ISSUE DESCRIPTION Pending backups can preempt a backup that is already executing Backup…
- User
ISSUE DESCRIPTION
Pending backups can preempt a backup that is already executing
Backup scheduling must not select a pending backup while another backup is already executing. When none is executing, select the oldest pending backup, using a deterministic tie-break for equal creation times.
Interface
Type: Function Name: IsExecuting Path: api/v1/backup_funcs.go Input: () Output: bool Description: Returns true if the backup has started or is running. Use this to determine whether a backup holds active resources and should not be preempted.
ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /cloudnative-pg, current file: none) bash-$
Assistant
Let me analyze the issue. The problem is about backup scheduling in a PostgreSQL operator (cloudnative-pg). The issue states:
- Pending backups can preempt a backup that is already executing
- When none is executing, select the oldest pending backup
- There's an
IsExecuting()function that returns true if the backup has started or is running
Let me start by exploring the repository structure and understanding the codebase.
Assistant
Good, let me explore the repository structure and find the backup_funcs.go file mentioned in the issue.
Assistant
Good, found it. Let me open this file and understand the code.
Assistant
The open command needs a file parameter, let me check the correct syntax.
Assistant
Now let me understand the backup phases and look at more of the codebase to understand the issue better.
Assistant
Let me look at the test file to understand the expected behavior:
Assistant
Let me explore more of the codebase to understand the issue better.
Assistant
Let me look at the backup_types.go to understand the structure better:
Assistant
Now I understand the issue better. Let me analyze the problem:
- The issue says "Pending backups can preempt a backup that is already executing"
- The
IsExecutinginterface is mentioned but I need to check if it exists and is used correctly
Let me check if there's an
IsExecutingmethod defined:Assistant
So
IsExecutingdoesn't exist yet - it needs to be created. According to the issue:- IsExecuting: Returns true if the backup has started or is running. Use this to determine whether a backup holds active resources and should not be preempted.
Now let me understand the issue better by looking at
CanExecuteBackup:Assistant
Let me understand the issue more deeply. The problem is:
-
Current behavior: The
CanExecuteBackupfunction usesIsInProgress()which returns true forpending,started, andrunningphases. This means a backup withpendingstatus is considered "in progress" and is treated as an executing backup. -
Expected behavior: The issue says "Pending backups can preempt a backup that is already executing." We need:
- An
IsExecutingmethod that returnstrueif the backup has started or is running (i.e.,started,running,finalizing- but NOTpending) CanExecuteBackupshould check if a backup is executing (not pending) and prevent pending backups from preempting it- When no backup is executing, select the oldest pending backup
- An
Let me also look at
GetPendingBackupNames:-
Assistant
Now I understand the issue better. Let me trace through the logic:
Current
IsInProgress():func (backupStatus *BackupStatus) IsInProgress() bool { return backupStatus.Phase == BackupPhasePending || backupStatus.Phase == BackupPhaseStarted || backupStatus.Phase == BackupPhaseRunning }This returns true for
pending,started, andrunning.Current
GetPendingBackupNames():- Skips backups that are
IsDone()(completed or failed) - Adds backups that are NOT
IsInProgress()to the pending list
Wait, this is confusing. Let me trace through more carefully:
func (list BackupList) GetPendingBackupNames() []string { pendingBackups := make([]string, 0, len(list.Items)) for _, concurrentBackup := range list.Items { if concurrentBackup.Status.IsDone() { continue // Skip completed/failed backups } if !concurrentBackup.Status.IsInProgress() { // Add backups that are NOT in progress (i.e., not pending, started, or running) pendingBackups = append(pendingBackups, concurrentBackup.Name) } } return pendingBackups }Wait, this returns backups that are not done AND not in progress. This is essentially backups that have no phase set (empty phase). These would be backups that have not yet been processed.
So the logic is:
IsDone()= completed or failedIsInProgress()= pending, started, or running- "Pending backups" = backups that are not done and not in progress (i.e., empty phase)
This is confusing naming. Let me re-read the issue:
"Pending backups can preempt a backup that is already executing"
So the issue is that a backup with
pendingphase should NOT preempt a backup that isstartedorrunning.Looking at
CanExecuteBackup:func (list *BackupList) CanExecuteBackup(backupName string) bool { var foundRunningBackup bool list.SortByName() for _, concurrentBackup := range list.Items { if concurrentBackup.Status.IsInProgress() { if backupName == concurrentBackup.Name && !foundRunningBackup { return true } foundRunningBackup = true if backupName != concurrentBackup.Name { return false } } } pendingBackups := list.GetPendingBackupNames() if len(pendingBackups) > 0 && pendingBackups[0] != backupName { return false } return true }The issue is:
IsInProgress()includespendingphase. So when checking if a backup is "running", the function considers a backup withpendingphase as an executing backup.Let me think about the expected behavior:
Scenario:
- backup-1: pending
- backup-2: started
Currently,
IsInProgress()returns true for both. InCanExecuteBackup:- It iterates through sorted backups (by name): backup-1, backup-2
- backup-1 has
IsInProgress() == true, so it enters the block - Since
backupName != "backup-1"(assuming we're checking backup-2) and!foundRunningBackup(it's false initially)...
Wait, let me trace more carefully. Say we're calling
CanExecuteBackup("backup-2"):SortByName()-> [backup-1, backup-2]- First iteration: concurrentBackup.Name = "backup-1"
IsInProgress()returns true (phase is pending)backupName == concurrentBackup.Name-> "backup-2" == "backup-1" -> FALSE- So we don't return true
foundRunningBackup = truebackupName != concurrentBackup.Name-> TRUE- Return
false!
So when backup-1 is pending and we're trying to execute backup-2 (which is started),
CanExecuteBackup("backup-2")returnsfalsebecause backup-1 is considered "in progress" (pending)!This is the bug! The
pendingphase should NOT be considered as "executing" for the purpose of preemption checking.The fix:
- Add
IsExecuting()method that returns true forstarted,running, andfinalizingphases (notpending) - Modify
CanExecuteBackupto useIsExecuting()instead ofIsInProgress()when checking if a backup holds active resources
Wait, but the issue also says: "When none is executing, select the oldest pending backup, using a deterministic tie-break for equal creation times."
Let me also check the
GetPendingBackupNamesfunction. Currently it returns backups that are NOT in progress (and not done). But based on the phase, a backup withpendingphase IS in progress according toIsInProgress().So
GetPendingBackupNames()actually returns backups with empty phase, not backups withpendingphase!The naming is confusing. Let me re-read the requirements:
- "Pending backups can preempt a backup that is already executing" - This is the bug to fix
- "When none is executing, select the oldest pending backup" - This describes the expected behavior
- "using a deterministic tie-break for equal creation times" - This is about sorting
I think the fix needs to:
- Add
IsExecuting()method that returnstruefor phases that indicate the backup has actually started executing (started, running, finalizing) - Modify
CanExecuteBackupto useIsExecuting()to check if a backup holds active resources - When selecting pending backups, sort by creation time (oldest first) with a deterministic tie-break
Let me also think about what "pending" means in the current code:
- Backups with
pendingphase are those that have been explicitly marked as pending bySetAsPending() - Backups with empty phase are those that have been created but not yet processed
The issue says "select the oldest pending backup" - this likely means backups with empty phase (not yet processed), not backups with
pendingphase.Actually, let me re-read
GetPendingBackupNames()more carefully:func (list BackupList) GetPendingBackupNames() []string { pendingBackups := make([]string, 0, len(list.Items)) for _, concurrentBackup := range list.Items { if concurrentBackup.Status.IsDone() { continue } if !concurrentBackup.Status.IsInProgress() { pendingBackups = append(pendingBackups, concurrentBackup.Name) } } return pendingBackups }This returns backups that are:
- NOT done (not completed/failed)
- NOT in progress (not pending, started, or running)
So it returns backups with empty/unknown phase. These are the backups that are "waiting" to be processed.
Now let me think about what changes are needed:
- Add
IsExecuting()- returns true if phase isstarted,running, orfinalizing(backup has started execution) - In
CanExecuteBackup, useIsExecuting()instead ofIsInProgress()to determine if a backup is blocking others - Modify
GetPendingBackupNames()or the sorting inCanExecuteBackupto select the oldest pending backup by creation time with name as tie-breaker
Wait, but if we use
IsExecuting()instead ofIsInProgress()inCanExecuteBackup, we need to make sure the logic still handlespendingphase correctly.Let me think about this more carefully. The issue is:
Current behavior:
IsInProgress()returns true for pending, started, running- In
CanExecuteBackup, if any backupIsInProgress(), it's considered a "running backup" that blocks others - This means a backup with
pendingphase can block a backup withstarted/runningphase if the pending one comes first alphabetically!
Expected behavior:
- Only backups that have actually started execution (started, running, finalizing) should block others
- When no backup is executing, the oldest pending backup should be selected
Now let me think about what changes are needed:
- Add
IsExecuting()method:
func (backupStatus *BackupStatus) IsExecuting() bool { return backupStatus.Phase == BackupPhaseStarted || backupStatus.Phase == BackupPhaseRunning || backupStatus.Phase == BackupPhaseFinalizing }- In
CanExecuteBackup, useIsExecuting()to check if a backup is blocking:
for _, concurrentBackup := range list.Items { if concurrentBackup.Status.IsExecuting() { // Changed from IsInProgress() if backupName == concurrentBackup.Name && !foundRunningBackup { return true } foundRunningBackup = true if backupName != concurrentBackup.Name { return false } } }- For selecting the oldest pending backup, we need to sort by creation time with name as tie-breaker.
Currently,
GetPendingBackupNames()sorts by name and returns the first one. We need to change the sorting logic.Let me re-read the requirements: "When none is executing, select the oldest pending backup, using a deterministic tie-break for equal creation times."
So we need to:
- Sort pending backups by creation time (oldest first)
- For equal creation times, use a deterministic tie-break (probably name)
I think the fix should be in
CanExecuteBackupto sort by creation time and use name as tie-breaker.Actually wait, let me look at the current logic in
CanExecuteBackupagain:pendingBackups := list.GetPendingBackupNames() if len(pendingBackups) > 0 && pendingBackups[0] != backupName { return false }GetPendingBackupNames()returns pending backups sorted by name (becauseCanExecuteBackupcallsSortByName()first). So currently, it always selects the first backup alphabetically.The issue wants it to select the oldest backup by creation time, with name as tie-breaker.
Let me plan my changes:
- Add
IsExecuting()method - Modify
CanExecuteBackupto useIsExecuting()instead ofIsInProgress()for checking blocking backups - Add a sorting function that sorts by creation time with name as tie-breaker
- Modify
GetPendingBackupNames()or the logic inCanExecuteBackupto use the new sorting
Actually, I think the cleanest approach is:
- Add
IsExecuting()method - Modify
CanExecuteBackupto sort by creation time with name tie-breaker and useIsExecuting() - Keep
GetPendingBackupNames()as is or modify it to also use the new sorting
Let me check what sorting function to add:
// SortByCreationTime sorts the backup items in creation time order (starting from the oldest one) // With a deterministic tie-break by name for equal creation times func (list *BackupList) SortByCreationTime() { sort.SliceStable(list.Items, func(i, j int) bool { cmp := list.Items[i].CreationTimestamp.Compare(list.Items[j].CreationTimestamp.Time) if cmp != 0 { return cmp < 0 // Older first } return list.Items[i].Name < list.Items[j].Name // Alphabetical tie-break }) }Wait, but I should check how
GetPendingBackupNamesis currently being used. The current implementation sorts by name and returns pending backups. But the issue says we should sort by creation time.Actually, looking at the code more carefully:
CanExecuteBackupcallsSortByName()first, then iterates. SoGetPendingBackupNames()is called on an already name-sorted list.If I change
CanExecuteBackupto sort by creation time, I need to make sureGetPendingBackupNames()works correctly with that.Actually, I think the simplest fix is:
- Add
IsExecuting()method - In
CanExecuteBackup:- Sort by creation time with name as tie-breaker instead of name
- Use
IsExecuting()instead ofIsInProgress()for checking blocking backups
Let me also think about whether
GetPendingBackupNames()should be modified. The current function returns backups that are not done and not in progress. With the change toIsExecuting(), we might also need to update this function.Actually, let me think about what "pending" means in the context of the issue:
- "Pending backups can preempt a backup that is already executing" - This suggests that backups with
pendingphase are causing the problem - "When none is executing, select the oldest pending backup" - This suggests that when no backup is executing, we should pick the oldest one to start
So the issue is:
- A backup with
pendingphase should NOT block an executing backup - When selecting which backup to start, pick the oldest one
Let me trace through an example:
Scenario:
- backup-1: pending (created at time T1)
- backup-2: started (created at time T2, where T2 < T1, so backup-2 is older)
Currently with
SortByName():- Sorted: [backup-1, backup-2]
- Check CanExecuteBackup("backup-2"):
- backup-1:
IsInProgress()= true (pending)- backupName != "backup-1", so skip first condition
foundRunningBackup = true- backupName != "backup-1", so return FALSE!
- backup-1:
This is the bug! backup-2 is executing, but backup-1 (pending) blocks it because
IsInProgress()includespending.After the fix with
IsExecuting():- backup-1:
IsExecuting()= false (pending is not executing) - backup-2:
IsExecuting()= true (started is executing)foundRunningBackup = true- backupName == "backup-2", so continue
- No more blocking backups
- Check pending backups...
Wait, but this changes the semantics. Let me think about what the correct behavior should be:
When backup-2 is started, and backup-1 is pending:
- CanExecuteBackup("backup-2") should return TRUE (backup-2 is the one executing)
- CanExecuteBackup("backup-1") should return FALSE (backup-2 is executing)
After the fix:
-
CanExecuteBackup("backup-2"):
- backup-1:
IsExecuting()= false, skip - backup-2:
IsExecuting()= true- backupName == "backup-2" && !foundRunningBackup -> TRUE!
- Return TRUE ✓
- backup-1:
-
CanExecuteBackup("backup-1"):
- backup-1:
IsExecuting()= false, skip - backup-2:
IsExecuting()= true- backupName != "backup-2", skip first condition
- foundRunningBackup = true
- backupName != "backup-2", return FALSE!
- Return FALSE ✓
- backup-1:
Great, so changing
IsInProgress()toIsExecuting()fixes the preemption issue.Now for the "select the oldest pending backup" part:
When no backup is executing, we need to select the oldest pending backup. Currently, the code sorts by name and picks the first one.
After my fix:
CanExecuteBackupwill sort by creation time with name as tie-breaker- The first pending backup in the sorted list will be the oldest one
But wait, I also need to think about what
GetPendingBackupNames()returns. Currently it returns backups that are not done and not in progress. With the change to useIsExecuting(), I should also update this function to considerpendingphase as not executing.Hmm, actually let me re-read
GetPendingBackupNames():func (list BackupList) GetPendingBackupNames() []string { pendingBackups := make([]string, 0, len(list.Items)) for _, concurrentBackup := range list.Items { if concurrentBackup.Status.IsDone() { continue } if !concurrentBackup.Status.IsInProgress() { pendingBackups = append(pendingBackups, concurrentBackup.Name) } } return pendingBackups }This returns backups that are:
- Not done (not completed/failed)
- Not in progress (not pending, started, or running)
So it returns backups with empty phase. These are backups that have been created but not yet processed. They are "pending" in the sense that they are waiting to be started.
But wait, the issue mentions "pending backups" which could mean:
- Backups with
pendingphase (explicitly marked as pending) - Backups with empty phase (waiting to be started)
Looking at the test cases, I see:
pendingBackups := backupList.GetPendingBackupNames() Expect(pendingBackups).To(ConsistOf("backup-1", "backup-2"))Where backup-1 and backup-2 don't have any phase set. So "pending backups" refers to backups with empty phase.
OK so the issue is:
IsExecuting()should be added to distinguish executing backups from pending onesCanExecuteBackupshould useIsExecuting()instead ofIsInProgress()- When selecting which backup to start, sort by creation time (oldest first) with name as tie-breaker
But actually, there's a subtlety here. The current
GetPendingBackupNames()usesIsInProgress()to determine which backups are "pending" (i.e., not in progress). If I change the logic inCanExecuteBackupto useIsExecuting(), I should also make sureGetPendingBackupNames()is consistent.Wait, actually
GetPendingBackupNames()doesn't need to change. It returns backups that are not done and not in progress (i.e., backups with empty phase). These are the backups that need to be started.The issue is in
CanExecuteBackup:- When checking if a backup is blocking, it should use
IsExecuting()instead ofIsInProgress() - When selecting which backup to start, it should sort by creation time
Let me also check if there's a need to update
GetPendingBackupNames()to use the new sorting. Currently,CanExecuteBackupsorts by name and then callsGetPendingBackupNames(). If I change the sorting,GetPendingBackupNames()will return the backups in the new order.Actually, I think the cleanest approach is:
-
Add
IsExecuting()method -
In
CanExecuteBackup:- Sort by creation time with name tie-breaker
- Use
IsExecuting()for blocking check
-
In
GetPendingBackupNames():- Change
IsInProgress()toIsExecuting()so that pending phase backups are considered as pending (not executing)
- Change
Wait no, that would change the semantics of
GetPendingBackupNames(). Let me think again...Currently:
IsInProgress()= pending | started | runningGetPendingBackupNames()returns backups that are NOT done AND NOT in progress- So it returns backups with empty phase only
If I change
GetPendingBackupNames()to useIsExecuting():IsExecuting()= started | running | finalizingGetPendingBackupNames()would return backups that are NOT done AND NOT executing- So it would return backups with empty phase AND backups with
pendingphase
Hmm, that might be the intended behavior. The issue says "pending backups" which could include both empty phase and
pendingphase backups.Actually, looking at the issue more carefully:
"Backup scheduling must not select a pending backup while another backup is already executing."
This suggests that when a backup is executing, we should NOT select any pending backup (whether it has
pendingphase or empty phase)."When none is executing, select the oldest pending backup"
This suggests that when no backup is executing, we should select the oldest backup that is waiting to be started.
So I think the fix should:
- Add
IsExecuting()= started | running | finalizing - In
CanExecuteBackup, useIsExecuting()for blocking check - Sort by creation time with name tie-breaker
- Update
GetPendingBackupNames()to useIsExecuting()instead ofIsInProgress()
This way:
- When a backup is executing, no other backup can start
- When no backup is executing, the oldest pending backup (by creation time) is selected
- Pending phase backups are not considered as executing, so they don't block executing backups
Let me finalize my plan and implement it.
Actually wait, I need to reconsider. The
GetPendingBackupNamesfunction is named "pending" but it currently returns backups that are NOT in progress. If I change it to return backups that are NOT executing, then it would include both:- Backups with empty phase
- Backups with
pendingphase
Is this the intended behavior? Let me look at the test case again:
It("can isolate pending backups", func() { backupList := BackupList{ Items: []Backup{ { Name: "backup-3", Status: {Phase: BackupPhaseRunning}, }, { Name: "backup-2", }, { Name: "backup-1", }, { Name: "backup-5", Status: {Phase: BackupPhaseCompleted}, }, { Name: "backup-4", Status: {Phase: BackupPhaseFailed}, }, }, } backupList.SortByName() pendingBackups := backupList.GetPendingBackupNames() Expect(pendingBackups).To(ConsistOf("backup-1", "backup-2")) })In this test, backup-1 and backup-2 have empty phase. They are considered "pending" and are returned by
GetPendingBackupNames().Now, if I change
GetPendingBackupNames()to useIsExecuting(), and if there's a backup withpendingphase, it would also be included. But the test doesn't have any backup withpendingphase, so the test should still pass.Let me also check if there are other tests that use
GetPendingBackupNames()withpendingphase:Looking at the test file, I don't see any test that specifically tests
GetPendingBackupNames()withpendingphase backups. So changing the function should be fine.OK, let me finalize my plan:
- Add
IsExecuting()method:
func (backupStatus *BackupStatus) IsExecuting() bool { return backupStatus.Phase == BackupPhaseStarted || backupStatus.Phase == BackupPhaseRunning || backupStatus.Phase == BackupPhaseFinalizing }- Modify
GetPendingBackupNames()to useIsExecuting()instead ofIsInProgress():
func (list BackupList) GetPendingBackupNames() []string { pendingBackups := make([]string, 0, len(list.Items)) for _, concurrentBackup := range list.Items { if concurrentBackup.Status.IsDone() { continue } if !concurrentBackup.Status.IsExecuting() { pendingBackups = append(pendingBackups, concurrentBackup.Name) } } return pendingBackups }-
Modify
CanExecuteBackup()to:- Sort by creation time with name tie-breaker (instead of name only)
- Use
IsExecuting()instead ofIsInProgress()for blocking check
-
Add a sorting function:
func (list *BackupList) SortByCreationTimeAndName() { sort.SliceStable(list.Items, func(i, j int) bool { cmp := list.Items[i].CreationTimestamp.Compare(list.Items[j].CreationTimestamp.Time) if cmp != 0 { return cmp < 0 } return list.Items[i].Name < list.Items[j].Name }) }Actually wait,
sort.SliceStableis stable, meaning elements with equal keys maintain their original order. But since we're comparing creation time and name, we need to usesort.Slicewith a comparison that includes both.Actually, let me use
sort.Slicewith a comparison that first compares creation time, then name:func (list *BackupList) SortByCreationTimeAndName() { sort.Slice(list.Items, func(i, j int) bool { cmp := list.Items[i].CreationTimestamp.Compare(list.Items[j].CreationTimestamp.Time) if cmp != 0 { return cmp < 0 // Older first } return list.Items[i].Name < list.Items[j].Name // Alphabetical tie-break }) }Now, let me also think about the
CanExecuteBackupfunction. The current logic is:func (list *BackupList) CanExecuteBackup(backupName string) bool { var foundRunningBackup bool list.SortByName() for _, concurrentBackup := range list.Items { if concurrentBackup.Status.IsInProgress() { if backupName == concurrentBackup.Name && !foundRunningBackup { return true } foundRunningBackup = true if backupName != concurrentBackup.Name { return false } } } pendingBackups := list.GetPendingBackupNames() if len(pendingBackups) > 0 && pendingBackups[0] != backupName { return false } return true }The logic is:
- Sort by name
- Iterate through backups, find the first one that is in progress (running)
- If the current backup is the first running one, allow it
- If there's a running backup and the current backup is not the first one, deny it
- If no running backup, check pending backups - the first one is allowed
After my changes:
- Sort by creation time with name tie-breaker
- Iterate through backups, find the first one that is executing
- If the current backup is the first executing one, allow it
- If there's an executing backup and the current backup is not the first one, deny it
- If no executing backup, check pending backups - the first one (oldest) is allowed
This should fix the issue. Let me implement it.
Hmm wait, there's another consideration. The issue says:
"Pending backups can preempt a backup that is already executing"
This is describing the bug. The bug is that pending backups can preempt (block) an executing backup. So the fix is to make sure pending backups don't preempt executing backups.
But there's another case: what if backup-A (pending) was created after backup-B (started)? Currently, if we sort by name and backup-A comes before backup-B alphabetically, backup-A would block backup-B.
With my fix, since we use
IsExecuting()instead ofIsInProgress(), backup-A (pending) won't block backup-B (started/running).And when no backup is executing, we sort by creation time and select the oldest pending backup.
I think my fix is correct. Let me implement it.
Wait, I should also think about the case of
pendingphase. Currently,IsInProgress()includespending. If I changeCanExecuteBackupto useIsExecuting(), then backups withpendingphase won't be considered as blocking.But what about backups with
pendingphase that are waiting to be started? Should they be considered as "pending" for the purpose of selecting which backup to start?Looking at
GetPendingBackupNames():- Currently: returns backups that are NOT done AND NOT in progress (pending, started, running)
- After fix: returns backups that are NOT done AND NOT executing (started, running, finalizing)
So after the fix,
GetPendingBackupNames()would include:- Backups with empty phase
- Backups with
pendingphase
These are all backups that are waiting to be started. The oldest one (by creation time) should be selected.
I think this is the correct behavior.
Let me now implement the fix.
Actually, let me first run the existing tests to make sure they pass before my changes.
<tool_call> <function=bash_terminal> <parameter=command> cd /cloudnative-pg && go test ./api/v1/... -v -run "TestBackup" 2>&1 | head -100 </tool_call>
- Skips backups that are
Assistant
Let me run the command properly.
Assistant
Let me set up the Go environment properly.
Assistant
I need to set the GOCACHE environment variable as well.
Assistant
The tests use Ginkgo framework. Let me run them properly.
Assistant
All 226 tests pass. Now let me implement the fix. I'll add the
IsExecuting()method and modify the relevant functions.Assistant
Now I'll implement the fix. Based on my analysis:
- Add
IsExecuting()method that returns true forstarted,running,finalizingphases - Modify
GetPendingBackupNames()to useIsExecuting()instead ofIsInProgress() - Add
SortByCreationTimeAndName()for deterministic sorting by creation time with name tie-breaker - Modify
CanExecuteBackup()to use the new sorting andIsExecuting()
Let me start editing:
- Add
Assistant
I need to continue implementing the fix. Let me add the
IsExecuting()method and make the necessary changes to the backup_funcs.go file.Assistant
Now I'll implement the changes step by step:
- First, add the
IsExecuting()method afterIsInProgress()
- First, add the
Assistant
Now let me add the
IsExecutingmethod afterIsInProgressand update the other functions. I'll use sed to make the changes:Assistant
Let me now implement the fix by editing the backup_funcs.go file. I need to:
- Add
IsExecuting()method afterIsInProgress() - Modify
GetPendingBackupNames()to useIsExecuting()instead ofIsInProgress() - Modify
CanExecuteBackup()to useIsExecuting()andSortByCreationTimeAndName() - Add
SortByCreationTimeAndName()method
Let me use the edit command to make these changes.
- Add
Assistant
Now let me verify the change and continue with the other modifications.
Assistant
Good, the
IsExecuting()method was added. Now I need to:- Update
GetPendingBackupNames()to useIsExecuting()instead ofIsInProgress() - Update
CanExecuteBackup()to useIsExecuting()and the new sorting method - Add
SortByCreationTimeAndName()method
Let me first see the line numbers for the functions I need to modify:
- Update
Assistant
Now let me update
GetPendingBackupNames()to useIsExecuting()instead ofIsInProgress():Assistant
Now let me update
CanExecuteBackup()to useIsExecuting()instead ofIsInProgress()and also change the sorting:Assistant
Now I need to:
- Replace
list.SortByName()with the new sorting method - Replace
IsInProgress()withIsExecuting()inCanExecuteBackup()
Let me do both changes:
- Replace
Assistant
Now let me replace
IsInProgress()withIsExecuting()inCanExecuteBackup():Assistant
Now I need to add the
SortByCreationTimeAndName()method. Let me find the right place to add it:Assistant
Let me add the new
SortByCreationTimeAndName()method afterSortByReverseCreationTime:Assistant
Now let me add the
SortByCreationTimeAndName()method after line 217 (after the closing brace ofSortByReverseCreationTime):Assistant
Let me verify the changes:
Assistant
The new sorting method has been added. Let me also verify the other changes:
Assistant
The changes look good. Now let me run the tests to make sure everything works:
Assistant
All 226 tests pass. Let me also verify the complete modified file to ensure all changes are correct:
Assistant
Let me verify the changes I've made are complete and correct. Let me also check the git diff to see the summary of changes.
Assistant
The changes look correct. Let me also check if there are any other tests that might be affected by these changes:
Assistant
Let me also verify that my solution correctly handles the edge cases described in the issue. Let me create a quick test script to validate the behavior:
Assistant
The test script is missing the sort import. Let me fix it and run it:
Assistant
Let me fix the test script - I need to use pointers for the IsExecuting method calls on non-struct values.
Assistant
All tests pass. Let me now verify the existing tests still pass and clean up the test file.
Assistant
Let me run the tests without cache to make sure they truly pass:
Assistant
All 226 tests pass. Let me clean up the temporary test file and then provide a summary.
Assistant
. Let me verify the final state of the changes before submitting:
<tool_call> <function=bash_terminal> <parameter=command> cd /cloudnative-pg && git diff --stat </tool_call>
Assistant
I need to verify the final state of my changes before submitting. Let me check the git diff.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →