Skip to content
TheChatArchiveThe Chat Archive
MiniMaxminimax/minimax-m3· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Extract function extracts too much When triggering Extract function…

  1. User

    ISSUE DESCRIPTION

    Extract function extracts too much When triggering Extract function with the selection:

    /// prepare an empty gleam project in the `target_path`
    ///
    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
    
      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <-------------------------------------------------------------- selected from here
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    
      use gleam_toml <- result.try(
        toml_path
        |> simplifile.read
        |> result.replace_error(FailedToReadGleamToml),
      )
    
      let gleam_toml =
        gleam_toml
        |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
      // <---------------------------------------------------------------- to here
    }
    

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      function(target, user_id)
    }
    

    instead of the expected:

    /// prepare an empty gleam project in the `target_path`
    ///
    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    
    fn function(
      target: TargetPath,
      user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    
      use gleam_toml <- result.try(
        toml_path
        |> simplifile.read
        |> result.replace_error(FailedToReadGleamToml),
      )
    
      let gleam_toml =
        gleam_toml
        |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
    }
    

    Using gleam 1.16.0 in neovim nightly

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /gleam, current file: none) bash-$

  2. MiniMax Assistant

    Let me start by exploring the repository structure to understand what we're working with.

  3. MiniMax Assistant

    Now let me understand the existing tests for ExtractFunction so I can understand the testing pattern:

  4. MiniMax Assistant

    Now let me look at how the issue works in the example. Let me find the specific function and understand the bug better:

  5. MiniMax Assistant

    Now I understand the structure. Let me write a simple reproduction script to understand the issue better:

  6. MiniMax Assistant

    Now let me run the tests to see the existing snapshots to understand how things work:

  7. MiniMax Assistant

    Let me write a test to reproduce the bug. First, let me look at the visit_typed_statement more carefully:

  8. MiniMax Assistant

    Let me write a test to reproduce this. First let me check the function structure of the bug:

  9. MiniMax Assistant

    Now let me build the project first to ensure I can run the tests:

  10. MiniMax Assistant

    Good, it builds. Now let me run a specific extract_function test to understand the behavior:

  11. MiniMax Assistant

    All tests pass. Now I need to understand the bug more deeply. Let me re-read the issue:

    The user's source code is:

    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(...)
    
      // copy the base project to the target_path
      use _ <- result.try(...)
    
      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <----- selected from here
      let toml_path = ...
      use gleam_toml <- result.try(...)
      let gleam_toml = ...
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
      // <----- to here
    }
    

    The expected behavior is to extract just the inner statements (from let toml_path to the final simplifile.write(...)).

    But the current behavior extracts the entire function body, replacing it with function(target, user_id).

    The selection is from the start of let toml_path to the end of simplifile.write(...) which is the LAST statement in the function. So the bug must be related to how the function extracts when the last statement is in tail position.

    Let me re-look at the visit_typed_function:

  12. MiniMax Assistant

    Now let me check the can_extract_statement function and the logic in visit_typed_statement:

  13. MiniMax Assistant

    Now I think I understand the issue. Looking at can_extract_statement:

    For ast::Statement::Assignment (which is the let toml_path = ... statement), it returns true if:

    • selected range does NOT completely contain the value
    • AND selected range does NOT completely contain the statement

    For the example code, the user is selecting from let toml_path = ... (which is the first statement they want to extract) to the end of the last statement.

    Let me trace through what happens:

    1. The function body has these statements:
      • use priv <- result.try(...)
      • use _ <- result.try(...)
      • let toml_path = ...
      • use gleam_toml <- result.try(...)
      • let gleam_toml = ...
      • simplifile.write(toml_path, gleam_toml) |> result.replace_error(FailedToWriteGleamToml)

    The user selects from the start of let toml_path = ... to the end of simplifile.write(...) (the last statement).

    Now, visit_typed_function is called first, which sets last_statement_location to the location of the last statement (the simplifile.write(...) statement).

    Then for each statement, visit_typed_statement is called. The logic for each is:

    • can_extract_statement returns true if selected_range overlaps with the statement range AND not completely within
    • If yes, then either set self.function or merge spans

    Now let me think about this. When the last statement is reached:

    • self.function is already Some(...) from the previous statements
    • It's a Some(ExtractedFunction { value: ExtractedValue::Statements { location, position }, .. })
    • So it goes to the merge logic:
    Some(ExtractedFunction {
        value:
            ExtractedValue::Statements {
                location,
                position: extracted_position,
            },
        ..
    }) => {
        *location = location.merge(&statement_location);
        *extracted_position = position;
    }
    

    This merges the location of the last statement into the extracted location, and updates the position to the current statement's position. If the last statement is in tail position, then position is Tail { type_: ... }. This would change the position from NotTail to Tail. Then in code_actions, it would call extract_code_in_tail_position.

    Let me look at this:

  14. MiniMax Assistant

    Hmm, the issue may be that when we extract statements but they're in tail position (the last statement of a function/block), we end up calling extract_code_in_tail_position which only extracts one expression, not multiple statements.

    Let me look at this more carefully:

    In code_actions:

    ExtractedValue::Statements {
        location,
        position: StatementPosition::NotTail,
    } => self.extract_statements(...),
    
    ExtractedValue::Statements {
        location,
        position: StatementPosition::Tail { type_ },
    } => self.extract_code_in_tail_position(...)
    

    So when we extract statements, if they include the tail, then we go to extract_code_in_tail_position which extracts only one expression. But this is wrong! When we extract multiple statements where the last is in tail position, we should still extract all the statements.

    Let me think about this more carefully. The issue says:

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    instead of the expected:

    fn prepare_project_structure(...) {
      // get the priv dir
      use priv <- result.try(...)
      // copy the base project to the target_path
      use _ <- result.try(...)
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    
    fn function(...) {
      let toml_path = ...
      ...
    }
    

    So when multiple statements are selected and the last one is in tail position, the current code treats it as if only the tail was selected, and extracts the entire function content (from the function start to the tail).

    Wait, looking again at the code in visit_typed_expr:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        // If we have already determined what code we want to extract, we don't
        // want to extract this instead. This expression would be inside the
        // piece of code we already are going to extract, leading to us
        // extracting just a single literal in any selection, which is of course
        // not desired.
        if self.function.is_none() {
            // If this expression is fully selected, we mark it as being extracted.
            if self.can_extract_expression(expression) {
                self.function = Some(ExtractedFunction::new(ExtractedValue::Expression(
                    expression,
                )));
            }
        }
        ...
    

    Hmm, but the user is selecting statements that include the tail expression of the function. The tail expression is the simplifile.write(...) which is not assigned to anything. Let me check this with the existing tests:

    Looking at extract_function_partially_selected:

    • It selects from "a =" to "c =", which is partial - it does NOT include the tail expression echo c (which is the last statement). So it works correctly.

    The bug case is when the selection INCLUDES the tail expression. Let's trace through:

    The user selects:

    • From: start of let toml_path = ... (which is let position)
    • To: end of simplifile.write(toml_path, gleam_toml) |> result.replace_error(FailedToWriteGleamToml) (which is the end position)

    Now let's trace:

    1. visit_typed_function sets last_statement_location to the location of simplifile.write(...).
    2. visit_typed_function calls visit_typed_expr_block with the function body statements.
    3. visit_typed_expr_block sets last_statement_location to the location of the last statement in the block.
    4. Then visit_typed_statement is called for each statement in the block.

    For the first statement use priv <- result.try(...):

    • can_extract_statement is called. The selected range is from let toml_path to the end of simplifile.write(...). The statement's range is use priv <- result.try(...).
    • overlaps returns false (since the statement is before the selection). So returns false. Good.

    For the second statement use _ <- result.try(...):

    • Similar, overlaps returns false.

    For the third statement let toml_path = ...:

    • can_extract_statement is called. The selected range overlaps with this statement.
    • For Assignment, it checks !within(selected_range, value_range) && !completely_within(selected_range, statement_range).
    • The statement range is let toml_path = .... The selected range starts at the let and goes to the end. The value is the right side of =.
    • within(selected_range, value_range): starts of selected range is at the start of let which is before value range starts at target.path. Hmm.

    Let me actually run a reproduction script to see what's happening:

  15. MiniMax Assistant

    Now let me create a test for the bug. First, let me check what existing tests cover to understand:

  16. MiniMax Assistant

    So when extracting statements including the tail, it produces a function with all the statements, which is correct.

    Now the issue scenario is different. Let me re-examine. The user's code:

    fn prepare_project_structure(...) {
      // get the priv dir
      use priv <- result.try(...)
    
      // copy the base project to the target_path
      use _ <- result.try(...)
    
      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <----- selected from here
      let toml_path = ...
      use gleam_toml <- result.try(...)
      let gleam_toml = ...
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
      // <----- to here
    }
    

    The user is selecting:

    • The third statement let toml_path = ...
    • The fourth statement use gleam_toml <- result.try(...)
    • The fifth statement let gleam_toml = ...
    • The sixth statement simplifile.write(...) |> result.replace_error(...)

    This is 4 statements, with the last being in tail position. Let me check what existing test extract_statements_in_tail_position does. It selects:

    • let c = 3 (3rd statement)
    • let d = 4 (4th statement)
    • a * b + c * d (5th statement, tail)

    That's 3 statements, with the last being tail.

    Now let me write a quick test that matches the issue scenario:

  17. MiniMax Assistant

    Let me look more carefully at the bug. The key insight is the example issue is using result.try and |> result.replace_error(...) chains. Let me look at the issue more carefully:

    The user's code:

    // copy the base project to the target_path
    use _ <- result.try(
      simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
      |> result.replace_error(FailedToCopyBaseProject),
    )
    
    // replace $PROJECT_NAME placeholder in the gleam.toml
    // <-------------------------------------------------------------- selected from here
    let toml_path =
      target.path
      |> filepath.join("gleam.toml")
    
    use gleam_toml <- result.try(
      toml_path
      |> simplifile.read
      |> result.replace_error(FailedToReadGleamToml),
    )
    
    let gleam_toml =
      gleam_toml
      |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
    simplifile.write(toml_path, gleam_toml)
    |> result.replace_error(FailedToWriteGleamToml)
    // <---------------------------------------------------------------- to here
    

    The selection goes from the comment line to the end of result.replace_error(FailedToWriteGleamToml). So the selection includes:

    • let toml_path = ... (1st statement)
    • use gleam_toml <- result.try(...) (2nd statement)
    • let gleam_toml = ... (3rd statement)
    • simplifile.write(toml_path, gleam_toml) |> result.replace_error(FailedToWriteGleamToml) (4th statement, TAIL)

    Now I need to think about what's different from extract_statements_in_tail_position. The difference may be in the use statement (the use gleam_toml <- result.try(...)).

    Let me look at what is_use does for Use statements:

    ast::Statement::Use(_) | ast::Statement::Assert(_) => {
        !completely_within(selected_range, statement_range)
    }
    

    For use statements, it just checks if the selection is completely within the statement. If it's not, we can extract the statement.

    But here's the key insight - when looking at visit_typed_statement:

    match &mut self.function {
        None => {
            self.function = match statement {
                TypedStatement::Expression(TypedExpr::Pipeline { .. }) => None,
                TypedStatement::Assert(_)
                | TypedStatement::Assignment(_)
                | TypedStatement::Expression(_) => {
                    Some(ExtractedFunction::new(ExtractedValue::Statements {
                        location: statement_location,
                        position,
                    }))
                }
                TypedStatement::Use(use_) => {
                    Some(ExtractedFunction::new(ExtractedValue::Use {
                        location: use_.call.location(),
                        type_: statement.type_(),
                    }))
                }
            }
        }
        ...
    }
    

    So when we encounter a Use statement, the value is set to ExtractedValue::Use. But then if we have a subsequent statement like Assignment, what happens?

    Some(ExtractedFunction {
        value: ExtractedValue::Use { location, .. },
        ..
    }) if location.contains_span(statement_location) => {}
    // Otherwise it means we're extracting multiple statements
    // _including_ some use expression, we fallback to extracting
    // multiple statements
    Some(ExtractedFunction {
        value: value @ ExtractedValue::Use { .. },
        ..
    }) => {
        *value = ExtractedValue::Statements {
            location: value.location().merge(&statement_location),
            position,
        };
    }
    

    So when we have a Use followed by another statement (like Assignment), it merges them into a Statements extraction.

    Hmm, but this should still work. Let me look more carefully. Let me run the tests with debug output to understand what's happening. First, let me write a test that mirrors the issue:

  18. MiniMax Assistant

    Let me instead write a test directly using the test framework. Let me look at how the test cases are constructed:

  19. MiniMax Assistant

    Now let me create a test that reproduces the bug. Let me modify a test temporarily to reproduce the bug:

  20. MiniMax Assistant

    Let me try to write a test directly in the existing test file using a temporary test that we'll later remove. First, let me check whether I can add a temporary test:

  21. MiniMax Assistant

    Now let me add a temporary test to verify the bug. Let me find a good place:

  22. MiniMax Assistant

    Let me instead directly add a test in the action.rs file. First let me look at an existing test similar to the bug:

  23. MiniMax Assistant

    OK let me write a temporary test that reproduces the bug. Let me create it as a separate test in a test file:

  24. MiniMax Assistant

    Let me look at what happens with select_until - the second parameter is find_position_of("* d") which gives the position of *. The selection ends at * d which is the start of * in a * b + c * d. So it selects:

    • let c = 3\n let d = 4\n a * b + c * (everything from start of let c to start of * d)

    The tail expression a * b + c * d is partially selected (the start of it).

    Wait, let me re-read the can_extract_statement more carefully:

  25. MiniMax Assistant

    Now let me trace through the logic for the bug scenario. The user's selection is:

    • From: start of let toml_path = ...
    • To: end of simplifile.write(toml_path, gleam_toml) |> result.replace_error(FailedToWriteGleamToml)

    The function body is:

    1. use priv <- result.try(...) (Use)
    2. use _ <- result.try(...) (Use)
    3. let toml_path = ... (Assignment)
    4. use gleam_toml <- result.try(...) (Use)
    5. let gleam_toml = ... (Assignment)
    6. simplifile.write(toml_path, gleam_toml) |> result.replace_error(FailedToWriteGleamToml) (Expression - this is the tail)

    The selection overlaps with statements 3, 4, 5, 6.

    For statement 3 (let toml_path = ...), it's an Assignment. can_extract_statement returns true. Then visit_typed_statement:

    • self.function is None
    • It's a TypedStatement::Assignment, so we set self.function = Some(Statements { location, position: NotTail })

    For statement 4 (use gleam_toml <- ...), it's a Use. can_extract_statement:

    • For Use: returns !completely_within(selected_range, statement_range). Selected range starts at let toml_path and ends at end of simplifile.write(...). The statement's range is the use statement. completely_within returns true if the selection is completely within the statement. Since selection is much larger, this is false. So returns true.
    • Then visit_typed_statement:
      • self.function is Some(Statements { ... }). The position is NotTail.
      • Looking at the match... Actually wait, it goes to the Some(...) branch.
      • Looking at the branches:
        • Some(ExtractedFunction { value: ExtractedValue::Use { location, .. }, .. }) if location.contains_span(statement_location) => {} - not applicable since current value is Statements
        • Some(ExtractedFunction { value: value @ ExtractedValue::Use { .. }, .. }) => { ... } - not applicable
        • Some(ExtractedFunction { value: ExtractedValue::Expression(_), .. }) => {} - not applicable
        • Some(ExtractedFunction { value: ExtractedValue::Statements { location, position: extracted_position }, .. }) => { ... merge ... } - this matches!
        • Some(ExtractedFunction { value: value @ ExtractedValue::PipelineSteps { .. }, .. }) => { ... } - not applicable
      • So it merges: *location = location.merge(&statement_location); *extracted_position = position;
      • The position is determined by is_in_tail_position for this statement (statement 4). Since statement 4 is not the last statement (statement 6 is the last), is_in_tail_position is false. So position is NotTail.

    For statement 5 (let gleam_toml = ...), similar to statement 4, merges into Statements with NotTail position.

    For statement 6 (simplifile.write(...), the tail expression):

    • It's an Expression statement. can_extract_statement calls can_extract_expression.
    • The expression is a Pipeline (simplifile.write(...) |> result.replace_error(...)).
    • For Pipeline: position_within(selected_range.start, first_step) && position_within(selected_range.end, last_step). The selection starts at let toml_path which is BEFORE the pipeline's first_step (simplifile.write(...)). So this returns false.
    • Therefore can_extract_expression returns false, and can_extract_statement returns false.
    • visit_typed_statement doesn't enter the extraction logic for this statement. The function is not modified.

    But wait, the snapshot shows that the entire function is extracted (just function(target, user_id) is left). Let me look at how simplifile.write(...) |> result.replace_error(...) is parsed. The tail expression is a pipeline assignment.

    Let me re-examine. The issue is the user selects simplifile.write(toml_path, gleam_toml)\n |> result.replace_error(FailedToWriteGleamToml). The selection ends at the END of this. So the selection range end is at the end of FailedToWriteGleamToml).

    Now, the tail expression is a Pipeline expression. Its location spans from simplifile.write(...) to the end of FailedToWriteGleamToml). So last_step is the end of the pipeline.

    For Pipeline:

    position_within(selected_range.start, first_step)
        && position_within(selected_range.end, last_step)
    
    • first_step is the location of simplifile.write(...). The selected range starts at let toml_path which is BEFORE simplifile.write(...). So position_within is false.
    • Therefore can_extract_expression returns false.

    OK so the pipeline is not extracted. But the user reported the WHOLE function is extracted. So there must be something else going on.

    Let me look at what statements are visited when there's a Use statement with result.try:

    Actually, let me reconsider. The issue says:

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    So when extracting, the only thing left is function(target, user_id). This means the entire function body is replaced. So the location must span from the start of the function body to the end.

    Let me look at the extract_statements_in_tail_position test more carefully. It selects:

    • let c = 3 (from start)
    • ...
    • up to * d (which is part of the tail a * b + c * d)

    The tail is partially selected (the * d part is selected, but not a * b + c ). So the tail is partially within the selection.

    For the bug scenario, the selection includes the FULL tail expression. The tail is simplifile.write(toml_path, gleam_toml)\n|> result.replace_error(FailedToWriteGleamToml). The selection ends at the END of this.

    Let me re-examine the test: find_position_of("* d") - this finds the position of * d which is a substring. The selection ends AT this position, not after. So the selection ends at the position of * in * d.

    So in extract_statements_in_tail_position, the selection goes up to the start of * d. The tail expression a * b + c * d starts at a. So the selection ends inside the tail (at *). The tail is partially selected.

    In the bug scenario, the selection ends AFTER the entire tail expression.

    Let me check the can_extract_statement logic for the tail expression when it's an Expression statement and the selection includes the entire tail:

    For an Expression statement, can_extract_statement returns can_extract_expression(expression).

    For a Pipeline expression, can_extract_expression returns true only if the selection starts within the first_step AND ends within the last_step.

    So for the bug case:

    • first_step is simplifile.write(...), which is at position X1.
    • last_step is |> result.replace_error(...), which is at position X2 (end of pipeline).
    • The selected range starts at let toml_path which is BEFORE X1.
    • So position_within(selected_range.start, first_step) is false.
    • can_extract_expression returns false.

    Hmm, but the user's bug shows the entire function body is extracted. Let me actually try to reproduce the bug first:

  26. MiniMax Assistant

    Let me actually patch the action.rs file with a temporary test to reproduce the bug:

  27. MiniMax Assistant

    Let me add a test to verify my reproduction of the issue:

  28. MiniMax Assistant

    Now let me run this test:

  29. MiniMax Assistant

    There's a string interpolation issue. The r#""# strings have r#"..."# with double #, but my test may have broken something. Let me revert and check:

  30. MiniMax Assistant

    Good. Now let me use a simpler method to add the test - direct sed/edit:

  31. MiniMax Assistant

    There's a duplicate #[test] and missing fn extract_use_in_tail_position(). Let me fix this:

  32. MiniMax Assistant

    There are duplicate #[test] because there was already a blank line #[test] before fn extract_use_in_tail_position. Let me fix this by checking the source:

  33. MiniMax Assistant

    OK, the issue was that my test_to_insert has #[test]\n but the target already had #[test] before fn extract_use_in_tail_position(). Let me adjust the test_to_insert:

  34. MiniMax Assistant

    Now let me run the test:

  35. MiniMax Assistant

    No action was found with the title "Extract function". This is the symptom of the bug. The selection triggers no action. Hmm, but the issue says the action extracts the entire function. Let me check - maybe in this test case the selection doesn't overlap with enough code. Let me try with different test that has more statements:

  36. MiniMax Assistant

    Hmm, the test code has issues - Ok("priv") is wrong because Ok("priv") would be parsed as a constructor, not a function call. Let me think. Let me look at how result.try is typically used:

    Actually, let me look at how result.try is structured. The use priv <- result.try(...) is syntactic sugar for:

    result.try(..., fn(priv) { ... })
    

    But the function Ok has type fn(...) -> ... not just fn(...). Let me just use something simpler:

  37. MiniMax Assistant

    I've reproduced the bug! Looking at the output:

    The selection was:

    let toml_path = "toml_path"
    use gleam_toml <- woo("gleam_toml")
    let gleam_toml = "gleam_toml"
    wooa(Nil)
    

    But the result is:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    
    fn function() -> Int {
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    This is incorrect because it removes the use priv <- wibble("priv") and use _ <- wobble(Nil) from main. They are still in the function body but they are not properly registered as a use in the extracted function.

    Now I understand the bug! The issue is that when we extract statements that include a Use statement at the beginning, the Use statement is being treated as a separate extraction.

    Wait, let me re-look. The expected result for the user's code is:

    fn prepare_project_structure(...) {
      // get the priv dir
      use priv <- result.try(...)
      // copy the base project to the target_path
      use _ <- result.try(...)
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    
    fn function(target: TargetPath, user_id: uuid.Uuid) -> Result(Nil, SubmitError) {
      let toml_path = ...
      use gleam_toml <- result.try(...)
      let gleam_toml = ...
      simplifile.write(toml_path, gleam_toml) |> result.replace_error(FailedToWriteGleamToml)
    }
    

    But my test shows:

    pub fn main() {
      use priv <- wibble("priv")    // <- These are kept in main, OK
      use _ <- wobble(Nil)           // <- These are kept in main, OK
      function()
    }
    
    fn function() -> Int {
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    Hmm, actually that's similar to what the user expects. The bug is the same as my reproduction shows. Let me check why this is being treated as a bug...

    Wait, the user says the expected is that the function is:

    fn prepare_project_structure(...) {
      // get the priv dir
      use priv <- result.try(...)
      // copy the base project to the target_path
      use _ <- result.try(...)
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    

    And the actual current behavior is:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    The whole body (including the two use statements) is being replaced.

    But in my test, the use statements are being kept in main. Why is mine different?

    Wait, let me look again at my test output. Let me re-check what was produced:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    

    OK so in my test, the use statements are kept but in the user's bug, they are removed. Let me check what's different.

    Actually, let me re-read the issue. The user says:

    // <----- selected from here
    let toml_path = ...
    

    So the selection starts at the let toml_path line. So the use statements are NOT in the selection. And the user expects them to remain in the original function. My test does this correctly.

    But the user says the actual result is:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    This removes the use statements. So the issue is that the entire body is extracted.

    Let me run the test again and see what the expected output should be:

    Wait, my test reproduces the BUG correctly. Look at the output:

    fn function() -> Int {
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    But the original test (the one that should work) extract_statements_in_tail_position produces:

    fn function(a: Int, b: Int) -> Int {
      let c = 3
      let d = 4
      a * b + c * d
    }
    

    OK so the actual extracted function is correct. Let me check what's in main.

    In my test:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    

    In extract_statements_in_tail_position:

    pub fn main() {
      let a = 1
      let b = 2
      function(a, b)
    }
    

    In the user's bug:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    Hmm, the user's bug shows ONLY function(target, user_id) in the original. This means even the use statements at the beginning were removed.

    Why is mine different from the user's bug? Let me think.

    Oh, I think the difference might be in what positions are used. In my test, I select from let toml_path to the end of wooa(Nil) (under last char = position of )). The selection ends AT the ), which is inside wooa(Nil).

    In the user's bug, the selection ends at the end of result.replace_error(FailedToWriteGleamToml). So it ends AFTER ).

    Let me check this. Let me adjust my test:

  38. MiniMax Assistant

    Wait, looking at the output more carefully:

    24 │+pub fn main() {
    25 │+  use priv <- wibble("priv")
    26 │+  use _ <- wobble(Nil)
    27 │+  function()
    28 │+}
    

    This is the AFTER ACTION. So the user got function() (no arguments). And:

    30 │+fn function() -> Int {
    31 │+  let toml_path = "toml_path"
    32 │+  use gleam_toml <- woo("gleam_toml")
    33 │+  let gleam_toml = "gleam_toml"
    34 │+  wooa(Nil)
    35 │+}
    

    So function() takes no arguments. But the user's bug shows function(target, user_id). So my reproduction is slightly different - the function takes no arguments because there are no variables from outside used in the extracted code.

    But the actual issue is the same: the entire function body is replaced (everything from the selection point to the end).

    Actually, looking again at the user's bug report:

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      function(target, user_id)
    }
    

    So the WHOLE function body is replaced with function(target, user_id). My test produces:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    

    So my test is correctly producing 4 statements before the function call. Let me check if the difference is just that my test has 6 statements total, and the user's bug has 6 statements total but the use statements come BEFORE the selection.

    Wait, in my test, the use statements are NOT in the selection (because selection starts at let toml_path). So they are correctly preserved.

    In the user's bug, the use statements are ALSO not in the selection. So they should also be preserved. But the user's actual output shows that even the use statements are removed.

    Hmm, let me re-read the bug carefully. Let me check if there's a difference in the code that would cause this.

    Actually, I just realized - in my test, the user is calling find_position_of("wooa(Nil)").under_last_char(). This puts the end of the selection at the last character of wooa(Nil) which is ). The selection ends AT this position. So the last character is INCLUDED in the selection.

    In the user's bug, the selection ends AFTER the last ). So the selection includes all of wooa(Nil).

    But position_within is position >= range.start && position <= range.end. So the difference might not matter for overlaps.

    Actually, the difference is that the LSP range uses half-open intervals or what? Let me check:

  39. MiniMax Assistant

    OK so src_span_to_lsp_range converts SrcSpan.start and SrcSpan.end to LSP positions. The LSP positions are 0-indexed.

    Looking at the helper functions:

    • overlaps(a, b): any of the endpoints of a is within b, or vice versa
    • within(a, b): both endpoints of a are within b
    • completely_within(a, b): both endpoints of a are STRICTLY within b (not at the boundary)
    • position_within(p, r): p >= r.start && p <= r.end

    Let me think about this more carefully. Let me trace through the bug scenario:

    Selection: from let toml_path to end of simplifile.write(...) |> result.replace_error(...).

    The function body has 6 statements:

    1. use priv <- ... - Use
    2. use _ <- ... - Use
    3. let toml_path = ... - Assignment (selected)
    4. use gleam_toml <- ... - Use (selected)
    5. let gleam_toml = ... - Assignment (selected)
    6. simplifile.write(...) |> result.replace_error(...) - Expression (selected, TAIL)

    The last_statement_location is set to the location of statement 6 (the tail).

    Now, visit_typed_statement is called for each statement. Let's trace:

    Statement 1: use priv <- ...

    • can_extract_statement: overlaps(statement_range, selected_range) - The statement is BEFORE the selection. So no overlap. Returns false.
    • No extraction logic triggered.

    Statement 2: use _ <- ...

    • Similar to statement 1. No overlap. Returns false.

    Statement 3: let toml_path = ... (Assignment, start of selection)

    • can_extract_statement: Overlaps. Not Use or Assert. For Assignment: !within(selected_range, value_range) && !completely_within(selected_range, statement_range).
    • value_range is the right side of =, which is target.path |> filepath.join("gleam.toml").
    • selected_range starts at let (start of statement 3) and ends at end of statement 6. The value_range is contained within the statement_range.
    • within(selected_range, value_range): selected_range starts at start of statement, value_range starts AFTER the =. selected_range.start is BEFORE value_range.start, so position_within(selected_range.start, value_range) is false. So within is false.
    • completely_within(selected_range, statement_range): selected_range covers the entire statement 3, statement_range is the entire statement. selected_range.start > statement_range.start is false (they're equal). So this is false.
    • Therefore !within(...) && !completely_within(...) is !false && !false = true && true = true.
    • can_extract_statement returns true.
    • In visit_typed_statement:
      • self.function is None.
      • TypedStatement::Assignment, so we set self.function = Some(ExtractedFunction::new(ExtractedValue::Statements { location: statement_location, position: NotTail })).
      • Note: position is determined by is_in_tail_position. For statement 3, it's not the last statement, so is_in_tail_position is false. Position is NotTail.

    Statement 4: use gleam_toml <- ... (Use, in selection)

    • can_extract_statement: For Use, returns !completely_within(selected_range, statement_range). selected_range is much larger than statement_range (covers statements 3-6). statement_range is contained within selected_range. completely_within is true (both endpoints of statement_range are strictly inside selected_range). So returns false.
    • No extraction logic triggered.

    Wait, but the selection ends at the end of statement 6. The use gleam_toml <- ... (statement 4) is within the selection. The selected_range.start is at let toml_path (start of statement 3). The selected_range.end is at the end of statement 6. statement 4 is between them.

    completely_within(selected_range, statement_range): is statement_range completely within selected_range? statement_range.start > selected_range.start AND statement_range.start < selected_range.end AND statement_range.end > selected_range.start AND statement_range.end < selected_range.end.

    statement_range is for use gleam_toml <- .... Its start is at use of statement 4. Its end is after the , of the use.

    selected_range.start is at let of statement 3. selected_range.end is at the end of statement 6.

    statement_range.start > selected_range.start? Yes (statement 4 comes after statement 3). statement_range.start < selected_range.end? Yes (statement 4 is before end of statement 6). statement_range.end > selected_range.start? Yes. statement_range.end < selected_range.end? Yes.

    So completely_within returns true. And the logic returns !true = false.

    Hmm, but this is what we want for a Use statement - we want to extract the entire use statement, not just a part of it. So can_extract_statement returning false here is what we want, right?

    Wait, but I want to extract statement 4 as part of the multiple statements extraction. So if can_extract_statement returns false, we skip the extraction logic, and self.function stays as Statements with only statement 3's location. That's wrong.

    Let me re-read can_extract_statement:

    ast::Statement::Use(_) | ast::Statement::Assert(_) => {
        !completely_within(selected_range, statement_range)
    }
    

    So for Use statements, if the statement is completely within the selection, we return !true = false. This means we don't extract this statement. But we DO want to extract it because the user selected it.

    Wait, this is about whether to extract the STATEMENT ITSELF. If the selection is completely within the statement (i.e., the user selected only a PART of the statement), then we don't extract the statement. We want to go deeper.

    If the selection covers the entire statement AND MORE (i.e., the user is selecting the statement plus other things), we return true (not completely_within).

    So the logic is:

    • If the selection completely covers the statement (and maybe more): return true. We want to extract this statement.
    • If the selection is only a part of the statement: return false. We want to go deeper.

    Wait, but completely_within(selected_range, statement_range) is true when selected_range is strictly inside statement_range, not the other way around. Let me re-check:

    pub fn completely_within(a: Range, b: Range) -> bool {
        a.start > b.start && a.start < b.end && a.end > b.start && a.end < b.end
    }
    

    So completely_within(a, b) returns true if a is strictly inside b. In our case, completely_within(selected_range, statement_range) returns true if the selection is strictly inside the statement.

    So the logic is:

    • If selection is strictly inside the statement (selection is a partial selection of the statement): return !true = false. We want to go deeper into the statement.
    • Otherwise (selection covers the statement and possibly more): return !false = true. We want to extract this statement.

    OK so for statement 4 (Use), the selection is NOT strictly inside the statement. The selection is much larger than the statement. So completely_within(selected_range, statement_range) is false. So can_extract_statement returns true. So we extract statement 4.

    But wait, I said above that completely_within would be true. Let me re-check.

    completely_within(selected_range, statement_range) is true when:

    • selected_range.start > statement_range.start (selected starts after statement starts)
    • selected_range.start < statement_range.end (selected starts before statement ends)
    • selected_range.end > statement_range.start (selected ends after statement starts)
    • selected_range.end < statement_range.end (selected ends before statement ends)

    For statement 4:

    • statement_range.start = position of use in statement 4
    • statement_range.end = end of statement 4 (after the ,)

    For the selection:

    • selected_range.start = position of let in statement 3 (BEFORE statement_range.start)
    • selected_range.end = end of statement 6 (AFTER statement_range.end)

    So:

    • selected_range.start > statement_range.start? FALSE (selected starts BEFORE statement)
    • So completely_within returns false. So can_extract_statement returns true.

    OK so the Use statement 4 will be extracted. Let me continue:

    Statement 5: let gleam_toml = ... (Assignment, in selection)

    • Similar to statement 3, but statement_range is within selected_range.
    • For Assignment: !within(selected_range, value_range) && !completely_within(selected_range, statement_range).
    • within(selected_range, value_range): selected_range is larger than value_range. So selected_range.start is BEFORE value_range.start, hence position_within(selected_range.start, value_range) is false. So within is false.
    • completely_within(selected_range, statement_range): selected_range is larger, not smaller. So this is false.
    • Therefore !false && !false = true.
    • can_extract_statement returns true.
    • In visit_typed_statement:
      • self.function is Some(Statements { location: stmt3_loc, position: NotTail }).
      • Match arm: Some(ExtractedFunction { value: ExtractedValue::Statements { location, position: extracted_position }, .. }) => { *location = location.merge(&statement_location); *extracted_position = position; }
      • So location is merged to span stmt3 to stmt5. Position becomes NotTail (since stmt5 is not the last).

    Statement 6: simplifile.write(...) |> result.replace_error(...) (Expression, in selection, TAIL)

    • This is an Expression statement. can_extract_statement calls can_extract_expression(expression).
    • The expression is a Pipeline.
    • For Pipeline: position_within(selected_range.start, first_step) && position_within(selected_range.end, last_step).
    • first_step is simplifile.write(...). last_step is |> result.replace_error(...).
    • selected_range.start is at let toml_path (BEFORE first_step). So position_within(selected_range.start, first_step) is false.
    • So can_extract_expression returns false.
    • Therefore can_extract_statement returns false.
    • No extraction logic triggered.

    So after visiting all statements, self.function is:

    • Some(ExtractedFunction { value: Statements { location: stmt3 to stmt5, position: NotTail }, parameters: [], returned_variables: [] })

    Wait, but the bug says the WHOLE function is extracted. Let me look at the visit_typed_function to understand:

  40. MiniMax Assistant

    Let me check what visit_typed_function calls - it calls visit_typed_function (the default visitor). Let me look at what the default does:

  41. MiniMax Assistant

    So visit_typed_function calls visit_typed_statement for each statement. But there are no block expressions to visit. Wait, but statements contain expressions (like let x = expr). Those are visited in visit_typed_statement. Let me check:

  42. MiniMax Assistant

    OK so when visiting a statement, the inner expression is also visited. This is important because in the visit_typed_expr visitor, the expression might be set as the extraction target.

    Wait, but in visit_typed_expr:

    if self.function.is_none() {
        // If this expression is fully selected, we mark it as being extracted.
        if self.can_extract_expression(expression) {
            self.function = Some(ExtractedFunction::new(ExtractedValue::Expression(
                expression,
            )));
        }
    }
    

    So if self.function is None and the expression can be extracted, we set it as Expression. But in our case, after statement 3 is processed, self.function is Some. So we wouldn't override it.

    But there's also register_referenced_variable which is called for variables. Let me check where this is triggered...

    Actually let me look at the actual debug output. Let me add some debug prints to understand:

    Actually, let me run the test and look at the snapshot produced:

  43. MiniMax Assistant

    OK so my test reproduction shows:

    • Before: 6 statements
    • Selection: from let toml_path to end of wooa(Nil) (the last char of ))
    • After: 3 statements (use priv, use _, function()), and the function function has 4 statements.

    This is actually the EXPECTED behavior per the user's issue. Wait, this is the CURRENT (buggy) behavior. The user wants:

    • Before: 6 statements
    • Selection: from let toml_path to end of wooa(Nil)
    • After: 3 statements (use priv, use _, function()), and the function function has 4 statements.

    That's actually what my test produces! So the bug IS reproduced. Let me look at it more carefully. The snapshot shows the extracted function has 4 statements (the same as selected), so the actual selection is correct.

    Wait, but in the user's bug, the original function loses the use statements. Let me re-read the user's bug...

    Looking at the user's bug again:

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      function(target, user_id)
    }
    

    Wait, my test reproduction produces:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    

    The two use statements ARE preserved. But the user says they are NOT preserved.

    Let me re-read more carefully. Maybe the user's example is slightly different. Let me look at the expected output again:

    instead of the expected:

    /// prepare an empty gleam project in the `target_path`
    ///
    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(...)
      // copy the base project to the target_path
      use _ <- result.try(...)
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    
    fn function(
      target: TargetPath,
      user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      let toml_path = ...
      use gleam_toml <- result.try(...)
      let gleam_toml = ...
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
    }
    

    So the expected output:

    • prepare_project_structure keeps the use statements
    • function has the 4 extracted statements

    This is the SAME as my test reproduction! So my reproduction IS the bug, just with a slightly different effect on the outer function. Let me re-look at the bug report.

    OK wait. Looking at the bug description more carefully, it says:

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    So the user says the actual result is that prepare_project_structure becomes ONLY function(target, user_id). But my test produces the correct behavior where the use statements are preserved.

    Maybe the user's neovim or another LSP behavior is different. Let me check if there's a difference based on what the selection starts at.

    Actually, looking at the issue again, the user's selection is "from the comment line above let toml_path to the end". Let me check the comments. Actually the comment is on the line above let toml_path. So the selection might actually start with the comment.

    Let me check what happens if the selection includes the comment. Actually, the comments are stripped during parsing, so the selection range shouldn't be affected.

    Let me try a different scenario. Maybe the user has a slightly different issue. Let me run the existing extract_statements_in_tail_position test to see what it does:

    Actually wait, looking at my test reproduction carefully:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    And the selected statements:

    • let toml_path = "toml_path" (assignment)
    • use gleam_toml <- woo("gleam_toml") (use)
    • let gleam_toml = "gleam_toml" (assignment)
    • wooa(Nil) (expression, tail)

    The extracted function:

    fn function() -> Int {
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    And the resulting main:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    

    This is actually the expected behavior! Let me check the user's bug again more carefully...

    Hmm, looking at the user's expected output, the use priv and use _ statements ARE preserved in prepare_project_structure. So my test reproduces the bug correctly (or rather, doesn't reproduce the issue since the result is what's expected).

    Wait wait, let me re-read the issue more carefully:

    Extract function extracts too much

    When triggering Extract function with the selection: ... It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    instead of the expected:

    fn prepare_project_structure(...) {
      use priv <- result.try(...)
      use _ <- result.try(...)
      function(target, user_id)
    }
    

    OK so the bug says the actual is function(target, user_id) ONLY, but the expected is use priv <- result.try(...), use _ <- result.try(...), function(target, user_id). My test produces the EXPECTED behavior, not the actual buggy behavior. Hmm.

    Let me check what might cause the user's reported behavior. Maybe the selection is at a different position.

    Wait, let me re-read the issue. The selection starts at:

    // replace $PROJECT_NAME placeholder in the gleam.toml
    // <-------------------------------------------------------------- selected from here
    let toml_path =
    

    Hmm, looking at the comment // <-------------------------------------------------------------- selected from here. This is BELOW the comment, so the selection starts at the line let toml_path =. So my test should match.

    But wait, the user says the actual behavior is that the use priv and use _ statements are ALSO removed. That can't be right if my test doesn't reproduce that.

    Let me check with a different scenario. Maybe the issue is that the selection starts BEFORE the use priv statement.

    Actually, let me look at the issue title again: "Extract function extracts too much". Maybe the user means that too much code is being extracted, including the use priv and use _ statements. Let me re-read:

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    Yes, "leaving only function(target, user_id)" means the entire function body is extracted. So the user is reporting that when they select from let toml_path to the end, ALL of the function body is extracted into the new function (including use priv and use _).

    But my test doesn't reproduce this. My test correctly leaves the use priv and use _ in the original.

    Hmm, let me check more carefully. Let me try modifying my test to NOT include any of the use statements before the selection:

    Actually wait, in my test, the use statements are NOT in the selection. The selection starts at let toml_path. So the use statements should remain in main. And my test shows they do.

    But the user's bug shows they DON'T remain. So there's something different.

    Let me look at this more carefully. Maybe the difference is in how the Use statement is handled. The user has result.try(...) which has a specific structure. Let me re-check the test result.

    Wait, maybe the bug is actually that the extracted function is too small? Let me look at the user's example again:

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    The user is saying that the prepare_project_structure function has only function(target, user_id). This means the body is fully replaced.

    instead of the expected:

    fn prepare_project_structure(...) {
      use priv <- result.try(...)
      use _ <- result.try(...)
      function(target, user_id)
    }
    

    The expected is that the use statements are preserved.

    So the bug is that the use statements at the beginning of the function are being removed. This is the actual bug behavior.

    My test shows the correct behavior (the use statements are preserved). So either:

    1. My test doesn't reproduce the bug
    2. The bug has been fixed already
    3. My test is different from the user's scenario in some subtle way

    Let me check if the bug is in fact different. Let me look at the visit_typed_function more carefully:

    Wait, let me look at the actual issue title: "Extract function extracts too much". So the function extracts too much. The actual extracted function is the entire body. This means the location set in the Statements extraction covers the entire body, not just the selected portion.

    Hmm, but my test shows the extracted function correctly covers just the selected statements. So my test is passing.

    Wait, let me look at my test reproduction again. The selection starts at let toml_path and ends at the last character of wooa(Nil). So the end of selection is at the position of ) (inside the function call).

    But in the user's scenario, the selection ends at the END of result.replace_error(FailedToWriteGleamToml). So the end position might be different.

    Actually, let me think about this. The selection ends at:

    • For LSP, the end position is exclusive (the selection is from start to end, where end is not included).
    • In position_within, it's position >= range.start && position <= range.end. So end is inclusive.

    Hmm, but for the user's bug, the selection ends at the end of the line |> result.replace_error(FailedToWriteGleamToml). So end position is at the line break.

    Let me modify my test to use a more precise end position.

    Actually wait, let me first look at this differently. Let me try to write a test that exactly matches the user's code.

    Actually, I wonder if my test is correct but I'm missing something. Let me look at the snapshot again:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    

    This is exactly what the user expects! So my test passes the desired behavior. Hmm.

    But the user says the bug is that the function extracts too much. So maybe my test isn't reproducing it.

    Let me try with a different selection. What if the selection covers the WHOLE function (including the use statements)?

    Wait actually, let me re-read the bug report once more. I think I was wrong. The bug report says the selection is:

      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <-------------------------------------------------------------- selected from here
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    

    This is the SELECTION range. The <---- markers indicate the start and end of the selection.

    But what if the comment // replace $PROJECT_NAME placeholder in the gleam.toml is ABOVE the selection? Let me look:

    The user's code:

      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <-------------------------------------------------------------- selected from here
      let toml_path =
    

    So the selection starts on the line with <---- selected from here. That line is the comment // <---- selected from here. So the selection starts at the start of that comment line, NOT at the let toml_path line.

    Wait no, that doesn't make sense either. The marker is just indicating where the selection starts. The actual selection starts at let toml_path = ....

    Let me just look at the actual code that should be selected:

    The user wrote:

    // get the priv dir
    use priv <- result.try(...)
    
    // copy the base project to the target_path
    use _ <- result.try(...)
    
    // replace $PROJECT_NAME placeholder in the gleam.toml
    // <-------------------------------------------------------------- selected from here
    let toml_path =
      target.path
      |> filepath.join("gleam.toml")
    
    use gleam_toml <- result.try(
      toml_path
      |> simplifile.read
      |> result.replace_error(FailedToReadGleamToml),
    )
    
    let gleam_toml =
      gleam_toml
      |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
    simplifile.write(toml_path, gleam_toml)
    |> result.replace_error(FailedToWriteGleamToml)
    // <---------------------------------------------------------------- to here
    

    So the selection starts at let toml_path = and ends at the end of |> result.replace_error(FailedToWriteGleamToml).

    In my test, I have:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    Selection from let toml_path to end of wooa(Nil). That's similar to the user's case.

    But in my test, the result is what the user expects (the use statements are preserved). So my test does NOT reproduce the bug.

    Hmm, let me look at this more carefully. Maybe there's something subtle.

    Wait, let me look at the actual output from my test snapshot:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    

    OK so the use statements are preserved. This is the EXPECTED behavior. The user's bug is that they're NOT preserved.

    Maybe the bug is in a different scenario. Let me look at the user's expected output more carefully:

    /// prepare an empty gleam project in the `target_path`
    ///
    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    

    So the expected result has:

    • use priv <- result.try(...)
    • use _ <- result.try(...)
    • function(target, user_id)

    And the actual (buggy) result has:

    • function(target, user_id) ONLY.

    So the use statements are being removed.

    Wait, I wonder if the bug is in the visit_typed_function or visit_typed_expr_block where last_statement_location is set. Let me look again:

  44. MiniMax Assistant

    Hmm. Let me look at visit_typed_function more carefully. The default ast::visit::visit_typed_function calls visit_typed_statement for each statement. So visit_typed_statement is called for each statement in the function body.

    The last_statement_location is set to the location of the LAST statement in the function body (statement 6: simplifile.write(...) |> result.replace_error(...)).

    Now is_in_tail_position is:

    let is_in_tail_position =
        self.last_statement_location
            .is_some_and(|last_statement_location| {
                last_statement_location == statement_location
            });
    

    This is true if the current statement's location equals the last_statement_location. So only the very last statement is in tail position.

    For statement 6, is_in_tail_position is true. So position is Tail { type_: ... }.

    But for statement 6, can_extract_statement returns false (because the Pipeline check fails). So visit_typed_statement doesn't enter the extraction logic, and self.function is NOT updated.

    So self.function remains as Statements { location: stmt3 to stmt5, position: NotTail }.

    Hmm, but what about the merge logic in visit_typed_statement?

    Actually wait, let me look again. The match is:

    match &mut self.function {
        None => { ... }
        
        Some(ExtractedFunction { value: ExtractedValue::Use { location, .. }, .. }) 
            if location.contains_span(statement_location) => {}
        Some(ExtractedFunction { value: value @ ExtractedValue::Use { .. }, .. }) => {
            *value = ExtractedValue::Statements { ... };
        }
        
        Some(ExtractedFunction { value: ExtractedValue::Expression(_), .. }) => {}
        
        Some(ExtractedFunction { value: ExtractedValue::Statements { location, position: extracted_position }, .. }) => {
            *location = location.merge(&statement_location);
            *extracted_position = position;
        }
        Some(ExtractedFunction { value: value @ ExtractedValue::PipelineSteps { .. }, .. }) => {
            *value = ExtractedValue::Statements { ... };
        }
    }
    

    This match is inside the if self.can_extract_statement(statement) block. So if can_extract_statement returns false, we don't update self.function.

    OK so for statement 6, can_extract_statement returns false. We skip the match. self.function stays the same.

    Hmm, let me re-check can_extract_statement for the Tail expression. The expression is simplifile.write(toml_path, gleam_toml) |> result.replace_error(FailedToWriteGleamToml). This is a Pipeline expression.

    For Pipeline: position_within(selected_range.start, first_step) && position_within(selected_range.end, last_step).

    • first_step = simplifile.write(toml_path, gleam_toml). selected_range.start is at let toml_path, which is BEFORE first_step.start. So position_within(selected_range.start, first_step) is false.

    So can_extract_expression returns false, and can_extract_statement returns false.

    But wait, this is just for the EXPRESSION statement check. What about the function as a whole? Is there logic that updates last_statement_location differently for expressions?

    Let me look at visit_typed_expr:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        if self.function.is_none() {
            if self.can_extract_expression(expression) {
                self.function = Some(ExtractedFunction::new(ExtractedValue::Expression(
                    expression,
                )));
            }
        }
        
        let last_statement_location = self.last_statement_location;
        if let TypedExpr::Fn { body, .. } = expression {
            self.last_statement_location = Some(body.last().location());
        }
        
        ast::visit::visit_typed_expr(self, expression);
        
        self.last_statement_location = last_statement_location;
    }
    

    So visit_typed_expr checks if the expression can be extracted as a single expression. If self.function.is_none() AND can_extract_expression returns true, it sets the function.

    For the Tail expression (Pipeline), can_extract_expression returns false. So nothing happens.

    But wait, in the user's bug, the use statements at the beginning are being removed. Let me think about what could cause this.

    Oh! I see. Let me re-read the visit_typed_statement. For Use statements:

    ast::Statement::Use(_) | ast::Statement::Assert(_) => {
        !completely_within(selected_range, statement_range)
    }
    

    For statement 1 (use priv <- ...), the statement_range is the entire Use statement. selected_range is from let toml_path to end of simplifile.write(...). So selected_range is AFTER statement_range.

    completely_within(selected_range, statement_range):

    • selected_range.start > statement_range.start? FALSE (selected starts AFTER statement ends).
    • So completely_within is false. Returns !false = true.

    So can_extract_statement returns TRUE for statement 1! And then visit_typed_statement enters the extraction logic:

    match &mut self.function {
        None => {
            self.function = match statement {
                TypedStatement::Expression(TypedExpr::Pipeline { .. }) => None,
                TypedStatement::Assert(_)
                | TypedStatement::Assignment(_)
                | TypedStatement::Expression(_) => {
                    Some(ExtractedFunction::new(ExtractedValue::Statements {
                        location: statement_location,
                        position,
                    }))
                }
                TypedStatement::Use(use_) => {
                    Some(ExtractedFunction::new(ExtractedValue::Use {
                        location: use_.call.location(),
                        type_: statement.type_(),
                    }))
                }
            }
        }
        ...
    }
    

    self.function is None. Statement is Use. So self.function is set to Some(Use { location: use_.call.location(), type_: ... }).

    But this is wrong! The user's selection is from statement 3 onwards, not statement 1.

    Hmm wait, let me re-check. overlaps is:

    pub fn overlaps(a: Range, b: Range) -> bool {
        position_within(a.start, b)
            || position_within(a.end, b)
            || position_within(b.start, a)
            || position_within(b.end, a)
    }
    

    So overlaps(statement_range, selected_range) returns true if any endpoint of either is within the other. For statement 1:

    • statement_range.start is at the start of use priv <- ...
    • statement_range.end is at the end of use priv <- ...
    • selected_range.start is at let toml_path (AFTER statement_range.end)
    • selected_range.end is at the end of simplifile.write(...) (AFTER statement_range.end)

    So:

    • position_within(selected_range.start, statement_range): selected_range.start is AFTER statement_range.end. So position is NOT within statement_range. FALSE.
    • position_within(selected_range.end, statement_range): selected_range.end is AFTER statement_range.end. So FALSE.
    • position_within(statement_range.start, selected_range): statement_range.start is BEFORE selected_range.start. So FALSE.
    • position_within(statement_range.end, selected_range): statement_range.end is BEFORE selected_range.start. So FALSE.

    So overlaps returns false. So can_extract_statement returns false at the very first check.

    So self.function should NOT be set for statement 1. Let me re-check.

    OK so overlaps returns false, which means can_extract_statement returns false. Good.

    But wait, in my test, the result shows the use statements are preserved. So the logic works correctly in my test. But the user's bug shows they're not preserved.

    Hmm, let me look at my test more carefully. Let me check the actual snapshot output:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    

    vs the user's bug:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    So in mine, the use statements are preserved. In the user's, they're not.

    Wait, maybe my test is wrong in that the test expected behavior matches the actual behavior (both have use statements preserved). But the user is saying the actual behavior is function() only, and the expected is with use statements preserved.

    So the test SHOULD pass with use statements preserved. But the user says the test FAILS with use statements removed.

    But my test passes! So there's a discrepancy.

    Hmm, let me look more carefully. Maybe there's a different scenario.

    Actually, looking at my test result once more:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    
    fn function() -> Int {
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    OK so this is what's produced. The user's expected output is similar to this (with the use statements preserved).

    But the user says the actual output is:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    So the user is reporting that the use statements are being removed in their case, but not in mine.

    Let me look more carefully at the user's scenario vs mine. Maybe there's a difference in the position where the selection starts. Let me consider:

    User's selection starts at let toml_path which is on line 18 of their code (after use priv, use _, // replace comment).

    My selection starts at let toml_path which is on line 4 of my test code.

    Both start at let toml_path. So the starting positions should be similar.

    Maybe the difference is in the End position. Let me check.

    In my test, I use find_position_of("wooa(Nil)").under_last_char(). This finds wooa(Nil) and goes to the last char ). So the selection end is at position of ).

    In the user's code, the selection ends at the end of result.replace_error(FailedToWriteGleamToml). The end of this is at position right after ).

    Hmm, the difference is ) vs after ). Let me try both scenarios.

    Actually wait, let me look at the test more carefully. The user's selection might span BEYOND the ) to the end of line. Let me update my test:

  45. MiniMax Assistant

    Let me think about this differently. Let me try with various selection start positions:

  46. MiniMax Assistant

    Wait, I made an error - the under_char is supposed to give the position of the char in the value string. Let me check:

  47. MiniMax Assistant

    So under_char(')') finds the position of ) in the value wooa(Nil), which is position 5. So the position is offset by 5 from the start of wooa(Nil).

    So with find_position_of("wooa(Nil)").under_char(')'), the selection ends at the ) character.

    With find_position_of("wooa(Nil)").under_last_char, it ends at the last character ).

    Both are the same. Let me try under_char('"') instead - but wooa(Nil) doesn't have ". Let me try something different. Let me explicitly construct a position beyond the last ):

  48. MiniMax Assistant

    Let me actually look at this from a different angle. Let me see what happens if I select including wooa(Nil)\n - going beyond the last character:

  49. MiniMax Assistant

    So I can use with_char_offset to add an offset. Let me try with_char_offset(8) to go beyond wooa(Nil):

  50. MiniMax Assistant

    OK so the behavior is the same. The use statements ARE preserved. So my test reproduces what the user expects, not the bug.

    Hmm. Let me look at this issue from another angle. Maybe the bug is about the parameters being added incorrectly. Let me look at the issue again.

    Actually, wait! Let me re-read the user's bug more carefully:

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    Hmm. Let me think about what could cause this. If function(target, user_id) is in the original function, that means the extracted function has target and user_id as parameters. So those parameters were correctly identified.

    Let me look at what could cause the WHOLE function body to be replaced. If the location of the extracted statements is from the beginning of the function body to the end, then this would happen.

    Let me see... Looking at the code_actions method:

    ExtractedValue::Statements {
        location,
        position: StatementPosition::NotTail,
    } => self.extract_statements(
        location,
        extracted.parameters,
        extracted.returned_variables,
        end,
    ),
    

    location here is the merged location from all statements. extract_statements calls:

    let code = code_at(self.module, location);
    ...
    self.edits.replace(location, call);
    ...
    self.edits.insert(function_end, function);
    

    So self.edits.replace(location, call) replaces the code at the location. If the location covers the WHOLE function body, then the whole body is replaced.

    So the bug must be that the location is incorrectly set to the whole function body.

    Let me check when the location is set. In visit_typed_statement:

    Some(ExtractedFunction {
        value:
            ExtractedValue::Statements {
                location,
                position: extracted_position,
            },
        ..
    }) => {
        *location = location.merge(&statement_location);
        *extracted_position = position;
    }
    

    So the location is merged. If somehow we call this with the FIRST statement's location, the result would be the merged location of the first and last selected statements.

    Hmm, but in my trace, the location is only set when we encounter a statement that can be extracted. And the first statement to be extracted is statement 3 (let toml_path), not statement 1.

    Wait, maybe the issue is that for Use statements that come BEFORE the selection, can_extract_statement returns true incorrectly?

    Let me check. For statement 1 (use priv <- ...):

    • statement_range = location of use priv <- ...
    • selected_range = from let toml_path to end of simplifile.write(...)
    • overlaps(statement_range, selected_range):
      • position_within(statement_range.start, selected_range) - statement_range.start is BEFORE selected_range.start. FALSE.
      • position_within(statement_range.end, selected_range) - statement_range.end is BEFORE selected_range.start. FALSE.
      • position_within(selected_range.start, statement_range) - selected_range.start is AFTER statement_range.end. FALSE.
      • position_within(selected_range.end, statement_range) - selected_range.end is AFTER statement_range.end. FALSE.
    • So overlaps returns FALSE.
    • can_extract_statement returns FALSE.

    So statement 1 doesn't enter the extraction logic.

    OK my trace was correct. So how can the user's bug be that the entire function body is extracted?

    Hmm, maybe the user is reporting a slightly different issue. Let me check the user's expected output once more:

    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    

    vs the actual:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    In the actual, the function body is JUST function(target, user_id). The use statements at the beginning are GONE.

    This is what the user is reporting. But my test doesn't reproduce this.

    Let me check if maybe the user is using an OLDER version of gleam. They say "Using gleam 1.16.0". Let me check if this bug exists in 1.16.0:

  51. MiniMax Assistant

    So we're working with gleam 1.17.0. Let me check git log to see if the bug was already fixed:

  52. MiniMax Assistant

    Let me try to actually test the bug with the user's actual code. Let me write a more comprehensive test:

  53. MiniMax Assistant

    OK so the test reproduces the same behavior. The use statements are preserved.

    Wait, but the test is FAILING. That's because there's no existing snapshot for test_repro_user_issue. The actual output is shown in the diff. Let me see what's actually being produced:

    pub fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: String,
    ) -> Result(Nil, SubmitError) {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    
    fn function() -> Result(Nil, SubmitError) {
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    OK so the actual behavior:

    1. prepare_project_structure keeps use priv <- wibble("priv") and use _ <- wobble(Nil) and adds function() at the end.
    2. function has the 4 extracted statements.

    This is the EXPECTED behavior per the user! But the user is reporting that the actual is different.

    Wait, let me re-read the bug description once more very carefully:

    When triggering Extract function with the selection: [selection shown] It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    instead of the expected: [expected shown with use statements preserved]

    OK so the user says the bug produces:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    This is the BUGGY behavior. But my test shows the CORRECT behavior.

    So either:

    1. The bug is already fixed in this version
    2. My test doesn't reproduce the bug (different scenario)

    Let me check the git log for changes to the extract function code:

  54. MiniMax Assistant

    OK let me actually look at the user's issue more carefully and try to reproduce it. The user says the selection is:

      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <-------------------------------------------------------------- selected from here
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    
      use gleam_toml <- result.try(
        toml_path
        |> simplifile.read
        |> result.replace_error(FailedToReadGleamToml),
      )
    
      let gleam_toml =
        gleam_toml
        |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
      // <---------------------------------------------------------------- to here
    

    I notice the tail expression is:

    simplifile.write(toml_path, gleam_toml)
    |> result.replace_error(FailedToWriteGleamToml)
    

    This is a Pipeline where the first step is simplifile.write(toml_path, gleam_toml) and the second step is |> result.replace_error(FailedToWriteGleamToml).

    Hmm. Let me look at the previous test, extract_statements_in_tail_position:

    pub fn main() {
      let a = 1
      let b = 2
      let c = 3
      let d = 4
      a * b + c * d
    }
    

    Selection: from let c to * d (start of * in * d).

    Output:

    pub fn main() {
      let a = 1
      let b = 2
      function(a, b)
    }
    
    fn function(a: Int, b: Int) -> Int {
      let c = 3
      let d = 4
      a * b + c * d
    }
    

    OK so in this case, the tail a * b + c * d is partially selected (only * d part is selected, not a * b + c ).

    In my test, the tail wooa(Nil) is FULLY selected (the whole thing). Hmm.

    Let me try with partial selection of the tail:

  55. MiniMax Assistant

    OK so when partially including the tail, the extraction also works correctly.

    Hmm. So my tests don't reproduce the user's bug. Let me look at this from a different angle. Let me look at what happens when we have:

    • Multiple use statements
    • A tail expression that is a use statement

    Actually wait, let me look at the user's code more carefully. The tail expression is:

    simplifile.write(toml_path, gleam_toml)
    |> result.replace_error(FailedToWriteGleamToml)
    

    This is a Pipeline. The first step is simplifile.write(toml_path, gleam_toml) and the second step is |> result.replace_error(FailedToWriteGleamToml).

    Hmm, let me check what use gleam_toml <- result.try(...) parses to. This is sugar for:

    result.try(..., fn(gleam_toml) { ... })
    

    Where result.try has type Result(a, e), fn(a -> Result(b, e)) -> Result(b, e).

    So the function callback is what comes after the use. So the location of the use statement spans the entire use plus the callback body.

    Wait, in the user's code:

    use gleam_toml <- result.try(
      toml_path
      |> simplifile.read
      |> result.replace_error(FailedToReadGleamToml),
    )
    

    The callback body for this use is everything AFTER this use, including the let gleam_toml and the tail expression. So the use's body spans from after the , to the end of the function.

    Hmm, let me check. Actually the use callback body includes the subsequent statements.

    Let me look at how Use statements are represented in the AST:

  56. MiniMax Assistant

    So a Use statement has:

    • call: the typed function call
    • location: location of the entire use line
    • right_hand_side_location: location of the right hand side
    • assignments_location: location of the patterns on the left of <-
    • assignments: the patterns

    The Use statement's location() is the location field, which is just the use line, NOT including the callback body.

    Now let me trace through my test. The test code is:

    pub fn main() {
      use priv <- wibble("priv")              // Use statement 1
      use _ <- wobble(Nil)                    // Use statement 2
      let toml_path = "toml_path"             // Assignment statement 3
      use gleam_toml <- woo("gleam_toml")     // Use statement 4
      let gleam_toml = "gleam_toml"           // Assignment statement 5
      wooa(Nil)                                // Expression statement 6 (tail)
    }
    

    Selection: from start of statement 3 to end of statement 6.

    Let me trace:

    visit_typed_function:

    • Sets last_statement_location to the location of statement 6 (the tail).
    • Calls visit_typed_function (default) which iterates over statements.

    visit_typed_expr_block:

    • The function body is a block. last_statement_location is set to the location of statement 6.
    • Actually wait, visit_typed_function doesn't go through visit_typed_expr_block because the function body is the block of statements directly. Let me check.

    Actually, the function body is [TypedStatement], not a Block expression. So visit_typed_function doesn't go through visit_typed_expr_block. Instead, it goes through the default visit_typed_function which calls visit_typed_statement for each statement.

    Hmm wait, let me check. Looking at visit_typed_function:

    pub fn visit_typed_function<'a, V>(v: &mut V, fun: &'a TypedFunction)
    where
        V: Visit<'a> + ?Sized,
    {
        for argument in fun.arguments.iter() {
            ...
        }
        if let Some(annotation) = &fun.return_annotation {
            ...
        }
        for statement in &fun.body {
            v.visit_typed_statement(statement);
        }
    }
    

    Yes, it calls visit_typed_statement for each statement. So visit_typed_expr_block is NOT called for the function body directly.

    So last_statement_location is set in visit_typed_function and never changed.

    For each statement, visit_typed_statement is called.

    Now my trace:

    Statement 1: use priv <- wibble("priv"). can_extract_statement returns false (no overlap with selection). Statement 2: use _ <- wobble(Nil). can_extract_statement returns false (no overlap with selection). Statement 3: let toml_path = "toml_path".

    • can_extract_statement returns true.
    • In visit_typed_statement: self.function is None. Set to Some(Statements { location: stmt3_loc, position: NotTail }).
    • Then visits the value expression "toml_path" via visit_typed_assignment -> visit_typed_expr -> can_extract_expression. The expression "toml_path" has a location within the selection. overlaps is true. For TypedExpr::String, returns !completely_within(selected_range, expression_range). selected_range is large, expression_range is small. completely_within returns true. So can_extract_expression returns !true = false.
    • No update to self.function.

    Statement 4: use gleam_toml <- woo("gleam_toml").

    • can_extract_statement returns true (overlap, not completely within).
    • In visit_typed_statement: self.function is Some(Statements). Match arm for Some(Statements):
      • location = location.merge(&stmt4_loc)
      • extracted_position = NotTail (statement 4 is not the last)
    • Then visits the call expression woo("gleam_toml") via visit_typed_use -> visit_typed_expr -> can_extract_expression. The expression woo("gleam_toml") is within the selection. overlaps is true. For TypedExpr::Call, returns !completely_within(selected_range, expression_range). selected_range is large, expression_range is small. completely_within returns true. So can_extract_expression returns !true = false.
    • No update to self.function.

    Statement 5: let gleam_toml = "gleam_toml". Similar to statement 3. Merged into Statements.

    Statement 6: wooa(Nil). This is the tail.

    • can_extract_statement calls can_extract_expression(wooa(Nil)). The expression wooa(Nil) is within the selection. overlaps is true. For TypedExpr::Call, returns !completely_within(selected_range, expression_range). selected_range is large (covers statements 3-6). expression_range is wooa(Nil). completely_within returns true. So can_extract_expression returns !true = false.
    • can_extract_statement returns false.
    • No update to self.function.

    After all statements, self.function is:

    • Some(Statements { location: stmt3 to stmt5, position: NotTail })

    This is what the snapshot shows. The extraction should produce:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      function()
    }
    
    fn function() -> Int {
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    This is what we got. So my test produces the EXPECTED behavior.

    So why does the user report the bug?

    Wait, let me look at the user's code once more:

      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
    

    The use statement's body includes the subsequent statements. Let me check result.try more carefully.

    result.try has type:

    fn try(result: Result(a, e), callback: fn(a) -> Result(b, e)) -> Result(b, e)
    

    When desugared, use priv <- result.try(...) becomes:

    result.try(
      application.priv_directory("gleeps") |> result.replace_error(FailedToFindPrivDirectory),
      fn(priv) { ... subsequent statements ... }
    )
    

    So the callback fn(priv) { ... } contains the subsequent statements. The Use statement's call expression contains a Call to result.try with arguments. The second argument is a Fn expression containing the body.

    Hmm, but the Use statement's location is just the use line, not the callback body.

    OK let me think. Maybe the difference is in what the Use statement's CALL expression location is.

    Actually, let me look at this more carefully. The user's tail expression:

    simplifile.write(toml_path, gleam_toml)
    |> result.replace_error(FailedToWriteGleamToml)
    

    This is a Pipeline. But the user uses |> result.replace_error(...) which is a function call applied as a pipeline step. So the Pipeline has:

    • first_value: simplifile.write(toml_path, gleam_toml) (a Call)
    • assignments: [(|> result.replace_error(FailedToWriteGleamToml), PipeLineAssignmentKind)]

    The Pipeline's location spans from simplifile to FailedToWriteGleamToml).

    Now let me check can_extract_expression for the Pipeline:

    • first_step is simplifile.write(toml_path, gleam_toml). Its location starts at simplifile.
    • last_step is result.replace_error(FailedToWriteGleamToml). Its location ends at FailedToWriteGleamToml).
    • selected_range.start is at let toml_path which is BEFORE simplifile.
    • position_within(selected_range.start, first_step) returns false.
    • So can_extract_expression returns false.

    OK so the Pipeline tail is not extracted as an expression.

    But what about for the inner Call simplifile.write(toml_path, gleam_toml)? Its location starts at simplifile and ends at ). This is within the selection.

    • overlaps is true.
    • For Call: !completely_within(selected_range, expression_range). selected_range is large, expression_range is small. completely_within returns true. Returns !true = false.
    • So can_extract_expression returns false for the inner Call too.

    OK so no expression within the tail is extracted.

    Hmm, so my trace says no expression within statement 6 should be extracted. Let me double-check with debug.

    Wait, actually I realize I need to look more carefully. Let me check visit_typed_expr:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        if self.function.is_none() {
            if self.can_extract_expression(expression) {
                self.function = Some(ExtractedFunction::new(ExtractedValue::Expression(
                    expression,
                )));
            }
        }
        ...
    }
    

    The check is if self.function.is_none(). So if self.function is already Some, no extraction is set. Good.

    But what if can_extract_expression is called and self.function is Some, what happens?

    Well, the if only sets self.function if it's None. Otherwise nothing happens. So my trace is correct.

    OK so my test should reproduce the user's bug. But it doesn't show the bug.

    Let me check if there's maybe a difference in the structure. Maybe the user's bug is actually about something else.

    Let me look at the issue once more. The user says the bug is that "Extract function extracts too much". The current behavior shows:

    fn prepare_project_structure(...) {
      function(target, user_id)
    }
    

    The "extracts too much" means the extracted function takes the whole body. So the extracted function's location covers the whole body.

    Hmm, but my test shows the extracted function correctly covers only the selected statements (3-6).

    Wait, what if there's a difference in the parser? What if the user's code parses differently? Let me think about how use statements work in gleam.

    Actually, let me check the entire flow. When the use statement is visited, we visit the call expression. The call expression contains the function call with arguments. One of the arguments is a Fn expression (the callback). The Fn expression contains the body.

    But wait, the Fn expression's body might have a location that includes the rest of the function. Let me check.

    Actually, when use priv <- result.try(...) is desugared, the callback fn(priv) { ... } contains ALL the subsequent statements. So the Fn expression's body might span the rest of the function.

    Hmm, but the Use statement's location is just the use line, not the callback body. So when we visit the Use statement's expression, we visit the call expression (which contains the Fn). But the Fn's location should be just the callback's body location.

    Let me verify by looking at how use statements are desugared. Actually, in the AST, the call field is the typed function call. So result.try(arg, fn(priv) { ... }). The Call's location is from result.try to the end of the last argument. The arguments are:

    • arg: application.priv_directory(...) |> result.replace_error(...) - the result
    • callback: fn(priv) { ... } - the function

    So the Call's location spans from result.try to the end of the callback's }. That means the Call's location INCLUDES the callback body. So the Call's location might extend beyond the use line.

    But wait, the Use statement's location is just the use line (according to the comment in the code). Let me check this assumption.

    Actually, looking at the comment:

    /// This is the location of the whole use line, starting from the `use`
    /// keyword and ending with the function call on the right hand side of
    /// `<-`.
    ///
    /// ```gleam
    /// use a <- result.try(result)
    /// ^^^^^^^^^^^^^^^^^^^^^^^^^^^
    /// ```
    ///
    pub location: SrcSpan,
    

    So the Use's location is from use to result.try(result). It does NOT include the callback body.

    But the Use's call expression has a location that includes the callback. Hmm.

    OK let me check the actual locations. Let me write a debug script:

  57. MiniMax Assistant

    Actually let me approach this differently. Let me write a debug helper:

  58. MiniMax Assistant

    Let me restore the original action.rs and use a different debugging approach:

  59. MiniMax Assistant

    Let me add a debug print:

  60. MiniMax Assistant

    Hmm, interesting! Only 4 statements are processed. Let me check. The statement_kinds are 0, 1, 2 (presumably Expression, Assignment, Use). Let me see what we got:

    Statement 1 (loc=71-98, kind=1=Assignment, is_use=false, is_tail=false): This should be let toml_path = "toml_path". Wait, but it's the 1st statement logged. So statement 1 in my code (use priv) is skipped, statement 2 (use _) is skipped, statement 3 (let toml_path) is logged.

    Actually wait, the order should be:

    1. use priv <- wibble("priv") - Use (kind 2)
    2. use _ <- wobble(Nil) - Use (kind 2)
    3. let toml_path = "toml_path" - Assignment (kind 1)
    4. use gleam_toml <- woo("gleam_toml") - Use (kind 2)
    5. let gleam_toml = "gleam_toml" - Assignment (kind 1)
    6. wooa(Nil) - Expression (kind 0)

    But the debug shows only 4 statements logged. So statements 1, 2 (the use statements before the selection) are skipped because can_extract_statement returns false. And statements 3, 4, 5, 6 are processed.

    Looking at the debug:

    • loc=71-98, kind=1=Assignment, is_use=false, is_tail=false. This is let toml_path = "toml_path" (statement 3).
    • loc=101-180, kind=2=Use, is_use=true, is_tail=true. This is use gleam_toml <- woo("gleam_toml") (statement 4). WAIT - is_tail=true?

    That's strange. Let me look more carefully. The last_statement_location is Some(SrcSpan { start: 101, end: 180 }) for this statement. But statement 4 should be at position around 100-160. And statement 6 is the tail.

    Wait, the locations in the debug output are:

    • loc=71-98 (statement 3: let toml_path)
    • loc=101-180 (statement 4: use gleam_toml)
    • loc=139-168 (statement 5: let gleam_toml)
    • loc=171-180 (statement 6: wooa(Nil))

    And last_stmt_loc for each:

    • For statement 3: last_stmt_loc=Some(101-180)
    • For statement 4: last_stmt_loc=Some(101-180) - SAME AS THE STATEMENT!
    • For statement 5: last_stmt_loc=Some(171-180)
    • For statement 6: last_stmt_loc=Some(171-180)

    So for statement 4, the last_stmt_loc is Some(101-180) which is the SAME as statement 4's location. So is_in_tail_position is true.

    This means statement 4 is treated as a tail position statement! And is_use=true, so position is Tail.

    But statement 4 is use gleam_toml <- woo("gleam_toml"), not the last statement. So why is last_statement_location equal to statement 4's location?

    OH I SEE! last_statement_location is set to the location of the LAST STATEMENT IN THE CURRENT BLOCK. But which block?

    visit_typed_expr_block sets last_statement_location to the location of the last statement in the block. But visit_typed_function doesn't go through visit_typed_expr_block directly.

    But wait, visit_typed_use visits the use's call expression, which is a Call. The Call has a callback argument which is a Fn expression. The Fn expression's body is the callback body.

    When the Fn expression is visited, visit_typed_expr_block IS called for the Fn's body. And it sets last_statement_location to the last statement of the Fn's body.

    So when visiting the use statement, we visit the Fn expression inside, which visits the Fn's body as a block. The block's last statement is the last statement of the callback body.

    For the use statement use gleam_toml <- woo("gleam_toml"), the callback body is everything AFTER this use. So the Fn's body is [let gleam_toml, wooa(Nil)] (the rest of the function).

    Wait, but the callback body should only contain statements up to the end of the function or until another use statement closes it.

    Let me check. When we have:

    use priv <- ...
    use _ <- ...
    let toml_path = ...
    use gleam_toml <- woo("gleam_toml")
    let gleam_toml = ...
    wooa(Nil)
    

    The use priv <- ... callback body is [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)] (all subsequent statements).

    The use _ <- ... callback body is [let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)].

    The use gleam_toml <- ... callback body is [let gleam_toml, wooa(Nil)].

    So the Fn expression inside use gleam_toml <- ... has a body of [let gleam_toml, wooa(Nil)]. The last statement is wooa(Nil).

    But the debug says last_stmt_loc=Some(101-180) for statement 4 (which is use gleam_toml). That's the location of the use statement itself, not the tail.

    Wait, let me re-check. The last_statement_location is set in visit_typed_expr_block:

    self.last_statement_location = statements.last().map(|last| last.location());
    

    So it's the location of the LAST statement in the block. For the Fn body [let gleam_toml, wooa(Nil)], the last statement is wooa(Nil). Its location should be around 171-180.

    But the debug says last_stmt_loc=Some(101-180) for statement 4 (use gleam_toml). 101-180 is the location of the use statement. That's the location of the use statement itself, not the Fn body's last statement.

    Hmm, wait. Let me re-check the locations:

    Looking at the debug output:

    • Statement 3 (let toml_path): loc=71-98
    • Statement 4 (use gleam_toml): loc=101-180. last_stmt_loc=Some(101-180)

    So last_stmt_loc is set to the location of statement 4 (use gleam_toml). That's strange.

    Hmm, wait. Maybe last_statement_location is being set to the use statement's location somehow. Let me look at visit_typed_expr:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        ...
        let last_statement_location = self.last_statement_location;
        if let TypedExpr::Fn { body, .. } = expression {
            self.last_statement_location = Some(body.last().location());
        }
        
        ast::visit::visit_typed_expr(self, expression);
        
        self.last_statement_location = last_statement_location;
    }
    

    This sets last_statement_location to the Fn's body's last statement location. But this is for the Fn expression's body, not the use statement's location.

    Hmm, but the use statement's call is a Call expression, not a Fn. The Call has the Fn as an argument. So when we visit the Call, we visit each argument. For the callback argument, we visit the Fn expression. So visit_typed_expr is called for the Fn, which sets last_statement_location to the Fn's body's last statement.

    But the Fn's body's last statement is wooa(Nil), which is at 171-180. Not 101-180.

    Wait, let me look at the body of the Fn expression more carefully. The body of the Fn callback for use gleam_toml <- ... should be [let gleam_toml, wooa(Nil)]. The last statement is wooa(Nil). Its location is 171-180.

    So last_statement_location after visiting the Fn expression should be Some(171-180), not Some(101-180).

    Hmm, but the debug shows last_stmt_loc=Some(101-180). So my understanding is wrong somewhere.

    Let me check more carefully. Maybe the Fn's body has a different structure.

    Actually, let me look at the body of the Fn expression. The Fn is created during the desugaring of use gleam_toml <- woo("gleam_toml"). The Fn takes one argument gleam_toml and returns the body which is the rest of the function.

    Wait, but the Fn's body is the rest of the function BLOCK, not just subsequent statements. Hmm, but actually the Fn body should be exactly the statements after the use.

    Actually wait. Let me think about this. When we have:

    use a <- some_thing()
    b
    c
    

    This is sugar for:

    some_thing(fn(a) { b; c })
    

    So the Fn's body is [b, c]. The Fn is a child of the Call expression.

    Now, the b and c statements here are the body of the use. They're not the body of the function. So the Fn's body has 2 statements: b and c.

    The last statement of the Fn body is c. Its location should be the location of c.

    For our case:

    use gleam_toml <- woo("gleam_toml")
    let gleam_toml = "gleam_toml"
    wooa(Nil)
    

    The Fn's body is [let gleam_toml, wooa(Nil)]. The last statement is wooa(Nil). Its location is 171-180.

    So last_statement_location should be Some(171-180).

    But the debug says last_stmt_loc=Some(101-180). That's NOT the location of wooa(Nil).

    Let me check this. Maybe the last_statement_location is not being updated correctly.

    Actually, let me look at visit_typed_expr more carefully:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        if self.function.is_none() {
            if self.can_extract_expression(expression) {
                self.function = Some(ExtractedFunction::new(ExtractedValue::Expression(
                    expression,
                )));
            }
        }
    
        let last_statement_location = self.last_statement_location;
        if let TypedExpr::Fn { body, .. } = expression {
            self.last_statement_location = Some(body.last().location());
        }
    
        ast::visit::visit_typed_expr(self, expression);
    
        self.last_statement_location = last_statement_location;
    }
    

    OK so visit_typed_expr saves the current last_statement_location, then if the expression is a Fn, sets it to the Fn's body's last statement, then visits, then restores.

    But wait, the ast::visit::visit_typed_expr would call visit_typed_expr_fn which... actually I'm not sure. Let me check:

  61. MiniMax Assistant

    OK so visit_typed_expr_fn calls visit_typed_statement for each statement in the body. But it does NOT call visit_typed_expr_block. So the last_statement_location is NOT updated to the Fn's body's last statement when we visit a Fn.

    The last_statement_location is updated in our visit_typed_expr method:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        ...
        let last_statement_location = self.last_statement_location;
        if let TypedExpr::Fn { body, .. } = expression {
            self.last_statement_location = Some(body.last().location());
        }
        
        ast::visit::visit_typed_expr(self, expression);
        
        self.last_statement_location = last_statement_location;
    }
    

    When we visit a Fn expression, this sets last_statement_location to the Fn's body's last statement. Then visits, then restores. So after visiting the Fn, last_statement_location is restored to whatever it was before.

    But within the Fn body, last_statement_location is set to the last statement of the Fn body. So statements INSIDE the Fn body are processed with last_statement_location being the last statement of the Fn body.

    Hmm, but the Fn body for use gleam_toml <- woo("gleam_toml") is [let gleam_toml, wooa(Nil)]. The last statement is wooa(Nil). So last_statement_location should be set to wooa(Nil)'s location.

    But the debug shows last_stmt_loc=Some(101-180) for statement 4 (use gleam_toml). 101-180 is the location of the use statement itself.

    Wait, maybe I'm confused. Let me look at the debug output again:

    DEBUG: statement can_extract_statement=true, loc=SrcSpan { start: 71, end: 98 }, statement_kind=Discriminant(1), last_stmt_loc=Some(SrcSpan { start: 101, end: 180 }), is_use=false, is_tail=false
    DEBUG: statement can_extract_statement=true, loc=SrcSpan { start: 101, end: 180 }, statement_kind=Discriminant(2), last_stmt_loc=Some(SrcSpan { start: 101, end: 180 }), is_use=true, is_tail=true
    DEBUG: statement can_extract_statement=true, loc=SrcSpan { start: 139, end: 168 }, statement_kind=Discriminant(1), last_stmt_loc=Some(SrcSpan { start: 171, end: 180 }), is_use=false, is_tail=false
    DEBUG: statement can_extract_statement=true, loc=SrcSpan { start: 171, end: 180 }, statement_kind=Discriminant(0), last_stmt_loc=Some(SrcSpan { start: 171, end: 180 }), is_use=false, is_tail=true
    

    Statement at loc=101-180, kind=2=Use, is_tail=true. This is the use statement with is_tail=true.

    But the last_stmt_loc is Some(101-180) for this statement. So when processing this use statement, last_statement_location is the location of THIS use statement (101-180).

    Wait wait. Let me check the debug order. The debug output is:

    1. loc=71-98, kind=1 (Assignment), is_use=false, is_tail=false, last_stmt_loc=101-180
    2. loc=101-180, kind=2 (Use), is_use=true, is_tail=true, last_stmt_loc=101-180
    3. loc=139-168, kind=1 (Assignment), is_use=false, is_tail=false, last_stmt_loc=171-180
    4. loc=171-180, kind=0 (Expression), is_use=false, is_tail=true, last_stmt_loc=171-180

    So when statement 2 (loc=101-180) is processed, last_statement_location is Some(101-180). But 101-180 is the location of statement 2 itself. So is_in_tail_position is true because the last_statement_location matches the current statement's location.

    Why is last_statement_location set to 101-180 at this point? Let me think.

    The function body is:

    1. use priv <- wibble("priv") (kind=Use, loc=?)
    2. use _ <- wobble(Nil) (kind=Use, loc=?)
    3. let toml_path = "toml_path" (kind=Assignment, loc=71-98)
    4. use gleam_toml <- woo("gleam_toml") (kind=Use, loc=101-180)
    5. let gleam_toml = "gleam_toml" (kind=Assignment, loc=139-168)
    6. wooa(Nil) (kind=Expression, loc=171-180)

    When visit_typed_function is called, last_statement_location is set to the location of the last statement in the function body, which is statement 6 (loc=171-180).

    Then visit_typed_function (default) iterates over statements and calls visit_typed_statement for each.

    For statement 1 (use priv): last_stmt_loc should be 171-180. But debug shows nothing for statement 1 because can_extract_statement returns false.

    For statement 2 (use _): same, can_extract_statement returns false.

    For statement 3 (let toml_path): can_extract_statement returns true. So debug prints. last_stmt_loc=171-180. But the debug says last_stmt_loc=Some(101-180).

    Wait, the debug shows last_stmt_loc=Some(SrcSpan { start: 101, end: 180 }) for statement 3. But 101-180 is statement 4's location (use gleam_toml). That's weird.

    Hmm, let me think about this. Maybe the Fn callback for use priv <- ... has a body that includes the rest of the function. Let me trace.

    Statement 1 (use priv):

    • visit_typed_statement is called.
    • can_extract_statement returns false. Debug is NOT printed.
    • ast::visit::visit_typed_statement is called.
    • For Use statement, visit_typed_use is called.
    • visit_typed_use calls visit_typed_expr(&use_.call).
    • The call is a Call expression: wibble("priv", fn(priv) { use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil) }).
    • visit_typed_expr is called for the Call.
    • In visit_typed_expr, the can_extract_expression is checked.
    • Then ast::visit::visit_typed_expr is called, which calls visit_typed_expr_call.
    • visit_typed_expr_call iterates over arguments and calls visit_typed_call_arg.
    • visit_typed_call_arg calls visit_typed_expr for the arg's value.
    • The arg is the Fn expression fn(priv) { use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil) }.
    • visit_typed_expr is called for the Fn.
    • In visit_typed_expr, we set last_statement_location = Some(body.last().location()). The Fn's body's last statement is wooa(Nil) (loc=171-180). So last_statement_location is set to Some(171-180).
    • Then ast::visit::visit_typed_expr is called, which calls visit_typed_expr_fn.
    • visit_typed_expr_fn iterates over body and calls visit_typed_statement for each.

    Wait, so after visiting the Fn expression, last_statement_location should be Some(171-180). But the debug shows last_stmt_loc=Some(101-180) for statement 3 (let toml_path).

    Hmm. Let me think. Maybe the Fn body doesn't include ALL the rest of the function. Let me check how use is desugared.

    Actually, in gleam, use a <- expr is sugar for expr(fn(a) { ...rest of the block... }). The callback function contains the rest of the block.

    So for:

    use priv <- wibble("priv")
    use _ <- wobble(Nil)
    let toml_path = "toml_path"
    use gleam_toml <- woo("gleam_toml")
    let gleam_toml = "gleam_toml"
    wooa(Nil)
    

    The use priv <- wibble("priv") becomes:

    wibble("priv", fn(priv) {
      use _ <- wobble(Nil)
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    })
    

    So the Fn callback for use priv contains all the subsequent statements: [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)].

    Similarly for use _, the callback contains [let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)].

    For use gleam_toml, the callback contains [let gleam_toml, wooa(Nil)].

    So when we visit use priv's call, we visit the Fn, which has body [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. The last statement is wooa(Nil) (loc=171-180).

    In visit_typed_expr for the Fn:

    if let TypedExpr::Fn { body, .. } = expression {
        self.last_statement_location = Some(body.last().location());
    }
    

    So last_statement_location is set to Some(171-180) (the location of wooa(Nil)).

    Then ast::visit::visit_typed_expr is called, which visits each statement in the Fn's body.

    For statement 2 (use _) inside the Fn body:

    • visit_typed_statement is called. can_extract_statement returns false.
    • visit_typed_use is called.
    • visit_typed_expr is called for wobble(Nil, fn(_) { let toml_path, use gleam_toml, let gleam_toml, wooa(Nil) }).
    • visit_typed_expr for the Call visits each argument.
    • The arg is the Fn for use _.
    • visit_typed_expr for the Fn sets last_statement_location to Some(171-180) (the last statement of the Fn's body).
    • Then visits the Fn body.

    Hmm, but in the Fn body for use _, the statements are [let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. After visiting, last_statement_location is restored to whatever it was before, which was set when we entered the Fn. So at the END of visiting the Fn, last_statement_location is restored to whatever it was before entering the Fn.

    So after visiting the Fn for use _, last_statement_location should be back to Some(171-180) (which was set when we entered the outer Fn for use priv).

    Then we visit let toml_path in the Fn body. At this point, last_statement_location is Some(171-180).

    is_in_tail_position: last_statement_location == statement_location? 171-180 == 71-98? No. So is_in_tail_position is false.

    So for statement 3 (let toml_path), is_tail should be false. But debug says last_stmt_loc=Some(101-180).

    Wait, let me re-read the debug output more carefully:

    DEBUG: statement can_extract_statement=true, loc=SrcSpan { start: 71, end: 98 }, statement_kind=Discriminant(1), last_stmt_loc=Some(SrcSpan { start: 101, end: 180 }), is_use=false, is_tail=false
    

    So for statement at loc=71-98 (let toml_path), last_stmt_loc=Some(101-180). That's strange because I expected last_stmt_loc=Some(171-180).

    Hmm. Let me check if the Fn body for use priv has the right last statement. Maybe body.last().location() is returning something else.

    Let me check the Fn expression's body type. It's Vec1<TypedStatement>. So body.last() returns the last statement.

    For the Fn callback for use priv, the body should be [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. The last statement is wooa(Nil).

    But body.last().location() returns 101-180, which is the location of use gleam_toml <- woo("gleam_toml"). So body.last() is use gleam_toml, not wooa(Nil).

    This is strange. Let me check if maybe the Fn's body is shorter than I think.

    Actually wait, maybe the Fn's body for use priv is NOT all subsequent statements. Let me check.

    Actually, looking at this more carefully, the Fn's body might only be the FIRST subsequent use statement's callback, not all of them.

    Let me check the typed AST. Let me write a simple script to dump it:

  62. MiniMax Assistant

    So parse_use parses the use statement. The call is the right hand side of <-. Then in the type-checker, this gets desugared.

  63. MiniMax Assistant

    AH HA! Look at this:

    // We need this to report good error messages in case there's a type error
    // in use. We consider `use` to be the last statement of a block since
    // it consumes everything that comes below it and returns a single value.
    let last_statement_location = statements
        .iter()
        .find_or_last(|statement| statement.is_use())
        .expect("safe: iter from non empty vec")
        .location();
    

    So last_statement_location is set to the location of the LAST USE statement in the callback's body. Not the last statement overall.

    For use priv <- wibble("priv"), the body is [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. The last USE statement is use gleam_toml. Its location is 101-180. So last_statement_location for the use's call is Some(101-180).

    Hmm, but this last_statement_location is stored in the CallKind::Use { ... }, which is stored in the Call expression. So when we visit the Call, we have access to this last_statement_location.

    But our visitor visit_typed_expr doesn't look at this. Let me check if there's special handling for Use's Call.

    Actually, I don't think the visitor looks at the CallKind::Use. So last_statement_location is computed differently.

    Now in visit_typed_expr:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        ...
        let last_statement_location = self.last_statement_location;
        if let TypedExpr::Fn { body, .. } = expression {
            self.last_statement_location = Some(body.last().location());
        }
        
        ast::visit::visit_typed_expr(self, expression);
        
        self.last_statement_location = last_statement_location;
    }
    

    When we visit the Fn expression (the callback), last_statement_location is set to body.last().location(). The body's last statement is wooa(Nil) (loc=171-180). So last_statement_location becomes Some(171-180).

    But the debug says last_stmt_loc=Some(101-180) for statement 3 (let toml_path).

    Wait, let me re-check. The Fn's body is [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)] for use priv. The last statement is wooa(Nil) (loc=171-180). So last_statement_location should be Some(171-180).

    But the debug says last_stmt_loc=Some(101-180) for statement 3 (let toml_path).

    Hmm. Maybe the Fn's body is different. Let me check.

    Actually, looking at the typed AST code more carefully:

    let statements = Vec1::try_from_vec(statements).expect("safe: todo added above");
    

    So the statements include following_expressions (the rest of the function body). For use priv, following_expressions is everything after the use statement.

    But wait, the following_expressions for use priv are ALL the rest of the function body. So:

    • use priv's following_expressions = [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]
    • use _'s following_expressions = [let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]
    • use gleam_toml's following_expressions = [let gleam_toml, wooa(Nil)]

    But the Fn body for use priv would have body = [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. The last statement is wooa(Nil) (loc=171-180).

    So body.last().location() = 171-180.

    But the debug shows last_stmt_loc=Some(101-180) for statement 3. So my understanding is wrong somewhere.

    Wait, maybe the Fn body is shorter. Let me actually check by examining the location of the Fn expression itself. The Fn's location is SrcSpan::new(first.start, sequence_location.end). The sequence_location is the location of the entire statement sequence (which is the function body or block).

    Hmm, let me try a different approach. Let me look at the body location directly. Let me modify the debug to print the Fn's body:

  64. MiniMax Assistant

    Let me update the debug to print Fn body location too:

  65. MiniMax Assistant

    Let me look at the other visit_typed_expr in code_action.rs (11364):

  66. MiniMax Assistant

    OK let me add debug prints more carefully. First let me look at the Fn callback body for the use statement. I need to know if the body includes all subsequent statements or just the first one.

  67. MiniMax Assistant

    OK so the structure is clear. The use's call is a function call with arguments. The body of the use callback includes:

    • The body_assignments (from let pattern = use_arg)
    • The following_expressions (subsequent statements)

    So for use priv <- wibble("priv"), the body is:

    • body_assignments: [let priv = _use1] (where _use1 is the function argument)
    • following_expressions: [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]

    So the body has 6 elements: [let priv, use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. The last statement is wooa(Nil) (loc=171-180).

    Hmm, but the debug shows last_stmt_loc=Some(101-180) for statement 3 (let toml_path). That's not 171-180.

    Wait, maybe the debug is showing the location at a different time. Let me trace more carefully.

    For statement 1 (use priv) which doesn't trigger can_extract_statement=true, but the visit still happens:

    • visit_typed_statement is called for statement 1 (use priv).
    • can_extract_statement returns false (no debug print).
    • ast::visit::visit_typed_statement is called.
    • For Use: visit_typed_use is called.
    • visit_typed_use calls visit_typed_expr(&use_.call).
    • The use's call is a Call expression. visit_typed_expr is called for the Call.
    • In visit_typed_expr, can_extract_expression is checked. If self.function is None and can_extract_expression is true, set self.function to Expression.
    • For statement 1, selection starts at let toml_path (loc=71). Call expression starts at wibble("priv") which is BEFORE the selection. So overlaps(Call_range, selected_range) is false. can_extract_expression returns false.
    • Then last_statement_location is set. For Call, it's not Fn, so no change.
    • ast::visit::visit_typed_expr is called, which calls visit_typed_expr_call.
    • visit_typed_expr_call iterates over arguments and calls visit_typed_call_arg.
    • For each argument, visit_typed_expr is called.
    • The first argument is "priv" (a string). can_extract_expression: overlaps? The string is before the selection. So no.
    • The second argument is the Fn callback for use priv. visit_typed_expr is called for this Fn.
    • In visit_typed_expr for the Fn:
      • can_extract_expression: overlaps? The Fn body includes subsequent statements, so it overlaps. completely_within? The Fn body is large (covers statements 1-6), but selected_range covers statements 3-6. The Fn body extends BEFORE selected_range. So completely_within(selected_range, expression_range) is false. Returns !false = true.
      • So self.function = Some(Expression(Fn)). The expression is the Fn for use priv.

    Hmm! So at this point, self.function is set to the Fn expression for use priv. This is the Fn body that includes ALL the subsequent statements (including the tail wooa(Nil)).

    This is a bug! The selection starts at let toml_path (statement 3), but the Fn body for use priv includes statements 1-6. So when we extract this Fn expression, we'd extract ALL the function body.

    Wait, but my test shows the use statements are preserved. So maybe this doesn't happen, or it gets overridden later.

    Let me continue tracing. After visiting the Fn expression:

    • self.function is Some(Expression(Fn)).
    • Then visit_typed_expr for the Fn: last_statement_location = self.last_statement_location; if Fn { self.last_statement_location = Some(body.last().location()); }. Body's last statement is wooa(Nil) (loc=171-180). So last_statement_location = Some(171-180).
    • Then ast::visit::visit_typed_expr is called for the Fn, which visits the Fn body.
    • For each statement in the Fn body, visit_typed_statement is called.
    • For statement 2 (use _) in the Fn body:
      • can_extract_statement: this is the use statement at loc=? . selected_range starts at let toml_path (71). The use statement is BEFORE selected_range. can_extract_statement returns false (no debug print).
      • visit_typed_use is called.
      • visit_typed_expr is called for the Call (wobble).
      • In visit_typed_expr for the Call: self.function is Some. So no change. Then visit_typed_expr_call visits arguments.
      • The second argument is the Fn callback for use _.
      • In visit_typed_expr for the Fn: self.function is Some. So can_extract_expression not checked. Then last_statement_location = body.last().location() = wooa(Nil) = 171-180.
      • Then visits the Fn body which is [let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)].

    Hmm wait, but if self.function is Some(Expression(Fn for use priv)), why is the test showing correct behavior?

    Oh! Maybe the Expression value gets overridden. Let me re-check the visit_typed_expr:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        if self.function.is_none() {
            if self.can_extract_expression(expression) {
                self.function = Some(ExtractedFunction::new(ExtractedValue::Expression(
                    expression,
                )));
            }
        }
        ...
    }
    

    The check is if self.function.is_none(). So if it's already Some, we don't override. So once we set self.function to Expression(Fn for use priv), it stays.

    Then for statement 3 (let toml_path):

    • can_extract_statement returns true. Debug prints.
    • match self.function:
      • Some(Expression(_)) => {} // do nothing
    • Then visit_typed_assignment is called.
    • visit_typed_expr for the value "toml_path". self.function is Some. So no change.
    • visit_typed_pattern for the pattern. self.function is Some.

    So self.function stays as Expression(Fn for use priv).

    After all statements, self.function is:

    • Some(Expression(Fn for use priv))

    And in code_actions:

    ExtractedValue::Expression(TypedExpr::Fn {
        type_,
        location: full_location,
        kind: FunctionLiteralKind::Anonymous { .. },
        arguments,
        body,
        ..
    }) => {
        ...
        if extracted.parameters.is_empty() {
            self.extract_anonymous_function(...)
        } else if arguments.len() == 1 {
            self.extract_anonymous_function_with_capture_hole(...)
        } else {
            self.extract_anonymous_function_body(...)
        }
    }
    

    So if self.function is Expression(Fn), we extract the anonymous function. But this is wrong because we wanted to extract multiple statements, not an anonymous function.

    Hmm wait, but the Fn expression is the callback for use priv. It's not the body of the function. Its location is from first.start (where the body starts) to sequence_location.end (where the sequence ends). The body is the subsequent statements. The arguments are the use assignments.

    Wait, let me re-read. The Fn expression has:

    • arguments: the use assignments (e.g., priv)
    • body: the subsequent statements

    So the Fn expression is fn(priv) { use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil) }. Its location spans from the start of the first statement to the end of the sequence (the entire function body).

    If we extract this Fn as a function, we'd extract all the subsequent statements. So the original function would lose all those statements. But my test shows the original function retains use priv <- wibble("priv") and use _ <- wobble(Nil).

    Hmm. Let me look at extract_anonymous_function_body:

    fn extract_anonymous_function_body(
        &mut self,
        location: SrcSpan,
        arguments: &[TypedArg],
        extra_parameters: Vec<(EcoString, Arc<Type>)>,
        return_type: Arc<Type>,
        function_end: u32,
    ) {
        let name = self.function_name();
        // ...
        let arguments = arguments
            .iter()
            .filter_map(|arg| arg.get_variable_name().map(|name| (name, &arg.type_)))
            .chain(extra_parameters.iter().map(|(name, type_)| (name, type_)))
            .collect::<Vec<(&EcoString, &Arc<Type>)>>();
    
        let call = format!(
            "{name}({})",
            arguments.iter().map(|(name, _)| name).join(", ")
        );
        self.edits.replace(location, call);
        ...
    }
    

    So self.edits.replace(location, call) replaces the code at the location with the function call. The location is the Fn expression's location.

    So the Fn expression (the entire callback for use priv) would be replaced with function(priv, ...). This means the entire body of the function would be replaced.

    But my test shows function() (no arguments). So this isn't happening.

    Hmm. Let me actually run with the debug output and see what's happening:

  68. MiniMax Assistant

    FOUND IT!

    Look at this:

    DEBUG VISIT EXPR: loc=SrcSpan { start: 71, end: 180 }, is_fn=true, self.function.is_none()=true
    DEBUG EXPR EXTRACT: loc=SrcSpan { start: 71, end: 180 }
    

    A Fn expression is being visited with location 71-180. That's a big Fn expression (from let toml_path to wooa(Nil)). And it's being EXTRACTED as an Expression!

    So the self.function is being set to Expression(Fn) where the Fn is the callback for use priv. This Fn has location 71-180.

    But wait, the test produces the correct output. So how is this getting overridden?

    Let me check more carefully. The next line shows:

    DEBUG VISIT EXPR: loc=SrcSpan { start: 87, end: 98 }, is_fn=false, self.function.is_none()=false
    

    After extracting the Fn expression, self.function.is_none() is false. So subsequent visits don't override.

    Hmm, so the Expression(Fn) should be the extraction target. But the snapshot shows the result is function() (no arguments), which suggests the Statements extraction is happening.

    Wait, let me re-look at the output. The function() call suggests the Statements extraction is happening (because extract_statements uses {name}({arguments}) which would be function() if there are no parameters).

    But Expression(Fn) should call extract_anonymous_function_* which uses fn function(...) with explicit types.

    Hmm, this is confusing. Let me look more carefully. The visit_typed_statement override:

    match &mut self.function {
        None => {
            ...
        }
        Some(ExtractedFunction { value: ExtractedValue::Expression(_), .. }) => {}
        ...
    }
    

    So if self.function is Expression(Fn), statements don't override. So self.function stays as Expression(Fn).

    But then in code_actions, the match is:

    match extracted.value {
        ...
        ExtractedValue::Expression(TypedExpr::Fn { ... }) => {
            ...
            if extracted.parameters.is_empty() {
                self.extract_anonymous_function(...)
            } else if arguments.len() == 1 {
                self.extract_anonymous_function_with_capture_hole(...)
            } else {
                self.extract_anonymous_function_body(...)
            }
        }
        ...
    }
    

    So Expression(Fn) goes to extract_anonymous_function_*. But the snapshot shows function() which is the Statements extraction.

    Let me check more carefully. Let me see the actual debug output:

  69. MiniMax Assistant

    Hmm, I see:

    • loc=71-180, is_fn=true. The Fn is visited.
    • EXPR EXTRACT: loc=71-180. This is the Fn for use priv. Its body has location 48-180.

    Wait, the Fn body is 48-180? Let me check. The Fn's body should be the subsequent statements. The first statement in the body is let priv = ... (the assignment from use). Then use _, let toml_path, etc.

    Looking at the locations:

    • 48-180 = the Fn body for use priv
    • 71-180 = the Fn body for use _ (or similar)

    Actually wait, the Fn callback for use _ should have body [let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. The first statement is let toml_path at position 71. The last statement is wooa(Nil) at position 171-180. So the body is 71-180.

    But the Fn callback for use priv has body [let priv, use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. The first statement is let priv at position 48. The last statement is wooa(Nil) at position 171-180. So the body is 48-180.

    So:

    • The first Fn visited (loc=48-180) is the callback for use priv.
    • The second Fn visited (loc=71-180) is the callback for use _.

    The DEBUG EXPR EXTRACT happens for the second Fn (loc=71-180). This is the callback for use _.

    Wait but this is the Expression extraction. Why is the Statements extraction happening?

    Let me look at visit_typed_statement more carefully. After the Expression is set, the next statement use _ is visited:

    • can_extract_statement returns false for use _ (no debug print).

    Wait, but the Expression was set when visiting the Fn for use _. The Fn is the callback for use _. The Fn is an ARGUMENT to the Call. So when we visit the Use's call (which is a Call), we visit its arguments, one of which is the Fn.

    So the order is:

    • Visit use priv:
      • visit_typed_use -> visit_typed_expr(call)
        • visit_typed_expr(Call)
          • visit Call args (string, Fn for use priv)
            • visit Fn for use priv
              • can_extract_expression(Fn) -> ??? let me check.
              • The Fn body is 48-180. selected_range is 71-? end. selected_range is from let toml_path to end of wooa(Nil). So selected_range is 71-180. The Fn body is 48-180. completely_within(selected_range, Fn_body_range) means selected_range is strictly inside Fn_body. selected_range.start (71) > Fn_body.start (48) and selected_range.end (180) < Fn_body.end (180). The last condition fails because they're equal. So completely_within returns false. So can_extract_expression returns !false = true. So self.function = Expression(Fn for use priv).
            • But the debug shows VISIT EXPR loc=48-180 with is_fn=true. And EXPR EXTRACT log is at loc=71-180.

    Wait, let me re-check the debug output:

    DEBUG VISIT EXPR: loc=SrcSpan { start: 48, end: 180 }, is_fn=true, self.function.is_none()=true
    DEBUG FN BODY LAST: loc=SrcSpan { start: 48, end: 180 }
    

    The Fn at 48-180 (callback for use priv) is visited. self.function.is_none()=true. can_extract_expression is checked. But EXPR EXTRACT log doesn't appear for this. Why?

    Hmm, let me check can_extract_expression for Fn:

    • TypedExpr::Fn matches the catch-all !completely_within(selected_range, expression_range).

    selected_range is 71-180. expression_range is 48-180. completely_within(71-180, 48-180):

    • selected_range.start (71) > 48? Yes.
    • selected_range.start (71) < 180? Yes.
    • selected_range.end (180) > 48? Yes.
    • selected_range.end (180) < 180? No.
    • Returns false.

    So can_extract_expression returns !false = true. So self.function should be set to Expression(Fn for use priv).

    But the debug doesn't show EXPR EXTRACT for this Fn. Let me look at the debug output again:

    DEBUG VISIT EXPR: loc=SrcSpan { start: 48, end: 180 }, is_fn=true, self.function.is_none()=true
    DEBUG FN BODY LAST: loc=SrcSpan { start: 48, end: 180 }
    DEBUG VISIT EXPR: loc=SrcSpan { start: 48, end: 180 }, is_fn=false, self.function.is_none()=true
    

    Wait, there's a "VISIT EXPR" with the same location 48-180 but is_fn=false. That's odd. Let me think.

    Actually, I bet the Fn is a child of another Call expression. Let me see. The Fn for use priv is the second argument to wibble("priv", fn(priv) { ... }). So when we visit the Call, we visit each argument. For the Fn argument, we visit the Fn expression.

    In visit_typed_expr for the Fn:

    • is_fn=true
    • can_extract_expression checked.

    Then we visit the Fn body (via ast::visit::visit_typed_expr -> visit_typed_expr_fn -> visit_typed_statement for each statement).

    Wait, but the debug shows "DEBUG VISIT EXPR: loc=48-180, is_fn=false". Maybe this is a different visit. Let me look at the structure.

    Actually, I wonder if the Fn expression has a location that includes the body. So when we visit the Fn, we visit its body. The body has its own location? Or the body's first statement has a location?

    Actually, looking at the code:

    let callback = UntypedExpr::Fn {
        arguments: assignments.function_arguments,
        location: SrcSpan::new(first.start, sequence_location.end),
        end_of_head_byte_index: sequence_location.end,
        return_annotation: None,
        kind: FunctionLiteralKind::Use {
            location: use_.location,
        },
        body: statements,
    };
    

    So the Fn's location is SrcSpan::new(first.start, sequence_location.end). For use priv, first.start is the start of the first statement in the body (which is let priv = _use1). And sequence_location.end is the end of the entire function body.

    So the Fn's location is 48-180 (from let priv to end of function).

    And the Fn's body is [let priv, use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. The body has its own structure.

    When we visit the Fn, we visit the body via visit_typed_expr_fn. visit_typed_expr_fn iterates over body statements and calls visit_typed_statement.

    But wait, before visiting the body, in our visit_typed_expr we set last_statement_location = Some(body.last().location()). Then visit. Then restore.

    OK so the order of visits:

    1. Visit use priv -> visit use priv's call (Call) -> visit Call args -> visit Fn for use priv (loc=48-180)
      • In visit_typed_expr for Fn:
        • can_extract_expression: completely_within(71-180, 48-180) = false. So can_extract returns true.
        • self.function = Expression(Fn for use priv).
      • Then visit Fn body.
      • For each statement in body, visit_typed_statement.

    But the debug doesn't show EXPR EXTRACT for loc=48-180. So something else is happening.

    Let me look at the debug output very carefully:

    DEBUG VISIT EXPR: loc=SrcSpan { start: 19, end: 180 }, is_fn=false, self.function.is_none()=true
    DEBUG VISIT EXPR: loc=SrcSpan { start: 31, end: 37 }, is_fn=false, self.function.is_none()=true
    DEBUG VISIT EXPR: loc=SrcSpan { start: 38, end: 44 }, is_fn=false, self.function.is_none()=true
    DEBUG VISIT EXPR: loc=SrcSpan { start: 48, end: 180 }, is_fn=true, self.function.is_none()=true
    DEBUG FN BODY LAST: loc=SrcSpan { start: 48, end: 180 }
    DEBUG VISIT EXPR: loc=SrcSpan { start: 48, end: 180 }, is_fn=false, self.function.is_none()=true
    

    Hmm, there are two VISIT EXPR for loc=48-180. One with is_fn=true and one with is_fn=false.

    Maybe the first one is for the Fn expression itself (is_fn=true). The second one is for the Fn body's location (is_fn=false)? Or maybe a Call argument?

    Wait, the Fn body has its own location? Or is it that the Fn expression itself has a location 48-180, but the body is being visited and produces another expression?

    Actually, looking at the AST, the Fn expression has a location and a body. The body's location is determined by the statements.

    Let me check the structure. Maybe the Fn is wrapped in something else.

    Actually, I think the Fn is an argument to the Call. When we visit the Call, we iterate over arguments and visit each. For the Fn argument, we visit_typed_call_arg which calls visit_typed_expr(arg.value).

    Wait, but the Fn argument's location is 48-180. So when we visit it as a TypedExpr, it's a Fn.

    Hmm, let me check visit_typed_call_arg:

    pub fn visit_typed_call_arg<'a, V>(v: &mut V, arg: &'a TypedCallArg)
    where
        V: Visit<'a> + ?Sized,
    {
        v.visit_typed_expr(&arg.value);
    }
    

    So it just visits the value. For our Fn argument, it visits the Fn expression.

    OK let me trace the visits more carefully:

    1. visit_typed_function(main):
      • Sets last_statement_location = 171-180 (location of wooa(Nil)).
      • For each statement in body:
        • visit_typed_statement
          • For statement 1 (use priv):
            • can_extract_statement returns false (no debug).
            • ast::visit::visit_typed_statement -> visit_typed_use
              • visit_typed_expr(use_.call) // Call expression
                • DEBUG VISIT EXPR: loc=19-180, is_fn=false (the whole use call expression, not just the RHS)
                • Actually wait, what's loc=19-180?

    Hmm, let me check. The use priv's call is a Call expression. The Call's location is from wibble to the end of the callback's }. The callback for use priv is the entire function body. So the Call's location spans from wibble (around 19) to the end of the function (180).

    So loc=19-180 is the Call for wibble("priv", fn(priv) { ... }). The Call is visited as a TypedExpr.

    Then visit_typed_expr_call iterates over arguments:

    • Argument 1: "priv" (loc=31-37)
    • Argument 2: Fn (loc=48-180)

    For argument 1, visit_typed_call_arg -> visit_typed_expr("priv"). DEBUG VISIT EXPR: loc=31-37.

    For argument 2, visit_typed_call_arg -> visit_typed_expr(Fn). DEBUG VISIT EXPR: loc=48-180, is_fn=true.

    OK so the Fn is the callback for use priv. Its location is 48-180.

    Now, in visit_typed_expr for this Fn:

    • can_extract_expression is checked. Let me verify by computing.

    Selected range: from let toml_path to end of wooa(Nil). So selected range = 71-? Let me check the actual positions.

    Actually wait, let me look at the test code:

    pub fn main() {
      use priv <- wibble("priv")
      use _ <- wobble(Nil)
      let toml_path = "toml_path"
      use gleam_toml <- woo("gleam_toml")
      let gleam_toml = "gleam_toml"
      wooa(Nil)
    }
    

    Position counting from after \n:

    • \n = 0
    • pub fn main() { = 0-15
    • \n use priv <- wibble("priv") = 16-46
    • \n use _ <- wobble(Nil) = 47-71
    • \n let toml_path = "toml_path" = 72-105
    • etc.

    Hmm, my counting is off. Let me just look at the positions in the debug:

    • 19-180: This is use priv <- wibble("priv") to end of function.
    • 31-37: This is "priv".
    • 38-44: Hmm, what is this? wibble( maybe? No, 38-44 is something inside wibble.
    • 48-180: Fn for use priv, body starts at 48 (which is let priv = _use1) to 180.

    Wait, let me look at the positions more carefully. The test code has \n at the start (because of the r#"..."# literal). Then the first line is empty, then pub fn main() {, etc.

    Actually looking at the snapshot file:

    "\npub fn main() {\n  use priv <- wibble(\"priv\")\n  use _ <- wobble(Nil)\n  let toml_path = \"toml_path\"\n  use gleam_toml <- woo(\"gleam_toml\")\n  let gleam_toml = \"gleam_toml\"\n  wooa(Nil)\n}\n\nfn wibble..."
    

    So the test code has:

    • \n at position 0
    • pub fn main() { at position 1-15 (or 1-16 if including {)
    • \n at 16
    • use priv <- wibble("priv") at 17-45
    • \n at 46
    • use _ <- wobble(Nil) at 47-69
    • \n at 70
    • let toml_path = "toml_path" at 71-102
    • \n at 103
    • etc.

    Hmm, the exact positions don't matter much. Let me focus on the logic.

    The Fn callback for use priv has location 48-180. That's the entire function body (starting from the first statement after the use, which is let priv = _use1 or similar).

    The Fn callback for use _ has location 71-180. That's from let toml_path to end of function.

    The selected range is from start of let toml_path to end of wooa(Nil). So selected range = 71-? Let me check.

    Looking at the debug: "let toml_path" is at loc=71-98 (a single assignment). The selection ends after wooa(Nil). So selected range should be 71 to ~180.

    OK so:

    • selected range = 71-180
    • Fn for use priv = 48-180

    For Fn for use priv:

    • can_extract_expression:
      • overlaps(48-180, 71-180): yes
      • Fn matches the catch-all !completely_within(71-180, 48-180)
      • completely_within(71-180, 48-180):
        • 71 > 48? Yes
        • 71 < 180? Yes
        • 180 > 48? Yes
        • 180 < 180? No
      • completely_within returns false.
      • Returns !false = true.
      • So self.function = Expression(Fn for use priv).

    But the debug doesn't show EXPR EXTRACT for loc=48-180. It only shows it for loc=71-180.

    Hmm, let me check more carefully. Maybe the can_extract_expression for the Fn returns false for some reason.

    Actually wait, let me re-check can_extract_expression:

    match expression {
        TypedExpr::Pipeline { ... } => {
            ...
        }
        
        TypedExpr::Int { .. } | ... | TypedExpr::Fn { .. } | ... => !completely_within(selected_range, expression_range),
    }
    

    So for Fn, it returns !completely_within(selected_range, expression_range). Let me check the parameters.

    can_extract_expression(&self, expression: &TypedExpr):

    • expression_range = self.edits.src_span_to_lsp_range(expression.location());
    • selected_range = self.params.range;

    So expression_range is the LSP range of the expression. selected_range is the LSP range of the selection.

    For Fn for use priv:

    • expression.location() = 48-180
    • src_span_to_lsp_range converts to LSP Position.

    Let me check src_span_to_lsp_range:

    pub fn src_span_to_lsp_range(location: SrcSpan, line_numbers: &LineNumbers) -> Range {
        let start = line_numbers.line_and_column_number(location.start);
        let end = line_numbers.line_and_column_number(location.end);
        Range::new(
            Position::new(start.line - 1, start.column - 1),
            Position::new(end.line - 1, end.column - 1),
        )
    }
    

    So it converts to LSP positions. For Fn for use priv (loc=48-180), the LSP range is some Range.

    For selected_range, it depends on the LSP positions of let toml_path start and wooa(Nil) end.

    Now completely_within(a, b):

    pub fn completely_within(a: Range, b: Range) -> bool {
        a.start > b.start && a.start < b.end && a.end > b.start && a.end < b.end
    }
    

    Wait, this is strict inequality. a.start > b.start and a.start < b.end etc. So if a.end == b.end, this returns false.

    Hmm so for completely_within(selected_range, expression_range) where selected_range = 71-180 and expression_range = 48-180:

    • selected_range.start > expression_range.start (71 > 48)? Yes
    • selected_range.start < expression_range.end (71 < 180)? Yes
    • selected_range.end > expression_range.start (180 > 48)? Yes
    • selected_range.end < expression_range.end (180 < 180)? No
    • Returns false.

    So can_extract_expression returns true. So self.function = Expression(Fn for use priv).

    But the debug shows that this doesn't happen. The EXPR EXTRACT log only appears for loc=71-180.

    Let me think. Maybe the order of visits is different. Let me re-trace.

    Actually, the DEBUG VISIT EXPR for loc=19-180 is the Call for wibble("priv", fn(priv) { ... }). Then the args are visited: "priv" (31-37) and Fn (48-180).

    For the Fn (48-180):

    • DEBUG VISIT EXPR: loc=48-180, is_fn=true
    • can_extract_expression checked
    • DEBUG FN BODY LAST: loc=48-180 (body.last().location())
    • ast::visit::visit_typed_expr -> visit_typed_expr_fn -> visit body statements

    Wait, but the debug shows TWO VISIT EXPR for loc=48-180. One with is_fn=true and one with is_fn=false. Let me see what's happening.

    Actually, I think the debug is showing nested calls. Let me look at the Fn body more carefully.

    The Fn body for use priv is [let priv, use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]. When visit_typed_expr_fn is called, it visits each statement.

    For statement 1 (let priv), visit_typed_statement is called.

    • can_extract_statement: let priv location vs selected_range. selected_range is 71-180. let priv is at 48-something. No overlap. Returns false.
    • visit_typed_assignment -> visit_typed_expr(value), visit_typed_pattern.

    The value of let priv = _use1 is _use1 (a Var). visit_typed_expr for _use1. DEBUG VISIT EXPR: loc=48-50 (or similar) - but I don't see this in the debug.

    Hmm wait, actually the value of let priv = _use1 is a Var. Its location is 48-something. Let me see if there's a matching DEBUG VISIT EXPR.

    Actually, looking at the debug, after "DEBUG FN BODY LAST: loc=48-180", the next line is "DEBUG VISIT EXPR: loc=48-180, is_fn=false". But that doesn't match a Var visit. Hmm.

    Wait, maybe I'm confused. Let me re-trace.

    Actually, the issue is that the Fn body has its own location? Or maybe the Fn is being visited in a different way?

    Let me check by running with verbose debug:

  70. MiniMax Assistant

    AH HA! Now I can see clearly:

    DEBUG VISIT EXPR: loc=SrcSpan { start: 48, end: 180 }, type=Fn, self.function.is_none()=true
    DEBUG can_extract_expression=false for loc=SrcSpan { start: 48, end: 180 } type=Fn
    DEBUG FN BODY LAST: loc=SrcSpan { start: 48, end: 180 }, body_len=1
    

    For the Fn at loc=48-180 (callback for use priv), can_extract_expression is FALSE. And the body has only 1 statement.

    But for:

    DEBUG VISIT EXPR: loc=SrcSpan { start: 71, end: 180 }, type=Fn, self.function.is_none()=true
    DEBUG can_extract_expression=true for loc=SrcSpan { start: 71, end: 180 } type=Fn
    DEBUG FN BODY LAST: loc=SrcSpan { start: 101, end: 180 }, body_len=2
    

    The Fn at loc=71-180 (callback for use _) can_extract_expression is TRUE. And the body has 2 statements (loc=101-180 is the last, which is use gleam_toml).

    Wait, but body_len=1 for the first Fn and body_len=2 for the second Fn. That's weird. The first Fn's body should be 6 statements (let priv, use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)).

    Oh wait, I see. The Fn for use priv has body_len=1. So the body is just one statement. But which statement? Let me think.

    Actually, looking at the type inference code:

    let statements = assignments.body_assignments;
    
    if following_expressions.is_empty() {
        let todo = Statement::Expression(UntypedExpr::Todo { ... });
        statements.push(todo);
    } else {
        statements.append(&mut following_expressions);
    }
    
    let statements = Vec1::try_from_vec(statements).expect("safe: todo added above");
    

    So the body includes body_assignments + following_expressions. body_assignments is the use assignment let pattern = _use1. So body = [let pattern, ...following_expressions].

    But wait, the Fn body is the Fn's body, not the Use's body. The Use is the wrapper around the Fn. Let me re-check.

    Actually, the Use statement has:

    • call: the Call expression
    • The Call has arguments. The callback (Fn) is one of the arguments.

    The Fn's body is the callback body. The body includes:

    • body_assignments (the use assignments: let pattern = _use1)
    • following_expressions (the rest of the function body)

    But for the Fn for use priv, the body should have:

    • [let priv = _use1, use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)]

    That's 6 elements. But the debug shows body_len=1. That's strange.

    Wait, maybe the body_len is wrong. Let me re-check.

    Actually, the debug shows body_len=1. So the Fn body has only 1 statement.

    Hmm, maybe the Fn body is just the Fn's literal body, not the use's callback body. Let me check.

    Wait, looking at the Fn construction:

    let callback = UntypedExpr::Fn {
        arguments: assignments.function_arguments,
        location: SrcSpan::new(first.start, sequence_location.end),
        end_of_head_byte_index: sequence_location.end,
        return_annotation: None,
        kind: FunctionLiteralKind::Use { location: use_.location },
        body: statements,
    };
    

    body: statements is the full body including body_assignments and following_expressions.

    But the debug shows body_len=1 for the first Fn. Let me check if maybe the Fn's body is just the first statement after the use.

    Hmm, actually let me look at the body field in TypedExpr::Fn:

  71. MiniMax Assistant

    OK so TypedExpr::Fn has a body of Vec1<TypedStatement>. So body_len is the length of the Vec1.

    For the Fn for use priv, body_len=1. So the body has 1 statement. That's weird.

    Let me look more carefully. Maybe the body only contains the body_assignments, not the following_expressions.

    Wait, maybe the body assignments are converted to the function arguments, not to statements in the body. Let me check:

  72. MiniMax Assistant

    OK so for simple patterns like Variable, only function_arguments are added, not body_assignments. So for use priv <- ..., the body_assignments is empty.

    Then the body of the Fn callback is just the following_expressions (subsequent statements).

    For use priv: following_expressions = [use _, let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)] = 5 statements. For use _: following_expressions = [let toml_path, use gleam_toml, let gleam_toml, wooa(Nil)] = 4 statements. For use gleam_toml: following_expressions = [let gleam_toml, wooa(Nil)] = 2 statements.

    But the debug shows body_len=1 for the first Fn (use priv). That's wrong.

    Wait, maybe the body_len I'm logging is wrong. Let me re-check. I log body.len(). For Vec1, .len() returns the length. So it should be 5 for use priv's Fn body.

    But the debug shows 1. So something is off.

    Actually, maybe Vec1 stores things differently. Let me check:

  73. MiniMax Assistant

    Let me restore the code and investigate further:

  74. MiniMax Assistant

    Let me look at the typed AST to understand the body of the Fn callback for use.

  75. MiniMax Assistant

    Let me actually verify what's in the Fn body by writing a small standalone test:

  76. MiniMax Assistant

    Let me take a different approach. Let me check what's happening with the Fn body in the typed AST:

  77. MiniMax Assistant

    Let me run the test with debug:

  78. MiniMax Assistant

    Let me add more debug to see what's happening at code_actions time:

  79. MiniMax Assistant

    Let me run the test with this debug output:

  80. MiniMax Assistant

    Let me check the order of ExtractedValue variants:

  81. MiniMax Assistant

    Let me check git log for any recent fixes related to this:

  82. MiniMax Assistant

    Let me check if there's a v1.16 tag:

  83. MiniMax Assistant

    Let me check the CHANGELOG.md for v1.17 fixes:

  84. MiniMax Assistant

    OK so there was a recent fix related to extracting a function from within an anonymous function. Let me look at this commit:

  85. MiniMax Assistant

    Let me check the code before the recent fix:

  86. MiniMax Assistant

    Let me search for visit_typed_expr in the previous version of the file:

  87. MiniMax Assistant

    Let me look at the visit_typed_expr in the previous version (v1.16.0):

  88. MiniMax Assistant

    me write a test that more closely matches the user's scenario with parameters from outside:

  89. MiniMax Assistant

    Let me write a test that matches the user's bug scenario more closely:

  90. MiniMax Assistant

    Let me run this test:

  91. MiniMax Assistant

    Let me update my test to use user_id like the user's code:

  92. MiniMax Assistant

    Let me write a more accurate test that matches the user's bug:

  93. MiniMax Assistant

    Let me run this

  94. MiniMax Assistant

    Let me check if the bug exists in v1.16.0:

  95. MiniMax Assistant

    Let me check the v1.16.0 version of the visit_typed_expr:

  96. MiniMax Assistant

    me look at v1.16.0 visit_typed_expr:

  97. MiniMax Assistant

    Let me search for the ExtractFunction's visit_typed_expr:

  98. MiniMax Assistant

    me search for the ExtractFunction struct:

  99. MiniMax Assistant

    Let me find the ExtractFunction in v1.16:

  100. MiniMax Assistant

    Let me look at the ExtractFunction in v1.16:

  101. MiniMax Assistant

    me update my test to use selected_range.end AFTER the ):

  102. MiniMax Assistant

    me write a test with selection end AFTER the ):

  103. MiniMax Assistant

    Let me run this

  104. MiniMax Assistant

    I've reproduced the bug. Now I understand the issue. The bug is in can_extract_expression - when the selection is inside a Use statement's Call expression (which covers the entire function body), the current check !completely_within returns true, so the entire Call expression (and thus the entire function body) is extracted.

    Let me clean up the test file first and then implement the fix:

  105. MiniMax Assistant

    Now let me look at the exact code I need to modify:

  106. MiniMax Assistant

    Now let me implement the fix. I need to modify can_extract_expression to use the correct check:

  107. MiniMax Assistant

    Let me try a different way to find the line

  108. MiniMax Assistant

    me first run all extract_function tests to confirm they pass currently:

  109. MiniMax Assistant

    All tests pass. Now let me implement the fix:

  110. MiniMax Assistant

    Let me now use edit to modify the line:

  111. MiniMax Assistant

    Let me use the edit command to modify the line

  112. MiniMax Assistant

    Let me use sed to update this line:

  113. MiniMax Assistant

    Good. Now let me verify the change:

  114. MiniMax Assistant

    me create the test that reproduces the user's bug, then run all the extract function tests to see if my fix works:

  115. MiniMax Assistant

    Let me run the test:

  116. MiniMax Assistant

    verify the fix is in place and check what's happening:

  117. MiniMax Assistant

    The fix didn't work. Let me check what the issue is. Let me re-add the debug to trace what's happening:

  118. MiniMax Assistant

    Let me re-add the debug prints to trace what's happening:

  119. MiniMax Assistant

    Let me run the test with debug:

  120. MiniMax Assistant

    Let me add more debug to see what's happening with the Use case:

  121. MiniMax Assistant

    I see the issue now. The Use statement's location is being set to use_.call.location(), which is the entire function body (because the call includes the callback). This causes subsequent statements to appear "inside" the Use. Let me look more carefully at this:

  122. MiniMax Assistant

    Let me add debug to print the Use's location:

  123. MiniMax Assistant

    Now I can see clearly:

    • stmt_loc (statement.location()) = 91-271 (the entire function)
    • use_loc (use_.location) = 91-117 (just the use line use priv <- wibble("priv"))
    • call_loc (use_.call.location()) = 91-271 (the entire function)

    So Statement::location() for Use returns 91-271, but use_.location is 91-117.

    Hmm, so Statement::location() for Use is NOT use_.location. Let me check the impl again:

    pub fn location(&self) -> SrcSpan {
        match self {
            Statement::Expression(expression) => expression.location(),
            Statement::Assignment(assignment) => assignment.location,
            Statement::Use(use_) => use_.location,
            Statement::Assert(assert) => assert.location,
        }
    }
    

    For Use, it returns use_.location. But use_.location is 91-117, not 91-271. So statement.location() should return 91-117.

    But the debug shows stmt_loc = 91-271. So either the impl is different in this version, or the debug is wrong.

    Let me re-check. Actually, looking at the impl more carefully... oh wait, maybe there's a different impl for the typed Use.

    Hmm, let me look at the actual code more carefully

  124. MiniMax Assistant

    Let me check the existing test snapshot for extract_use_in_tail_position:

  125. MiniMax Assistant

    Let me check the existing test snapshots to ensure my fix doesn't break them:

  126. MiniMax Assistant

    Let me check where Statement::location() is used to understand the impact of the change:

  127. MiniMax Assistant

    Now I understand the issue clearly. The fix is to use use_.location (just the use line) instead of use_.call.location() (the entire call including callback body). Let me apply this fix:

  128. MiniMax Assistant

    me look at how the use's location is used elsewhere:

  129. MiniMax Assistant

    let me apply the fix. The fix needs to be in can_extract_statement for Use statements to use the use line location (not the entire block):

  130. MiniMax Assistant

    Now let me modify the can_extract_statement for Use to use the use line location:

  131. MiniMax Assistant

    Now let me run my test to see if the fix works:

  132. MiniMax Assistant

    The fix is working. The output matches the user's expected behavior. Now let me run all the extract function tests to make sure I haven't broken anything:

  133. MiniMax Assistant

    All 22 existing tests pass. The only failure is my new test (which doesn't have a snapshot). Let me create the snapshot:

  134. MiniMax Assistant

    Now let me run all the tests to make sure I haven't broken anything:

  135. MiniMax Assistant

    One test is failing. Let me look at it:

  136. MiniMax Assistant

    Let me look at the failing test to understand the issue:

  137. MiniMax Assistant

    Let me revise the fix. The check should be position_within(use_line.start, selected_range):

  138. MiniMax Assistant

    All 1538 tests pass! Let me also run the other compiler tests to make sure nothing else is broken:

  139. MiniMax Assistant

    Let me check if these failures are related to my changes:

  140. MiniMax Assistant

    These failures are pre-existing and not related to my changes. Let me restore my fix:

  141. MiniMax Assistant

    Let me clean up the test files. First, let me check what's in the action.rs file:

  142. MiniMax Assistant

    Let me verify what tests are in the action.rs file:

  143. MiniMax Assistant

    , only my proper test is in the file. Let me clean up the .new snapshot files and the unused test-commands snapshots:

  144. MiniMax Assistant

    Let me check the CHANGELOG to see if I should add an entry:

  145. MiniMax Assistant

    Let me add a CHANGELOG entry for this bug fix:

  146. MiniMax Assistant

    Now let me check the final state of all my changes:

  147. MiniMax Assistant

    run all the language-server tests one more time to verify everything passes:

  148. MiniMax Assistant

    Let me verify my test snapshot is correct:

  149. MiniMax Assistant

    me verify all the changes look good:

  150. MiniMax Assistant

    Let me check the new snapshot file:

  151. MiniMax Assistant

    Let me check if any existing tests are affected by my changes. Let me look at tests that involve expressions that are partially selected:

  152. MiniMax Assistant

    All 1538 tests pass. Let me also verify by running all tests:

  153. MiniMax Assistant

    Let me check if these are pre-existing:

  154. MiniMax Assistant

    The test-output failures are pre-existing and not related to my changes. Let me run all the relevant tests for my changes:

  155. MiniMax Assistant

    All tests pass (96 + 3890 + 1538 = 5524 tests). Let me also verify the specific test that was concerning:

  156. MiniMax Assistant

    Let me run my new test:

  157. MiniMax Assistant

    Let me verify by temporarily reverting the can_extract_expression fix to confirm both fixes are needed:

  158. MiniMax Assistant

    Confirmed, both fixes are needed. Let me re-apply the can_extract_expression fix:

  159. MiniMax Assistant

    Let me run all tests one more time to ensure everything works:

  160. MiniMax Assistant

    All 5524 tests pass. Let me check the final state of all my changes:

  161. MiniMax Assistant

    Let me check the new snapshot:

  162. MiniMax Assistant

    Let me run the related tests once more to ensure everything works correctly:

  163. MiniMax Assistant

    All 180 extract-related tests pass. Let me also do a final check by running all tests:

  164. MiniMax Assistant

    Let me check the final state:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.