Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.6-27B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION [SQL] "expand" projection is always named "value" ignoring "AS"…

  1. User

    ISSUE DESCRIPTION

    [SQL] "expand" projection is always named "value" ignoring "AS" ArcadeDB Server v26.5.1 (build b6d08fee549dd5930303b362223869901aab0fac/1778533954349/main)

    Running on Linux 6.17.0-29-generic - OpenJDK 64-Bit Server VM 25.0.3-ea

    Using expand in a projection, the result-set contains an property named value inspite an alias of the form AS x:

    SELECT expand([1,2,3,4]) AS test
    

    results in:

    {"result":[{"value":1},{"value":2},{"value":3},{"value":4}]}
    

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /arcadedb, current file: none) bash-$

  2. Qwen Assistant

    Let me start by understanding the issue. The problem is that when using expand in a SQL projection with an alias like AS test, the result always has the property named value instead of the specified alias.

    First, I need to explore the repository structure to understand how it's organized and find the relevant code that handles the expand function in SQL projections.

  3. Qwen Assistant

    Let me explore the repository structure more to understand the project layout, especially focusing on SQL-related code.

  4. Qwen Assistant

    The repository is an ArcadeDB project. Let me search for files related to SQL and the "expand" function. The engine directory is likely where the core SQL processing happens.

  5. Qwen Assistant

    I need to look for the SQL "expand" function specifically. Let me search for SQL function related files.

  6. Qwen Assistant

    I found several relevant files. Let me look at the ExpandStep.java first since it seems to be the main executor for the expand functionality.

  7. Qwen Assistant

    Now I can see the issue. In the fetchNext method, when the element is not a Result, Identifiable, or Map, it creates a new ResultInternal and sets the property name to "value" hardcoded:

    nextElement = new ResultInternal(context.getDatabase());
    ((ResultInternal) nextElement).setProperty("value", nextElementObj);
    

    This doesn't respect the alias specified in the SQL projection. Let me look at the SelectExecutionPlanner to understand how the expand step is set up and see how the alias information could be passed to the ExpandStep.

  8. Qwen Assistant

    This is a long file. Let me search for where the ExpandStep is created and how the expand functionality is triggered.

  9. Qwen Assistant

    Now let me look at the code around line 700 and 1614-1615 where the expand step is created:

  10. Qwen Assistant

    Now I see that when info.expand is true, an ExpandStep is created. But I need to understand where the alias information would be. Let me look at the Projection class and how the isExpand() and getExpandContent() methods work.

  11. Qwen Assistant

    Now let me look at the ProjectionItem class to understand how the isExpand and getExpandContent work, and importantly how the alias is handled:

  12. Qwen Assistant

    Now I understand the issue better. When info.expand is true, the ExpandStep is created, but the alias from the projection item is not passed to it. The getExpandContent() method in ProjectionItem doesn't preserve the alias.

    Let me look at the Expression class to see how isExpand() and getExpandContent() work there:

  13. Qwen Assistant

    Let me look at the FunctionCall class, which likely has the expand function implementation:

  14. Qwen Assistant

    I need to find where the getExpandContent method is implemented for FunctionCall. Let me look at the FunctionCall class more closely.

  15. Qwen Assistant

    Now let me look at the test files related to expand to understand the expected behavior:

  16. Qwen Assistant

    Now let me look at the existing test for expand parsing to understand the issue better:

  17. Qwen Assistant

    Now I understand the issue. When I look at the expandWithoutNestedProjection test, I see that the test only checks the property names x and y from the expanded object - it doesn't test the AS test alias. The issue is that the alias is ignored.

    Let me look at how the expand flow works more carefully. When info.expand is true:

    1. In optimizeQuery(), when info.projection.isExpand() is true, it sets info.expand = true and sets info.projection = info.projection.getExpandContent().
    2. The original projection item with the alias is replaced with the expand content
    3. Then ExpandStep is created, but it doesn't know about the alias

    The fix should be to pass the alias to the ExpandStep so that when creating the ResultInternal for scalar values, it uses the alias instead of hardcoded "value".

    Let me look at the QueryPlanningInfo class to understand what information is available:

  18. Qwen Assistant

    After my analysis, I understand the issue: when using expand() with an alias like SELECT expand([1,2,3,4]) AS test, the ExpandStep always uses hardcoded "value" as the property name instead of respecting the alias. The fix needs to:

    1. Store the expand alias in QueryPlanningInfo
    2. Pass the alias to ExpandStep constructor
    3. Use the alias when creating ResultInternal for scalar values in ExpandStep.fetchNext()

    Let me examine the relevant code more carefully to implement this fix. )

    <tool_call> <function=bash_terminal> <parameter=command> cat /arcadedb/engine/src/main/java/com/arcadedb/query/sql/executor/QueryPlanningInfo.java </tool_call>

  19. Qwen Assistant

    The previous command didn't work properly. Let me try again to view the QueryPlanningInfo file.

  20. Qwen Assistant

    Now I understand the structure. Let me first create a test script to reproduce the issue before making any changes.

  21. Qwen Assistant

    Let me look at how to run the existing tests and the TestHelper class to understand the test setup.

  22. Qwen Assistant

    Let me first create a simple test script to reproduce the issue. I'll check if Maven is available and run a simple test.

  23. Qwen Assistant

    Now let me create a test script to reproduce the issue:

  24. Qwen Assistant

    I need to create a test script to reproduce the issue. Let me compile and run this test file. First, I need to find the compiled classes or build the project.

  25. Qwen Assistant

    Let me try a different approach to compile and run the test. I'll use Maven to compile the engine module first, then run the test.

  26. Qwen Assistant

    Good, the compile succeeded. Now let me run a specific test to confirm the issue exists:

  27. Qwen Assistant

    Let me create a proper test to confirm the issue and run it:

  28. Qwen Assistant

    The user message is just whitespace. I was in the middle of testing the expand alias bug. I had created a test file to reproduce the issue. Let me continue by running the test to confirm the bug exists.

  29. Qwen Assistant

    Let me fix the compilation errors in the test file by using explicit type assertions:

  30. Qwen Assistant

    The user message is empty. Let me continue with my task. I need to run the test to confirm the bug exists, then fix it.

  31. Qwen Assistant

    The issue is that Set<String> implements Predicate interface, causing ambiguity. Let me cast it to avoid the ambiguity:

  32. Qwen Assistant

    The previous message was empty. Let me continue with running the test to confirm the bug exists.

  33. Qwen Assistant

    The issue is that Set<String> implements Predicate which causes ambiguity. Let me rewrite the test using a different assertion approach that other tests in this codebase use:

  34. Qwen Assistant

    Let me now run the test to confirm the bug exists:

  35. Qwen Assistant

    The issue is that the assertThat(boolean) call is ambiguous in newer Java versions. Let me use an intermediate variable:

  36. Qwen Assistant

    The user has sent an empty message. I was in the process of fixing the assertion error in my test file. I just rewrote the test file with intermediate boolean variables to avoid the ambiguous assertThat call. Now I should run the test to confirm the bug exists before implementing the fix.

  37. Qwen Assistant

    The issue is with the assertThat(result.hasNext()) call. Let me use Boolean.valueOf() to wrap the boolean:

  38. Qwen Assistant

    The user sent a very short message "s". This is likely an acknowledgment or they want me to continue. I was in the middle of testing my reproduction case for the expand alias bug. Let me continue by running the test.

  39. Qwen Assistant

    The Boolean type also implements Predicate which causes ambiguity. Let me check how other tests in this codebase handle boolean assertions:

  40. Qwen Assistant

    Interesting - the existing test uses assertThat(result.hasNext()).isTrue(); directly. Let me see if maybe there's a different version of assertj or something. Let me run the existing test to see if it works:

  41. Qwen Assistant

    Let me check the assertj version and try a different assertion approach:

  42. Qwen Assistant

    I see the issue - my test file is somehow causing a problem. The error says line 28 and 42 which corresponds to the assertThat(hasTestProperty) and assertThat(hasMyaliasProperty) lines. Let me use the same pattern as ExpandParseTest and just check properties directly:

  43. Qwen Assistant

    The test confirms the bug exists. Both tests fail because the property is named "value" instead of the expected alias ("test" or "myalias"). Now I need to implement the fix.

    Let me trace through the code to understand how to pass the alias to the ExpandStep:

  44. Qwen Assistant

    Now I see the flow. When the projection is expand, the alias is in the original projection item. I need to:

    1. Store the expand alias in QueryPlanningInfo
    2. Pass it to ExpandStep
    3. Use it when creating results for scalar values

    Let me first check how to get the alias from the projection:

  45. Qwen Assistant

    Let me examine how to get the expand alias from the projection item:

  46. Qwen Assistant

    Now I understand the structure. I need to:

    1. Add a field expandAlias in QueryPlanningInfo to store the alias
    2. Capture the alias in optimizeQuery when setting info.expand = true
    3. Pass the alias to ExpandStep constructor
    4. Use the alias in ExpandStep when creating ResultInternal for scalar values

    Let me implement these changes:

  47. Qwen Assistant

    I need to modify the QueryPlanningInfo class to add an expandAlias field that stores the alias for the expand projection. Let me edit this file.

  48. Qwen Assistant

    I need to modify the QueryPlanningInfo class to add an expandAlias field. Let me use sed instead of python.

  49. Qwen Assistant

    Now let me verify the changes to QueryPlanningInfo.java:

  50. Qwen Assistant

    Good, the QueryPlanningInfo class is updated. Now I need to modify the SelectExecutionPlanner to capture the expand alias when processing the projection.

  51. Qwen Assistant

    I need to capture the alias before replacing the projection. Let me update this section:

  52. Qwen Assistant

    Let me verify the change was applied correctly:

  53. Qwen Assistant

    Now I need to update the ExpandStep to accept and use the alias, and update where it's created in SelectExecutionPlanner.

  54. Qwen Assistant

    I need to update the handleExpand method to pass the alias to ExpandStep.

  55. Qwen Assistant

    Now I need to update the ExpandStep class to accept and use the alias. Let me view the current ExpandStep.java and update it:

  56. Qwen Assistant

    Now I need to modify the ExpandStep to:

    1. Add a field to store the expand alias
    2. Update the constructor to accept the alias
    3. Use the alias instead of hardcoded "value" when setting properties
  57. Qwen Assistant

    let me apply the changes directly using sed commands.

  58. Qwen Assistant

    I see the issue - I need to add the expandAlias assignment after super(context). Let me use sed to add the line after line 44.

  59. Qwen Assistant

    Now I need to update the line that sets the "value" property to use the alias. Let me find and replace it:

  60. Qwen Assistant

    I need to replace the hardcoded "value" with the expandAlias (with fallback to "value" if alias is null). Let me edit line 104-106 to replace the single line with two lines.

  61. Qwen Assistant

    after replace command

  62. Qwen Assistant

    I see the sed command placed the new code in the wrong location - it's inside the Map handling block instead of in the else block. Let me fix this properly.

  63. Qwen Assistant

    Let me rewrite the file properly with the correct changes:

  64. Qwen Assistant

    Let me verify the changes I made to ExpandStep.java look correct.

  65. Qwen Assistant

    Good, the ExpandStep.java looks correct now. Let me verify the SelectExecutionPlanner.java changes are still in place:

  66. Qwen Assistant

    Excellent! All the changes are in place. Now let me run the test to verify the fix works:

  67. Qwen Assistant

    The fix works. Both tests pass now. Let me run the existing expand-related tests to make sure I didn't break anything:

  68. Qwen Assistant

    The ExpandStepTest passes (10 tests). Let me also run the ExpandParseTest to make sure those tests pass too.

  69. Qwen Assistant

    All tests pass. Let me also run the UnwindExpandStepTest to make sure it still works:

  70. Qwen Assistant

    Let me run a broader set of SQL-related tests to ensure my changes don't break anything else:

  71. Qwen Assistant

    Excellent! 157 tests passed. Let me run a few more related tests to ensure everything works:

  72. Qwen Assistant

    All tests pass. Now let me clean up by removing the test file I created (since I shouldn't add new tests to the repository):

  73. Qwen Assistant

    Let me verify my changes one more time before submitting:

  74. Qwen Assistant

    The changes look good. Let me run the existing expand-related tests one more time to confirm everything works:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.