Skip to content
TheChatArchiveThe Chat Archive
Mistralmistral-medium-2505· Mistral AIHugging Face LMArena Human Preference 140K

I just researched oil processing in Factorio and found an oil patch quite further away…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Qwenqwen3-235b-a22b-no-thinking’s answer.
  1. User

    I just researched oil processing in Factorio and found an oil patch quite further away from my base. What's the best course of action here?

  2. Mistral Assistant

    When dealing with a distant oil patch in Factorio, you have several options depending on your current progress and resources. Here’s a structured approach to handling it efficiently:

    1. Assess the Distance and Resources

    • Check the oil patch size: If it's large (e.g., 1M+ oil), it may be worth investing in infrastructure. If it's small, consider whether it's worth the effort or if you should wait for a closer patch.
    • Measure the distance: If it's within ~50-100 tiles, trains or bots might not be necessary yet. If it's farther, consider automation.

    2. Early-Game Solutions (Pre-Trains/Bots)

    • Pipes + Pumps: If the distance is manageable, run pipes directly to your base. Use underground pipes to avoid clutter.
    • Barrels: Transport oil in barrels via belts or bots (if you have logistics bots). This is slow but works early on.
      • Use an assembler to fill barrels and another to empty them at your base.
    • Temporary Outpost: Set up basic oil processing (refineries, chemical plants) near the patch and transport products (plastic, sulfur, lubricant) via belts or bots.

    3. Mid-Game Solutions (Trains or Bots)

    • Trains (Best for Long Distances):
      • Build a train station near the oil patch with pumps to load crude oil into fluid wagons.
      • Set up a station at your base to unload oil into storage tanks or directly into refineries.
      • Use a circuit network to control pumps (e.g., only pump when tanks aren’t full).
    • Logistics Bots (If You Have Them):
      • Set up requester chests for barrels of oil and provider chests at the oil patch.
      • Use roboports to cover the distance (may require multiple roboports for long ranges).

    4. Late-Game Solutions (Advanced Automation)

    • Modular Oil Outpost: Build a self-sufficient oil processing facility near the patch and transport only the final products (e.g., plastic, sulfuric acid, lubricant) via trains or bots.
    • Nuclear Power + Oil: If you have nuclear power, you can afford to process oil on-site and transport only what you need.

    5. Defense Considerations

    • If the oil patch is in biter territory, set up defensive walls, turrets, and possibly artillery to protect your infrastructure.

    Recommended Approach

    • Short Distance (<50 tiles): Use pipes or belts with barrels.
    • Medium Distance (50-100 tiles): Use trains or a temporary outpost.
    • Long Distance (>100 tiles): Trains are the most efficient.

    Would you like help designing a specific setup (e.g., train station blueprint or barrel logistics)?

  3. User

    So would it be better to use trains to transport fluids from the oil patch area to my base or use pipelines? Because that's quite a distance between the oil patch and base

  4. Mistral Assistant

    The best choice between trains and pipelines depends on several factors, including distance, throughput needs, and your current tech level. Here’s a detailed comparison to help you decide:


    1. Pipelines (Direct Piping)

    ✅ Pros:

    • Simple & Cheap: No need for trains, fuel, or complex logistics.
    • No Loading/Unloading: Fluids flow continuously without manual intervention.
    • Good for Short-Medium Distances (~50–100 tiles): If the oil patch is within this range, pipes are viable.

    ❌ Cons:

    • Throughput Limits: Pipes have a maximum flow rate (~100 oil/sec per pipe, ~300/sec with underground pipes).
    • Lag & Clutter: Long pipe runs can cause performance issues and look messy.
    • Vulnerable to Biters: Pipes can be destroyed if not protected.
    • No Buffering: If your refineries stop consuming oil, pipes can back up.

    ⚙ When to Use Pipelines?

    • If the distance is <100 tiles and you don’t need extreme throughput.
    • If you’re still in early/mid-game and don’t have trains yet.

    2. Trains (Fluid Wagons)

    ✅ Pros:

    • High Throughput: A single fluid wagon can hold 25,000 units of fluid, and a train can carry multiple wagons.
    • Scalable: Easy to expand by adding more wagons or trains.
    • Flexible: You can transport crude oil, petroleum, heavy oil, or lubricant as needed.
    • Long-Distance Friendly: No performance impact from long distances.
    • Buffering: Trains act as a natural buffer—if your base isn’t consuming oil, trains wait at the station.

    ❌ Cons:

    • More Complex Setup: Requires train tracks, signals, and stations.
    • Fuel Costs: Trains need fuel (coal, solid fuel, or nuclear fuel).
    • Loading/Unloading Time: Pumps take time to fill/drain wagons.

    ⚙ When to Use Trains?

    • If the distance is >100 tiles (trains are far more efficient).
    • If you need high oil throughput (e.g., for advanced chemistry or large-scale plastic production).
    • If you already have a rail network set up.

    Best Approach for Your Situation

    Since your oil patch is quite far away, trains are almost certainly the better choice because:

    • Pipelines would be slow, laggy, and hard to defend over long distances.
    • Trains allow you to buffer oil and scale production easily.
    • You can transport multiple fluids (crude, petroleum, heavy oil) in the same train if needed.

    How to Set Up a Train-Based Oil Transport System

    1. Build a Train Station at the Oil Patch

      • Place pumps next to the oil wells.
      • Connect pumps to storage tanks (optional but helps with buffering).
      • Place a train stop and connect it to the tanks with underground pipes.
    2. Build a Train Station at Your Base

      • Place storage tanks near your refineries.
      • Connect the train stop to the tanks with pumps.
    3. Set Up the Train

      • Use fluid wagons (1–3 wagons per train is a good start).
      • Set the train schedule to:
        • Load at oil patch (wait condition: "Inactivity" or "Full cargo").
        • Unload at base (wait condition: "Empty cargo").
    4. Optional: Circuit Control

      • Use circuit conditions to disable pumps if tanks are full (prevents unnecessary train trips).

    Alternative: Hybrid Approach (Pipes + Trains)

    If you want to avoid trains for now, you could:

    • Process oil on-site (refineries near the patch).
    • Transport products (plastic, sulfur, lubricant) via trains or bots instead of raw oil.

    But for raw oil transport, trains are the best long-term solution.

    Would you like help designing a train station blueprint or setting up the circuit logic?

  5. User

    I finally got the train tracks close to the oil processing. What do you think it's best that I do now? Do I transport the fluid do the base or?

  6. Mistral Assistant

    Now that your train tracks are near the oil patch, you have a few good options depending on your needs. Here’s the best way to proceed:

    Option 1: Transport Raw Crude Oil to Base (Recommended for Most Cases)

    ✅ Best if:

    • You want flexibility (e.g., adjusting refinery ratios later).
    • You have space and power at your main base for refineries.
    • You’re still early/mid-game and want to keep things simple.

    How to Do It:

    1. Set up a loading station at the oil patch:

      • Place storage tanks near the oil wells (optional but helps buffer oil).
      • Connect pumps from the wells to the tanks.
      • Place a train stop and connect it to the tanks with underground pipes.
      • Use fluid wagons (1–3 per train is a good start).
    2. Set up an unloading station at your base:

      • Place storage tanks near your refineries.
      • Connect the train stop to the tanks with pumps.
      • Use circuit conditions (optional) to disable pumps if tanks are full.
    3. Configure the train:

      • Schedule: Oil Patch → Base → Oil Patch (loop).
      • Wait conditions:
        • At oil patch: "Wait until full" (or "Inactivity" if using tanks).
        • At base: "Wait until empty" (or "Inactivity").

    ⚠ Watch out for:

    • Throughput bottlenecks (if your refineries can’t process oil fast enough, trains may back up).
    • Biter attacks (defend your oil outpost with walls/turrets).

    Option 2: Process Oil On-Site & Transport Products (Advanced)

    ✅ Best if:

    • You want to minimize train trips (e.g., transporting plastic instead of crude oil).
    • You have limited space/power at your main base.
    • You’re late-game and want to optimize logistics.

    How to Do It:

    1. Build refineries at the oil patch:

      • Set up basic oil processing (crude → petroleum/heavy oil).
      • Optionally, add advanced oil processing and cracking if needed.
    2. Transport refined products (plastic, sulfur, lubricant) via trains or bots:

      • Use cargo wagons (for barrels) or fluid wagons (for liquids like lubricant).
      • Alternatively, use logistics bots if you have a roboport network.

    ⚠ Watch out for:

    • Complexity (more setups to manage).
    • Inflexibility (harder to adjust ratios later).

    Which Option Should You Choose?

    • If you’re still expanding your base and want simplicity → Transport raw crude oil.
    • If you’re optimizing for efficiency and have space at the oil patch → Process on-site.

    Bonus Tip: Hybrid Approach

    • Start by transporting crude oil to your base.
    • Later, if you need more efficiency, add some on-site processing (e.g., turn heavy oil into lubricant before transporting).

    Would you like help with a specific part, like train scheduling or refinery setups?

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.