Skip to content
TheChatArchiveThe Chat Archive
GLMz-ai/glm-5.2· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Pending backups can preempt a backup that is already executing Backup…

  1. User

    ISSUE DESCRIPTION

    Pending backups can preempt a backup that is already executing

    Backup scheduling must not select a pending backup while another backup is already executing. When none is executing, select the oldest pending backup, using a deterministic tie-break for equal creation times.

    Interface

    Type: Function Name: IsExecuting Path: api/v1/backup_funcs.go Input: () Output: bool Description: Returns true if the backup has started or is running. Use this to determine whether a backup holds active resources and should not be preempted.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /cloudnative-pg, current file: none) bash-$

  2. GLM Assistant

    Let me explore the repository structure and understand the codebase.

  3. GLM Assistant

    Let me look at the backup-related files.

  4. GLM Assistant

    Let me look at the test file to understand the testing conventions and the existing tests for CanExecuteBackup.

  5. GLM Assistant

    Now let me understand the issue. The problem is that CanExecuteBackup selects a pending backup while another backup is already executing. Let me re-read the issue:

    "Pending backups can preempt a backup that is already executing. Backup scheduling must not select a pending backup while another backup is already executing. When none is executing, select the oldest pending backup, using a deterministic tie-break for equal creation times."

    We need to add an IsExecuting function:

    • Name: IsExecuting
    • Path: api/v1/backup_funcs.go
    • Input: ()
    • Output: bool
    • Description: Returns true if the backup has started or is running. Use this to determine whether a backup holds active resources and should not be preempted.

    So IsExecuting should return true when Phase is BackupPhaseStarted or BackupPhaseRunning (and maybe BackupPhaseFinalizing?). The description says "has started or is running." So phases started/running. Let me think about finalizing — finalizing means the backup is being finalized, holds resources... but description says "has started or is running." Let me stick to started/running.

    Wait, but let's think about the current IsInProgress:

    func (backupStatus *BackupStatus) IsInProgress() bool {
    	return backupStatus.Phase == BackupPhasePending ||
    		backupStatus.Phase == BackupPhaseStarted ||
    		backupStatus.Phase == BackupPhaseRunning
    }
    

    So IsInProgress includes pending. The issue wants to distinguish "executing" (started/running) from "pending".

    The problem in CanExecuteBackup: Let me analyze the logic.

    func (list *BackupList) CanExecuteBackup(backupName string) bool {
    	var foundRunningBackup bool
    
    	list.SortByName()
    
    	for _, concurrentBackup := range list.Items {
    		if concurrentBackup.Status.IsInProgress() {
    			if backupName == concurrentBackup.Name && !foundRunningBackup {
    				return true
    			}
    
    			foundRunningBackup = true
    			if backupName != concurrentBackup.Name {
    				return false
    			}
    		}
    	}
    
    	pendingBackups := list.GetPendingBackupNames()
    	if len(pendingBackups) > 0 && pendingBackups[0] != backupName {
    		return false
    	}
    
    	return true
    }
    

    The bug: Consider the case where backup-1 is running (BackupPhaseRunning) and backup-2 is pending. If we call CanExecuteBackup("backup-2"):

    • Loop: backup-1 (running) IsInProgress=true. backupName="backup-2" != "backup-1", so first if false. foundRunningBackup=true. backupName != concurrentBackup.Name ("backup-2" != "backup-1") true, so return false. Good.

    But the issue says "Pending backups can preempt a backup that is already executing." Let me find a scenario where this fails.

    Consider: backup-2 is Running, backup-1 is pending. SortByName sorts alphabetically: backup-1, backup-2.

    Call CanExecuteBackup("backup-1") (pending):

    • backup-1: IsInProgress true (pending). backupName=="backup-1" && !foundRunningBackup (true) -> return true!

    So a pending backup backup-1 returns true even though backup-2 is running! That's the bug. The pending backup is selected while another backup is running.

    So the fix: the loop should only consider executing (started/running) backups for the "currently running" logic, and pending backups should only be selected when no backup is executing.

    Let me redesign CanExecuteBackup:

    The semantics:

    • If a backup is already executing (started/running), only that executing backup can be the one to run. The first executing backup (by some deterministic order) is allowed.
    • When none is executing, select the oldest pending backup (by creation time), with deterministic tie-break for equal creation times (e.g., by name).

    Let me re-read the issue carefully:

    "Pending backups can preempt a backup that is already executing. Backup scheduling must not select a pending backup while another backup is already executing. When none is executing, select the oldest pending backup, using a deterministic tie-break for equal creation times."

    So the requirements:

    1. Must not select a pending backup while another backup is already executing.
    2. When none is executing, select the oldest pending backup, using deterministic tie-break for equal creation times.

    Now IsExecuting returns true if the backup has started or is running. So IsExecuting = Phase == Started || Phase == Running.

    Let me rewrite CanExecuteBackup:

    func (list *BackupList) CanExecuteBackup(backupName string) bool {
    	// Check if there's any executing backup
    	for _, concurrentBackup := range list.Items {
    		if concurrentBackup.Status.IsExecuting() {
    			// Only the executing backup itself can continue; pending backups must not preempt it
    			return backupName == concurrentBackup.Name
    		}
    	}
    
    	// No backup is executing: select the oldest pending backup
    	// with a deterministic tie-break for equal creation times
    	pendingBackups := list.GetPendingBackupNames()
    	// sort by creation time then name
    	...
    }
    

    Wait, but GetPendingBackupNames returns names sorted by name (because the list was sorted by name). But the issue says "select the oldest pending backup, using a deterministic tie-break for equal creation times."

    So we need to sort pending backups by creation time (oldest first), tie-break by name. Let me look at the existing tests to see what they expect.

    Let me look at the tests again. The tests use backups without CreationTimestamp (so all equal, default zero time). With SortByName, the deterministic tie-break by name is used. backup-1 is selected.

    In the test "there are no running backups": backup-1, backup-2, backup-3 all pending (no status). CanExecuteBackup("backup-1") -> true, others false. So oldest pending with equal creation times -> tie-break by name -> backup-1.

    So the new logic must keep this behavior: among pending backups, select oldest by creation time, tie-break by name.

    Now let me think about what GetPendingBackupNames returns. Currently:

    func (list BackupList) GetPendingBackupNames() []string {
    	pendingBackups := make([]string, 0, len(list.Items))
    	for _, concurrentBackup := range list.Items {
    		if concurrentBackup.Status.IsDone() {
    			continue
    		}
    		if !concurrentBackup.Status.IsInProgress() {
    			pendingBackups = append(pendingBackups, concurrentBackup.Name)
    		}
    	}
    
    	return pendingBackups
    }
    

    Wait, this adds a backup to pendingBackups if NOT in progress (i.e., not pending/started/running) and not done. So !IsInProgress() means phase is NOT pending, started, or running. Combined with !IsDone() (not completed/failed). So what's left? Finalizing, walArchivingFailing, or empty phase (""), etc. Hmm. Actually an empty phase means the backup hasn't been processed yet — it's effectively pending.

    Wait, this is confusing. Let me re-read. IsInProgress returns true if phase is pending, started, or running. So !IsInProgress() is true for completed, failed, finalizing, walArchivingFailing, or empty.

    Then !IsDone() removes completed and failed. So pendingBackups includes finalizing, walArchivingFailing, and empty-phase backups.

    Hmm, that's odd. So backups with empty phase (not yet processed) are considered "pending" by GetPendingBackupNames. And backups with phase explicitly "pending" are NOT included (because IsInProgress is true for pending).

    Wait that seems like a bug too? Let me re-read... Actually a backup with phase "pending" — IsInProgress returns true, so !IsInProgress() is false, so it's NOT added to pendingBackups. That seems wrong. A pending backup should be in the pending list.

    Hmm, let me look at git blame / history to understand. Actually, let me re-read carefully.

    Actually wait. Let me reconsider. In the test "there are no running backups", all backups have NO status (empty Phase). So they're not in progress, not done → added to pendingBackups. So pendingBackups = ["backup-1", "backup-2", "backup-3"] (after SortByName). Then pendingBackups[0] = "backup-1". OK.

    But what about a backup explicitly set to BackupPhasePending? It would NOT be added to pendingBackups. That seems inconsistent. Let me check the GetPendingBackupNames test.

  6. GLM Assistant

    So GetPendingBackupNames returns backups that are not in progress and not done — i.e., empty-phase backups (backup-1, backup-2). It does NOT include explicitly pending ones. But there's a difference between "no phase" and "pending phase".

    Hmm. So this is the existing semantic: backups with no phase (not yet processed by controller) are "pending" (waiting to be started). Once the controller starts processing, it sets phase to "pending", "started", "running", etc.

    Wait actually, let me look at the controller to understand how it sets phases. Let me search for SetAsPending usage.

  7. GLM Assistant

    Now I understand the bug. Let me check the controller flow to understand the backup lifecycle and when phases are set.

  8. GLM Assistant

    Let me look at the reconcile flow to understand the full lifecycle and how waitIfOtherBackupsRunning and startBackupManagedByInstance interact.

  9. GLM Assistant

    Let me look at the main Reconcile function to understand the order of operations.

  10. GLM Assistant

    Now let me check where GetPendingBackupNames and IsInProgress are used elsewhere.

  11. GLM Assistant

    IsInProgress is only used within backup_funcs.go (line 153 and 174). Let me check if IsInProgress is used in tests too.

  12. GLM Assistant

    Now I have a clear understanding of the bug. Let me confirm my analysis by writing a reproduction test. The bug: when a pending-phase backup sorts alphabetically before a running backup, CanExecuteBackup returns true for the pending backup (because IsInProgress includes pending), preempting the running backup.

  13. GLM Assistant

    Wrong import path. Should be metav1 "k8s.io/apimachinery/pkg/apis/meta/v1". Let me fix. Also need GOCACHE. Let me set env.

  14. GLM Assistant

    The Ginkgo Describe needs the suite runner. Let me check the test entry point.

  15. GLM Assistant

    Confirmed the bug. Now let me implement the fix. Let me view the exact section to edit.

  16. GLM Assistant

    Now let me implement the fix. First, add the IsExecuting method after IsInProgress:

  17. GLM Assistant

    Now let me rewrite the CanExecuteBackup function:

  18. GLM Assistant

    Now let me update my repro test to also verify the "oldest pending backup by creation time" selection, then run all tests.

  19. GLM Assistant

    All tests pass including my repro tests. Let me also run the broader test suite to ensure nothing else breaks.

  20. GLM Assistant

    Let me run the controller tests to confirm nothing breaks.

  21. GLM Assistant

    All tests pass. Now let me remove my temporary repro test file before submitting.

  22. GLM Assistant

    Let me review the final diff:

  23. GLM Assistant

    The diff looks correct and complete. Let me do a final full test run on the affected packages to confirm everything passes.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.