Hi I have Hikvision DS-9664NI-M8 and i have just unplugged the harddrives out of the…
- User
Hi I have Hikvision DS-9664NI-M8 and i have just unplugged the harddrives out of the system. Now I want to replug them since I want to check back a recording using the device. Given no array functioning is used does it matter if i plug them back to different slots of the machine? Do system can still use any other mechanism to make me inable to do that
Assistant
When you unplug and replug hard drives in your Hikvision DS-9664NI-M8 NVR, the slot placement can matter depending on how the system tracks and manages the drives.
Even without RAID configuration, many NVR systems create a logical mapping between specific drive slots and their internal database. The DS-9664NI-M8 likely stores metadata about which recordings are on which drive, indexed by the slot position. If you mix up the drive positions, the system may not be able to locate the recordings properly.
Here's what typically happens:
- The NVR assigns each drive a unique identifier based on its slot position
- Recording indexes reference these slot-based identifiers
- Swapping drives to different slots can break these references
To safely access your recordings, I'd recommend:
- Try to remember the original slot positions and replug the drives accordingly
- If you can't remember, plug them in and check if the system recognizes the drives and recordings
- If recordings aren't accessible, try different slot combinations
- The system should eventually recognize the drives even in wrong slots, but it may take time to rebuild the database
Most modern Hikvision NVRs are fairly resilient and will attempt to re-index drives if they detect a mismatch, but this process can take time and isn't guaranteed to work perfectly. The safest approach is always to maintain the original slot configuration when possible.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.