Skip to content
TheChatArchiveThe Chat Archive
MiniMaxminimax/minimax-m3· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Respect backups for OpenCode and Crush generated files Review run…

  1. User

    ISSUE DESCRIPTION

    Respect backups for OpenCode and Crush generated files Review run finding.

    OpenCode and Crush implement custom apply logic that does not fully honour the backup argument. Existing generated instruction/config files can be overwritten without .bak files, despite apply bookkeeping adding backup paths when backups are enabled.

    Impact: user-owned AGENTS.md, CRUSH.md, or .crush.json content can be overwritten without the normal Ruler restoration path.

    Evidence:

    • src/agents/OpenCodeAgent.ts omits the backup parameter for instructions writes.
    • src/agents/CrushAgent.ts writes CRUSH.md and .crush.json directly.

    Expected fix:

    • Accept backup = true in these agent implementations.
    • Resolve paths against projectRoot, create parent directories, and call backupFile before writes.
    • Add tests for backup enabled/disabled behaviour.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /ruler, current file: none) bash-$

  2. MiniMax Assistant

    Let me start by exploring the repository structure to understand what we're working with.

  3. MiniMax Assistant

    Let me look at the AbstractAgent.ts to understand the pattern of how agents use backupFile:

  4. MiniMax Assistant

    Let me look at existing tests to understand the patterns:

  5. MiniMax Assistant

    Now let me check the existing backup-option.test.ts to understandthe conventions for backup tests:

  6. MiniMax Assistant

    Now let me look at the AgentBackupForwarding.test.ts to understand the pattern for theagent-level tests:

  7. MiniMax Assistant

    Let me look at the test harness to understand setupTestProject:

  8. MiniMax Assistant

    Let me also check the GeminiCliAgent.ts to see what an already-working agent with custom applyRulerConfig looks like:

  9. MiniMax Assistant

    Let me check how OpenCode and Crush propagate in the apply-engine.ts and revert.ts:

  10. MiniMax Assistant

    Now I understand the entire structure. Let me also check the AbstractAgent test to confirm patterns:

  11. MiniMax Assistant

    Let me look at the apply-engine.ts file to understand how the apply function uses backup:

  12. MiniMax Assistant

    Let me also check RooCodeAgent.ts to understand the patterns for an agent with multiple files:

  13. MiniMax Assistant

    Let me also check the AmazonQCliAgent.ts as another example:

  14. MiniMax Assistant

    Now let me look at the related test file to confirm:

  15. MiniMax Assistant

    Now let me check the existing build:

  16. MiniMax Assistant

    Let me reproduce the issue first by creating a test script:

  17. MiniMax Assistant

    I've reproduced the issue. The .bak files are not created for AGENTS.md (OpenCode's instructions), CRUSH.md, and .crush.json. Now let me look at the existing tests for OpenCodeAgent more carefully to understand the patterns:

  18. MiniMax Assistant

    Now I have enough understanding. Let me now fix the OpenCodeAgent.ts:

  19. MiniMax Assistant

    Now let me fix the CrushAgent.ts:

  20. MiniMax Assistant

    Let me build to ensure no compile errors:

  21. MiniMax Assistant

    The fix works. Now let me verify with --no-backup flag:

  22. MiniMax Assistant

    Both --backup and --no-backup work correctly now. Let me run the existing tests:

  23. MiniMax Assistant

    Let me check what tests are failing in OpenCodeAgent.test.ts:

  24. MiniMax Assistant

    The tests are failing because writeGeneratedFile uses 'fs/promises' which the test mocks. Let me check this issue:

  25. MiniMax Assistant

    Let me check the AmazonQCliAgent test to see how the mock works there:

  26. MiniMax Assistant

    Let me run a simple debug to understand the mock:

  27. MiniMax Assistant

    Let me check if the mock actually applies when writeGeneratedFile is used. Looking at AmazonQCliAgent which also uses writeGeneratedFile:

  28. MiniMax Assistant

    Let me look at the dist to understand if there's some compilation issue:

  29. MiniMax Assistant

    I see! The dist uses require("fs") not require("fs/promises"). So even though the source uses import { promises as fs } from 'fs';, when compiled, it becomes const fs_1 = require("fs"); and then fs_1.promises.writeFile(...). The jest.mock('fs/promises') mock doesn't intercept require('fs') calls.

    But wait - I'm looking at the test. The tests use import * as fs from 'fs/promises';. Let me check the Jest config to see how it'sset up:

  30. MiniMax Assistant

    Let me check the test more carefully - it uses fs/promises:

  31. MiniMax Assistant

    Let me check if the tests pass for old behavior, by reverting my changes temporarily:

  32. MiniMax Assistant

    Let me check how the existing test approach works in AgentBackupForwarding.test.ts:

  33. MiniMax Assistant

    Let me check the WindsurfAgent.test.ts:

  34. MiniMax Assistant

    Now let me understand - the existing OpenCodeAgent tests will fail. Let me verify they were designed for the previous behavior. The issue is the tests use jest.mock('fs/promises') but the agent now uses FileSystemUtils helpers. According to the instructions, I shouldn't modify existing tests but they can break. Let me create a new test file for the backup behavior. First, let me check the existing AgentBackupForwarding.test.ts once more to understand its setup:

  35. MiniMax Assistant

    Let me check if my code is correct by examining the actual node_modules path Jest uses for fs/promises:

  36. MiniMax Assistant

    Let me check the CrushAgent tests:

  37. MiniMax Assistant

    The CrushAgent tests use real fs, so they should still work. Let me run the CrushAgent tests:

  38. MiniMax Assistant

    The CrushAgent tests pass. Now I need to handle OpenCodeAgent tests. Let me revise OpenCodeAgent to use fs.writeFile directly so the existing tests still work:

  39. MiniMax Assistant

    Let me also verify the CrushAgent still works:

  40. MiniMax Assistant

    Let me verify the fix still works correctly:

  41. MiniMax Assistant

    Now let me run all the unit agent tests to make sure nothing else broke:

  42. MiniMax Assistant

    All 362 agent tests pass. Let me run all tests:

  43. MiniMax Assistant

    Let me check if this failing test is related to my changes:

  44. MiniMax Assistant

    Good - that test failure is pre-existing and not related to my fix. Let me create new tests for the backup behavior:

  45. MiniMax Assistant

    Let me fix the property naming issue:

  46. MiniMax Assistant

    The issue is that when rulerMcpJson is null, the OpenCodeAgent returns early before writing the MCP file. This is by design (the engine handles opencode.json MCP separately). Let me adjust the test to pass a non-null rulerMcpJson:

  47. MiniMax Assistant

    All new tests pass. Let me run the full test suite to verify nothing else broke:

  48. MiniMax Assistant

    The only failing test is the pre-existing failure that was already failing before my changes. Let me run the backup-related tests:

  49. MiniMax Assistant

    Let me also look at the existing mcp-backup-prevention.test.ts to see how backup integration is tested:

  50. MiniMax Assistant

    Let me also create an integration test for the OpenCode and Crush backup behavior through the full apply flow:

  51. MiniMax Assistant

    Let me also extend the integration tests by creating a new file. First let me check the integration test patterns:

  52. MiniMax Assistant

    Let me run all the tests once more to confirm everything works:

  53. MiniMax Assistant

    Let me run the OpenCode integration test to make sure nothing broke:

  54. MiniMax Assistant

    Let me look at my final agent files to verify everything is correct:

  55. MiniMax Assistant

    Let me also check the existing tests pass (besides the pre-existing skills propagation failure):

  56. MiniMax Assistant

    Let me see the full diff of changes:

  57. MiniMax Assistant

    Let me also verify the new test file:

  58. MiniMax Assistant

    Let me run the lint check:

  59. MiniMax Assistant

    Let me also run the e2e tests:

  60. MiniMax Assistant

    All e2e tests pass too. Let me run the full test suite to verify:

  61. MiniMax Assistant

    Let me confirm the failure is pre-existing:

  62. MiniMax Assistant

    Let me clean up the temporary test scripts:

  63. MiniMax Assistant

    Let me do a final verification of my changes:

  64. MiniMax Assistant

    Let me verify the final dist build:

  65. MiniMax Assistant

    Let me run a comprehensive check of all the related tests one more time:

  66. MiniMax Assistant

    All 50 related tests pass. Let me run a final lint and format check:

  67. MiniMax Assistant

    Let me also verify the final git status:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.