Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-sonnet-5· anthropicHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION S3 object keys can escape above the bucket root during path…

  1. User

    ISSUE DESCRIPTION

    S3 object keys can escape above the bucket root during path normalization

    Reject keys whose normalized path escapes above the bucket root with HTTP 400 and the S3 error code InvalidKey, without creating, deleting, or modifying object storage.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /floci, current file: none) bash-$

  2. Claude Assistant

    This is a Java project (Maven). Let's search for S3 key handling code.

  3. Claude Assistant

    Tests pass (silent, no failures shown). Now let's write a reproduction script to check the "no mutation before validation" issue — specifically for deleteObject and putObject in versioning-enabled buckets, and inMemory mode.

  4. Claude Assistant

    Now let's add the validation. First let's add a small helper validateKeyWithinBucket near resolveObjectPath, then use it in storeObject and deleteObject.

  5. Claude Assistant

    Let's use the replace special command instead.

  6. Claude Assistant

    Now let's insert the helper method after line 2165.

  7. Claude Assistant

    Good. Now let's add the call to storeObject.

  8. Claude Assistant

    Good, that's fixed now. Now let's update deleteObject.

  9. Claude Assistant

    Now let's add validation to initiateMultipartUpload for early rejection (defense in depth).

  10. Claude Assistant

    Now let's rebuild and run the repro test plus the existing S3 tests.

  11. Claude Assistant

    All 3 repro tests pass now. Let's run the whole S3 test suite (unit + integration) to ensure nothing broke, then remove the temporary ReproTest.

  12. Claude Assistant

    Confirmed — this failure is pre-existing (environment locale issue, not caused by my change). Let's restore my changes.

  13. Claude Assistant

    All tests pass with proper locale set. Let's confirm no failures reported explicitly.

  14. Claude Assistant

    All tests pass. Now let's remove the temporary ReproTest file and run the full test suite once more to check nothing else broke.

  15. Claude Assistant

    Compiles fine. Now let's run the full test suite for the whole project (in background/foreground) to check nothing else broke, given time constraints let's try with a reasonable timeout.

  16. Claude Assistant

    While that runs in the background, let's double check other places in the code that might construct Path from bucket/key without validation, e.g., in S3Controller.java.

  17. Claude Assistant

    There's an extra closing brace at line 898. Let's fix that.

  18. Claude Assistant

    I made it worse. Let me fix it cleanly with a full rewrite of that method block.

  19. Claude Assistant

    Now it looks correct. Let's check the full test suite that is running in background, and also compile now.

  20. Claude Assistant

    Now let's rerun the S3-focused tests to validate everything (including the batch delete change) with the corrected code.

  21. Claude Assistant

    Good, the current run (13:06) shows all 3 S3 test classes passing with 0 failures/errors. Let's clean up the stale surefire reports and verify diff.

  22. Claude Assistant

    Let's view the full diff to review correctness.

  23. Claude Assistant

    The diff looks clean and minimal. Let's verify test directory has no leftover ReproTest file.

  24. Claude Assistant

    Good — clean, only the intended source change remains. Let's run the S3 tests once more as final confirmation.

  25. Claude Assistant

    All 155 S3-related tests pass. Now let's review the checklist.

  26. Claude Assistant

    Checklist review

    • If an error was reported in the issue description, I have successfully reproduced it. Yes. I wrote a temporary test (ReproTest.java, removed before submission) that demonstrated three concrete manifestations of the bug:

      1. deleteObject/storeObject mutated objectStore metadata before the path-escape check ran (visible clearly with versioning enabled, where a new versioned object entry was persisted into the metadata store even though the key escaped the bucket root and the operation ultimately failed).
      2. In-memory mode (inMemory=true) never validated the key at all — putObject("test-bucket", "../outside.txt", ...) succeeded silently instead of raising InvalidKey, because resolveObjectPath (the only place doing the check) was only invoked from the file-backed writeFile/readFile/deleteFile helpers, which are skipped entirely in in-memory mode.
      3. The non-versioned "delete marker" path in deleteObject never called any path-validating helper at all, since it never touches the filesystem.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error. Yes. After the fix, all three reproduction tests pass: invalid keys are rejected with AwsException("InvalidKey", ..., 400) before any objectStore mutation, and this now happens uniformly regardless of inMemory mode.

    • I have thought about edge cases and made sure my fix handles them as well. Yes:

      • Added the validation call as the very first mutation-adjacent step in storeObject (used by putObject, copyObject via copyS3Object, and completeMultipartUpload), so all creation paths are covered.
      • Added it to deleteObject for all three branches (delete-marker creation, permanent version delete, and non-versioned delete), including validating the versioned path (resolveVersionedPath) when a versionId is supplied, since that also touches disk/version metadata.
      • Added it to initiateMultipartUpload so that multipart uploads for invalid keys are rejected immediately rather than only failing later at completeMultipartUpload.
      • Made deleteObjects (batch delete) propagate the real AwsException error code (e.g. InvalidKey) per-item instead of collapsing it into a generic InternalError.
      • Verified that internal traversal that stays inside the bucket (e.g. docs/../file.txt) is still allowed, matching existing behavior/tests.
      • Confirmed the validation is a pure Path computation (no I/O), so it's safe and cheap to call unconditionally even in in-memory mode.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. Yes. Ran S3ServiceTest (41 tests), S3IntegrationTest (108 tests), and S3LeadingSlashKeyIntegrationTest (6 tests) — all pass (0 failures/errors). I also confirmed that one test failure I initially saw (copyObjectWithNonASCIIKey/copyObjectWithNonAsciiKeySucceeds) is a pre-existing environment locale issue (JVM default charset not UTF-8 when LANG/LC_ALL are unset) unrelated to my change, by reproducing it identically on the unmodified codebase via git stash.

    The temporary ReproTest.java file has been removed and git status shows only the intended S3Service.java modification.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.