Skip to content
The Chat Archive
gpt-4.1-2025-04-14· OpenAI LMArena Human Preference 140K

on "bosch indego M+ 700" what size screws are used to fasten the cutting blades?

  1. User

    on "bosch indego M+ 700" what size screws are used to fasten the cutting blades?

  2. Assistant

    For the Bosch Indego M+ 700 robotic lawnmower, the screws used to fasten the cutting blades are typically:

    • Type: Torx screws (often T20 or T25 head)
    • Size: M5 x 10 mm (metric, 5 mm diameter, 10 mm length)
    • Thread: Standard metric thread (M5)
    • Material: Usually stainless steel or hardened steel for durability

    Note:

    • The exact size can vary slightly depending on the production batch or region, but M5 x 10 mm is the most commonly reported size for Bosch Indego models, including the M+ 700.
    • Always use the original or manufacturer-recommended screws to ensure safety and proper operation. Using incorrect screws can lead to blade detachment or mower damage.

    If you are replacing the screws:

    • Use M5 x 10 mm Torx head screws (preferably stainless steel).
    • If you are planning a modification (such as adding a spacer), increase the length of the screw by the thickness of your spacer (e.g., for a 5 mm spacer, use M5 x 15 mm).

    Tip:
    If you want to be 100% certain, you can remove one of the original screws and measure it, or refer to the mower’s user manual or parts diagram.

    Safety Reminder:
    Always disconnect the mower’s battery and follow safety instructions before working on the blades.

    If you need the official Bosch part number for the screws, let me know!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.