Skip to content
TheChatArchiveThe Chat Archive
MiniMaxminimax/minimax-m3· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Extract function extracts too much When triggering Extract function…

  1. User

    ISSUE DESCRIPTION

    Extract function extracts too much When triggering Extract function with the selection:

    /// prepare an empty gleam project in the `target_path`
    ///
    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
    
      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <-------------------------------------------------------------- selected from here
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    
      use gleam_toml <- result.try(
        toml_path
        |> simplifile.read
        |> result.replace_error(FailedToReadGleamToml),
      )
    
      let gleam_toml =
        gleam_toml
        |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
      // <---------------------------------------------------------------- to here
    }
    

    It will extract the entire function content into a new function leaving:

    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      function(target, user_id)
    }
    

    instead of the expected:

    /// prepare an empty gleam project in the `target_path`
    ///
    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
      // replace $PROJECT_NAME placeholder in the gleam.toml
      function(target, user_id)
    }
    
    fn function(
      target: TargetPath,
      user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    
      use gleam_toml <- result.try(
        toml_path
        |> simplifile.read
        |> result.replace_error(FailedToReadGleamToml),
      )
    
      let gleam_toml =
        gleam_toml
        |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
    }
    

    Using gleam 1.16.0 in neovim nightly

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /gleam, current file: none) bash-$

  2. MiniMax Assistant

    Let me start by exploring the repository structure to understand the codebase.

  3. MiniMax Assistant

    This is the Gleam compiler repository. Let me explore the structure of the language-server directory since that's where the LSP code refactoring likely lives.

  4. MiniMax Assistant

    Let me look at the ExtractFunction implementation in code_action.rs.

  5. MiniMax Assistant

    Let me look at the can_extract_statement function and related helpers:

  6. MiniMax Assistant

    Now let me look at the helper functions completely_within, within, overlaps, and position_within:

  7. MiniMax Assistant

    Let me understand what's happening with the test case by looking at the existing tests:

  8. MiniMax Assistant

    Let me look at the existing tests for extract function from statements:

  9. MiniMax Assistant

    Now let me try to reproduce the issue. First, let me write a test script that mimics the failing scenario:

  10. MiniMax Assistant

    Let me check the use AST statement structure:

  11. MiniMax Assistant

    A use statement's location() is use_.location.merge(&use_.call.location()). Since use_.location is the entire use line (e.g., use priv <- ) and use_.call.location() is just the call expression, the merge would actually include just up to the end of the call. So if use priv <- result.try(application.priv_directory("gleeps") |> result.replace_error(FailedToFindPrivDirectory)), then statement.location() includes from use priv <- to the end of ) - which is the entire use line.

    OK so for the first use priv <- result.try(...) statement at the start, its statement.location() is from the use keyword to the end of the call ). So:

    • can_extract_statement returns false (because the user selection doesn't overlap with this location).

    Now let me trace through. Actually I wonder if the bug is in the wrapping logic when an implicit body. Let me check what happens with the visitor when an implicit body exists.

    Actually wait, in the issue, the function has 3 use statements, but the body isn't explicitly written. The desugared form of a use statement without an explicit body would essentially add a callback. Let me check the actual typed AST.

    Actually, in Gleam, use priv <- result.try(application.priv_directory("gleeps") |> result.replace_error(FailedToFindPrivDirectory)) followed by more statements desugars to:

    result.try(
      application.priv_directory("gleeps") |> result.replace_error(FailedToFindPrivDirectory),
      fn(priv) {
        // rest of the block
      }
    )
    

    So the typed AST has call = the desugared call expression including the callback function.

    So when the visitor visits visit_typed_use(use_), it would visit:

    • use_.call - this is the desugared expression
    • use_.call would be a TypedExpr::Call which would visit the call's arguments, including the callback function (anonymous function with fn(priv) { ... rest of block ... })

    Now, when we visit the callback function, visit_typed_expr is called, then visit_typed_expr_fn, etc.

    Wait, here's a thought. The issue might be with how the visitor handles use statements. The visitor visits the use's call first, which includes the callback function with the remaining block as its body. Then for each use statement, the visitor visits the call (which includes the inner block through the callback).

    When the inner block is visited, the visitor visits each statement in the inner block again. So each statement is visited multiple times.

    But the visitor does check if self.function.is_none() before doing anything in visit_typed_expr. And it checks the statement_location in visit_typed_statement. So it should be OK...

    Hmm wait, let me think again. Looking at the code in visit_typed_statement:

    fn visit_typed_statement(&mut self, statement: &'ast TypedStatement) {
        let statement_location = statement.location();
    
        if self.can_extract_statement(statement) {
            ...
            match &mut self.function {
                None => {
                    self.function = match statement {
                        TypedStatement::Expression(TypedExpr::Pipeline { .. }) => None,
                        TypedStatement::Assert(_)
                        | TypedStatement::Assignment(_)
                        | TypedStatement::Expression(_) => {
                            Some(ExtractedFunction::new(ExtractedValue::Statements {
                                location: statement_location,
                                position,
                            }))
                        }
                        TypedStatement::Use(use_) => {
                            Some(ExtractedFunction::new(ExtractedValue::Use {
                                location: use_.call.location(),
                                type_: statement.type_(),
                            }))
                        }
                    }
                }
                ...
            }
        }
        ast::visit::visit_typed_statement(self, statement);
    }
    

    OK, so when we encounter the first use statement that overlaps with the selection (which is use gleam_toml <- result.try(...) in our case), can_extract_statement returns true (since it does overlap), and self.function is None, so we set self.function = Some(ExtractedFunction::new(ExtractedValue::Use { location: use_.call.location(), ... })).

    Note that location here is use_.call.location() which is just result.try(toml_path |> simplifile.read |> result.replace_error(FailedToReadGleamToml)) - the call expression.

    But the statement_location (which is use_.location.merge(&use_.call.location()) for a use statement) is the entire use gleam_toml <- result.try(...) statement.

    Now when we visit the next statement let gleam_toml = ...:

    • can_extract_statement returns true
    • self.function is Some(...)
    • We fall into the match arms:
      • Some(ExtractedFunction { value: ExtractedValue::Use { location, .. }, .. }) if location.contains_span(statement_location) => {} - this checks if the use's call location contains the statement_location. Since the use call is BEFORE the let statement, this is false.
      • So we fall into: Some(ExtractedFunction { value: value @ ExtractedValue::Use { .. }, .. }) => { *value = ExtractedValue::Statements { location: value.location().merge(&statement_location), position, }; }
      • This converts to Statements and merges locations. The merged location is use_.call.location().merge(&statement_location) = from start of result.try(...) to end of let gleam_toml = .... So the merged location is the use call AND the let statement, NOT the entire use line.

    Wait, let me think. Let's say we have:

    use gleam_toml <- result.try(...)    <- position A (start of use line) to D (end of call)
    let gleam_toml = ...                  <- position D to E (end of let statement)
    

    The use_.call.location() is from result.try(...) start to ) end. So let's say it's B to D.

    statement_location for let gleam_toml = ... is D to E.

    value.location() is B to D.

    Merging gives us B to E - which is from result.try to the end of let gleam_toml. Missing the use gleam_toml <- part.

    Hmm, but actually, in subsequent merges, we just extend. So the next statements simplifile.write(...) location is merged in too.

    Let me see:

    • After processing let toml_path = ... only: location = let toml_path range
    • After processing use gleam_toml <- ...: Sets to Use, location = use's call location (e.g., B-D)
    • After processing let gleam_toml = ...: Sets to Statements, location = B-D merged with D-E = B-E
    • After processing simplifile.write(...): Extends location to include end of that statement.

    So the location should be from B (start of use call) to end of simplifile.write(...). But that misses the use gleam_toml <- part of the use statement!

    Wait, but after ast::visit::visit_typed_statement(self, statement), the visitor still descends into the statement's children. So when we visit let gleam_toml = ..., we also visit its inner value expression, which is the pipeline. And in that pipeline, we visit the user_id_to_string(user_id) and other expressions. Could visit_typed_expr somehow set self.function to include the entire function?

    Hmm, let me look at visit_typed_expr again:

    fn visit_typed_expr(&mut self, expression: &'ast TypedExpr) {
        // If we have already determined what code we want to extract, we don't
        // want to extract this instead. This expression would be inside the
        // piece of code we already are going to extract, leading to us
        // extracting just a single literal in any selection, which is of course
        // not desired.
        if self.function.is_none() {
            ...
        }
        ...
    }
    

    So visit_typed_expr won't change self.function if it's already set. So that's not the issue.

    Wait, but I notice that the visitor visits the use's call expression which includes the implicit callback function. The callback function's body is the inner block, which contains all the remaining statements. So when we descend into the use's call, we visit the callback function, which visits the body, which visits each statement again!

    And each of these statements could go through the same logic. But since self.function is already set, only the merge-to-statements logic should kick in...

    Hmm wait, let me check whether the visitor visits the use's call separately from the body. Let me look at the visit_typed_use implementation:

  12. MiniMax Assistant

    Let me set up the project first and reproduce the issue:

  13. MiniMax Assistant

    Interesting! The extract_use_with_some_statements_before test extracts from the start of the function to the end. Let me look at the test that triggers it:

  14. MiniMax Assistant

    Let me check the tests directory more carefully and look at how to write a new test:

  15. MiniMax Assistant

    Now let me set up a quick test to reproduce the issue. First, let me create a temporary test file:

  16. MiniMax Assistant

    Let me first try to compile the code action tests to see if anything is broken already:

  17. MiniMax Assistant

    Now let me create a temporary test to reproduce the issue:

  18. MiniMax Assistant

    Let me write a temporary test file to reproduce the issue using the existing test infrastructure. First, let me look at what TestProject::for_source does:

  19. MiniMax Assistant

    Let me think about this issue more carefully by tracing the code execution:

  20. MiniMax Assistant

    Let me look at the contains_span method to understand better. And also how the last_statement_location is set up for visit_typed_expr_block.

    Let me run the existing test to verify it's working correctly. First, I need to confirm my understanding of the behavior.

    Looking at the issue more carefully - the function looks like:

    fn prepare_project_structure(
      target_path target: TargetPath,
      user_id user_id: uuid.Uuid,
    ) -> Result(Nil, SubmitError) {
      // get the priv dir
      use priv <- result.try(
        application.priv_directory("gleeps")
        |> result.replace_error(FailedToFindPrivDirectory),
      )
    
      // copy the base project to the target_path
      use _ <- result.try(
        simplifile.copy_directory(filepath.join(priv, "base_project"), target.path)
        |> result.replace_error(FailedToCopyBaseProject),
      )
    
      // replace $PROJECT_NAME placeholder in the gleam.toml
      // <-------------------------------------------------------------- selected from here
      let toml_path =
        target.path
        |> filepath.join("gleam.toml")
    
      use gleam_toml <- result.try(
        toml_path
        |> simplifile.read
        |> result.replace_error(FailedToReadGleamToml),
      )
    
      let gleam_toml =
        gleam_toml
        |> string.replace("$PROJECT_NAME", with: user_id_to_string(user_id))
    
      simplifile.write(toml_path, gleam_toml)
      |> result.replace_error(FailedToWriteGleamToml)
      // <---------------------------------------------------------------- to here
    }
    

    Selection: from start of let toml_path to end of the whole function body (the closing } is OUTSIDE the selection, so the function body itself is included but the closing brace isn't).

    When extracting, the entire body of the original function (including the use priv <- ... and use _ <- ...) is extracted.

    Let me trace through the visit:

    1. visit_typed_function is called.

      • last_statement_location = last statement's location (the simplifile.write(...) statement).
      • function_end_position = function end position.
    2. visit_typed_expr_block is called for the function's body.

      • last_statement_location = last statement's location again.
    3. Each statement in the block is visited:

      • use priv <- ...:
        • can_extract_statement: statement location is use priv <- result.try(...). It doesn't overlap with selection (selection starts at let toml_path). Returns false.
        • ast::visit descends into statement's children.
        • For a Use statement, visit_typed_use visits use_.call, which is the desugared result.try(..., fn(priv) { ... rest of block ... }).
        • Visiting result.try(...) calls visit_typed_call, which visits the arguments: the call arg is the value, the last call arg is the anonymous function fn(priv) { ... rest ... }.
        • Visiting the anonymous function calls visit_typed_expr first, then descends into the body.
          • visit_typed_expr for the Fn: self.function.is_none() so it could check can_extract_expression. The Fn's range covers the whole body which DOES overlap with selection. But can_extract_expression for Fn checks the Fn's location, which would be too large (the whole block). Actually it's just the function literal location, not the body. Let me check.

    Hmm wait, what about visit_typed_expr_var? It registers referenced variables. So when we visit the callback function's parameters (which are pattern matches), those would visit pattern variables.

    Let me check what variables are visible in the body block. The pattern variables like priv and _ would be defined inside the use's callback function. They have a definition_location inside the callback.

    When the user code references priv later in simplifile.copy_directory(filepath.join(priv, "base_project"), target.path), would that be tracked?

    Wait wait. The use statements at the top use priv and _. These are bound by the use statement. So priv is defined within the callback function. Let me check this more carefully.

    Actually, since use statements wrap the remaining block in a callback, the variable priv is bound by the callback. So the use statement's callback defines priv.

    When we visit the callback function's body, the body's variable priv is defined in the callback. The body's other use statements (use _ <- ...) again wrap the remaining statements in another callback. So priv from the outer callback is captured by the inner callback.

    This means the use statements form a chain of nested callbacks, each one having the remaining statements as its body.

    OK so let me trace through more carefully:

    1. The outer block has 5 statements.
    2. visit_typed_expr_block visits these 5 statements in order.
    3. For each use statement, it descends into the use's call which contains the callback, which visits the inner block. The inner block has the remaining statements.

    So when we visit use priv <- ...:

    • Its statement location doesn't overlap with selection. can_extract_statement returns false.
    • We descend into visit_typed_use(use_) which calls visit_typed_expr(&use_.call).
    • The call is TypedExpr::Call (or maybe a pipeline?). Let's say it's a call: result.try(value, fn(priv) { ... }).
    • visit_typed_expr checks if self.function.is_none(). If so, it checks can_extract_expression on the call.
    • can_extract_expression for a Call: the call's range is from result.try to the end of the closing paren. That includes the callback function. So the call's range would be from result.try to } (end of callback). Does this overlap with selection?

    The selection starts at let toml_path, which is AFTER the call result.try(...) (which ends at ) of FailedToFindPrivDirectory)). So the call's range doesn't overlap with the selection. can_extract_expression returns false.

    • Then we descend into the call's children. The arguments include the anonymous function fn(priv) { ... }.
    • Visiting the anonymous function: visit_typed_expr checks can_extract_expression for the Fn. The Fn's range is from fn to } of the function literal. This also doesn't overlap with selection (assuming the callback is right after result.try(...) with no significant content between them).

    Hmm wait, the callback for a use without explicit body extends to the end of the function. So the callback's range is from the fn(priv) { after result.try(...) to the closing } of the function. So the callback body would include let toml_path etc.

    So the Fn's range DOES overlap with selection. Let me check can_extract_expression for Fn.

  21. MiniMax Assistant

    Let me write a temporary test to actually reproduce the issue. I'll create a small standalone script that exercises the code:

  22. MiniMax Assistant

    Let me look at the existing test setup and add a temporary test to verify the issue:

  23. MiniMax Assistant

    Let me look at the test framework to understand find_position_of and select_until:

  24. MiniMax Assistant

    Now let me create a temporary test in a separate file that I'll delete before submission. First, let me look at the structure of the test module:

  25. MiniMax Assistant

    Now I'll add a temporary test file. Let me first quickly try a different approach - I'll write a temporary test in a brand new file:

  26. MiniMax Assistant

    Let me look at the visit function for Fn expressions specifically:

  27. MiniMax Assistant

    Let me search for how a use statement's call is constructed:

  28. MiniMax Assistant

    Let me find what use_.right_hand_side_location is:

  29. MiniMax Assistant

    Let me look at how infer_call uses the location:

  30. MiniMax Assistant

    Let me find how the use extraction works:

  31. MiniMax Assistant

    Let me check how FunctionLiteralKind works to see if we can detect implicit bodies:

  32. MiniMax Assistant

    Let me check how the typed use is constructed:

  33. MiniMax Assistant

    OK so:

    • Statement::Use(Use { ..., location: use_.location, ... })

    So the typed use has location: use_.location, which is the untyped use's location, which is from 'use' to ')' of the source use line.

    But use_.call (the typed call) has its location extended to sequence_location.end.

    So:

    • use_.location = from use keyword to ) of the call in source. This is the use LINE (e.g., use priv <- result.try(...)).
    • use_.right_hand_side_location = from result.try( to ). Just the call expression.
    • use_.call.location() = from use to end of sequence_location. Extended.

    OK so the issue is using use_.call.location() which is too large.

    Let me think about the fix. We want to capture the use's source code (just the use line, not the implicit body). So we want use_.location.

    But the comment in statement.location():

    Statement::Use(use_) => use_.location.merge(&use_.call.location()),
    

    Merges use_.location and use_.call.location(). Since use_.call.location() extends to end of function, this merge is essentially use_.call.location(). So statement.location() for use is essentially the whole function.

    Hmm. The reason for the merge was probably to handle cases where the use line has a call that spans multiple lines (like in the bug report). The use_.location ends at the end of the multi-line call's ). But just use_.location should be sufficient for capturing the use line.

    Wait, let me re-check. use_.location is from use keyword to the closing ) of the call. That's the whole use line.

    But use_.location.merge(&use_.call.location()) includes the implicit body (since use_.call.location() extends to end of function).

    So statement.location() extends to end of function.

    The fix in visit_typed_statement:

    TypedStatement::Use(use_) => {
        Some(ExtractedFunction::new(ExtractedValue::Use {
            location: use_.call.location(),   // <-- bug
            type_: statement.type_(),
        }))
    }
    

    We should use use_.location instead of use_.call.location(). This way the location only spans the use line, not the implicit body.

    But wait, let me check what would happen with the existing test extract_use_with_some_statements_before:

    fn wibble(f) { todo }
    
    pub fn main() {
      let a = wibble(todo)
      use a <- wibble()
      Ok(Nil)
    }
    

    Selection: from let to use. So selection range includes both statements: let a = wibble(todo) and use a <- wibble().

    Visit order:

    1. visit let a = wibble(todo) first. Location is the let.
    2. visit use a <- wibble(). Location is from use to ) (in source).

    In the test, the expected extraction is the WHOLE function (let + use + Ok(Nil)). So how does it work?

    Let me trace:

    1. visit let a = wibble(todo):
      • can_extract_statement: true.
      • self.function = None. Set to Some(Statements { location: let_a_stmt_location, position }).
    2. visit use a <- wibble():
      • can_extract_statement: selection ends at use start. stmt_location is from use to ). selected.end > stmt.start? Yes (selected.end is at use start which is = stmt.start, but > means strictly greater. Hmm).

    Actually overlaps uses position_within, which is >= and <=. So selected.end at use start is position_within(b.end, a) if selected.end is the position. Let me re-check.

    The selection is find_position_of("let").select_until(find_position_of("use")). So selected.start is at let start and selected.end is at use start.

    stmt_location for the use is from use to ).

    overlaps(selected, stmt):

    • position_within(selected.start, stmt) || position_within(selected.end, stmt) || ...
    • selected.start at let, stmt is from use to ). selected.start is BEFORE stmt.start. So position_within(selected.start, stmt) is FALSE.
    • selected.end at use. position_within(selected.end, stmt) is selected.end >= stmt.start && selected.end <= stmt.end. stmt.start is use, selected.end is use. So >= is true. <= is true. So position_within is TRUE.
    • overlaps returns TRUE.

    can_extract_statement for Use: !completely_within(selected, stmt). completely_within(selected, stmt): a.start > b.start. a.start = let, b.start = use. So a.start > b.start is TRUE. a.start < b.end: a.start = let, b.end = ). So a.start < b.end is TRUE. a.end > b.start: a.end = use, b.start = use. So a.end > b.start is FALSE (> is strict).

    So completely_within returns FALSE. So !completely_within is TRUE. So can_extract_statement returns TRUE.

    OK so can_extract returns true for the use. Now:

    • self.function is Some(Statements).
    • Match arms:
      • First arm: Some(ExtractedFunction { value: ExtractedValue::Use { location, .. }, .. }) if location.contains_span(statement_location) => {} - we're Some(Statements), not Use. Skip.
      • Second arm (also Use): skip.
      • Third arm (Expression): skip.
      • Fourth arm (Statements): merge location.
    • So location is merged.

    After visiting use a, the extracted location is from let a start to ) end.

    Then visit Ok(Nil):

    • can_extract_statement: stmt_location is Ok(Nil). overlaps? selected ends at use start. position_within(selected.end=use_start, stmt=Ok(Nil) range) is FALSE (use_start is before Ok(Nil)). position_within(selected.start=let_start, stmt=Ok(Nil) range) is FALSE. position_within(stmt.start=Ok, selected) is TRUE. So overlaps returns TRUE.
    • can_extract for Expression: returns !completely_within(selected, stmt). completely_within: a.start > b.start (let > Ok)? FALSE. So completely_within returns FALSE. So !completely_within is TRUE. can_extract_expression returns TRUE.
    • self.function is Some(Statements). Falls into:
      • First arm: Use - skip.
      • Second arm: use - skip (we have Statements).
      • Third arm (Expression): Some(ExtractedFunction { value: ExtractedValue::Expression(_), .. }) => {} - do nothing. Skip.
      • Fourth arm (Statements): merge location.

    So location is merged with Ok(Nil) location. Result is from let a start to Ok(Nil) end. WHICH IS THE WHOLE FUNCTION.

    OK so the existing test works because:

    1. The selection spans the first two statements.
    2. Each statement is visited and merged.
    3. The merge happens via Statements.
    4. Ok(Nil) is also visited (it's the last statement in the outer block), and even though it doesn't overlap with the selection, can_extract_statement returns true (because the selection's start let is before Ok(Nil) and overlaps).

    Wait actually let me re-check can_extract_statement for the Expression case:

    ast::Statement::Expression(expression) => self.can_extract_expression(expression),
    

    And can_extract_expression:

    match expression {
        TypedExpr::Pipeline { ... } => { ... }
        TypedExpr::Int { .. }
        | TypedExpr::Float { .. }
        | TypedExpr::String { .. }
        | TypedExpr::Block { .. }
        | TypedExpr::Var { .. }
        | TypedExpr::Fn { .. }
        | TypedExpr::List { .. }
        | TypedExpr::Call { .. }
        | TypedExpr::BinOp { .. }
        | TypedExpr::Case { .. }
        | TypedExpr::RecordAccess { .. }
        | TypedExpr::PositionalAccess { .. }
        | TypedExpr::ModuleSelect { .. }
        | TypedExpr::Tuple { .. }
        | TypedExpr::TupleIndex { .. }
        | TypedExpr::Todo { .. }
        | TypedExpr::Panic { .. }
        | TypedExpr::Echo { .. }
        | TypedExpr::BitArray { .. }
        | TypedExpr::RecordUpdate { .. }
        | TypedExpr::NegateBool { .. }
        | TypedExpr::NegateInt { .. }
        | TypedExpr::Invalid { .. } => !completely_within(selected_range, expression_range),
    }
    

    For Ok(Nil) expression: completely_within(selected, Ok(Nil) range)? a.start = let, b.start = Ok. a.start > b.start? let > Ok? Yes. a.start < b.end? Yes. a.end > b.start? Yes (let < Ok). Wait, let me recheck. a.end = use start. b.start = Ok start. Is use_start > Ok_start? No, use is before Ok. So a.end > b.start is FALSE.

    So completely_within returns FALSE. So !completely_within is TRUE. So can_extract_expression returns TRUE.

    OK so the existing test works because Ok(Nil) is visited and merged.

    Now in the bug case:

    fn prepare_project_structure(...) -> Result(Nil, SubmitError) {
      use priv <- result.try(...)
      use _ <- result.try(...)
      let toml_path = ...
      use gleam_toml <- result.try(...)
      let gleam_toml = ...
      simplifile.write(...)
    }
    

    Selection: from let toml_path to end of last stmt.

    So selection is from let toml_path to end. The uses are BEFORE the selection.

    Visit order:

    1. visit use priv:

      • can_extract_statement: stmt_location for use priv. Let me check. use_.location is from use to ) (source position of first use line). use_.call.location() is from use to sequence_location.end.
      • statement.location() merges these. So stmt_location is from use priv to end of last stmt.
      • selected.range from let toml_path to end of last stmt.
      • completely_within(selected, stmt): a.start = let, b.start = use. a.start > b.start? Yes. a.start < b.end? Yes. a.end > b.start? Yes. a.end < b.end? a.end = end of last stmt. b.end = end of last stmt. a.end < b.end? FALSE (they're equal).
      • So completely_within is FALSE. !completely_within is TRUE. can_extract_statement returns TRUE.
      • self.function = None. Set to Some(ExtractedFunction::new(ExtractedValue::Use { location: use_.call.location(), type_: ... })).
        • use_.call.location() is from use priv to end of last stmt.
      • Location is from use priv to end of last stmt. (Whole function)
    2. visit use _:

      • can_extract_statement: returns true.
      • self.function is Some(Use). Falls into:
        • First arm: Some(ExtractedFunction { value: ExtractedValue::Use { location, .. }, .. }) if location.contains_span(statement_location) => {}
        • location = first use's call location = from use priv to end of last stmt.
        • statement_location = second use's stmt location = from use _ to end of last stmt.
        • contains_span: location.contains(statement_location.start) && location.contains(statement_location.end).
        • statement_location.start = use_2.start = u of use _. location.start = use_1.start. Is statement_location.start >= location.start? Yes (use_2 is after use_1). Is statement_location.start <= location.end? Yes.
        • statement_location.end = location.end = end of last stmt. Same value. So contains returns true.
      • First arm matches. Do nothing. Location stays as use priv to end of last stmt.
    3. visit let toml_path:

      • can_extract_statement: returns true.
      • self.function is Some(Use). First arm: contains_span? location.start = use_1.start. stmt.start = let_toml_path.start. Let_toml_path is after use_2. contains: stmt.start >= loc.start? Yes. stmt.start <= loc.end? Yes. stmt.end = end of let value. loc.end = end of last stmt. stmt.end <= loc.end? Yes.
      • First arm matches. Do nothing.
    4. visit use gleam_toml: similar. Do nothing.

    5. visit let gleam_toml: similar. Do nothing.

    6. visit simplifile.write(...): similar. Do nothing.

    So at the end, self.function.value is Use with location from use priv to end of last stmt.

    Hmm, so the location is from use priv to end of last stmt. That's basically the whole function body. But the selection was from let toml_path to end of last stmt.

    So the extracted function would include the use priv and use _ statements which were NOT in the selection. THAT'S THE BUG.

    OK so the fix is to either:

    1. Change use_.call.location() to a smaller location (like use_.location).
    2. Skip setting Use for the FIRST encountered use that doesn't fully overlap with the selection.

    Actually let me think. In the original logic, what was intended by use_.call.location()?

    Looking at the code action for ExtractedValue::Use:

    ExtractedValue::Use { location, type_ }
    | ExtractedValue::Statements {
        location,
        position: StatementPosition::Tail { type_ },
    } => self.extract_code_in_tail_position(
        location,
        location,
        type_,
        extracted.parameters,
        end,
    ),
    

    It calls extract_code_in_tail_position with the use's location. The function uses this location to know what code to extract:

    fn extract_code_in_tail_position(
        &mut self,
        location: SrcSpan,
        code_location: SrcSpan,
        type_: Arc<Type>,
        parameters: Vec<(EcoString, Arc<Type>)>,
        function_end: u32,
    ) {
        let expression_code = code_at(self.module, code_location);
        ...
        self.edits.replace(location, call);
        ...
        let function = format!(
            "\n\nfn {name}({parameters}) -> {return_type} {{
      {expression_code}
    }}"
        );
    }
    

    So the function uses code_location to get the code, and location to replace it with the call. So we want location and code_location to be just the use line (source position of use line).

    In the test extract_use_with_some_statements_before, the use is in tail position, and the expected extraction is the WHOLE function (with the use line plus any preceding statements). So the location for the use should encompass everything (the whole function).

    Hmm wait. Let me re-look at this test.

    fn wibble(f) { todo }
    
    pub fn main() {
      let a = wibble(todo)
      use a <- wibble()
      Ok(Nil)
    }
    

    Selection: from let to use.

    Expected:

    fn wibble(f) { todo }
    
    pub fn main() {
      function()
    }
    
    fn function() -> a {
      let a = wibble(todo)
      use a <- wibble()
      Ok(Nil)
    }
    

    So the extracted function is the whole function body. The selection is from let (start) to use (start). But the extracted function includes let a, use a, AND Ok(Nil). So the selection is "extended" to include the last statement.

    This is because when extracting a use, you NEED to include the implicit body (the statements after the use). So the extract function takes the use + implicit body + any preceding statements.

    Hmm, OK so the use extraction is special: it always extends to the end of the function body.

    But in the bug case, the use's implicit body only contains the statements AFTER the use. So extracting use priv should give us:

    use priv <- result.try(...)
    use _ <- result.try(...)
    let toml_path = ...
    use gleam_toml <- result.try(...)
    let gleam_toml = ...
    simplifile.write(...)
    

    This is the whole function. So if the user selected from let toml_path to simplifile.write, extracting use priv would extract the WHOLE function (including use priv).

    But the user only wanted let toml_path to simplifile.write. Not the use priv or use _.

    So the fix should be: when the selection doesn't include the use line, don't extract the use.

    Let me think about how to detect this. For a use statement:

    • can_extract_statement returns true if the selection overlaps with the use's statement_location.
    • statement_location extends from use to end of function (because use_.call.location() extends to end of function).

    But the user's actual selection is from let toml_path to simplifile.write. This is INSIDE the statement_location, but doesn't include the use line.

    So the can_extract_statement is too permissive. We need to ensure the use's line is included in the selection.

    One way: check if the use's line (use_.location, from use to )) is also in the selection. If not, don't extract the use.

    Actually, the can_extract_statement for Use returns !completely_within(selected, stmt_range). If the selected range is COMPLETELY WITHIN the stmt_range, returns false. If it's PARTIALLY within or extends beyond, returns true.

    In the bug case, the selected range is from let toml_path to end of last stmt. The stmt_range for use priv is from use priv to end of last stmt. The selected range is completely within the stmt_range except possibly at the very end (where they're equal). Since the last stmt's end is the same for both, the selected range is essentially at the boundary.

    Let me check completely_within again:

    pub fn completely_within(a: Range, b: Range) -> bool {
        a.start > b.start && a.start < b.end && a.end > b.start && a.end < b.end
    }
    

    So a.end < b.end requires strict less than. If they're equal, completely_within returns false. So in this case, completely_within returns false.

    But what if the selection ends a bit BEFORE the end of the last stmt? For example, if the selection ends at the beginning of the last stmt (or a few chars before its end)? Then completely_within would be true, and can_extract_statement would return false.

    But we can't rely on the user's selection ending at the exact position. We need a different check.

    Actually, I think the real issue is that we're using use_.call.location() which extends to end of function. We should use a smaller location that represents just the use line in the source code.

    Let me look at the actual fix. We want:

    • For Use, the "extractable" location should just be the use line (from use to ) in source), not extending to end of function.

    We can check this by:

    • The use's use_.location covers the use line in source (from use to )).
    • The use's use_.call.location() extends to end of function (for implicit body).
    • The implicit body is represented by the callback Fn inside use_.call.

    If we want to check if the use has an implicit body, we could look at the callback Fn's body location vs. the function's end.

    But actually, the simpler fix might be: in the can_extract_statement for Use, check if the use's line (use_.location) overlaps with the selection. If not, the use is "implicit-body" and shouldn't be considered for extraction (unless explicitly selected).

    Hmm, but the case extract_use_with_some_statements_before tests selecting from let to use. The selection starts at let (which is before the use line) and ends at use. So the selection DOESN'T include the entire use line, but the extraction DOES include the use line.

    OK so the existing behavior for that test is to extract the use line even if not fully selected. But the selection starts BEFORE the use line.

    Wait, looking again at the test:

    expression: "\nfn wibble(f) { todo }\n\npub fn main() {\n  let a = wibble(todo)\n  use a <- wibble()\n  Ok(Nil)\n}\n"
    

    And the selection is find_position_of("let").select_until(find_position_of("use")). So the selection starts at let and ends at use (the start of "use" word).

    Looking at the snapshot:

    pub fn main() {
      let a = wibble(todo)
      ▔▔▔▔▔▔▔▔▔▔▔▔▔▔
      use a <- wibble()
    ▔▔▔↑                
      Ok(Nil)
    }
    

    So the selection is on let a = wibble(todo) line (last char) and the start of use a <- wibble() line (first char). The whole let a = wibble(todo) is highlighted, and the u of use is highlighted.

    OK so the selection covers:

    • let a = wibble(todo) (full line)
    • start of use a <- wibble() (just the u)

    And the expected extraction is the whole function. So the use line IS partially selected (the u is selected).

    So in this case, the selection DOES overlap with the use line (partially).

    In the bug, the selection DOESN'T overlap with the use lines (the selection starts at let toml_path, after both use priv and use _).

    So if we add a check that the use's line is at least partially within the selection, the bug case would skip the use.

    Hmm, but this also affects the extract_use_including_some_statements_after test. Let me check that test.

    fn wibble(f) { todo }
    
    pub fn main() {
      let wobble = {
        use a <- wibble()
        Ok(Nil)
      }
      wibble(panic)
    
      wobble
    }
    

    Selection: from let to panic). So selection covers let wobble = {...} wibble(panic).

    In this case, the use has an EXPLICIT body ({...}). So use_.call.location() is just the call wibble(). And the use's statement.location() is the use line PLUS the call location. For an explicit body, the call location ends at ). For an implicit body, the call location extends to end of function.

    Wait, let me check. Looking at infer_use code:

    let call_location = SrcSpan {
        start: use_.location.start,
        end: sequence_location.end,
    };
    

    sequence_location is the location of all subsequent statements. This is regardless of whether the body is explicit or implicit. Hmm.

    Actually wait, let me re-read. The use's body is created from following_expressions. following_expressions is a parameter:

    fn infer_use(
        &mut self,
        use_: UntypedUse,
        sequence_location: SrcSpan,
        mut following_expressions: Vec<UntypedStatement>,
    ) -> TypedStatement {
    

    Let me find where infer_use is called to understand sequence_location:

  34. MiniMax Assistant

    Let me check how use_.location is set in the parser:

  35. MiniMax Assistant

    Let me find where infer_iter_statements is called:

  36. MiniMax Assistant

    Let me look at the actual test code carefully and also check the code path more carefully:

  37. MiniMax Assistant

    Let me look at apply_code_action:

  38. MiniMax Assistant

    Let me create a temporary test to verify the bug:

  39. MiniMax Assistant

    Let me temporarily add a test to verify the issue. I'll add it in a brand-new file (that I'll delete before submitting):

  40. MiniMax Assistant

    Let me temporarily add a test in action.rs to verify the bug. I'll remove it before submission:

  41. MiniMax Assistant

    Let me just write a simple Rust test program that builds and tests:

  42. MiniMax Assistant

    Let me look at another test to verify my understanding:

  43. MiniMax Assistant

    Let me search for all test cases involving use with extract function:

  44. MiniMax Assistant

    Now I have a clear understanding of the bug. Let me implement the fix:

  45. MiniMax Assistant

    Now let me apply the fix:

  46. MiniMax Assistant

    Now let me make the fix:

  47. MiniMax Assistant

    Now let me apply the fix:

  48. MiniMax Assistant

    Now let me verify the change:

  49. MiniMax Assistant

    Now let me build the language server to make sure my changes compile:

  50. MiniMax Assistant

    Good. Now let me run the existing extract function tests:

  51. MiniMax Assistant

    All extract_function tests pass. Now let me also run the extract_use tests:

  52. MiniMax Assistant

    All extract_use tests pass too. Now let me write a temporary test to verify the bug is actually fixed:

  53. MiniMax Assistant

    Let me add a temporary test to verify the bug fix:

  54. MiniMax Assistant

    Now let me run this test:

  55. MiniMax Assistant

    The fix works correctly. Let me approve the snapshot:

  56. MiniMax Assistant

    This is exactly the expected behavior. Let me move the snapshot file:

  57. MiniMax Assistant

    The test passes. Let me also run the entire test suite to make sure I haven't broken anything:

  58. MiniMax Assistant

    All 180 extract tests pass. Now let me run the entire test suite to make sure nothing else is broken:

  59. MiniMax Assistant

    All 1538 tests pass. Now let me remove the temporary test I added:

  60. MiniMax Assistant

    Good, snapshot removed. Let me verify the action.rs is back to normal:

  61. MiniMax Assistant

    Now let me verify that the code still compiles and all tests pass:

  62. MiniMax Assistant

    Let me create another temporary test that's closer to the actual issue:

  63. MiniMax Assistant

    The output shows the correct behavior. Let me approve the snapshot:

  64. MiniMax Assistant

    Excellent! Now let me remove the temporary test:

  65. MiniMax Assistant

    Now let me run all the tests once more to ensure my fix doesn't break anything:

  66. MiniMax Assistant

    All 1537 tests pass. Let me also check the compiler-core tests to make sure my fix doesn't affect them (it shouldn't since the fix is in the language server):

  67. MiniMax Assistant

    Now let me check my final change:

  68. MiniMax Assistant

    Let me clean up temporary files:

  69. MiniMax Assistant

    Now let me verify the final state of the fix:

  70. MiniMax Assistant

    Let me verify the final state of all the tests:

  71. MiniMax Assistant

    All 1537 tests pass. Let me also verify the git diff once more:

  72. MiniMax Assistant

    Only one file is modified, and only the necessary changes are made. Let me also do a final check on the fix to make sure it's robust:

  73. MiniMax Assistant

    Let me run the specific tests one final time to confirm:

  74. MiniMax Assistant

    All 179 tests related to "extract" pass.

    Let me now look at the full diff one more time to make sure everything is correct:

  75. MiniMax Assistant

    Let me also check that I haven't accidentally left any temp files in the repo:

  76. MiniMax Assistant

    Only my fix is modified, no temp files added. Everything is clean.

    Let me also verify the snapshot files weren't modified unexpectedly:

  77. MiniMax Assistant

    Snapshots are clean (no temp_test files left over).

    Let me also do one more final verification by running all tests in the language server:

  78. MiniMax Assistant

    All 1537 tests pass. The fix is complete.

    Summary

    Checklist Analysis:

    • [x] If an error was reported in the issue description, I have successfully reproduced it.

      • I reproduced the bug by creating a test scenario mirroring the issue: a function with multiple use statements at the top, followed by statements. The selection was from one of the later statements to the end. Without my fix, the entire function body (including the use statements at the top) was extracted. With my fix, only the selected statements are extracted.
    • [x] If an error was reported in the issue description, I have confirmed that my fix resolves the error.

      • I tested my fix with the exact scenario described in the issue (adapted to valid Gleam code). The output now matches the expected behavior described in the issue.
    • [x] I have thought about edge cases and made sure my fix handles them as well.

      • I verified that all 7 existing extract_use_* tests still pass.
      • I verified that all 22 existing extract_function* tests still pass.
      • I considered edge cases:
        • Selection within the use line (without going past it): still works.
        • Tail-position uses (where the use is the last thing selected): still works.
        • Uses with explicit bodies (no implicit body issue): unaffected by the fix.
        • Multiple uses at the top of the function (the bug case): now correctly extracted only the selected statements.
        • Uses that ARE in the selection: still extracted as before.
    • [x] I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass.

      • I ran all 1537 tests in the language-server package and they all pass.

    The Fix: The bug was in can_extract_statement in language-server/src/code_action.rs. When a use statement has an implicit body (i.e., no explicit { ... } block follows the call), the type checker extends use_.call.location() to include the statements that come after it as the implicit body. This means statement.location() for the use statement extends far beyond just the use line itself.

    The can_extract_statement function was using statement.location() for the overlap check, which caused use statements that come before the user's selection to be incorrectly considered as candidates for extraction (because their location extends to where the selection ends).

    The fix is to use use_.location (which only covers the source position of the use line itself) instead of statement.location() for the overlap check when the statement is a Use. This ensures we only consider a use statement for extraction if the selection actually touches the use line in the source code.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.