to know if we need to install/uninstall.

    But wait, we need to install BEFORE adding to THREADS (since the thread's run code will check THREADS). And uninstall AFTER removing from THREADS. Let me think about the ordering...

    Actually, the flow in Thread.run() is:

    THREADS.add(thread_id)
    super().run()  # user code runs here
    THREADS.remove(thread_id)
    

    So we need to install print_override before super().run() (so the user's code sees it) and uninstall after super().run() (when the user's code is done).

    But we also need reference counting. If two threads are running:

    1. Thread A starts: install print_override, add A to THREADS
    2. Thread B starts: print_override already installed, add B to THREADS
    3. Thread A finishes: remove A from THREADS, but don't uninstall (B is still running)
    4. Thread B finishes: remove B from THREADS, uninstall print_override

    Let me implement this with a counter.

    Hmm, but there's another issue. We need to install print_override into the __main__ module that the kernel is using. In threads.py, we don't have direct access to the kernel's module. But we can access sys.modules["__main__"].

    Let me check if sys.modules["__main__"] is the same as the kernel's module...

    Looking at patches.patch_main_module():

    def patch_main_module(...):
        _module = create_main_module(...)
        patch_sys_module(_module)
        return _module
    

    And patch_sys_module does:

    def patch_sys_module(module):
        sys.modules[module.__name__] = module
    

    Since the module is named "__main__", sys.modules["__main__"] is the kernel's module.

    So in threads.py, we can access sys.modules["__main__"] to install/uninstall print_override.

    Let me implement this:

    # In threads.py
    import sys
    import threading
    
    _active_thread_count = 0
    _print_override_lock = threading.Lock()
    
    def _install_print_override():
        global _active_thread_count
        with _print_override_lock:
            if _active_thread_count == 0:
                main_module = sys.modules.get("__main__")
                if main_module is not None:
                    from marimo._messaging.print_override import print_override
                    main_module.__dict__["print"] = print_override
            _active_thread_count += 1
    
    def _uninstall_print_override():
        global _active_thread_count
        with _print_override_lock:
            _active_thread_count -= 1
            if _active_thread_count == 0:
                import builtins
                main_module = sys.modules.get("__main__")
                if main_module is not None:
                    main_module.__dict__["print"] = builtins.print
    

    Wait, actually, instead of restoring builtins.print, I should just remove print from the module dict so it falls back to the builtins. Let me use pop instead.

    def _uninstall_print_override():
        global _active_thread_count
        with _print_override_lock:
            _active_thread_count -= 1
            if _active_thread_count == 0:
                main_module = sys.modules.get("__main__")
                if main_module is not None:
                    main_module.__dict__.pop("print", None)
    

    Hmm, but what if someone explicitly set print in the module dict for a reason? Well, in the current code, the only thing that sets it is print_override, so popping should be fine.

    Actually, I realize there's a simpler approach. We can just use the existing THREADS set. Since print_override already checks if tid not in THREADS and falls back to _original_print, we just need to make sure print_override is installed when threads are running.

    But there's a subtlety with the existing approach. The print_override function is a closure that captures _original_print. If we install/uninstall it dynamically, we need to make sure it's the same function object each time.

    Let me look at how print_override is defined:

    _original_print = print
    
    @functools.wraps(print)
    def print_override(*args: Any, **kwargs: Any) -> None:
        tid = threading.get_ident()
        if tid not in THREADS:
            _original_print(*args, **kwargs)
            return
        ...
    

    _original_print is captured as a module-level variable. print_override is a module-level function. So we can import it and use it directly.

    OK, let me finalize my approach:

    1. In patches.py: Don't install print_override by default. Remove the if print_override is not None: block.
    2. In threads.py: Add helper functions to install/uninstall print_override with reference counting.
    3. In Thread.run(): Call install before super().run() and uninstall after.

    Let me also check if there's any test that expects print to be print_override in __main__...

    Looking at the test test_print_override.py, it tests the print_override function directly, not through __main__. So it should be fine.

    Looking at test_thread_print, it tests that print("hello") in a thread goes to the thread's stream. This should still work because:

    1. Thread starts → print_override is installed in __main__
    2. Thread runs print("hello") → goes through print_override → routes to thread's cell
    3. Thread finishes → print_override is uninstalled from __main__

    The test also checks that the main thread's stream doesn't get the print output. This should still work because print_override checks tid not in THREADS and falls back to _original_print for the main thread.

    Wait, but in the test, the main thread doesn't call print while the thread is running. The cell just defines the target function and starts/joins the thread. So this test should pass.

    Let me also check if there are other tests that might be affected...

    Looking at the test file tests/_messaging/test_print_override.py, it directly imports and tests print_override, so it won't be affected by changes to __main__.

    Let me also check if there are tests that expect print to be print_override in __main__...

    I don't see any such tests. The tests test the behavior of print (i.e., that output goes to the right place), not the identity of print.

    OK, let me implement the changes.

    Actually, wait. Let me reconsider the approach. Instead of installing/uninstalling print_override dynamically, what if we just make print_override the builtin print itself? That is, instead of creating a new function, we modify builtins.print to check for threads?

    No, that's a terrible idea. It would affect all Python code, not just marimo.

    OK, let me go with the dynamic install/uninstall approach. Let me also think about edge cases:

    1. What if a thread creates another thread? The inner thread should also use print_override. With reference counting, this should work: the outer thread installs print_override, and the inner thread increments the counter. When the inner thread finishes, the counter is decremented but not zero, so print_override stays installed. When the outer thread finishes, the counter goes to zero and print_override is uninstalled.

    2. What if a thread throws an exception? We need to make sure print_override is uninstalled even on exception. We can use a try/finally block.

    3. What if the kernel is torn down while threads are running? The threads should be stopped by the cell lifecycle mechanism. But if they're not, print_override might stay installed. This is a minor issue that's acceptable.

    Let me implement the changes now.

    One more thing: I need to make sure the changes are minimal and don't break existing functionality. Let me check what the print_override parameter is used for in create_main_module and patch_main_module:

    def create_main_module(file, input_override, print_override, doc=None):
        ...
        if print_override is not None:
            _module.__dict__.setdefault("print", print_override)
        ...
    

    So it's only used to set print in the module dict. If I remove this, the module won't have print in its dict, so Python will fall back to builtins.print.

    For patch_main_module, it just calls create_main_module and then patches sys.modules.

    OK, let me implement the changes:

    1. In patches.py: Remove the if print_override is not None: block from create_main_module. Keep the parameter for backward compatibility but don't use it.

    2. In threads.py: Add reference counting and install/uninstall logic.

    3. In Thread.run(): Call install before super().run() and uninstall after.

    Let me also check if there are callers that pass print_override other than the kernel lifecycle...

    Looking at the grep results:

    • runtime.py: passes print_override_fn=print_override to KernelArgs
    • pyodide_session.py: passes print_override_fn=None
    • script_runner.py: passes print_override=None
    • kernel_runner.py: passes print_override=None
    • context/script_context.py: passes print_override=None
    • test session helper: passes print_override_fn=print_override

    So the only place that passes the actual print_override is runtime.py (and the test helper). All other places pass None.

    For the fix, I can:

    1. Remove the print_override parameter from create_main_module and patch_main_module (breaking change)
    2. Or keep the parameter but ignore it (backward compatible)

    I'll go with option 2 for backward compatibility.

    Actually, wait. Looking more carefully at the issue, it says "No new interfaces are introduced." So I should keep existing interfaces. I'll keep the parameter but ignore it.

    Let me also check if there are any other places where print_override is used that I need to change...

    Looking at the grep results:

    • print_override.py: defines the function
    • runtime.py: imports and passes it- threads.py: uses THREADS set
    • test_print_override.py: tests the function

    I don't need to change print_override.py or test_print_override.py. I need to:

    1. Change patches.py to not install print_override in __main__
    2. Change threads.py to install/uninstall print_override dynamically
    3. Optionally, clean up runtime.py to not pass print_override (but this is optional)

    Actually, wait. Let me re-read the issue more carefully:

    "Marimo's print routing breaks Numba compilation"

    "In notebooks that do not use mo.Thread, print must retain builtin identity so Numba can compile functions that call it."

    "mo.Thread must continue routing output to the spawning cell, with output isolation between concurrent threads."

    So the fix is:

    1. Don't install print_override in __main__ by default
    2. Only install it when mo.Thread is running
    3. Uninstall it when no mo.Thread is running

    This is exactly what I planned. Let me implement it.

    Let me also think about whether I need to change runtime.py. Currently, it passes print_override to KernelArgs. If I change create_main_module to ignore the print_override parameter, then passing it is harmless. But for clarity, I could also remove it from KernelArgs and the callers.

    But the issue says "No new interfaces are introduced." So I should keep existing interfaces. I'll keep the parameter but ignore it.

    Actually, I realize I should also check if there's a test that verifies print identity in __main__. Let me search...

    No, I don't see such a test. The tests verify behavior (output goes to the right place), not identity.

    OK, let me implement the changes now. Let me also run the existing tests to make sure they pass.

    Actually, let me think about one more thing. The _active_thread_count variable and _print_override_lock need to be accessible from Thread.run(). I'll define them in threads.py as module-level variables.

    Also, I need to make sure that print_override is imported correctly in threads.py. Currently, print_override is in marimo._messaging.print_override. I can import it in the helper functions.

    Let me also think about the case where sys.modules["__main__"] doesn't exist or has been replaced. This shouldn't happen in normal operation, but I'll add a guard.

    OK, let me write the code.

    Hmm, actually there's one more issue. When I uninstall print_override (by removing print from __main__.__dict__), I need to make sure that the print builtin is still accessible. Since __main__ has __builtins__ set, Python will fall back to builtins.print when print is not in __main__.__dict__.

    Let me verify this...

    Looking at create_main_module:

    _module.__dict__.setdefault("__builtin__", globals()["__builtins__"])
    _module.__dict__.setdefault("__builtins__", globals()["__builtins__"])
    

    So __builtins__ is set in the module dict. When print is not in the module dict, Python will look in __builtins__ and find builtins.print.

    OK, so removing print from __main__.__dict__ is safe. Python will fall back to builtins.print.

    Let me implement the changes now.

    Wait, actually, I realize I should also consider: what if the user explicitly sets print in their cell code? For example:

    print = lambda x: None
    

    In this case, print would be in __main__.__dict__ as the user's lambda. If a thread starts, we'd overwrite it with print_override. When the thread finishes, we'd remove it, and the user's lambda would be lost.

    Hmm, but this is an edge case. And the current code already overwrites print in create_main_module. So the user's lambda would already be overwritten.

    Wait, no. Looking at create_main_module:

    _module.__dict__.setdefault("print", print_override)
    

    It uses setdefault, which means it only sets print if it's not already in the dict. But since this is a fresh module (just created), print won't be in the dict. So it always sets print to print_override.

    But wait, what about when cells re-execute? The module dict is shared across cell executions. If a cell sets print = lambda x: None, then print in the module dict would be the lambda. But create_main_module is only called once (when the kernel starts), so setdefault won't overwrite the lambda.

    Hmm, but patch_main_module is also called once. So the flow is:

    1. Kernel starts: create_main_module sets print to print_override
    2. Cell A runs: print("hello") → goes through print_override
    3. Cell B runs: print = lambda x: None → overwrites print in __main__.__dict__
    4. Cell A re-runs: print("hello") → goes through the lambda (not print_override)

    So the current behavior already has this issue. My fix doesn't make it worse.

    Actually wait, let me re-read setdefault:

    _module.__dict__.setdefault("print", print_override)
    

    This means: if "print" is NOT in _module.__dict__, set it to print_override. If it IS already there, do nothing.

    Since _module is a fresh module (just created with types.ModuleType("__main__")), "print" won't be in its dict. So setdefault always sets it to print_override.

    But wait, does a fresh module have print in its dict? Let me check...

    import types
    m = types.ModuleType("__main__")
    print("print" in m.__dict__)  # False
    

    No, a fresh module doesn't have print in its dict. So setdefault always sets it.

    OK, so the current behavior is: print is always print_override in __main__. My fix changes this to: print is builtins.print by default, and only becomes print_override when threads are running.

    This is exactly what the issue asks for.

    Let me implement the changes now.

    One more thought: should I also clean up the print_override parameter from KernelArgs, create_main_module, and patch_main_module? The issue says "No new interfaces are introduced," but doesn't say anything about removing existing ones. However, removing the parameter would be a breaking change for any code that calls these functions directly.

    I'll keep the parameter for backward compatibility but ignore it in create_main_module.

    Actually, let me reconsider. If I keep the parameter but ignore it, then runtime.py would still pass print_override_fn=print_override to KernelArgs, which would be passed to patch_main_module, which would pass it to create_main_module, which would ignore it. This is a bit confusing.

    Alternatively, I could:

    1. Remove the print_override parameter from create_main_module and patch_main_module
    2. Update KernelArgs to remove print_override_fn
    3. Update all callers

    But this is a bigger change and might break external code.

    I think the safest approach is to keep the parameter but ignore it. I'll add a comment explaining why.

    Actually, let me look at the issue again: "No new interfaces are introduced." This means I shouldn't ADD new interfaces. I can still remove or modify existing ones if needed.

    But to be safe, I'll keep the parameter and just ignore it. This way, existing code that passes print_override won't break.

    Let me implement the changes now.

    OK, I'm going to implement the following changes:

    1. patches.py: In create_main_module, remove the lines that install print_override into the module dict. Keep the parameter but ignore it.

    2. threads.py: Add helper functions _install_print_override() and _uninstall_print_override() with reference counting. Modify Thread.run() to call these functions.

    Let me write the code.

  20. Assistant

    Now I have a clear understanding of the problem and solution. Let me implement the fix.

    The fix is:

    1. In patches.py: Don't install print_override in __main__.__dict__ by default
    2. In threads.py: Install/uninstall print_override in __main__.__dict__ when mo.Thread starts/finishes, using reference counting for concurrent threads

    Let me implement this:

  21. Assistant

    Now let me make the first change - remove the print_override injection from create_main_module in patches.py:

  22. Assistant

    Let me use the edit command correctly.

  23. Assistant

    Now I need to modify threads.py to install/uninstall print_override dynamically when threads start/finish. Let me implement this:

  24. Assistant

    Let me look at the rest of the file to see the run() method:

  25. Assistant

    Now I need to modify Thread.run() to install/uninstall print_override dynamically. Let me implement this:

  26. Assistant

    Let me verify the changes by looking at the file:

  27. Assistant

    Good. Now let me run the existing tests to make sure they pass:

  28. Assistant

    Need to install dependencies first.

  29. Assistant

    Now let me run the tests again:

  30. Assistant

    Need to install pytest-asyncio.

  31. Assistant

    Let me run the tests again with the correct pytest-asyncio setup.

  32. Assistant

    All thread tests pass. Now let me run the print_override tests:

  33. Assistant

    Let me now run a broader set of tests to make sure I haven't broken anything. Let me first create a test script to verify that print retains builtin identity when no threads are running:

  34. Assistant

    The issue is that types.ModuleType doesn't automatically have __builtins__ exposed as attributes. Let me check how it actually works in the kernel context:

  35. Assistant

    Good - when print is not in the module's __dict__, Python falls back to __builtins__, which contains the real builtin print. Let me verify this works in the actual kernel context:

  36. Assistant

    Let me now run the broader test suite to make sure I haven't broken anything:

  37. Assistant

    Let me try without the timeout flag:

  38. Assistant

    The error is a missing dependency, not related to my changes. Let me skip that test file and run the rest.

  39. Assistant

    That failure is unrelated to my changes (it's an environment issue - running as root). Let me run the tests specifically related to our changes:

  40. Assistant

    The only failure is test_non_windows_does_not_change_event_loop_policy which seems unrelated to my changes. Let me check what that test does:

  41. Assistant

    That test failure is unrelated to my changes (it's about asyncio event loop policy). Let me check if it fails without my changes:

  42. Assistant

    Good, the failure is pre-existing (PermissionError when running as root), not related to my changes. Let me restore my changes:

  43. Assistant

    Now let me also run the test for patches:

  44. Assistant

    All tests pass. Now let me write a test to verify that print retains builtin identity when no threads are running:

  45. Assistant

    The verification shows the fix works correctly:

    1. When no thread is running, print resolves to builtins.print ✓
    2. When a thread starts, print_override is installed ✓
    3. When the thread finishes, print_override is removed ✓

    Let me now run a broader set of tests to ensure nothing else is broken:

  46. Assistant

    Missing dependency. Let me run just the messaging tests that don't have missing deps.

  47. Assistant

    All messaging tests pass. Let me also run the runtime tests more broadly (excluding the pre-existing failures):

  48. Assistant

    Excellent! All 289 runtime tests pass (except the pre-existing event loop failure). Let me now verify the changes are correct by looking at the diff:

  49. Assistant

    The diff looks clean and correct. Let me run a few more test suites to make sure nothing is broken:

  50. Assistant

    All 21 thread-local proxy tests pass. Let me now run a broader set of tests to make sure nothing is broken:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.