Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-sonnet-5· anthropicHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Extract function extracts too much When triggering Extract function…

  1. User

    ISSUE DESCRIPTION

    Extract function extracts too much When triggering Extract function with the selection:

    /// prepare an empty gleam project in the `target_path`
    ///
    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
    
      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <-------------------------------------------------------------- selected from here
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    
      use gleam_toml <- result.try(
        toml_path
        |> simplifile.read
        |> result.replace_error(FailedToReadGleamToml),
      )
    
      let gleam_toml =
        gleam_toml
        |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
      // <---------------------------------------------------------------- to here
    }
    

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      function(target, user_id)
    }
    

    instead of the expected:

    /// prepare an empty gleam project in the `target_path`
    ///
    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    
    fn function(
      target: TargetPath,
      user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    
      use gleam_toml <- result.try(
        toml_path
        |> simplifile.read
        |> result.replace_error(FailedToReadGleamToml),
      )
    
      let gleam_toml =
        gleam_toml
        |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
    }
    

    Using gleam 1.16.0 in neovim nightly

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /gleam, current file: none) bash-$

  2. Claude Assistant

    Let me fix my test to define local functions rather than relying on stdlib try.

  3. Claude Assistant

    Now let's set these persistently and run the test.

  4. Claude Assistant

    Leftover from old test needs removal.

  5. Claude Assistant

    Good, cleaned up. Let's verify the whole test function looks correct now.

  6. Claude Assistant

    Now let's run the test.

  7. Claude Assistant

    Good, already imported. Now let's implement the fix.

  8. Claude Assistant

    Now let's rebuild and rerun our reproduction tests.

  9. Claude Assistant

    Good, Assert isn't affected. Now let's implement the fix for can_extract_statement.

  10. Claude Assistant

    Now let's rebuild and test.

  11. Claude Assistant

    Now let's rewrite the whole function properly.

  12. Claude Assistant

    Now let's remove the earlier debug print in visit_typed_statement.

  13. Claude Assistant

    Now let's rebuild and rerun the reproduction test.

  14. Claude Assistant

    Now check if CallArg is imported in this file.

  15. Claude Assistant

    Good, already imported. Now let's remove the debug prints and rebuild/test.

  16. Claude Assistant

    Now let's rebuild and test again.

  17. Claude Assistant

    Now let's rebuild and test.

  18. Claude Assistant

    The overshoot scenario now works correctly, exactly matching the "expected" output from the original issue report (only the intended section extracted, correct return type, proper Result type retained). Now let's clean up the debug test additions, remove the temporary test functions, and run the FULL existing test suite for code_action/action.rs to check for regressions.

  19. Claude Assistant

    Let's revert this test file completely and remove the stray snapshot files, since these were just for reproduction purposes.

  20. Claude Assistant

    Good, now only the actual fix remains. Let's review the full diff of our fix.

  21. Claude Assistant

    All 881 existing tests pass. Now let's run the entire language-server test suite to be safe.

  22. Claude Assistant

    All 1537 tests pass. Let's also run the full workspace test suite to double-check nothing else broke (compiler-core, compiler-cli, etc.), focusing on relevant crates.

  23. Claude Assistant

    Whole workspace builds cleanly. Now let's add a proper regression test to the test suite matching the reported issue (this is allowed, since instructions say not to modify existing tests but a new test to cover the fix is reasonable and expected practice; let's add one reflecting the exact reported scenario).

  24. Claude Assistant

    Good — only the source fix remains, no test modifications. Let's also update the CHANGELOG as is customary in this repo for bug fixes.

  25. Claude Assistant

    Let's add an entry describing this fix, following the existing style.

  26. Claude Assistant

    Now let's do a final review of the diff and run the full test suite one more time to be sure.

  27. Claude Assistant

    All 1537 tests still pass. Let's also run the compiler-core test suite to check nothing else was impacted, plus a broader workspace check just to be safe.

  28. Claude Assistant

    Everything passes. Let's do a final look at the complete diff to make sure the code is clean and well-documented.

  29. Claude Assistant

    Let's temporarily revert just code_action.rs to test original behavior for this edge case, keeping the test file change.

  30. Claude Assistant

    Confirmed: this is pre-existing behavior (extracting a use statement inherently pulls in everything after it, since that's semantically required), not a regression from my fix. Let's restore my fix.

  31. Claude Assistant

    Now let's remove the temporary test from action.rs and its stray snapshot file.

  32. Claude Assistant

    Good. Let's run the full test suite one final time to confirm everything is clean.

  33. Claude Assistant

    All 1537 tests pass with the fix in place, and no test files were modified. Let's do one last sanity check of the full diff before submitting.

  34. Claude Assistant

    The workspace builds cleanly and all tests pass. Now let me go through the checklist.

  35. Claude Assistant

    This looks complete and well-documented. Let me go through the checklist:

    Checklist review:

    • Reproduced the reported error: Yes — I built a faithful reproduction of the issue's scenario (nested use expressions in a function, selecting from a mid-function statement to the final statement, with the selection extending slightly past the last statement's real end — e.g. via a trailing comment, which is exactly what happens with typical editor selections like neovim's line-based visual selection). I confirmed this triggered the exact bug described: the whole function body got extracted instead of just the selected portion.

    • Confirmed the fix resolves the error: Yes — after the fix, the same reproduction produces exactly the expected output from the issue (only the selected statements are extracted, the two leading use blocks remain untouched, and the extracted function retains the correct return type).

    • Thought about edge cases: Yes — I checked: (1) the exact-selection (non-overshoot) case still works correctly, (2) selecting only a lone use statement (which inherently must pull in its continuation, verified this is pre-existing/expected behavior, not something my fix changes), (3) a general non-use overshoot scenario (simple block extraction) to confirm the bug is specific to use desugaring and not a wider issue, (4) pipelines as tail statements in multi-statement extractions.

    • Ran existing tests: Yes — all 1537 language-server tests pass, all 3890 compiler-core tests pass, and the full workspace builds cleanly with no regressions. No test files were modified or added (verified via git status).

  36. Claude Assistant

    Everything is clean. Let's submit.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.