Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek/deepseek-v4-pro· deepseekHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION New isolatedDeclarations error with generic this parameter inference…

  1. User

    ISSUE DESCRIPTION

    New isolatedDeclarations error with generic this parameter inference

    Steps to reproduce

    export function fromProviders<T>() {
      return {
        tearDown(this: {state: T}): void {}
      };
    }
    

    Behavior with typescript@6.0

    no error, .d.ts emitted is:

    export declare function fromProviders<T>(): {
        tearDown(this: {
            state: T;
        }): void;
    };
    

    link

    Behavior with tsgo

    error TS9008: Method must have an explicit return type annotation with --isolatedDeclarations.
    

    link

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /typescript-go, current file: none) bash-$

  2. DeepSeek Assistant

    Let me understand the issue:

    1. In TypeScript's isolatedDeclarations mode, there's a new error when using generic this parameter inference.
    2. The code:
    export function fromProviders<T>() {
      return {
        tearDown(this: {state: T}): void {}
      };
    }
    

    This should work with --isolatedDeclarations but tsgo (the Go-based TypeScript compiler) gives:

    error TS9008: Method must have an explicit return type annotation with --isolatedDeclarations.
    

    The issue is about the this parameter in a method that uses a generic type T from the outer function. The method has a this: {state: T} parameter, and the return type is void. But tsgo is complaining that the method must have an explicit return type annotation.

    Wait, but the method does have : void as the return type. So this might be a bug in the isolated declarations checking where the presence of a generic this type confuses the checker.

    Let me explore the repository structure first.

  3. DeepSeek Assistant

    Let me explore the repository structure, especially the parts related to isolated declarations.

  4. DeepSeek Assistant

    Let me search more specifically for the isolated declarations checker logic.

  5. DeepSeek Assistant

    The key file seems to be ./internal/transformers/declarations/transform.go - this is likely where the isolated declarations transformation happens. Let me also look at the code actions file for the missing type annotation fix.

    Let me search for the error message "must have an explicit return type annotation" to find where TS9008 is raised.

  6. DeepSeek Assistant

    Now let me find where the 9008 error is raised to understand the logic.

  7. DeepSeek Assistant

    Let me look at the diagnostics.go file around line 492 to understand the logic.

  8. DeepSeek Assistant

    Let me open the file with just the line number.

  9. DeepSeek Assistant

    Now let me look at the transform.go file to understand how the return type check is

  10. DeepSeek Assistant

    Let me search for where the return type annotations are checked and where these diagnostics are used

  11. DeepSeek Assistant

    Let me search in all Go files in the declarations directory

  12. DeepSeek Assistant

    Let me search for return type related logic in the transform.go file.

  13. DeepSeek Assistant

    Let me search for the diagnostics related to return type in the entire file.

  14. DeepSeek Assistant

    Let me look at lines 565-610 of diagnostics.go to understand the diagnostic functions

  15. DeepSeek Assistant

    Let me search for createReturnTypeError to find where it's

  16. DeepSeek Assistant

    Let me look at lines 690-717 of diagnostics.go

  17. DeepSeek Assistant

    Let me search for createGetIsolatedDeclarationErrors to understand how isolation

  18. DeepSeek Assistant

    Let me look at tracker.go for more context on how errors are reported

  19. DeepSeek Assistant

    Let me look at the context around line 66 of tracker.go

  20. DeepSeek Assistant

    Let me find where ReportInferenceFallback is called

  21. DeepSeek Assistant

    Let me look at the nodebuilderimpl.go around line 2054 to understand when the inference fallback is triggered for return

  22. DeepSeek Assistant

    Let me look at how the pseudo checker handles this parameter. Let me search for GetReturnTypeOfSignature in the pseudo checker

  23. DeepSeek Assistant

    Let me look at the pseudo checker's GetReturnTypeOfSignature in lookup.go

  24. DeepSeek Assistant

    Let me find and look at createReturnFromSignature

  25. DeepSeek Assistant

    Let me look at createReturnFromSignature at line 204

  26. DeepSeek Assistant

    Let me look at the pseudotype node builder to understand when errors are reported

  27. DeepSeek Assistant

    Let me open it properly.

  28. DeepSeek Assistant

    Let me investigate whether MethodDeclaration is considered FunctionLike and how FunctionLikeData works for methods with this parameter

  29. DeepSeek Assistant

    Let me look at the FunctionLikeData definition

  30. DeepSeek Assistant

    Let me check the IsFunctionLike function and MethodDeclaration

  31. DeepSeek Assistant

    Let me look at the IsFunctionLike implementation

  32. DeepSeek Assistant

    Let me try opening with just the start line

  33. DeepSeek Assistant

    Let me look at isFunctionLikeDeclarationKind

  34. DeepSeek Assistant

    Let me look at line 483

  35. DeepSeek Assistant

    Let me use sed to view lines 483-500

  36. DeepSeek Assistant

    Let me first reproduce the issue by creating a test file and running the compiler.

  37. DeepSeek Assistant

    Let me find the Go compiler executable

  38. DeepSeek Assistant

    Let me try building the compiler and running it with the test file

  39. DeepSeek Assistant

    Let me set up the Go environment and try again

  40. DeepSeek Assistant

    Let me set up the full Go environment

  41. DeepSeek Assistant

    Let me try running the compiler with the test

  42. DeepSeek Assistant

    Let me add the declaration option

  43. DeepSeek Assistant

    Let me understand the flow better. Let me look at how object literals are handled in the pseudo checker

  44. DeepSeek Assistant

    Let me look at typeFromObjectLiteral and related functions

  45. DeepSeek Assistant

    Let me look at how PseudoTypeObjectMethod is handled in the pseudo type node builder

  46. DeepSeek Assistant

    Let me look at those two locations in the pseudo type node builder

  47. DeepSeek Assistant

    Let me use sed to view the relevant sections

  48. DeepSeek Assistant

    Let me look at canGetTypeFromObjectLiteral to see if it rejects methods with this parameters

  49. DeepSeek Assistant

    Let me look at how PseudoTypeObjectLiteral is handled in the pseudo type node builder

  50. DeepSeek Assistant

    Let me look at lines 180-250 in pseudotypenodebuilder.go

  51. DeepSeek Assistant

    Let me search for the definition of PseudoObjectMethod in the pseudo types

  52. DeepSeek Assistant

    Let me look at the PseudoObjectMethod definition

  53. DeepSeek Assistant

    Let me use sed to view the relevant section

  54. DeepSeek Assistant

    Let me look at cloneParameters

  55. DeepSeek Assistant

    Let me look at cloneParameters

  56. DeepSeek Assistant

    Let me look at typeFromParameterWorker

  57. DeepSeek Assistant

    Let me look at typeFromParameterWorker at line 656

  58. DeepSeek Assistant

    Let me search for serializeInferredReturnTypeForSignature

  59. DeepSeek Assistant

    Let me look at serializeInferredReturnTypeForSignature

  60. DeepSeek Assistant

    Let me look at pseudoParametersToNodeList to understand how parameters are serial

  61. DeepSeek Assistant

    Let me look at pseudoParametersToNodeList at line 300

  62. DeepSeek Assistant

    Let me look at nodecopy.go around line 70 where ReportInferenceFallback is called with a

  63. DeepSeek Assistant

    Let me look at reuseNode to understand what it does

  64. DeepSeek Assistant

    Let me look at reuseNode

  65. DeepSeek Assistant

    Let me look at tryReuseExistingNodeHelper to understand when reuse fails

  66. DeepSeek Assistant

    Let me look at tryReuseExistingNodeHelper starting at line 222

  67. DeepSeek Assistant

    Let me write a quick debug script to trace what's happening

  68. DeepSeek Assistant

    Let me search for existing test cases related to this parameter and isolatedDeclarations

  69. DeepSeek Assistant

    Let me look at the testdata directory for ID-related

  70. DeepSeek Assistant

    Let me search for tests related to this parameter in isolated

  71. DeepSeek Assistant

    Let me look at the baselines for isolated declarations to understand the test patterns

  72. DeepSeek Assistant

    Let me look at the errors return types baseline and test file

  73. DeepSeek Assistant

    Let me look at all isolatedDeclarations test cases

  74. DeepSeek Assistant

    Let me look at the isolatedDeclarationErrorsReturnTypes test baselines to understand what errors are expected

  75. DeepSeek Assistant

    Let me create some simpler test cases to narrow down the issue

  76. DeepSeek Assistant

    Let me test these variations

  77. DeepSeek Assistant

    Let me test a few more variations

  78. DeepSeek Assistant

    Let me understand how this parameters are stored in the AST

  79. DeepSeek Assistant

    Let me look at IsThisParameter and how it works

  80. DeepSeek Assistant

    Let me search for enterNewScope in the node builder

  81. DeepSeek Assistant

    Let me search more broadly for enterNewScope

  82. DeepSeek Assistant

    Let me look at enterNewScope definition

  83. DeepSeek Assistant

    Let me look at getExpandedParameters to understand what it does

  84. DeepSeek Assistant

    Let me search properly

  85. DeepSeek Assistant

    Let me look at the FunctionLikeBase structure to understand what Type field is

  86. DeepSeek Assistant

    Let me look at the FunctionLikeBase definition

  87. DeepSeek Assistant

    Let me look at the FunctionLikeBase struct definition

  88. DeepSeek Assistant

    Let me look at getExistingNodeTreeVisitor in nodecopy.go

  89. DeepSeek Assistant

    Let me look for how parameters are visited in the node visitor

  90. DeepSeek Assistant

    Let me look at lines 650-700 of the nodecopy.go visitor

  91. DeepSeek Assistant

    Let me look at pseudoTypeEquivalentToType at line 330 in pseudotypenodebuilder

  92. DeepSeek Assistant

    I think I found the issue! Let me verify by looking at how the pseudo checker clones parameters and whether it includes this parameters.

    Let me first check if the this parameter is included in e.ParameterList():

  93. DeepSeek Assistant

    Now I understand the issue! The this parameter is included in d.Parameters (cloned from e.ParameterList()) but NOT in targetSig.parameters (checker signature). This causes the parameter count mismatch in pseudoTypeEquivalentToType.

    Let me verify this by checking the checker's signature structure:

  94. DeepSeek Assistant

    Let me check the Signature struct to see how thisParameter is stored

  95. DeepSeek Assistant

    Let me look at the Signature

  96. DeepSeek Assistant

    I've found the root cause! The issue is in pseudoTypeEquivalentToType where it compares targetSig.parameters (which does NOT include the this parameter) with d.Parameters (which DOES include the this parameter). The parameter count mismatch causes a false positive error.

    The this parameter should be excluded from the cloned parameters since it's handled separately by the type system. Let me fix it:

  97. DeepSeek Assistant

    Let me look at lastRequiredParamIndex to understand its behavior with this parameters

  98. DeepSeek Assistant

    Let me look at lastRequiredParamIndex at line 617

  99. DeepSeek Assistant

    Now I understand the issue fully. Let me implement the fix. The this parameter should be excluded from cloned parameters in cloneParameters since the checker's Signature.parameters never includes this (it's stored separately in thisParameter).

    Let me look at the cloneParameters function and apply the fix:

  100. DeepSeek Assistant

    Let me use the edit command instead to avoid shell escaping issues

  101. DeepSeek Assistant

    Now let me rebuild and test the

  102. DeepSeek Assistant

    Now let me test the fix with all the

  103. DeepSeek Assistant

    All the test cases pass correctly! Let me also verify the generated .d.ts output for test

  104. DeepSeek Assistant

    The this parameter is lost from the declaration output. My fix was too aggressive - we need to keep this parameters but fix the comparison instead. Let me revert and implement a more precise fix.

  105. DeepSeek Assistant

    Let me look at the full method comparison block in pseudoTypeEquivalentToType to fix it properly

  106. DeepSeek Assistant

    Now I need to fix the comparison instead. The issue is in pseudoTypeEquivalentToType where it compares parameter counts and types. I need to filter out this parameters from the pseudo parameters when comparing.

  107. DeepSeek Assistant

    Now I need to fix the comparison logic. Let me implement a proper fix that handles this parameters correctly

  108. DeepSeek Assistant

    Let me verify how PseudoParameter.Name works and whether my check is

  109. DeepSeek Assistant

    Let me look at PseudoParameter struct

  110. DeepSeek Assistant

    Let me check what IsThisIdentifier looks like and use a more reliable check

  111. DeepSeek Assistant

    Let me look at IsThisIdentifier

  112. DeepSeek Assistant

    Let me verify the AST structure for this parameter

  113. DeepSeek Assistant

    Let me build and test the current fix first

  114. DeepSeek Assistant

    Let me run the tests

  115. DeepSeek Assistant

    Let me check the generated .d.ts output for test1 and test3

  116. DeepSeek Assistant

    The .d.ts output is correct. Now let me run the existing test suite to make sure nothing is broken.

  117. DeepSeek Assistant

    Let me look at how to run specific

  118. DeepSeek Assistant

    Let me look at the test targets in Herebyfile

  119. DeepSeek Assistant

    Let me try running the Go tests for the pseudochecker and checker

  120. DeepSeek Assistant

    Let me look for tests in the declarations transformer

  121. DeepSeek Assistant

    Let me check if there are Go tests related to isolated

  122. DeepSeek Assistant

    Let me run broader tests to ensure nothing is broken

  123. DeepSeek Assistant

    All tests pass. Let me also run the testrunner specifically for isolated declarations related tests:

  124. DeepSeek Assistant

    Let me test a few more edge cases to make sure the fix is robust

  125. DeepSeek Assistant

    Let me verify the .d.ts outputs for the edge

  126. DeepSeek Assistant

    Let me also check if there's a similar issue in PseudoTypeSingleCallSignature and `typeFromFunctionLikeExpression

  127. DeepSeek Assistant

    Let me check the comparison for PseudoTypeSingleCallSignature too

  128. DeepSeek Assistant

    There's the same issue in the PseudoTypeKindSingleCallSignature handling. Let me fix that too.

  129. DeepSeek Assistant

    Let me fix the PseudoTypeKindSingleCallSignature case too

  130. DeepSeek Assistant

    The edit looks incorrect. Let me check the file to see what happened

  131. DeepSeek Assistant

    The edit left some duplicate code. Let me look at the full area and fix it

  132. DeepSeek Assistant

    I need to fix the leftover code. Let me properly integrate the type

  133. DeepSeek Assistant

    Now let me rebuild and test

  134. DeepSeek Assistant

    Good, it compiles. Let me run all the tests again

  135. DeepSeek Assistant

    Let me verify the .d.ts outputs are correct

  136. DeepSeek Assistant

    Now let me run the full test suite to confirm nothing is broken

  137. DeepSeek Assistant

    All tests pass. Let me check for any failures

  138. DeepSeek Assistant

    Let me review the final diff of my

  139. DeepSeek Assistant

    Let me also test a standalone function with this parameter to make sure it still works

  140. DeepSeek Assistant

    Let me fix the test and try

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.