Skip to content
TheChatArchiveThe Chat Archive
xiaomi/mimo-v2.5-pro· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION [SQL] "expand" projection is always named "value" ignoring "AS"…

  1. User

    ISSUE DESCRIPTION

    [SQL] "expand" projection is always named "value" ignoring "AS" ArcadeDB Server v26.5.1 (build b6d08fee549dd5930303b362223869901aab0fac/1778533954349/main)

    Running on Linux 6.17.0-29-generic - OpenJDK 64-Bit Server VM 25.0.3-ea

    Using expand in a projection, the result-set contains an property named value inspite an alias of the form AS x:

    SELECT expand([1,2,3,4]) AS test
    

    results in:

    {"result":[{"value":1},{"value":2},{"value":3},{"value":4}]}
    

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /arcadedb, current file: none) bash-$

  2. Assistant

    I'll start by exploring the repository to understand the structure and locate the relevant code for the SQL "expand" projection. Let's first see what's in the repository.

  3. Assistant

    Let me find files related to SQL expand and projection.

  4. Assistant

    Let me look for SQL-related files that handle expand projection.

  5. Assistant

    Let me look at the ExpandStep.java and ProjectionItem.java files.

  6. Assistant

    Let me understand the issue. When using SELECT expand([1,2,3,4]) AS test, the result contains {"value":1} instead of {"test":1}. Let me trace through the code to understand how the projection alias is (or isn't) being used.

    The ExpandStep class processes the expand operation. In the fetchNext method, when the element is not a Result, Identifiable, or Map, it creates a ResultInternal with the property name "value". This is the issue - it should use the alias from the projection.

    Let me look at how the expand is parsed and how the alias gets propagated.

  7. Assistant

    Now let me trace how the expand projection is executed. Let me look at how projections are processed and where the alias gets lost.

  8. Assistant

    Let me look at how expand is handled in the execution planner and the projection step.

  9. Assistant

    Let me look at how the ExpandStep handles the property name. In fetchNext, I can see it sets "value" as the property name when creating a ResultInternal for non-Result, non-Identifiable, and non-Map values. Let me look at the Projection class to understand how expand projections are processed and what gets passed to ExpandStep.

  10. Assistant

    Now I understand the flow. Let me look at how the execution planner handles expand projections:

  11. Assistant

    Let me understand the flow:

    1. SELECT expand([1,2,3,4]) AS test is parsed. The projection is expand([1,2,3,4]) AS test.
    2. In ProjectionItem.getExpandContent(), it creates a new ProjectionItem with expression.getExpandContent() but it doesn't copy the alias. So the alias test is lost.
    3. The ExpandStep gets a result from the projection step, which has a single property (the name of which depends on the expression).
    4. In ExpandStep.fetchNext, when expanding a non-Result, non-Identifiable, non-Map value, it creates a ResultInternal and sets setProperty("value", nextElementObj).

    So the issue is two-fold:

    1. The alias AS test is not being propagated properly.
    2. Even if it were, the ExpandStep hardcodes "value" as the property name.

    Let me look at how the expand content flows through the execution plan more carefully.

    Let me check what happens in the ExpandStep's fetchNext. It receives a result from the previous step, extracts the single property from it, then creates new results. The property name of the expanded result should be based on the alias.

    Wait, actually let me re-read the ExpandStep more carefully. When expanding:

    1. The previous step produces results with a single property (e.g., expand([1,2,3,4]) would evaluate [1,2,3,4] and the result would have a property with the name of the expression).
    2. fetchNext gets the propName from the result and extracts the projValue.
    3. If projValue is an Iterable, it creates an iterator.
    4. For each element in the iterator, if it's a primitive value (like an integer), it creates a ResultInternal and sets setProperty("value", nextElementObj).

    So the issue is that when expanding a collection of primitive values, the ExpandStep always names the property "value", ignoring the alias from the original projection.

    Now, to fix this, we need to pass the alias information to the ExpandStep so it can use it instead of "value".

    Let me look at where ExpandStep is created to see how it's instantiated:

  12. Assistant

    Let me look more carefully at the flow. The issue is that when expand is used with AS alias, the alias is lost. Let me trace the execution path:

  13. Assistant

    Let me understand the flow:

    1. The query SELECT expand([1,2,3,4]) AS test is parsed into a Projection with a single ProjectionItem where:
    • expression is something like expand([1,2,3,4])
      • alias is test
    1. In optimizeQuery, when info.projection.isExpand() is true:

      • info.expand = true
      • info.projection = info.projection.getExpandContent() which strips the expand() wrapper3. getExpandContent() in Projection calls getExpandContent() on the first item, which creates a new ProjectionItem with the expression content but does NOT copy the alias!
    2. Then in handleExpand, an ExpandStep is chained.

    The issue is in ProjectionItem.getExpandContent() - it doesn't preserve the alias. Let me verify:

    public ProjectionItem getExpandContent() {
        final ProjectionItem result = new ProjectionItem(-1);
        result.setExpression(expression.getExpandContent());
        // Ad-hoc support for issue #2965: preserve nested projection when expanding
        result.nestedProjection = this.nestedProjection;
        return result;
    }
    

    The alias is not being set here. So when we have expand([1,2,3,4]) AS test:

    • The projection item has alias = test
    • getExpandContent() creates a new item with expression = [1,2,3,4] but alias = null

    Then when the ExpandStep processes the results, it uses "value" as the property name in fetchNext.

    Now let me also look at how the projection step works. The projection would calculate [1,2,3,4] and create a result with the property name. Since the alias is null, it would use the expression string as the property name.

    Actually, wait. Let me re-read the flow more carefully. Let me look at handleProjections and how it interacts with handleExpand.

  14. Assistant

    Now let me understand the flow. When expand is used:

    1. optimizeQuery sets info.expand = true and replaces info.projection with info.projection.getExpandContent() - this strips the expand() wrapper but does NOT copy the alias.
    2. handleProjections is called with the modified projection (without alias)
    3. handleExpand is called which chains an ExpandStep

    So the alias is lost at step 1. The getExpandContent() method doesn't copy the alias.

    But wait, I need to understand what ExpandStep actually does. Looking at ExpandStep.fetchNext:

    • It gets a Result with one property (the name doesn't matter much)
    • It extracts the value of that property
    • If the value is an Iterable or Iterator, it iterates over it
    • For each primitive element, it creates a ResultInternal with setProperty("value", nextElementObj)

    The "value" is hardcoded. This is the issue - when there's an alias, the property name should be the alias.

    But there's a nuance. The expand is supposed to "expand" a collection into individual results. When expanding [1,2,3,4], each element becomes a separate result. The question is: what should the property name be?

    Looking at the behavior without alias: SELECT expand([1,2,3,4]) - this should also have "value" as property name since there's no alias. But the issue is specifically about when an alias IS provided.

    Now, looking at getExpandContent() in ProjectionItem:

    public ProjectionItem getExpandContent() {
        final ProjectionItem result = new ProjectionItem(-1);
        result.setExpression(expression.getExpandContent());
        // Ad-hoc support for issue #2965: preserve nested projection when expanding
        result.nestedProjection = this.nestedProjection;
        return result;
    }
    

    It doesn't copy the alias. So even if ExpandStep used the alias, it wouldn't be available.

    Let me trace through how the projection works:

    1. handleProjections creates a ProjectionCalculationStep with info.projection
    2. The projection step evaluates the expression and assigns results to property names based on getProjectionAliasAsString()
    3. Since alias is null after getExpandContent(), the property name will be the expression toString()

    Then ExpandStep extracts the value from that single property and expands the collection. For primitive values, it creates new ResultInternal with "value" as the property name.

    So there are two approaches:

    1. Pass the alias to ExpandStep somehow
    2. In ExpandStep, use the property name from the source result as the property name for expanded elements (instead of hardcoded "value")

    Actually, looking more carefully, ExpandStep already extracts propName from the source result:

    final String propName = nextAggregateItem.getPropertyNames().iterator().next();
    

    But it doesn't use this propName when creating expanded results. Instead, for primitive values, it hardcodes "value".

    The cleanest fix would be to:

    1. In ExpandStep, use the property name from the source result (or allow an alias to be set)
    2. OR in ProjectionItem.getExpandContent(), copy the alias to the result

    Actually wait, let me re-think. The expand step gets results from the projection step. If SELECT expand([1,2,3,4]) AS test:

    After getExpandContent() loses the alias:

    • The projection becomes SELECT [1,2,3,4] with the expression toString as property name
    • ExpandStep receives a result like {"[1, 2, 3, 4]": [1,2,3,4]} and expands itAfter the fix in getExpandContent() to preserve the alias:
    • The projection becomes SELECT [1,2,3,4] AS test
    • ExpandStep receives a result like {"test": [1,2,3,4]} and expands it
    • But ExpandStep still creates ResultInternal with "value" as property name

    So we need BOTH fixes:

    1. Preserve the alias in getExpandContent()
    2. In ExpandStep, use the property name from the source result instead of hardcoded "value"

    Let me look at ExpandStep more carefully to understand how it creates expanded results.

    In fetchNext:

    final String propName = nextAggregateItem.getPropertyNames().iterator().next();
    final Object projValue = nextAggregateItem.getProperty(propName);
    

    Then for each expanded element:

    } else {
        nextElement = new ResultInternal(context.getDatabase());
        ((ResultInternal) nextElement).setProperty("value", nextElementObj);
    }
    

    So for primitive values, it hardcodes "value". For other types (Result, Identifiable, Map), it preserves the structure.

    The fix should be to use the alias (or the property name from the source result) instead of "value".

    Let me think about this more carefully. The ExpandStep doesn't have access to the alias. We need to either:

    1. Store the alias in ExpandStep
    2. Or derive it from the source result's property name

    Option 2 seems cleaner because the source result's property name already reflects the alias (if the projection correctly uses it).

    So the plan is:

    1. In ProjectionItem.getExpandContent(), copy the alias to the result
    2. In ExpandStep.fetchNext(), use propName instead of hardcoded "value" when creating expanded results for primitive values

    Let me verify this is correct by checking what happens in the non-aliased case (SELECT expand([1,2,3,4])):

    • After getExpandContent() (without fix): expression is [1,2,3,4], alias is null
    • Projection creates result with property name [1,2,3,4] (expression toString)
    • ExpandStep uses this as propName and would use it for expanded results

    Hmm, that would change the default behavior from "value" to "[1,2,3,4]" for the non-aliased case. That's not good.

    Actually wait, let me re-read the code more carefully. The getProjectionAliasAsString() returns:

    public String getProjectionAliasAsString() {
        return getProjectionAlias().getStringValue();
    }
    
    public Identifier getProjectionAlias() {
        if (alias != null) {
            return alias;
        }
        final Identifier result;
        if (all) {
            result = new Identifier("*");
        } else {
            result = new Identifier(expression.toString());
        }
        return result;
    }
    

    So when there's no alias, the property name is expression.toString(). For expand([1,2,3,4]), after getExpandContent, expression would be something like [1,2,3,4], and the property name would be [1,2,3,4].

    Then ExpandStep gets the propName [1,2,3,4] from the source result. If we use this as the property name for expanded results, we'd get:

    [{"[1,2,3,4]": 1}, {"[1,2,3,4]": 2}, ...]
    

    That's worse than the current "value" behavior. So we need a different approach.

    Better approach: in ExpandStep, use the source property name, BUT only for the case when it's not an expression-like name. Or better yet, store the alias in ExpandStep and use it.

    Actually, the simplest and most correct approach:

    1. Add an alias field to ExpandStep
    2. Pass the alias when creating the ExpandStep
    3. In ExpandStep.fetchNext, use the alias if set, otherwise fall back to "value"

    Let me check how ExpandStep is created and how the alias can be passed.

    Looking at handleExpand:

    private static void handleExpand(final SelectExecutionPlan result, final QueryPlanningInfo info, final CommandContext context) {
        if (info.expand) {
          result.chain(new ExpandStep(context));
        }
    }
    

    And in QueryPlanningInfo, we need to store the alias. Let me check if QueryPlanningInfo has relevant fields.

    Actually, let me think about this differently. Looking at the execution flow:

    1. handleProjections creates a ProjectionCalculationStep with the projection
    2. handleExpand creates an ExpandStep

    The ExpandStep operates on the results of the ProjectionCalculationStep. If we fix getExpandContent() to preserve the alias, the ProjectionCalculationStep would produce results like {"test": [1,2,3,4]}. Then ExpandStep would see propName = "test" and should use "test" as the property name for expanded primitive values.

    But for the no-alias case, propName would be the expression string like [1,2,3,4], which we don't want to use as the property name.

    Wait, actually for the no-alias case, getExpandContent() returns a ProjectionItem without alias, so the property name would be expression.toString(). But in the current behavior, the property name for expanded elements is "value" regardless. So the current behavior for no-alias is already correct (property name is "value").

    Hmm, but how does the current code produce "value" for the no-alias case? Let me trace through again...

    After getExpandContent(), the expression is [1,2,3,4]. In handleProjections, a ProjectionCalculationStep is created. This step evaluates the expression and creates a result with property("[1,2,3,4]", [1,2,3,4]).

    Then ExpandStep receives this result. It extracts propName = "[1,2,3,4]" and projValue = [1,2,3,4]. It iterates over the array, and for each primitive value, creates ResultInternal with setProperty("value", ...). So the original propName is ignored and "value" is used.

    So the question is: when should we use the alias and when should we use "value"?

    I think the correct behavior is:

    • If there's an AS alias, use the alias as the property name
    • If there's no AS alias, use "value" as the property name

    So we need to pass the alias to ExpandStep. Let me look at how to do this.

    The cleanest way:

    1. Store the alias from the original ProjectionItem before calling getExpandContent()
    2. Pass it to ExpandStep when creating it
    3. In ExpandStep, use it as the property name for expanded primitive values

    Let me check QueryPlanningInfo to see if there's a place to store this.

  15. Assistant

    Let me look at the QueryPlanningInfo class to understand how the expand alias could be stored:

  16. Assistant

    Let me see the full QueryPlanningInfo class:

  17. Assistant

    Let me trace through how the expand works in the query execution. Let me look at how getExpandContent works on expressions:

  18. Assistant

    Let me look at the MathExpression to understand how expand works:

  19. Assistant

    Let me look at the getExpandContent method in MathExpression to understand what it returns.

  20. Assistant

    Let me look at BaseExpression to understand how expand is parsed:

  21. Assistant

    Now let me understand the full picture. The key issue is in ProjectionItem.getExpandContent() - it doesn't copy the alias. Let me also look at how the alias gets used in the ExpandStep. Let me first check the existing test to understand expected behavior:

  22. Assistant

    Now I understand the full picture. Let me trace through the code:

    1. SELECT expand([1,2,3,4]) AS test is parsed into a ProjectionItem with expression=expand([1,2,3,4]) and alias=test.

    2. In optimizeQuery(), info.projection.isExpand() is true, so:

      • info.expand = true
      • info.projection = info.projection.getExpandContent() — this calls getExpandContent() which creates a NEW ProjectionItem WITHOUT copying the alias!
    3. Later, handleProjections() calculates the projection, and then handleExpand() adds an ExpandStep.

    4. In ExpandStep.fetchNext(), when expanding primitive values, it always creates a ResultInternal with setProperty("value", nextElementObj).

    The issue is:

    1. The alias is lost in getExpandContent()
    2. ExpandStep always uses "value" as the property name

    I need to:

    1. Preserve the alias and pass it to ExpandStep
    2. Use the alias in ExpandStep.fetchNext() when creating expanded primitive values

    Let me first write a reproduction script to confirm the issue:

  23. Assistant

    Now let me write a test script to reproduce the issue first:

  24. Assistant

    Now I understand the full problem. Let me trace through the execution path:

    1. SELECT expand([1,2,3,4]) AS test is parsed, creating a ProjectionItem with expression=expand([1,2,3,4]) and alias=test.
    2. In optimizeQuery(), info.projection.isExpand() returns true, so info.expand = true and info.projection = info.projection.getExpandContent().
    3. ProjectionItem.getExpandContent() creates a new ProjectionItem WITHOUT copying the alias!
    4. Later handleExpand() creates ExpandStep without any alias information.
    5. In ExpandStep.fetchNext(), when expanding primitive values, it always uses "value" as the property name.

    The fix needs two parts:

    1. Pass the expand alias to ExpandStep
    2. Use the alias instead of "value" when creating expanded primitive results

    Let me first write a test to confirm the issue, then implement the fix:

  25. Assistant

    Let me look at the ExpandParseTest:

  26. Assistant

    Now I understand the issue clearly. Let me trace through the code:

    1. When SELECT expand([1,2,3,4]) AS test is parsed, the ProjectionItem has expression=expand([1,2,3,4]) and alias=test.
    2. In optimizeQuery(), info.projection.isExpand() returns true, so:
      • info.expand = true
      • info.projection = info.projection.getExpandContent() — this strips the expand but the alias is lost in ProjectionItem.getExpandContent()!
    3. handleExpand() creates ExpandStep without any alias info.
    4. In ExpandStep.fetchNext(), when expanding primitive values, it always uses "value" as the property name.

    The fix needs to:

    1. Pass the alias to ExpandStep
    2. Use that alias instead of the hardcoded "value" when creating expanded results for primitives

    Let me implement this. First, add the alias field to ExpandStep:

  27. Assistant

    Let me use the open command correctly.

  28. Assistant

    Now I need to understand the full flow. Let me look at the optimizeQuery method more carefully and think about the fix:

  29. Assistant

    Now I understand the full picture. The issue is:

    1. When expand() is used with AS alias, the alias information is lost because:
      • ProjectionItem.getExpandContent() does not copy the alias
      • ExpandStep hardcodes "value" as the property name for primitive values

    The fix needs to:

    1. Preserve the alias through the expand content extraction
    2. Pass the alias to ExpandStep so it uses the correct property name

    Let me look at how the expand content flows through:

    1. In optimizeQuery(), info.projection.getExpandContent() is called which strips the expand wrapper but loses the alias
    2. Then handleProjections() creates a ProjectionCalculationStep with the expand content
    3. Then handleExpand() creates an ExpandStep

    The fix approach:

    1. Store the expand alias in QueryPlanningInfo when extracting expand content
    2. Pass it to ExpandStep when creating it
    3. In ExpandStep, use the alias when creating primitive value results

    Let me implement this step by step.

  30. Assistant

    Now I have a clear understanding of the issue. Let me implement the fix:

    1. Add an expandAlias field to QueryPlanningInfo to preserve the alias
    2. Save the alias in optimizeQuery() before stripping expand
    3. Add an alias parameter to ExpandStep constructor
    4. Use the alias in ExpandStep.fetchNext() for primitive values
    5. Pass the alias in handleExpand()

    Let me start with the changes:

  31. Assistant

    Let me open the file first and then edit it:

  32. Assistant

    Now I understand the issue. Let me look at what approach is cleanest. The issue is:

    1. SELECT expand([1,2,3,4]) AS test - the alias test is lost when getExpandContent() strips the expand
    2. ExpandStep always uses "value" for primitive values

    The cleanest fix is to pass the alias to ExpandStep and use it for the property name. Let me implement:

    1. Add expandAlias field to QueryPlanningInfo
    2. Store alias in optimizeQuery() when stripping expand
    3. Pass alias to ExpandStep in handleExpand()
    4. Use alias in ExpandStep.fetchNext() for primitive values
  33. Assistant

    Let me try a different approach to editing. Maybe I need to use a different syntax.

  34. Assistant

    Let me use sed to make the modifications:

  35. Assistant

    Now I need to also update the copy() method to include expandAlias. Let me first check the current state of the file:

  36. Assistant

    Wait, let me reconsider the approach. Instead of passing through QueryPlanningInfo, a simpler approach would be to:

    1. Copy the alias in ProjectionItem.getExpandContent() so the alias is preserved
    2. Then in ExpandStep.fetchNext(), use the property name from the source result as the key for primitive values instead of hardcoded "value"

    Let me revert the QueryPlanningInfo change and take this simpler approach:

  37. Assistant

    Let me think about this more carefully. The simplest and most direct fix is:

    1. Store the expand alias in ExpandStep directly
    2. Pass it through from the planner

    Let me implement this approach properly:

  38. Assistant

    Let me implement the fix step by step. First, I'll add the expandAlias field to QueryPlanningInfo:

  39. Assistant

    Now I need to update the copy() method to include expandAlias:

  40. Assistant

    I need to add result.expandAlias = this.expandAlias; after line 88.

  41. Assistant

    Now let me update the optimizeQuery method to store the alias before getting expand content:

  42. Assistant

    I need to store the alias before getting expand content. Let me modify the optimizeQuery method:

  43. Assistant

    Let me verify the change:

  44. Assistant

    I see there's a duplicate closing brace. Let me fix it:

  45. Assistant

    I see there's a duplicate closing brace on line 706. Let me fix it:

  46. Assistant

    Let me verify the fix:

  47. Assistant

    Now let me update the handleExpand method to pass the alias to ExpandStep:

  48. Assistant

    Let me modify the handleExpand method to pass the alias:

  49. Assistant

    Let me verify:

  50. Assistant

    There's an extra closing brace. Let me fix that:

  51. Assistant

    Let me verify:

  52. Assistant

    Now I need to update ExpandStep to accept and use the alias. Let me update the constructor and the fetchNext method:

  53. Assistant

    Now I need to add an alias field to ExpandStep and modify the constructor to accept it. Then I need to use it in fetchNext when creating ResultInternal for primitive values.

    Let me also check the existing constructor to make sure I keep backward compatibility.

  54. Assistant

    Good, there's only one call to new ExpandStep. Let me now modify the ExpandStep class:

  55. Assistant

    Now I need to update the line that sets the property name "value" to use the alias if available:

  56. Assistant

    I need to change line 106 to use the alias if available. Let me see the context:

  57. Assistant

    I need to change line 106 to use expandAlias if it's set, otherwise fall back to "value".

  58. Assistant

    Let me verify the changes:

  59. Assistant

    Let me verify the entire ExpandStep file looks correct:

  60. Assistant

    Let me verify the QueryPlanningInfo.copy() method includes expandAlias:

  61. Assistant

    Now let me try to compile the code to make sure it compiles correctly:

  62. Assistant

    Now let me run the existing expand tests to make sure I haven't broken anything:

  63. Assistant

    I need to check the current directory and adjust the path.

  64. Assistant

    OK, the current directory is /arcadedb/engine. Let me run the tests from there.

  65. Assistant

    Tests passed. Let me also run the ExpandParseTest:

  66. Assistant

    Good, all tests pass. Now let me write a quick test to verify the fix works for the specific issue. Let me also run the UnwindExpandStepTest:

  67. Assistant

    Good, all tests pass. Now let me write a quick test to verify the fix works for the specific issue. Let me create a simple test script:

  68. Assistant

    Let me instead write a proper test within the existing test infrastructure. I'll create a temporary test file:

  69. Assistant

    I need to fix the path since we're already in the engine directory:

  70. Assistant

    Now let me run the test:

  71. Assistant

    I need to fix the test - result.hasNext() returns a boolean, not a predicate. Let me fix the ambiguous assertion:

  72. Assistant

    Both tests pass. Now let me remove the test file since the instructions say not to modify or add tests. Let me also run a broader set of related tests to make sure nothing is broken.

  73. Assistant

    Let me also run a broader set of related tests to make sure nothing is broken:

  74. Assistant

    Let me also run the ProjectionTest:

  75. Assistant

    Let me also run the SQLFunctionsTest:

  76. Assistant

    Let me also check if there are any other places where ExpandStep is referenced to make sure I haven't missed any usages:

  77. Assistant

    We're in the engine directory.

  78. Assistant

    Good. ExpandStep is only used in SelectExecutionPlanner and the tests. The changes are minimal and correct.

    Let me also look at the SQLExecutorAdditionalCoverageTest to make sure my changes don't break anything:

  79. Assistant

    All tests pass. Let me now run a broader set of tests to make sure nothing is broken. Let me run all the SQL executor tests:

  80. Assistant

    Let me try with a different pattern.

  81. Assistant

    The one failure is ScriptExecutionTest.commitRetryMultiThreadsSQLIncrementRepeatableRead:278 which is unrelated to my changes - it's about bucket limits. Let me verify this test was already failing before my changes:

  82. Assistant

    Good, the failure is pre-existing - not caused by my changes. Let me restore my changes:

  83. Assistant

    Now let me review all the changes I've made to make sure they are correct:

  84. Assistant

    The changes look clean and correct. Let me now do a final verification:

  85. Assistant

    All tests pass. Let me now submit my changes. Let me first do a final review of the diff:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.