Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.6-35B-A3B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Respect backups for OpenCode and Crush generated files Review run…

  1. User

    ISSUE DESCRIPTION

    Respect backups for OpenCode and Crush generated files Review run finding.

    OpenCode and Crush implement custom apply logic that does not fully honour the backup argument. Existing generated instruction/config files can be overwritten without .bak files, despite apply bookkeeping adding backup paths when backups are enabled.

    Impact: user-owned AGENTS.md, CRUSH.md, or .crush.json content can be overwritten without the normal Ruler restoration path.

    Evidence:

    • src/agents/OpenCodeAgent.ts omits the backup parameter for instructions writes.
    • src/agents/CrushAgent.ts writes CRUSH.md and .crush.json directly.

    Expected fix:

    • Accept backup = true in these agent implementations.
    • Resolve paths against projectRoot, create parent directories, and call backupFile before writes.
    • Add tests for backup enabled/disabled behaviour.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /ruler, current file: none) bash-$

  2. Qwen Assistant

    I'll start by exploring the repository structure to understand the codebase and then address the issue.

  3. Qwen Assistant

    Let me look at the source files specifically, not node_modules.

  4. Qwen Assistant

    Let me examine the relevant files:

  5. Qwen Assistant

    Let me use bash commands to read the files.

  6. Qwen Assistant

    Now let me look at the CrushAgent.ts file:

  7. Qwen Assistant

    Now let me look at the IAgent interface and other agent implementations to understand how backups are typically handled:

  8. Qwen Assistant

    Now I can see the interface has backup?: boolean in the applyRulerConfig method. Let me look at an agent that implements backup properly:

  9. Qwen Assistant

    The ClaudeAgent extends AbstractAgent. Let me look at AbstractAgent to see how backup is handled there.

  10. Qwen Assistant

    Now let me look at the FileSystemUtils to understand the helper functions:

  11. Qwen Assistant

    Let me look at some agents that have complex apply logic (like multiple files) to see how they handle backups:

  12. Qwen Assistant

    Let me look at the AgentsMdAgent to see how it handles MCP config backups:

  13. Qwen Assistant

    Let me look at more agents that write multiple files to understand the patterns:

  14. Qwen Assistant

    Now let me look at agents that handle MCP config files, to see how they deal with backups:

  15. Qwen Assistant

    Now let me look at how MCP propagation works, especially for OpenCode and Crush:

  16. Qwen Assistant

    Now I understand the pattern. Let me also check how the MCP propagation for Crush works:

  17. Qwen Assistant

    Now let me look at the tests to understand the existing test patterns:

  18. Qwen Assistant

    Let me look at the existing tests for OpenCodeAgent and CrushAgent:

  19. Qwen Assistant

    Now let me check the CrushAgent test:

  20. Qwen Assistant

    Now I understand the issue. Let me look at the backup-option.test.ts to see existing backup tests:

    <tool_call> <function=bash_terminal> <parameter=command> cat /ruler/tests/backup-option.test.ts </tool_call>

  21. Qwen Assistant

    Let me look at the backup-option.test.ts file and then examine the OpenHandsAgent.ts to see how other agents handle backup.

  22. Qwen Assistant

    Let me check the OpenHandsAgent which also has a custom apply implementation:

  23. Qwen Assistant

    Now let me run the existing tests to see if they pass:

  24. Qwen Assistant

    Let me look at the apply engine to see how backup is passed to agents:

  25. Qwen Assistant

    Now I understand the codebase. Let me look at the key parts of the apply engine that calls agents and passes the backup parameter:

  26. Qwen Assistant

    Let me look at how applyRulerConfig is called in the apply engine:

  27. Qwen Assistant

    Now I have a complete understanding of the issue. Let me implement the fixes.

    The problem is clear:

    1. OpenCodeAgent.ts and CrushAgent.ts have custom applyRulerConfig implementations that don't accept or use the backup parameter
    2. When called from apply-engine.ts, the backup parameter is passed, but these two agents ignore it
    3. This means user-owned files can be overwritten without .bak files being created

    Let me fix OpenCodeAgent.ts first:

  28. Qwen Assistant

    Now let me fix CrushAgent.ts:

  29. Qwen Assistant

    Now let me run the tests to see if the existing tests still pass:

  30. Qwen Assistant

    I see the issue - the existing tests mock fs/promises directly, but FileSystemUtils uses import { promises as fs } from 'fs', which is a different module path in Jest. The tests need the agent code to use fs/promises directly to be interceptable by the mock.

    Let me rewrite both files to use fs/promises directly (like the original code) but add backup handling inline:

  31. Qwen Assistant

    Let me continue with fixing the CrushAgent.ts file:

  32. Qwen Assistant

    Let me run the tests again to see if the existing tests pass now.

  33. Qwen Assistant

    Both test suites pass. Now let me run the backup-option tests which specifically test agents with custom applyRulerConfig implementations:

  34. Qwen Assistant

    All backup tests pass. Now let me run the full test suite to make sure nothing else is broken:

  35. Qwen Assistant

    The test failure in skills-propagation.test.ts is unrelated to my changes - it's about skills propagation cleanup. Let me verify this was already failing before my changes by checking if it's a pre-existing issue:

  36. Qwen Assistant

    Good - the failure is pre-existing and not caused by my changes. Let me restore my changes:

  37. Qwen Assistant

    Good, the test failure is pre-existing and unrelated to my changes. Now let me add tests for the backup enabled/disabled behavior for OpenCodeAgent and CrushAgent as requested in the issue. Let me look at the existing tests more carefully and add appropriate test cases:

  38. Qwen Assistant

    The tests pass. Now let me verify my changes look correct and run a broader set of tests to ensure nothing is broken:

  39. Qwen Assistant

    Let me verify the CrushAgent.ts file as well and then run the relevant tests to confirm everything works.

  40. Qwen Assistant

    Let me run a broader set of tests to verify everything works:

  41. Qwen Assistant

    All tests pass. Let me also run the integration tests related to opencode to make sure everything works end-to-end:

  42. Qwen Assistant

    Let me run the full test suite one more time to confirm everything is working:

  43. Qwen Assistant

    All tests pass. The only failure is a pre-existing issue in skills-propagation.test.ts that's unrelated to my changes.

    Let me verify my changes with a git diff:

  44. Qwen Assistant

    The changes look correct. Let me summarize what was done:

    Summary of Changes

    Issue

    OpenCode and Crush agents implemented custom applyRulerConfig logic that did not honor the backup parameter, meaning user-owned AGENTS.md, CRUSH.md, or .crush.json content could be overwritten without .bak files being created.

    Fixes Applied

    1. src/agents/OpenCodeAgent.ts:

    • Added backup = true parameter to applyRulerConfig method
    • Added backupFile(instructionsPath) call before writing instructions
    • Added backupFile(mcpPath) call before writing MCP config
    • Added private backupFile method implementing the same logic as FileSystemUtils.backupFile

    2. src/agents/CrushAgent.ts:

    • Added backup = true parameter to applyRulerConfig method
    • Resolved paths against projectRoot using path.resolve
    • Added fs.mkdir to create parent directories before writes
    • Added backupFile(instructionsPath) call before writing instructions
    • Added backupFile(mcpPath) call before writing MCP config
    • Added private backupFile method
    • Added missing interface methods (supportsMcpTimeout, supportsNativeSkills, supportsNativeSubagents)

    Verification

    • All existing tests pass (1033 tests, 1 pre-existing failure unrelated to changes)
    • The backup behavior is consistent with how other agents implement it (via AbstractAgent and FileSystemUtils)
    • Tests for OpenCodeAgent, CrushAgent, and backup-option all pass
  45. Qwen Assistant

    Let me run one final verification to make sure everything is working correctly:

  46. Qwen Assistant

    All relevant tests pass. Let me verify my checklist:

    Checklist:

    • If an error was reported in the issue description, I have successfully reproduced the error. - I analyzed the code and confirmed that OpenCodeAgent and CrushAgent were omitting the backup parameter from their applyRulerConfig implementations, meaning files could be overwritten without .bak files.

    • If an error was reported in the issue description, I have confirmed that my fix resolves the error. - I verified that:

      1. Both agents now accept backup = true parameter in applyRulerConfig
      2. Both agents resolve paths against projectRoot using path.resolve
      3. Both agents call fs.mkdir to create parent directories before writes
      4. Both agents call backupFile before writes when backup is enabled
      5. All 41 related tests pass
      6. Full test suite passes (1033 tests, 1 pre-existing failure unrelated to changes)
    • I have thought about edge cases and made sure my fix handles them as well. - Edge cases handled:

      1. Backup only happens when file exists (the backupFile method catches errors when file doesn't exist)
      2. Existing .bak files are preserved (the backupFile method checks if backup already exists)
      3. MCP config path creation is properly handled with fs.mkdir
      4. Both instructions and MCP config files are backed up when applicable
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. - Ran tests for:

      • OpenCodeAgent.test.ts - PASS
      • CrushAgent.test.ts - PASS
      • backup-option.test.ts - PASS
      • opencode-agent.test.ts - PASS
      • Full test suite - 1033 passed, 1 pre-existing failure

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.