I just researched oil processing in Factorio and found an oil patch quite further away…
- User
I just researched oil processing in Factorio and found an oil patch quite further away from my base. What's the best course of action here?
Assistant
When you find an oil patch far from your base in Factorio, and you're ready to start processing it, there are several factors to consider when planning the best course of action. Here's a structured approach:
🔧 1. Assess Your Current Needs
Before setting up a full oil operation, ask yourself:
- Are you already processing oil near your base?
- How much oil do you need per second (e.g., for plastic, advanced circuits, rocket fuel)?
- Do you want basic oil products (petroleum, solid fuel), or are you aiming for advanced processing like lubricant, sulfuric acid, or rocket fuel?
🚶♂️ 2. Decide: Bring Oil to Base or Build Remote Refinery?
There are two main approaches:
✅ Option A: Pump Oil to Base via Pipeline
Pros:
- Simple setup.
- Centralized control.
- No need to power or maintain a remote base.
Cons:
- Long pipelines take time and steel to build.
- Slower flow over long distances (fluids move slower than belts).
- Harder to expand later if you want more complex processing.
Use this if: You only need basic oil → heavy/light/petroleum conversion and can handle all refining at your main base.
✅ Option B: Build a Remote Oil Processing Plant
Pros:
- More efficient use of resources (can crack heavy to light, etc.).
- Can pre-process before sending to base.
- Scales better for large-scale operations.
Cons:
- Requires power, modules, and maintenance.
- Takes more time and materials to set up initially.
Use this if: You’re going for high throughput, cracking, or late-game science/rocket production.
⚙️ 3. Set Up the Remote Oil Processing Plant (If Applicable)
Here’s how to do it efficiently:
🛠️ Step-by-step:
-
Place Pumpjacks on all oil patches.
-
Connect them to storage tanks to buffer crude oil output.
-
Use pumps to feed into pipes heading to:
- Oil refineries (for basic or advanced processing)
- Chemical plants (for cracking or making lube, sulfuric acid, etc.)
-
Power the site with solar panels + accumulators or a medium voltage power line from your base.
-
Pipe or pump the final products (light oil, petroleum gas, lubricant) back to your base.
-
Optionally, use rail transport if distance is extreme or pipelines get too cumbersome.
📦 4. Transport Options
Method Best For Pipelines Short to mid-distance, few fluids Trains Long distance, high volume, multiple fluids Belts (barrels) Emergency backup, not ideal for regular use 🚂 For very distant oil fields, trains are often superior due to speed and capacity.
🧠 5. Optimize with Modules & Beacons (Late Game Only)
Once you have the tech:
- Use Productivity Modules in refineries for more output.
- Add Beacons with Speed Modules around chemical plants to boost throughput.
This reduces the number of buildings needed and saves space at the remote site.
🗺️ 6. Consider Future Expansion
Ask yourself:
- Will this be your main oil source?
- Do you plan to build more oil patches?
- Is this site close to future megabase expansions or train lines?
Plan enough space and flexibility to scale up without tearing down and rebuilding.
🛡️ 7. Defend It (Optional)
If playing with biters enabled:
- Place walls, turrets, or laser turrets around the installation.
- Consider radar coverage and periodic patrols.
🧩 Example Setup (Remote Advanced Processing)
[Oil Patch] ↓ [Pumpjack] → [Storage Tank] → [Pump] → [Refineries] ↓ [Chemical Plants (cracking)] ↓ [Storage/Pumps to Base]
🏁 Summary: Best Course of Action
✅ If you're early game:
- Use pipelines to bring crude oil to your base.
- Use basic oil processing.
✅ If you're mid-to-late game:
- Build a remote refinery.
- Include heavy/light cracking and lubricant/sulfuric acid production.
- Use trains to return refined products to base.
✅ Always:
- Buffer with storage tanks.
- Plan for future expansion.
- Optimize with modules/beacons when available.
Let me know what stage you're at in the game, and I can give a more tailored blueprint!
- User
So would it be better to use trains to transport fluids from the oil patch area to my base or use pipelines? Because that's quite a distance between the oil patch and base
Assistant
Great question! When you're dealing with a long distance between an oil patch and your base, choosing between trains and pipelines depends on your current stage in the game, how much oil you need, and how much effort you want to invest upfront.
Let’s break it down:
🚆 Train Transport (Recommended for Long Distances)
✅ Pros:
- High throughput: A single train can carry massive amounts of fluid.
- Distance-independent speed: Whether it's 100 or 1000 tiles, trains arrive at the same time.
- Flexible: Can transport multiple fluids (crude oil, heavy/light/petroleum gas, even sulfuric acid).
- Scalable: Add more trains or wagons as demand increases.
- Less material-intensive long-term: No need for hundreds of pipes and undergrounds.
❌ Cons:
- Higher initial setup cost: Locomotives, cargo wagons (fluid wagons), rails, stations, signals.
- Requires basic rail logistics knowledge.
- Slight delay between deliveries (but negligible with proper scheduling).
🔧 Setup Tips:
- Use fluid wagons (not barrels unless necessary).
- Build pump stations at both ends:
- One at the oil field to pump crude into the train.
- One at your base to unload into storage tanks.
- Use buffer tanks at both ends to keep pumps running smoothly.
- Set up train schedules with wait conditions based on tank levels for automation.
🎯 Best use: Late-game or when the oil patch is very far away (500+ tiles).
🛢️ Pipeline Transport
✅ Pros:
- Simple to set up: Just lay pipe from point A to B.
- No fuel or power needed for pipes themselves (only pumps if needed).
- Fully automated once connected.
- Great for short-to-medium distances.
❌ Cons:
- Fluids flow slowly over long distances.
- Huge material cost for long-range underground pipes.
- Harder to scale: adding more throughput requires parallel pipelines.
- No way to send multiple fluids without separate lines or barrel + belt workaround.
🔧 Setup Tips:
- Use pumps every 20–30 segments to maintain flow speed.
- Use storage tanks at both ends to buffer supply.
- Consider cracking at the remote site before sending lighter fluids back.
🎯 Best use: Early-to-mid game, short-to-medium distances (<300 tiles), or small-scale operations.
🧠 Decision Summary: Which Is Better?
Factor Pipelines Trains Distance Short/Mid Any Throughput Low/Med Very High Material Cost High (steel/pipe) High (rail/engines/wagons) Scalability Hard Easy Multi-fluid support No (need parallel pipes) Yes Automation Full Full Initial Effort Low-Medium Medium-High
🏁 Your Situation: Long Distance → Trains Are Better
Since you said the oil patch is "quite further away", trains are likely the better option, especially if:
- You’re mid-to-late game.
- You plan to process more than just crude oil (e.g. cracking, lubricant, rocket fuel).
- You expect high demand for oil products.
📦 Bonus Tip: Hybrid Approach
You can also do a hybrid system:
- Process oil remotely (refining + cracking).
- Send only light oil or petroleum gas back via train — they have higher energy density per wagon.
- This reduces the number of trains needed and maximizes efficiency.
🗺 Want a Blueprint?
If you’d like, I can give you a full blueprint for:
- A remote oil processing plant
- With train loading/unloading stations
- Ready for high-throughput delivery to your base
Just let me know what version of Factorio you're using and whether you want vanilla or modded suggestions!
Would you like that blueprint now?
- User
I finally got the train tracks close to the oil processing. What do you think it's best that I do now? Do I transport the fluid do the base or?
Assistant
Great! You've made solid progress by getting train tracks close to the oil patch — that’s a key milestone. Now it's time to build your fluid train system to transport crude oil (or refined products) from the remote oil site to your base.
Here’s a step-by-step plan of what to do next, depending on your current stage and needs:
🧭 Step 1: Decide What to Transport
Before building anything, decide whether you want to:
- Transport crude oil to your base for processing.
- Or process oil remotely and transport more valuable fluids like:
- Light oil
- Petroleum gas
- Lubricant
- Sulfuric acid
✅ Recommended: Process Remotely, Then Ship Valuable Fluids
Why?
- Less volume to move = fewer trains needed.
- You can crack heavy → light and light → petroleum at the remote site.
- Saves space and complexity in your main base.
🛠 Step 2: Build a Remote Oil Processing Plant
If you haven’t already:
🔧 Required Buildings:
- Pumpjacks on the oil patch
- Storage tanks to buffer input and output
- Oil refineries (3–6 minimum)
- Chemical plants for cracking or making lubricant/sulfuric acid
- Pumps to control fluid flow into storage tanks and fluid wagons
⚙️ Setup Example (Remote Refinery):
[Oil Patch] ↓ [Pumpjack] → [Storage Tank A] → [Refineries] → [Chemical Plants] ↓ [Storage Tank B] → [Fluid Wagons]You can use productivity modules later to optimize this setup.
🚆 Step 3: Set Up Train Loading Station
Now that you have fluids ready, load them onto a train!
🏗 Build:
- At least 1 fluid wagon (more if high demand).
- Pumps between storage tank(s) and wagon.
- Rail signal to control when the train leaves.
💡 Tip: Use storage tanks before the wagon so pumps always have something to push — prevents slow loading.
🛤 Step 4: Set Up Unloading Station at Base
At your base, mirror the setup:
- Fluid wagon → pumps → storage tanks
- From there, connect to your processing lines.
📋 Step 5: Configure the Train Schedule
Use schedule-based automation to make the train run only when needed.
🎯 Sample Schedule:
- Go to oil station
- Wait until tank is full (e.g., "Wait until Petroleum gas ≥ 20k")
- Go to base station
- Empty fluid wagon
- Repeat
Or use circuit conditions with combinators/logistics to trigger the train only when needed.
🔌 Bonus: Power the Site
Remote sites need power. Choose one:
- Solar panels + accumulators (clean, no maintenance)
- Medium voltage power line from your base (good for large setups)
Add a radar so you can see the site on your map.
🧱 Optional: Defend It
If biters are active:
- Add walls and turrets around the site.
- Place some ammo/repair packs nearby in a chest.
🧩 Want a Blueprint?
I’d be happy to provide a ready-to-use blueprint for:
✅ A complete remote oil refinery with train loading
✅ Configured for:
- Basic or advanced oil processing
- Cracking
- Lubricant production
- Automatic train loading
Just tell me:
- Factorio version
- Vanilla or modded?
- How many fluid wagons/trains you want to support
Would you like that blueprint now?
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.