Skip to content
TheChatArchiveThe Chat Archive
xiaomi/mimo-v2.5-pro· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION New isolatedDeclarations error with generic this parameter inference…

  1. User

    ISSUE DESCRIPTION

    New isolatedDeclarations error with generic this parameter inference

    Steps to reproduce

    export function fromProviders<T>() {
      return {
        tearDown(this: {state: T}): void {}
      };
    }
    

    Behavior with typescript@6.0

    no error, .d.ts emitted is:

    export declare function fromProviders<T>(): {
        tearDown(this: {
            state: T;
        }): void;
    };
    

    link

    Behavior with tsgo

    error TS9008: Method must have an explicit return type annotation with --isolatedDeclarations.
    

    link

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /typescript-go, current file: none) bash-$

  2. Assistant

    I'll start by exploring the repository to understand its structure and then locate the issue. Let's first check what files are in the root directory.

  3. Assistant

    This is a TypeScript-Go repository (tsgo), which is a Go implementation of TypeScript. The issue is about isolatedDeclarations error with generic this parameter inference. Let me understand the issue better:

    1. In TypeScript 6.0, the code:
    export function fromProviders<T>() {
      return {
        tearDown(this: {state: T}): void {}
      };
    }
    

    works without error and produces proper .d.ts output.

    1. In tsgo, it gives error: "Method must have an explicit return type annotation with --isolatedDeclarations."

    The issue is that tsgo is incorrectly requiring an explicit return type annotation for a method that has a this parameter with a generic type.

    Let me search for the error message and understand how isolatedDeclarations is implemented.

  4. Assistant

    Let me search for where this error is used in the codebase.

  5. Assistant

    Let me look at the diagnostics.go file in the declarations transformer to understand the error logic.

  6. Assistant

    Now let me understand how the return type inference works for methods with this parameters. Let me look at the checker and inference code:

  7. Assistant

    Let me understand the issue better. The error is about methods needing explicit return types with --isolatedDeclarations. Let me look at how the checker validates this:

  8. Assistant

    Let me search for where the return type annotation is checked for methods.

  9. Assistant

    Let me look for where the return type inference logic checks for the this parameter in the context of isolated declarations. The issue is that the code:

    export function fromProviders<T>() {
      return {
        tearDown(this: {state: T}): void {}
      };
    }
    

    This is triggering "Method must have an explicit return type annotation with --isolatedDeclarations" in tsgo. But TypeScript 6.0 correctly identifies that this method has void as an explicit return type and that the this parameter has an explicit type annotation.

    Let me search for where methods are checked for needing explicit return types.

  10. Assistant

    Let me search for where the checker validates if a method needs an explicit return type:

  11. Assistant

    Let me search for where methods are checked for explicit return types:

  12. Assistant

    Let me look at the emit resolver where the IsolatedDeclarations errors are generated:

  13. Assistant

    Let me search for the checker logic that decides whether to report this error:

  14. Assistant

    Let me search more broadly.

  15. Assistant

    Let me understand the issue better. The method already has : void return type annotation. The error is about the method needing an explicit return type. Let me look at how the checker reports these errors:

  16. Assistant

    Let me look at the checker's logic for checking isolated declarations errors:

  17. Assistant

    Let me search for how isolated declarations checking is done in the checker.

  18. Assistant

    Let me look at the checker for how it determines whether methods need return types:

  19. Assistant

    Let me look at the declaration transformer to understand how it determines whether a method needs a return type:

  20. Assistant

    Let me look at the file that handles method declarations in the declaration transformer more carefully:

  21. Assistant

    Let me search for where the 9008 error is triggered:

  22. Assistant

    Let me look for where the error is produced in the transform.go file by searching for "return type" related text.

  23. Assistant

    Let me search for where the checker validates isolatedDeclarations:

  24. Assistant

    Interesting, no results in checker. Let me search more broadly.

  25. Assistant

    Let me search for the error code 9008:

  26. Assistant

    Let me first create a test file to reproduce the issue and understand the codebase better.

  27. Assistant

    Let me first try to build the tsgo binary and reproduce the error.

  28. Assistant

    Let me look at how the code determines whether a method has an explicit return type.

  29. Assistant

    Let me first try to build the tsgo binary to test it.

  30. Assistant

    Let me check the Go version and set up GOPATH.

  31. Assistant

    Let me set up Go environment and build:

  32. Assistant

    Need to set GOCACHE as well.

  33. Assistant

    Good, it built. Now let me try to run it on the test file.

  34. Assistant

    Need to add --declaration flag.

  35. Assistant

    I've reproduced the error. The method tearDown already has an explicit return type (void), but the error is being triggered. The issue is likely that the return type of fromProviders can't be inferred because the this parameter uses generic T. Let me look at the checker code to understand how return types are inferred for functions with generic this parameters.

  36. Assistant

    Let me look at where the checker creates these errors. Let me search for the logic that checks whether a function/method return type needs annotation:

  37. Assistant

    Let me look at the transform.go file more closely for how it handles method declarations and object literals.

  38. Assistant

    Let me look at the code around line 1277 where CreateReturnTypeOfSignatureDeclaration is called.

  39. Assistant

    Let me look at the checker code that validates the this parameter in the context of isolatedDeclarations:

  40. Assistant

    Let me search for where the error about missing return types is generated:

  41. Assistant

    Let me look at the emit resolver more carefully, particularly the logic that generates the isolated declarations errors:

  42. Assistant

    Now let me look at how the checker validates whether something needs isolatedDeclarations diagnostics. Let me search for where the "IsolatedDeclarations" check is triggered:

  43. Assistant

    Let me look at the checker's checkSourceFile or similar function for isolatedDeclarations:

  44. Assistant

    Let me look at the checker's checkSourceFile method:

  45. Assistant

    Let me look at the checker code around where isolated declarations errors are produced:

  46. Assistant

    Let me look at produceDeferredDiagnostics:

  47. Assistant

    Let me search for where the checker generates this specific error:

  48. Assistant

    Let me look at PrecalculateDeclarationEmitVisibility:

  49. Assistant

    Let me look at the emit resolver's PrecalculateDeclarationEmitVisibility method to see how it handles the this parameter:

  50. Assistant

    Let me look at the checker's logic for checking return types with isolatedDeclarations. Let me search for where the error is produced in the checker:

  51. Assistant

    Let me look at the checkMethodDeclaration function:

  52. Assistant

    Let me trace how the error is generated in the declaration transformer:

  53. Assistant

    Let me search for where the diagnostic callback is set up:

  54. Assistant

    Let me search in the tracker instead.

  55. Assistant

    Let me look at the tracker to understand how the isolated declaration error is used:

  56. Assistant

    Let me search for where getIsolatedDeclarationError is called:

  57. Assistant

    Let me look at the tracker where the error is triggered:

  58. Assistant

    Now I understand the flow! The error is triggered via ReportInferenceFallback. The issue is that when the node builder tries to infer the return type of fromProviders, it encounters the method tearDown with a this parameter that uses a generic type T. The node builder then calls ReportInferenceFallback, which results in the "Method must have an explicit return type annotation" error.

    Let me look at the node builder code that handles signatures with this parameters:

  59. Assistant

    Let me look at how the node builder handles signatures and this parameters:

  60. Assistant

    Let me search for where the node builder handles signatures:

  61. Assistant

    Let me look at the nodebuilder implementation:

  62. Assistant

    Let me search more broadly for the node builder logic:

  63. Assistant

    Let me look at the checker's node builder implementation:

  64. Assistant

    Let me search for where the node builder handles signatures and the this parameter:

  65. Assistant

    Now let me look at the tryGetThisParameterDeclaration and signatureToSignatureDeclarationHelper:

  66. Assistant

    Let me look at serializeReturnTypeForSignature:

  67. Assistant

    Let me look at the serializeReturnTypeForSignature function.

  68. Assistant

    Now I need to understand the pseudo checker's handling of this parameters. Let me look at the pseudo checker:

  69. Assistant

    Let me look at the pseudo checker code.

  70. Assistant

    Let me find the pseudo checker file.

  71. Assistant

    Let me look for the pseudochecker package:

  72. Assistant

    Let me look at the pseudochecker package.

  73. Assistant

    Let me look at the pseudochecker to understand how it handles this parameters.

  74. Assistant

    Let me look at the pseudochecker code more closely.

  75. Assistant

    Let me look at the full file to understand the pseudochecker structure.

  76. Assistant

    Let me look at all the files in the pseudochecker package.

  77. Assistant

    Now let me look at the pseudochecker's GetReturnTypeOfSignature method, which is used in serializeReturnTypeForSignature.

  78. Assistant

    Let me look at the GetReturnTypeOfSignature method in the pseudochecker.

  79. Assistant

    Now let me understand the flow better. The key is how the object type containing the method with this parameter is serialized. Let me look at the pseudoTypeEquivalentToType and serializeInferredReturnTypeForSignature:

  80. Assistant

    Let me look at the pseudoTypeEquivalentToType function:

  81. Assistant

    Let me look at the full pseudoTypeEquivalentToType function:

  82. Assistant

    Let me continue reading the function to understand how it handles object literals with methods.

  83. Assistant

    Now I see a key area! At line 453, there's a check for parameter count mismatch:

    if len(targetSig.parameters) != len(d.Parameters) {
    

    This is checking if the number of parameters in the pseudo type matches the actual type. For a method with a this parameter like tearDown(this: {state: T}): void, the checker's signature might not include this in its parameters array (since this is a special parameter), while the pseudochecker might include it.

    Let me verify this theory by looking at how the pseudochecker handles the this parameter:

  84. Assistant

    Let me look at the cloneParameters function more carefully to see how it handles the this parameter:

  85. Assistant

    Let me look at cloneParameters more carefully:

  86. Assistant

    Now I need to understand how the pseudo checker handles object literals. Let me look at how it processes the object literal returned from fromProviders:

  87. Assistant

    Now let me look at the typeFromObjectLiteral function more closely:

  88. Assistant

    Now let me look at how the checker handles the this parameter in signatures. Let me search for thisParameter in the checker:

  89. Assistant

    Let me look at how the checker creates signatures with this parameters:

  90. Assistant

    Let me look at how signatures are created to see if this is part of parameters:

  91. Assistant

    Let me look at how signatures are created with this parameters in the checker:

  92. Assistant

    Let me look at how the this parameter is set in signatures:

  93. Assistant

    Now I see the key issue! The Signature struct has parameters (without this) and thisParameter (separately). Let me verify that the pseudochecker is including the this parameter in its Parameters list. Let me look at how ParameterList() works:

  94. Assistant

    Let me look at the PseudoObjectMethod type and see how it stores parameters:

  95. Assistant

    Let me look at the PseudoTypeKindObjectLiteral case in pseudoTypeEquivalentToType more carefully. Specifically, I need to understand how the this parameter is handled in parameter comparison:

  96. Assistant

    Now I can see the bug! The issue is in the PseudoObjectElementKindMethod case (lines 446-482). When comparing parameter counts between the pseudo type and the target signature:

    Line 453: if len(targetSig.parameters) != len(d.Parameters) {

    The problem is that targetSig.parameters doesn't include the this parameter (it's stored separately in targetSig.thisParameter), but d.Parameters from the pseudo checker includes the this parameter as a regular parameter.

    Let me verify this by checking how the checker creates signatures for methods with this parameters:

  97. Assistant

    Let me look at line 10303 and the surrounding code where this parameters are handled when building signatures:

  98. Assistant

    Let me look at how the checker creates signatures for methods. Let me search for where thisParameter is assigned:

  99. Assistant

    Now I can see the root cause. In getSignatureFromDeclaration, lines 19718-19723:

    if i == 0 && paramSymbol.Name == ast.InternalSymbolNameThis {
        hasThisParameter = true
        thisParameter = param.Symbol()
    } else {
        parameters = append(parameters, paramSymbol)
    }
    

    The this parameter is stored separately in signature.thisParameter and NOT included in signature.parameters. However, the pseudo checker's cloneParameters includes all parameters from the AST, including the this parameter.

    Now let me check how the pseudochecker handles the this parameter in cloneParameters. The key issue is in the pseudoTypeEquivalentToType method when comparing PseudoObjectElementKindMethod:

    if len(targetSig.parameters) != len(d.Parameters) {
    

    For tearDown(this: {state: T}): void:

    • targetSig.parameters has 0 elements (this is stored separately)
    • d.Parameters has 1 element (includes this)

    This causes a mismatch! Let me also check how getTypeOfParameter handles the this parameter. But first, let me look at how the pseudo checker's ParameterList() is defined to understand if the this parameter is included.

  100. Assistant

    Let me check how ParameterList() works on function-like nodes:

  101. Assistant

    Let me look at how Parameters() works on nodes, and whether it includes the this parameter:

  102. Assistant

    Let me look at how Parameters() works:

  103. Assistant

    Let me search for the Parameters() function

  104. Assistant

    Let me search for IsThisParameter:

  105. Assistant

    Let me find the helper file

  106. Assistant

    Now I understand the issue. Let me trace through the code:

    1. In the checker's getSignatureFromDeclaration (checker.go:19710-19723), when iterating over the parameters, the this parameter is separated: it's stored in signature.thisParameter and NOT added to signature.parameters.

    2. In the pseudochecker's cloneParameters (lookup.go:691-716), it clones ALL parameters from nodes *ast.NodeList, which includes the this parameter. So the PseudoObjectMethod.Parameters includes the this parameter.

    3. In pseudoTypeEquivalentToType (pseudotypenodebuilder.go:453), it compares len(targetSig.parameters) with len(d.Parameters). Since targetSig.parameters doesn't include this but d.Parameters does, the count doesn't match.

    For the example:

    • tearDown(this: {state: T}): void {}
    • targetSig.parameters = [] (empty, this is in targetSig.thisParameter)
    • d.Parameters = [PseudoParameter for this: {state: T}] (length 1)

    So len(targetSig.parameters) (0) != len(d.Parameters) (1), which triggers the ReportInferenceFallback.

    The fix should be in the pseudoTypeEquivalentToType method for the PseudoObjectElementKindMethod case. We need to account for the this parameter.

    Looking at how the node builder's signatureToSignatureDeclarationHelper handles this:

    var thisParameter *ast.Node
    if b.ctx.flags&nodebuilder.FlagsOmitThisParameter != 0 {
        thisParameter = nil
    } else {
        thisParameter = b.tryGetThisParameterDeclaration(signature)
    }
    if thisParameter != nil {
        parameters = append([]*ast.Node{thisParameter}, parameters...)
    }
    

    So the this parameter is prepended to the parameter list. Similarly, in the pseudochecker, the this parameter would be the first parameter in d.Parameters.

    The fix should:

    1. Check if d.Parameters has a this parameter as the first element
    2. If so, compare it with targetSig.thisParameter instead3. Then compare the remaining parameters with targetSig.parameters

    Let me look at how to detect a this parameter in the pseudochecker context. The parameter's name node would be "this" and we can check if the name text is "this".

    Actually, looking at the AST, a this parameter has the special name this. In the checker, it's identified by paramSymbol.Name == ast.InternalSymbolNameThis and ast.IsThisParameter(parameters[0]).

    In the pseudochecker, the PseudoParameter.Name is the name node from the AST. For a this parameter, this would be a this keyword node.

    Let me check if there's a way to detect this in the pseudoTypeEquivalentToType method. We need to check if the first pseudo parameter is a this parameter, and if so, compare it with targetSig.thisParameter.

    Let me look at IsThisParameter:

  107. Assistant

    Now I understand the root cause. Let me trace through the code:

    1. In getSignatureFromDeclaration (checker.go:19718-19723), the this parameter is stored separately as thisParameter and NOT added to parameters.
    2. In pseudochecker's cloneParameters, ALL parameters from the AST are included, including the this parameter.
    3. In pseudoTypeEquivalentToType at line 453, the parameter count comparison fails because targetSig.parameters has 0 elements while d.Parameters has 1 element (the this parameter).

    Let me look at the PseudoObjectElementKindMethod case more carefully to implement the fix:

  108. Assistant

    Now let me also check the PseudoTypeKindSingleCallSignature case for the same issue:

  109. Assistant

    Now I understand the issue completely! Both the PseudoObjectElementKindMethod and PseudoTypeKindSingleCallSignature cases have the same problem. When a method has a this parameter:

    1. The pseudo checker's cloneParameters includes the this parameter in the parameter list
    2. The checker's signature.parameters does NOT include the this parameter (it's in signature.thisParameter)

    So when comparing parameter counts, they don't match, triggering ReportInferenceFallback.

    Let me look at how the pseudochecker stores parameters to see how to detect the this parameter:

  110. Assistant

    Now let me understand how the pseudochecker handles the this parameter. Let me look at cloneParameters again and the ast.IsThisParameter function:

  111. Assistant

    Now I have a clear understanding of the issue. Let me implement the fix. The problem is in pseudoTypeEquivalentToType in pseudotypenodebuilder.go:

    1. The pseudochecker's cloneParameters includes the this parameter in the parameter list
    2. The checker's signature.parameters does NOT include the this parameter (it's in signature.thisParameter)
    3. The parameter count comparison at line 453 (PseudoObjectElementKindMethod) and line 536 (PseudoTypeKindSingleCallSignature) fails

    Let me fix this by accounting for the this parameter in both cases:

  112. Assistant

    Now I need to implement the fix. The issue is in pseudoTypeEquivalentToType for both PseudoObjectElementKindMethod (line 446) and PseudoTypeKindSingleCallSignature (line 524). I need to account for the this parameter being stored differently between the pseudo checker and the real checker.

    Let me also check how ast.IsThisParameter works with the pseudochecker's parameter name node:

  113. Assistant

    Now I need to implement the fix. The key issue is that the pseudo checker's cloneParameters includes the this parameter in its parameter list, but the checker's signature stores it separately as thisParameter. I need to fix the comparison logic in pseudoTypeEquivalentToType for both PseudoObjectElementKindMethod and PseudoTypeKindSingleCallSignature cases.

    Let me implement the fix:

  114. Assistant

    Now let me also fix the PseudoTypeKindSingleCallSignature case:

  115. Assistant

    Now let me fix the PseudoTypeKindSingleCallSignature case similarly:

  116. Assistant

    Now let me check if the ast package is already imported in this file:

  117. Assistant

    Good, the ast package is already imported. Now let me test the fix by rebuilding and running the test case:

  118. Assistant

    Good, it builds. Now let me test the fix:

  119. Assistant

    The fix works. Now let me test with some edge cases to make sure the fix is robust:

  120. Assistant

    The only error is for the arrow function without a return type, which is expected. All the this parameter cases work correctly! Let me test more edge cases:

  121. Assistant

    All edge cases pass. Now let me run the existing tests to make sure we haven't broken anything:

  122. Assistant

    Let me also run the pseudochecker tests:

  123. Assistant

    Let me look for existing tests related to isolatedDeclarations:

  124. Assistant

    Let me search for tests related to this parameters in isolated declarations:

  125. Assistant

    Let me look for tests that involve this parameters with isolated declarations:

  126. Assistant

    Let me look for tests we should run:

  127. Assistant

    Let me run the checker tests:

  128. Assistant

    Good, all tests pass. Let me also run the transformers tests:

  129. Assistant

    All tests pass. Let me also verify the declaration emit output by generating the .d.ts file:

  130. Assistant

    The declaration output matches exactly what TypeScript 6.0 produces. Let me now check if there are any broader test suites we should run. Let me look at the test infrastructure:

  131. Assistant

    All tests pass. Let me check if there were any failures:

  132. Assistant

    All tests pass. Let me also look for any fourslash tests related to isolatedDeclarations:

  133. Assistant

    Let me search more broadly for fourslash tests related to isolatedDeclarations:

  134. Assistant

    Let me review the changes I made:

  135. Assistant

    The diff looks good. Let me clean up temporary files and do a final comprehensive test:

  136. Assistant

    Let me run the tests one more time to verify everything still passes:

  137. Assistant

    All tests pass. Let me clean up temporary files:

  138. Assistant

    Let me review the final state of the changes:

  139. Assistant

    Let me verify the final changes are correct by looking at both modified areas:

  140. Assistant

    The changes look good. Let me also look at the second modified area:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.