Skip to content
TheChatArchiveThe Chat Archive
Qwenqwq-32b· Alibaba (Qwen)Hugging Face LMArena Human Preference 140K

on "bosch indego M+ 700" what size screws are used to fasten the cutting blades?

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-flash-preview-04-17’s answer.
  1. User

    on "bosch indego M+ 700" what size screws are used to fasten the cutting blades?

  2. Qwen Assistant

    The Bosch Indego M+ 700 uses M5 x 16mm screws to fasten its cutting blades. Here are the critical details:


    Screw Specifications:

    1. Thread Size:

      • M5 (metric thread, 5mm diameter).
      • Length: 16mm (total length, including the head).
    2. Head Type:

      • Most commonly Torx (T20 or T25) or Phillips (PH2) head screws.
      • Verify the exact head type by inspecting the screws on your mower.
    3. Material:

      • Typically stainless steel or hardened steel to withstand vibration and wear.

    Key Notes for Blade Modifications (e.g., Lowering Cutting Height):

    1. Spacer Compatibility:

      • If you want to lower the cutting height, you’ll need longer screws to accommodate spacers (e.g., nylon washers).
      • For example, adding a 2mm spacer would require M5 x 18mm or 20mm screws (original 16mm + spacer thickness + extra thread engagement).
    2. Safety Precautions:

      • Always remove the battery and ensure the mower is powered off before working on blades.
      • Test blade clearance manually by rotating the blade after adding spacers to avoid contact with the mower housing.
    3. Thread Locker:

      • Original screws may use thread-locking compound (e.g., Loctite). Reapply it if reusing screws to prevent loosening.
    4. Warranty Warning:

      • Modifying the mower’s default settings (e.g., cutting height) voids the warranty and risks damage to the mower or injury.

    Where to Buy Replacement Screws:

    • Hardware stores: Look for M5 x 16mm machine screws (or longer for modifications).
    • Online:
      • Amazon, McMaster-Carr, or fastener retailers (search for "M5 x 16mm Torx machine screw" or "M5 x 20mm Phillips screw").
    • Bosch Service: Contact Bosch for OEM parts (though they may not sell individual screws).

    Why This Matters:

    The M5 x 16mm screws are critical for securing the blade disc to the mower’s motor housing. Using the wrong screws could lead to blade detachment, motor damage, or uneven cuts. If lowering the cutting height, ensure the longer screws and spacers are non-conductive (e.g., nylon) to avoid electrical shorts.

    Let me know if you need help calculating spacer thickness or locating parts! 🔧

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.