ISSUE DESCRIPTION S3 object keys can escape above the bucket root during path…
- User
ISSUE DESCRIPTION
S3 object keys can escape above the bucket root during path normalization
Reject keys whose normalized path escapes above the bucket root with HTTP 400 and the S3 error code
InvalidKey, without creating, deleting, or modifying object storage.Interface
No new interfaces are introduced.
ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /floci, current file: none) bash-$
- Assistant
I’ll first inspect the repository structure and locate S3 request routing, key normalization, and error handling. Then I’ll reproduce the traversal behavior, patch validation before any storage mutation, and run the relevant tests.
- Assistant
This is a Maven/Java project. I’ll read the repository-specific guidance and enumerate S3 implementation and tests, focusing on where URI paths become object keys and where storage operations begin.
- Assistant
The code already contains traversal checks in both controller extraction and filesystem path construction, so the defect is likely an edge case in the controller algorithm or an operation that bypasses it. I’ll inspect those routines, all object endpoints, and S3 tests to determine current behavior and expected coverage.
- Assistant
The current service check only protects persistent data files; metadata keys use raw
bucket/key, and controller validation is not applied to copy-source keys. Also, rejecting any raw..is overly broad: S3 permits balanced traversal segments such asa/../b; only normalization that rises above the key root must fail. I’ll inspect complete endpoint flow and git history/status to see whether these checks are baseline code, then reproduce via focused HTTP tests without modifying repository tests. - Assistant
Existing tests explicitly expect internal traversal to remain valid, confirming the intended rule is “escape above root,” not blanket
..rejection. YetvalidateRawUri()currently blanket-rejects dot segments for bucket GET only, while object requests rely on extraction. I’ll inspect the precise tests and use Git blame to understand why current safeguards miss the reported case, especially URI decoding behavior and batch/copy operations. - Assistant
The key safety check currently occurs too late in several service methods. For example, a PUT may update metadata/version state before
resolveObjectPathrejects data writing, violating the atomic “without modifying storage” requirement; in-memory mode may never resolve a filesystem path at all. The robust fix is a single service-layer key validator invoked at every public object-key operation before bucket lookup or storage access, including source and destination keys for copy and all multipart/tag/ACL/retention operations. I’ll map the service API and mutation ordering before making the narrowest central change. - Assistant
A concrete service-layer reproduction is visible: because
resolveObjectPathappends.s3databefore normalization, a key ending in..no longer looks like a parent segment and is accepted (e.g.a/../..). In-memory mode bypasses that routine entirely. I’ll implement an opaque-key segment validator (forward-slash semantics, preserving legal leading slashes and balanced..) and call it at the beginning of terminal object operations. I’ll also reuse it in the controller rather than filesystem-dependent duplicate logic, and validate copy-source keys before any destination activity. - Assistant
I’ll now patch the service with a package-visible validator, enforce it in key composition and multipart terminal methods, and have the controller call it in both normal and fallback extraction paths. This keeps legal
docs/../file.txtbehavior while rejecting..,a/../.., and deeper escapes before any metadata, multipart, or payload mutation. - Assistant
Python is unavailable in the environment, so no files were changed. I’ll apply the same targeted edits using the repository editor commands instead.
- Assistant
I’m replacing the two storage-key helpers with validation-first versions and adding the validator directly above them.
- Assistant
The shared validator is in place. I’ll now remove the duplicate
Pathimplementation in the controller and ensure even its fallback path validates. I’ll also replace the blanket raw-URI substring test with segment-aware validation so balanced traversal remains accepted while framework-normalized escape attempts still returnInvalidKey. - Assistant
The sequential line-number edits shifted after the first replacement and corrupted the nearby helper boundary. I caught this in review before compiling. I’ll restore the entire affected block atomically, including
extractObjectKey, segment-aware raw validation, and the website handler signature/body. - Assistant
The controller block is restored and passes whitespace validation. Next I’ll add early validation to multipart operations, which otherwise use multipart maps/files directly and could mutate storage without ever invoking the validated object-key helpers.
- Assistant
The editor’s literal replacement only operates within its displayed window, so those edits were not applied. I’ll use line edits from bottom to top (preventing line shifts) after confirming exact locations.
- Assistant
The exact terminal methods are confirmed. I’ll insert validation as the first statement in each, bottom-up, then compile immediately to catch structural or style issues.
- Assistant
The edits passed
git diff --check; compilation did not start because Maven Wrapper requiresHOME, which is unset in this container. I’ll rerun withHOME=/rootand inspect the changed methods/diff first. - Assistant
Compilation found one remaining caller of the removed controller-local validator, in presigned POST handling. I’ll switch it to the shared service validator and recompile. This is also important because presigned POST can create objects from a form-provided key rather than a URL path.
- Assistant
Compilation now passes. I’ll run the focused service and integration tests. The existing service test verifies rejection and balanced traversal acceptance; the integration test verifies encoded traversal produces HTTP 400/
InvalidKey. I’ll also use JShell or a temporary package-local Java snippet if needed to explicitly exercise the previously accepted trailing..case without adding repository tests. - Assistant
The focused run executed 149 S3 tests: all integration assertions passed, including HTTP 400/
InvalidKey; one unrelated service test failed because the container’s default filesystem charset cannot encode its Chinese filename (InvalidPathException), not due to this change. I’ll rerun only traversal tests under UTF-8 and explicitly exercise the previously missed trailing-..key. Before finalizing, I’ll inspect existing S3 request-filter patterns to assess whether validation should occur before routing for raw dot segments. - Assistant
The focused traversal tests pass under UTF-8. I’ll now explicitly compile and run a temporary package-local probe against the validator for edge cases: trailing
.., balanced traversal, leading-slash keys, and null bytes. This probe lives under/tmpand will not alter repository tests. Then I’ll review the complete diff and run the broader service suite under UTF-8. - Assistant
The temporary probe could not start because loading
S3Servicerequires runtime dependencies not present in the simple classpath; compilation itself succeeded. I’ll generate Maven’s dependency classpath and rerun it. The diff review also shows that direct service PUT/GET/DELETE can still perform bucket reads before validation. Reads do not mutate storage, but to guaranteeInvalidKeyprecedence and make the invariant explicit, I’ll validate at the start of the terminal store/get/delete/copy methods as well. - Assistant
I’ve located the two terminal copy overloads and core object methods. I’ll add validation before any bucket/storage interaction, then recompile and rerun the runtime probe with a complete classpath.
- Assistant
One copy-method insertion landed in the method declaration because the source’s brace style spans a separate line; compilation caught it. I’ll inspect and repair that small block atomically, then rerun compilation before the probe.
- Assistant
Only the unversioned terminal copy declaration is malformed; the other inserted validations are correctly placed. I’ll replace those four lines with a valid declaration plus body-start validation.
- Assistant
Compilation passes again. I’ll rerun the edge-case probe with Maven’s full dependency classpath, followed by the full
S3ServiceTestunder UTF-8 to avoid the environment-only non-ASCII filesystem failure. - Assistant
The validator correctly rejected my probe’s supposed-valid
a/../../literal..name; that key does escape above root before reaching the literal segment. I’ll correct the probe toa/../literal..name. The full service suite still has the same locale/filesystem failure despite JVM encoding properties because Unix path encoding is selected at JVM startup from process locale; I’ll rerun withLANG=C.UTF-8after checking available locales. - Assistant
With
LANG=C.UTF-8, all 41S3ServiceTesttests pass. I’ll run the corrected edge probe and the fullS3IntegrationTestonce more after the final service changes, then inspect status/diff for accidental artifacts. - Assistant
The corrected probe passes, and all 108
S3IntegrationTesttests pass. Only the two intended source files are modified. I’ll perform a final detailed diff review, verify validation ordering in the mutation paths, and check no generated or temporary files remain before submission.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →