Skip to content
TheChatArchiveThe Chat Archive
xiaomi/mimo-v2.5-pro· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Pending backups can preempt a backup that is already executing Backup…

  1. User

    ISSUE DESCRIPTION

    Pending backups can preempt a backup that is already executing

    Backup scheduling must not select a pending backup while another backup is already executing. When none is executing, select the oldest pending backup, using a deterministic tie-break for equal creation times.

    Interface

    Type: Function Name: IsExecuting Path: api/v1/backup_funcs.go Input: () Output: bool Description: Returns true if the backup has started or is running. Use this to determine whether a backup holds active resources and should not be preempted.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /cloudnative-pg, current file: none) bash-$

  2. Assistant

    I'll start by exploring the repository structure to understand the codebase. Let's first see what's in the current directory.

  3. Assistant

    Let me look at the specific file mentioned in the issue and the surrounding code.

  4. Assistant

    Let me first examine the backup types and functions to understand the data structures and current implementation.

  5. Assistant

    Let me see the rest of the file.

  6. Assistant

    Let me continue reading the file to see the rest of it.

  7. Assistant

    Let me see the rest of the file.

  8. Assistant

    Let me also look at the backup_types.go to understand the BackupStatus structure and the BackupPhase types.

  9. Assistant

    Now let me look at the test file for backup_funcs:

  10. Assistant

    Let me continue reading the test file to understand how tests are currently written.

  11. Assistant

    Let me continue reading the test file to understand how CanExecuteBackup is tested.

  12. Assistant

    Let me continue reading the test file.

  13. Assistant

    Let me continue reading the test file and understand the full scope.

  14. Assistant

    Let me search for where CanExecuteBackup is called and understand the backup scheduling logic.

  15. Assistant

    Let me look at the backup controller to understand the scheduling logic.

  16. Assistant

    Let me continue reading the backup controller to understand how CanExecuteBackup is used. ws-$ </function_results>

    Let me look at the area where CanExecuteBackup is called.

  17. Assistant

    Let me make only one call at a time.

  18. Assistant

    Let me look at the code around that line.

  19. Assistant

    Now let me understand the full picture of how CanExecuteBackup works and how it's called. Let me also check where GetPendingBackupNames is used elsewhere.

  20. Assistant

    Now let me understand the full picture. Let me look at the exact CanExecuteBackup function and the phase definitions to understand the issue:

  21. Assistant

    Now I have a clear picture of the issue. Let me trace through the bug scenario:

    1. backup-1 is pending (phase=pending, set by waitIfOtherBackupsRunning)
    2. backup-2 is running (phase=started/running)
    3. When backup-1 is reconciled, CanExecuteBackup("backup-1") is called
    4. The list is sorted by name: [backup-1, backup-2]
    5. Iterating: backup-1 has IsInProgress() == true, and it matches backupName, and !foundRunningBackup is true → returns true incorrectly!

    The pending backup preempts the running backup because IsInProgress() includes BackupPhasePending.

    Let me first run the existing tests to see the baseline:

  22. Assistant

    Let me check the go environment.

  23. Assistant

    Let me set up the Go environment and try running the tests again.

  24. Assistant

    Let me set up the environment properly.

  25. Assistant

    Let me try a broader pattern.

  26. Assistant

    The tests use Ginkgo. Let me run them properly.

  27. Assistant

    Good, all 226 tests pass. Now I understand the issue clearly. Let me implement the fix.

    The problem is in CanExecuteBackup:

    1. IsInProgress() includes BackupPhasePending, so a pending backup is treated as "already running"
    2. When the list is sorted by name, if a pending backup (e.g., backup-1) appears before a running backup (e.g., backup-2), CanExecuteBackup("backup-1") returns true even though backup-2 is already executing
    3. This means pending backups can preempt executing backups

    The fix:

    1. Add IsExecuting() that returns true only for BackupPhaseStarted or BackupPhaseRunning
    2. Modify CanExecuteBackup() to first check if any backup is executing; if so, only that backup can proceed
    3. When no backup is executing, select the oldest pending backup with deterministic tie-breaking for equal creation times (using name)

    Let me implement the changes:

  28. Assistant

    Now let me add the IsExecuting method after IsDone:

  29. Assistant

    I see there's a duplicate comment. Let me fix that:

  30. Assistant

    The heredoc wasn't terminated. Let me try again properly.

  31. Assistant

    Let me check the file to see if the duplicate was removed.

  32. Assistant

    I see I accidentally deleted the comment for GetOnline. Let me fix that:

  33. Assistant

    The heredoc needs a closing EOF line. Let me use sed instead.

  34. Assistant

    Let me check the result.

  35. Assistant

    Good, the IsExecuting() method is properly added. Now let me look at the current CanExecuteBackup method and then modify it:

  36. Assistant

    Now let me modify the CanExecuteBackup function. I need to rewrite it to implement the correct logic:

  37. Assistant

    Now I can see the bug clearly. Let me replace the CanExecuteBackup function:

  38. Assistant

    Let me verify the changes:

  39. Assistant

    Good. Now let me run the existing tests to verify they still pass:

  40. Assistant

    All 226 tests pass. Now let me also run the backup controller tests to make sure nothing is broken there:

  41. Assistant

    The controller tests use Ginkgo too. Let me also check if there are tests for the backup controller specifically:

  42. Assistant

    Let me run the backup controller tests and other related tests:

  43. Assistant

    All 348 controller tests pass. Let me also run other backup-related tests:

  44. Assistant

    There's a test failure in the postgres package, but it's a PANIC in a test that seems unrelated to my changes. Let me verify it's a pre-existing issue by checking the test:

  45. Assistant

    Good, the postgres test failure is pre-existing (it's a PANIC related to the backup command, not my changes). Let me verify the full compilation:

  46. Assistant

    Good, no compilation errors. Let me run the backup controller tests and also check if the existing tests test the specific bug scenario:

  47. Assistant

    Let me verify the file looks complete and correct by reading the final version:

  48. Assistant

    The file looks clean and correct. Let me write a quick test script to verify the fix works for the specific bug scenario:

  49. Assistant

    All verification tests pass. Let me run the full test suites one more time to confirm everything is good:

  50. Assistant

    Let me also run the backup controller tests to be sure.

  51. Assistant

    All tests pass. Let me clean up the temporary test file and check the git diff to confirm my changes:

  52. Assistant

    Now let me check the git diff to confirm my changes:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.