Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek/deepseek-v4-pro· deepseekHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Respect backups for OpenCode and Crush generated files Review run…

  1. User

    ISSUE DESCRIPTION

    Respect backups for OpenCode and Crush generated files Review run finding.

    OpenCode and Crush implement custom apply logic that does not fully honour the backup argument. Existing generated instruction/config files can be overwritten without .bak files, despite apply bookkeeping adding backup paths when backups are enabled.

    Impact: user-owned AGENTS.md, CRUSH.md, or .crush.json content can be overwritten without the normal Ruler restoration path.

    Evidence:

    • src/agents/OpenCodeAgent.ts omits the backup parameter for instructions writes.
    • src/agents/CrushAgent.ts writes CRUSH.md and .crush.json directly.

    Expected fix:

    • Accept backup = true in these agent implementations.
    • Resolve paths against projectRoot, create parent directories, and call backupFile before writes.
    • Add tests for backup enabled/disabled behaviour.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /ruler, current file: none) bash-$

  2. DeepSeek Assistant

    Let me start by understanding the repository structure and the issue. The issue is about:

    1. src/agents/OpenCodeAgent.ts - omits the backup parameter for instructions writes
    2. src/agents/CrushAgent.ts - writes CRUSH.md and .crush.json directly

    Both should:

    • Accept backup = true in these agent implementations
    • Resolve paths against projectRoot, create parent directories, and call backupFile before writes
    • Add tests for backup enabled/disabled behaviour

    Let me first explore the repository structure and understand the codebase.

  3. DeepSeek Assistant

    Let me explore the relevant files mentioned in the issue.

  4. DeepSeek Assistant

    Let me read them one at a time.

  5. DeepSeek Assistant

    Now let me look at CrushAgent.ts:

  6. DeepSeek Assistant

    Now let me look at the IAgent interface and other agents to understand the backup mechanism

  7. DeepSeek Assistant

    Let me look at how other agents handle backup and find the backupFile utility

  8. DeepSeek Assistant

    Let me look at the backupFile function and an agent that properly uses backup, like AgentsMdAgent

  9. DeepSeek Assistant

    Now let me look at AbstractAgent.ts:

  10. DeepSeek Assistant

    Let me look at RooCodeAgent.ts since it also handles multiple files (like OpenCode and Crush do

  11. DeepSeek Assistant

    Now let me look at FileSystemUtils to understand backupFile, writeGeneratedFile, and `ensureDirExists

  12. DeepSeek Assistant

    Now let me check the existing tests:

  13. DeepSeek Assistant

    Let me look at the existing test files for OpenCodeAgent and CrushAgent:

  14. DeepSeek Assistant

    Now let me look at the CrushAgent test:

  15. DeepSeek Assistant

    Let me also look at the backup test to understand expected patterns:

  16. DeepSeek Assistant

    Let me check how the backup parameter flows from the apply engine to agents

  17. DeepSeek Assistant

    Let me look at that section of apply-engine.ts:

  18. DeepSeek Assistant

    Let me check if there are any existing backup tests related to OpenCode or Crush:

  19. DeepSeek Assistant

    Let me also look at the OpenCode integration

  20. DeepSeek Assistant

    Now I have a thorough understanding of the issue. Let me summarize the problems:

    OpenCodeAgent.ts:

    1. Missing backup parameter in applyRulerConfig
    2. instructionsPath not resolved against projectRoot
    3. No ensureDirExists or backupFile before writing instructions
    4. No backupFile before writing MCP config

    CrushAgent.ts:

    1. Missing backup parameter in applyRulerConfig
    2. instructionsPath not resolved against projectRoot
    3. No ensureDirExists or backupFile before writing instructions
    4. No backupFile before writing MCP config

    Let me fix both files. First, let me fix OpenCodeAgent

  21. DeepSeek Assistant

    Let me fix OpenCodeAgent.ts. First, update the imports:

  22. DeepSeek Assistant

    Let me use the edit command instead to handle the multi-line replacement properly

  23. DeepSeek Assistant

    Now update the applyRulerConfig method to accept and use the backup parameter:

  24. DeepSeek Assistant

    Good. Now let me fix CrushAgent.ts

  25. DeepSeek Assistant

    Let me see the rest of CrushAgent.ts:

  26. DeepSeek Assistant

    Now let me fix CrushAgent.ts. First, update imports:

  27. DeepSeek Assistant

    Now update the applyRulerConfig method in CrushAgent.ts

  28. DeepSeek Assistant

    I see an extra closing brace on line 131. Let me fix

  29. DeepSeek Assistant

    Good, both files look correct. Let me verify the full files:

  30. DeepSeek Assistant

    Good, both source files look correct. Let me now run the existing tests for both agents:

  31. DeepSeek Assistant

    All OpenCodeAgent tests pass. Now CrushAgent tests:

  32. DeepSeek Assistant

    All tests pass. Now I need to add backup tests. Let me look at how other tests handle backup mocking

  33. DeepSeek Assistant

    Let me look at JunieAgent.test.ts to see the pattern:

  34. DeepSeek Assistant

    Now let me add backup tests. First, update OpenCodeAgent

  35. DeepSeek Assistant

    Let me see the rest of the file:

  36. DeepSeek Assistant

    Let me add backup tests to OpenCodeAgent

  37. DeepSeek Assistant

    Now add backup tests at the end of the file

  38. DeepSeek Assistant

    I see an extra closing brace on line 197. Let me fix

  39. DeepSeek Assistant

    Now let me add backup tests to CrushAgent

  40. DeepSeek Assistant

    Let me see the end of the CrushAgent test file:

  41. DeepSeek Assistant

    Now add backup tests to CrushAgent

  42. DeepSeek Assistant

    Let me check the end of the file to verify correct structure:

  43. DeepSeek Assistant

    There are extra closing braces. Let me check the full tail

  44. DeepSeek Assistant

    Let me see more context around the issue

  45. DeepSeek Assistant

    Let me fix the extra closing braces. Let me remove the last two extra lines

  46. DeepSeek Assistant

    Let me look at lines 480-483:

  47. DeepSeek Assistant

    I see extra braces on lines 482-483. Let me remove

  48. DeepSeek Assistant

    Let me verify line 370 is correct (the close of the original backup and revert

  49. DeepSeek Assistant

    Good, the structure looks correct now. Let me run all the tests

  50. DeepSeek Assistant

    CrushAgent has a compile error. Let me check the end of the file

  51. DeepSeek Assistant

    Let me check the full structure of the CrushAgent

  52. DeepSeek Assistant

    Let me check around line 220-225 and 370:

  53. DeepSeek Assistant

    Let me check the structure around line 100-125 to understand

  54. DeepSeek Assistant

    OK so line 110 shows }); which closes the it('should overwrite .crush.json mcp servers when configured', ...) block. These first-level tests continue up to around line 220. Then there's }); and }); - the last it block closes with }); and then });. But wait, what does }); at line 221 close? There's no inner describe at that point in the first-level tests.

    Hmm, let me look at lines 210-225 more carefully:

  55. DeepSeek Assistant

    Line 220 has }); - this closes the it('should preserve non-remote MCP server types', ...) block. Line 221 has }); - what does this close?

    If there's no inner describe before this, then }); at indentation level 2 would close the outer describe('CrushAgent', ...). But that can't be right because the backup and revert functionality describe is inside CrushAgent.

    Wait, unless the original file had a different structure. Let me look at the indentation more carefully. The it blocks in the first level tests use it(...) (2 spaces). The it closing is }); (also 2 spaces). But line 220 shows }); (4 spaces), which means this it block is inside something else with more indentation.

    Wait, that doesn't match. Let me look at the original CrushAgent test file structure again. Let me check line 50 (the first test):

  56. DeepSeek Assistant

    Let me look at the test around line 200-220

  57. DeepSeek Assistant

    I see the issue. Let me look at lines 185-200

  58. DeepSeek Assistant

    Let me check lines 215-225 carefully

  59. DeepSeek Assistant

    Let me look at the original CrushAgent test structure by looking at git diff

  60. DeepSeek Assistant

    Let me see the rest of

  61. DeepSeek Assistant

    Let me check the original file around line 367-372

  62. DeepSeek Assistant

    Let me run tsc directly to see the exact error location

  63. DeepSeek Assistant

    I think the issue is that the closing of describe('backup and revert functionality', ...) might be missing. Let me check

  64. DeepSeek Assistant

    Let me look at the full backup and revert test block structure

  65. DeepSeek Assistant

    I see the problem now. The closing of it('should properly merge...') has wrong indentation ( }); instead of });), and the closing of describe('backup and revert functionality', ...) is missing. Let me check the original:

  66. DeepSeek Assistant

    I see the problem. Line 369 has wrong indentation (should be }); to close the it block) and the closing of describe('backup and revert functionality', ...) is missing. Let me fix:

  67. DeepSeek Assistant

    I see a duplicate describe('backup behavior'. Let me fix

  68. DeepSeek Assistant

    Let me check the tail again

  69. DeepSeek Assistant

    Let me verify lines 365-375

  70. DeepSeek Assistant

    Let me run tsc again to check

  71. DeepSeek Assistant

    I see the issue - the mcp object closing brace ( },) is missing. Let me fix:

  72. DeepSeek Assistant

    Let me run tsc again

  73. DeepSeek Assistant

    No compile errors in the CrushAgent test file anymore! The other errors are pre-existing. Let me now run the jest tests:

  74. DeepSeek Assistant

    All 34 tests pass. Let me also run a broader set of tests to make sure nothing is broken:

  75. DeepSeek Assistant

    All 14 backup tests pass. Let me run the OpenCode integration test and a few more related

  76. DeepSeek Assistant

    All tests pass. Let me do a final review of all

  77. DeepSeek Assistant

    Let me see the full diff to verify everything

  78. DeepSeek Assistant

    All changes look correct. Let me do a final comprehensive verification by running all the relevant tests:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.