Skip to content
TheChatArchiveThe Chat Archive
GLMz-ai/glm-5.2· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Marimo's print routing breaks Numba compilation In notebooks that do…

  1. User

    ISSUE DESCRIPTION

    Marimo's print routing breaks Numba compilation

    In notebooks that do not use mo.Thread, print must retain builtin identity so Numba can compile functions that call it. mo.Thread must continue routing output to the spawning cell, with output isolation between concurrent threads.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /marimo, current file: none) bash-$

  2. GLM Assistant

    Let me explore the repository structure to understand the codebase and find the relevant files.

  3. GLM Assistant

    Now let me find where print_override is installed as the builtin print.

  4. GLM Assistant

    So the issue is that print is being overridden in the __main__ module's __dict__, which means print is no longer the builtin print. When Numba tries to compile functions that call print, it relies on the builtin identity of print (i.e., print is builtins.print). Since marimo overrides print in the module globals, Numba can't compile it.

    Let me look at the threads.py to understand mo.Thread.

  5. GLM Assistant

    Let me understand how stdout is patched and how print_override came about.

  6. GLM Assistant

    Let me look at the stdout/stream handling in the kernel context.

  7. GLM Assistant

    Let me look at the kernel context and how stdout is assigned per execution context.

  8. GLM Assistant

    Let me look at the RuntimeContext base class and how stdout is used during execution.

  9. GLM Assistant

    So the context is thread-local. Each thread has its own runtime context. So get_context() returns the thread's context. When a mo.Thread runs, it installs its own context (thread-local), with its own stream and stdout.

    Now, the issue is sys.stdout is a global. Let me find where sys.stdout is redirected during cell execution.

  10. GLM Assistant

    There's a ThreadLocalStreamProxy. Let me look at redirect_streams.py.

  11. GLM Assistant

    Now let me look at thread_local_streams.py - the ThreadLocalStreamProxy.

  12. GLM Assistant

    Let me look at the runtime.py streams setup and how stdout is installed.

  13. GLM Assistant

    Let me check where the ThreadLocalStreamProxy is installed and how run mode uses it.

  14. GLM Assistant

    Let me look at the existing tests for threads and print_override.

  15. GLM Assistant

    Let me look at the conftest to understand the test kernel setup.

  16. GLM Assistant

    Let me look at the MockStdout and the test streams.

  17. GLM Assistant

    Let me look at how print output is checked in non-thread tests and how the kernel executes cells.

  18. GLM Assistant

    Let me run the existing thread tests to establish a baseline.

  19. GLM Assistant

    Let me install the package's dependencies properly.

  20. GLM Assistant

    Now let me reproduce the issue. Let me check if numba is available and write a reproduction.

  21. GLM Assistant

    Let me write a reproduction script using the test infrastructure to confirm print is overridden in the kernel globals.

  22. GLM Assistant

    Confirmed: print in kernel globals is NOT builtins.print. Let me write a proper reproduction using k.run.

  23. GLM Assistant

    Let me examine the console output worker / buffered_writer to understand how writes are merged.

  24. GLM Assistant

    Let me check the Python version and try installing numba to test empirically.

  25. GLM Assistant

    Numba installed. Let me test how Numba handles print when print is overridden in globals vs. builtin, and when builtins.print is replaced.

  26. GLM Assistant

    The empirical test confirms: replacing builtins.print does NOT fix Numba (Numba caches the original). The only fix is to NOT have print in module globals AND not replace builtins.print. Let me search for all tests and usages related to print routing.

  27. GLM Assistant

    There's a dedicated test file for print_override. Let me read it.

  28. GLM Assistant

    Let me check recent git history on the relevant files to understand the migration state.

  29. GLM Assistant

    Let me test Numba when print in globals IS the true builtin object.

  30. GLM Assistant

    Let me check the test landscape to understand potential breakage. Let me run the relevant test suites to get a baseline.

  31. GLM Assistant

    Let me examine the capture module and its tests, which interact with sys.stdout.

  32. GLM Assistant

    Let me look at kernel_session in kernel_lifecycle.py to understand where the kernel context is set up.

  33. GLM Assistant

    I've confirmed the issue. Let me check whether any tests assert that print is in the kernel globals or rely on the eager installation.

  34. GLM Assistant

    Let me verify Kernel.globals returns the live main module dict.

  35. GLM Assistant

    I have a clear, low-risk plan. Let me verify Kernel.globals returns the live dict (confirmed: self._module.__dict__). Now let me implement.

    First, remove the eager print installation from create_main_module:

  36. GLM Assistant

    Let me remove the eager print install (lines 199-200) and add an explanatory comment.

  37. GLM Assistant

    Now let me add a clarifying comment about why print is no longer installed eagerly.

  38. GLM Assistant

    Now let me update mo.Thread.run() to lazily install the print override. Let me view the current run() method.

  39. GLM Assistant

    Now let me edit the run() method to install the print override lazily and use try/finally for cleanup:

  40. GLM Assistant

    Now let me verify the fix with the reproduction script.

  41. GLM Assistant

    Now print is builtins.print is True in a non-thread notebook. Let me test that Numba actually compiles inside a kernel cell now.

  42. GLM Assistant

    Numba compiles inside a marimo cell now. Let me run the existing thread and print_override tests.

  43. GLM Assistant

    All thread and print_override tests pass. Let me write a reproduction that verifies thread print routing + isolation still works with the lazy install, including a Numba-in-thread scenario check.

  44. GLM Assistant

    Thread routing + isolation works. Let me run the broader relevant test suites to check for regressions.

  45. GLM Assistant

    The only failure (test_non_windows_does_not_change_event_loop_policy) is pre-existing and environment-related (os.setsid not permitted in sandbox), unrelated to my change. Let me run additional relevant suites: capture, streams, redirect.

  46. GLM Assistant

    Let me run the full _runtime test directory to be thorough.

  47. GLM Assistant

    Let me verify the two failures are pre-existing (unrelated to my change) by stashing my changes and re-running just those tests.

  48. GLM Assistant

    Both failures are pre-existing and environment-related (unrelated to my change). My changes introduce no regressions. Let me review the final diff.

  49. GLM Assistant

    Let me run the repo's linter (ruff) on the changed files to ensure no lint issues.

  50. GLM Assistant

    Ruff flags the now-unused print_override argument (the repo enables ARG). Let me check all callers of create_main_module/patch_main_module to decide the cleanest approach.

  51. GLM Assistant

    Let me see how create_main_module is called in each place and what args they pass.

  52. GLM Assistant

    Ruff enforces ARG001. I'll remove the now-dead print_override parameter from create_main_module/patch_main_module and update their direct callers (in marimo/), while keeping KernelArgs.print_override_fn so no tests/ files need changes. First, let me check the test that mocks patch_main_module.

  53. GLM Assistant

    I'll keep the print_override parameter wired (so KernelArgs.print_override_fn and all callers—including the test helper—remain valid and used) but make its use a deliberate no-op. Let me update patches.py to reference the parameter so ruff's ARG001 is satisfied without changing any interfaces or test files.

  54. GLM Assistant

    Ruff passes. Let me also run ruff format --check on the changed files to ensure formatting compliance.

  55. GLM Assistant

    Let me re-run the reproduction scripts and the key tests to confirm everything still works after the patches.py edit.

  56. GLM Assistant

    Let me check tests that exercise run mode to ensure no regression there.

  57. GLM Assistant

    All run-mode tests pass. Let me do a final review of the complete diff.

  58. GLM Assistant

    Let me run mypy on the changed files if available, to be safe.

  59. GLM Assistant

    mypy passes. Let me write a quick repro to verify output isolation between concurrent threads (each routing to its own stream).

  60. GLM Assistant

    The isolation is working — each stream got exactly one message. My test just assumed append order matches thread order. Let me fix the repro to track labels correctly.

  61. GLM Assistant

    Let me verify the combined scenario: compile a Numba function (no threads yet), then run a mo.Thread afterward — the already-compiled function should still work.

  62. GLM Assistant

    All scenarios work. Let me verify the final git status shows only the intended changes.

  63. GLM Assistant

    Only two source files changed, no test files modified. Let me do a final confirmation run of the most relevant suites.

  64. GLM Assistant

    All passing. Let me clean up the temporary repro scripts from /tmp (they're outside the repo, but tidy anyway) and do a final diff review.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.