Skip to content
TheChatArchiveThe Chat Archive
GLMz-ai/glm-5.2· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION S3 object keys can escape above the bucket root during path…

  1. User

    ISSUE DESCRIPTION

    S3 object keys can escape above the bucket root during path normalization

    Reject keys whose normalized path escapes above the bucket root with HTTP 400 and the S3 error code InvalidKey, without creating, deleting, or modifying object storage.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /floci, current file: none) bash-$

  2. GLM Assistant

    I'll start by exploring the repository structure to understand what we're working with.

  3. GLM Assistant

    This is a Java project (Maven). Let me explore the structure further.

  4. GLM Assistant

    Let me explore the S3 service structure.

  5. GLM Assistant

    Let me look at the key files: S3RequestParser, S3Controller, and S3Service.

  6. GLM Assistant

    Let me look at the full S3Controller and search for key extraction usages.

  7. GLM Assistant

    Let me look at the git history and the full picture of key handling.

  8. GLM Assistant

    Let me look at the S3Service to understand the storage layout and path resolution.

  9. GLM Assistant

    Let me look at the controller's copy source handling and other key entry points.

  10. GLM Assistant

    Let me look at the copy source handling methods and how the source key is parsed.

  11. GLM Assistant

    Let me look at the S3Service constructor and dataRoot initialization.

  12. GLM Assistant

    Let me look at the putObject method in S3Service to understand the storage flow.

  13. GLM Assistant

    Let me look at the copyObject and uploadPartCopy methods in S3Service.

  14. GLM Assistant

    Let me look at the existing traversal tests to understand what's covered.

  15. GLM Assistant

    Let me look at the S3ServiceTest setup.

  16. GLM Assistant

    Let me look at the completeMultipartUpload flow and POST multipart handling.

  17. GLM Assistant

    Let me look at the deleteObjects, getObject, and deleteObject methods in S3Service.

  18. GLM Assistant

    Let me look at the deleteObject method and getStoredObject.

  19. GLM Assistant

    Let me write a quick test program to understand the path resolution behavior with various keys.

  20. GLM Assistant

    Let me look at the getObject, headObject, deleteObject, and OPTIONS routes in detail.

  21. GLM Assistant

    OK so all the URL-key routes call extractObjectKey first. The validation is at the controller. Let me now check the OPTIONS routes and whether they bypass validation.

  22. GLM Assistant

    Let me look at the full S3ServiceTest to understand what tests exist.

  23. GLM Assistant

    Let me create a reproduction test to confirm storage is modified before the InvalidKey throw.

  24. GLM Assistant

    I've confirmed the issue: object metadata is leaked into storage before InvalidKey is thrown. Now let me understand the objectKey/versionedKey chokepoints.

  25. GLM Assistant

    Let me check the callers of getStoredObject and the upload/restore/complete methods.

  26. GLM Assistant

    Let me look at the storeObject method body to verify the first storage operation.

  27. GLM Assistant

    Let me look at the upload/multipart/restore/tagging methods to ensure they go through objectKey/versionedKey.

  28. GLM Assistant

    Let me look at restoreObject and the retention/legal-hold methods.

  29. GLM Assistant

    Good. putObjectRetention, getObjectRetention, putObjectLegalHold, getObjectLegalHold all use objectKey/versionedKey. So validating in objectKey/versionedKey covers them.

    Let me check restoreObject.

  30. GLM Assistant

    Let me check the ACL methods.

  31. GLM Assistant

    I've confirmed the issue and understand the fix. The object metadata is leaked into storage before InvalidKey is thrown because the validation only happens during the file write (resolveObjectPath), after objectStore.put. The fix: validate the key at the chokepoint methods objectKey/versionedKey (called by all object operations before any storage mutation), so escaping keys are rejected before any storage is touched.

    Let me make the changes.

  32. GLM Assistant

    Let me open the file at the relevant location and make the edit.

  33. GLM Assistant

    Now let me update the deleteObjects error reporting to propagate AwsException codes (so InvalidKey is reported correctly for batch delete).

  34. GLM Assistant

    Now let me run the reproduction test to confirm the fix works.

  35. GLM Assistant

    The fix works — no metadata leak now. Let me extend the repro test to cover memory mode and the versioned delete-marker case (which previously leaked a delete marker).

  36. GLM Assistant

    All tests passed (no failures shown). Let me confirm with the summary line.

  37. GLM Assistant

    All repro tests pass. Now let me run the existing S3 unit tests to ensure I didn't break anything.

  38. GLM Assistant

    A non-ASCII key triggers InvalidPathException. Let me investigate.

  39. GLM Assistant

    Let me check the JVM encoding used in the Maven test environment.

  40. GLM Assistant

    Both sandbox and service resolve fail for non-ASCII keys in this JVM (jnu encoding is ASCII). Let me check whether the existing test passes on HEAD (without my change) in this environment.

  41. GLM Assistant

    The existing copyObjectWithNonASCIIKey test already fails on HEAD in this environment due to the ASCII sun.jnu.encoding (a pre-existing environment issue, not caused by my change). However, relying on java.nio.file.Path for validation is fragile because it depends on the filesystem encoding and would falsely reject legitimate non-ASCII S3 keys. Let me make the validation string-based (encoding-independent) so it only rejects actual traversal escapes.

    Let me check for non-ASCII key integration tests first.

  42. GLM Assistant

    The non-ASCII tests already fail on HEAD in this ASCII-encoding environment (pre-existing). But relying on java.nio.file.Path for validation is fragile — it depends on the platform filesystem encoding and falsely rejects legitimate non-ASCII S3 keys. I'll make the validation string-based (encoding-independent), so it only rejects actual traversal escapes and null bytes. Let me rewrite validateObjectKey.

  43. GLM Assistant

    Let me remove the probe test and update the repro test to cover the non-ASCII case (memory mode, where no filesystem Path is involved).

  44. GLM Assistant

    All 9 repro tests pass, including non-ASCII keys in memory mode. Now let me run the full S3ServiceTest to check the status.

  45. GLM Assistant

    The only failure is the pre-existing copyObjectWithNonASCIIKey (ASCII jnu.encoding environment issue — identical failure on HEAD, not caused by my change). Let me run the other S3 unit tests that exercise keys to check for regressions.

  46. GLM Assistant

    All pass. Now let me run the main S3 integration test (HTTP flows) to confirm no regressions, especially the traversal tests.

  47. GLM Assistant

    Only the pre-existing copyObjectWithNonAsciiKeySucceeds fails (environment ASCII encoding). Let me confirm it also fails on HEAD.

  48. GLM Assistant

    Confirmed — copyObjectWithNonAsciiKeySucceeds fails identically on HEAD (pre-existing environment issue). My change introduces no regression. Let me run a few more key-related integration tests to be thorough.

  49. GLM Assistant

    Let me also check the batch-delete and versioning integration tests, plus run a broader sweep.

  50. GLM Assistant

    All pass. Now let me check S3VirtualHostTest and S3DumpTest which use deleteObjects, to make sure those still pass.

  51. GLM Assistant

    Let me add a quick test for the copy-source escape path (which previously bypassed controller validation) to confirm it now returns InvalidKey without modifying storage.

  52. GLM Assistant

    I appended after the class's closing brace, causing a duplicate brace. Let me rewrite the file cleanly.

  53. GLM Assistant

    All 11 repro tests pass. Now let me remove the temporary test (per instructions not to add new tests) and review my final changes.

  54. GLM Assistant

    The diff is clean and minimal. Let me verify the project compiles cleanly without the temp test.

  55. GLM Assistant

    Compiles cleanly. Let me run the key S3ServiceTest traversal-related tests to confirm they pass with my change.

  56. GLM Assistant

    All relevant existing tests pass. Let me do a final check of the repository state to ensure no stray files remain.

  57. GLM Assistant

    The repository is clean — only the S3Service.java modification remains. Let me do a final full review of the complete change.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.