Once, after charging my headphones via the usb port in my pc (i usually use a plug) my…
- User
Once, after charging my headphones via the usb port in my pc (i usually use a plug) my headphones turned off without the shutoff sound randomly. since then, when i turn them on, it plays the startup sound and the battery then turns off without any sound with it except a small click/pop maybe, sometimes it gets up to it saying "pixel 8 pro conne-" then turns off. when it does eventually stay on after several attempts it doenst connect to the phone no matter what, warranting another restart. by luck it occasionally turns on and connects as it should. What's the most likely cause for this?
- Assistant
From your description, it sounds like your headphones began acting up after being charged via your PC's USB port rather than your usual wall charger. The behavior you're describing includes:
- Turning off abruptly without a shutdown sound
- Occasionally playing the startup sound but shutting off soon after
- Sometimes partially announcing a connection ("Pixel 8 Pro conne-") before turning off
- Only occasionally staying on and connecting properly — seemingly based on luck
These symptoms point toward a power or firmware issue, possibly worsened or triggered by charging via the PC. Here are some likely causes and how to troubleshoot:
🔌 1. Battery or Power Management Issue (Most Likely)
The fact that the headphones shut off shortly after startup (often before completing a connection) strongly suggests that the battery is either malfunctioning or its charge reporting system has been disturbed.
- When charged via a PC USB, the headphones might not have received the correct voltage/current, or the charge cycle was interrupted or poorly regulated.
- This could confuse the battery management system (BMS) into misreporting or mismanaging power.
💡 Troubleshooting Steps:
- Fully drain the battery if you can. Leave the headphones on (if they stay on) or keep attempting until they stop even trying to power up.
- Then charge fully using your original plug adapter, not the PC. Let them charge for 2–3 hours even if the indicator suggests they’re already charged.
- Try a reset or power cycle (often involves holding Power + Volume Down or similar — check your headphone model's manual for specifics).
- If the headphones have a status app, check it from your phone or PC for firmware updates or battery stats.
🧠 2. Corrupted Firmware or Boot Failure
The partial startup sound (“Pixel 8 Pro conne-”) implies the headphones begin the boot process but crash midway. That could be due to boot code issues, possibly introduced by a failed charge handshake or EMI (Electromagnetic Interference) from the PC's USB port.
💡 Troubleshooting:
- Update the firmware using the manufacturer's app or software (e.g., Bose Connect, Sony Headphones Connect, etc.).
- If they don't stay on long enough to update via Bluetooth, try updating via USB on a PC using the official updater tool (some brands offer this).
🔋 3. Deep Discharge or "Ghost Charge" Bug
Some headphones falsely register as having a full or partial charge after being connected to a lower-power USB port (like from a PC), even though the battery is really too low to function. This mismatch can cause weird behaviors on startup and during Bluetooth connection.
💡 Troubleshooting:
- Leave the headphones charging on a high-quality wall outlet overnight.
- Try turning them on while plugged in (if possible), to see if the issue disappears with external power.
📱 4. Bluetooth Pairing or Chip Crash
The crash occurring right after it starts connecting to your Pixel 8 Pro could point to a Bluetooth chip or stack crash on the headphones’ side — possibly being disrupted by faulty power delivery or corrupt firmware.
💡 Try:
- Forget the headphones on your Pixel 8 Pro.
- Try pairing with a different device (e.g., laptop, tablet) to see if the issue reoccurs.
- Perform a factory reset of the headphones to clear any corrupted pairing data.
🚩 Summary: Most Likely Cause
The battery and power management system was likely confused or disrupted by charging via your PC’s USB port, which may provide inconsistent or insufficient power compared to a regular wall adapter. This might have caused:
- Erratic power state behavior
- Incomplete boot/pair cycles
- Firmware glitching
✅ Final Recommendations
- Fully drain and recharge via wall adapter only.
- Reset the headphones (check user guide for steps).
- If possible, update firmware.
- Avoid charging from PC USB ports going forward.
- If it's under warranty, contact the manufacturer — describe the issue and mention that it happened after USB charging.
Let me know the brand/model for more tailored steps!
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-3-5-haiku-20241022Compare side by side →
gemma-3-27b-itCompare side by side →
gemini-2.5-flash-preview-04-17Compare side by side →
claude-opus-4-20250514Compare side by side →
claude-3-7-sonnet-20250219-thinking-32kCompare side by side →
claude-opus-4-20250514Compare side by side →
gemini-2.5-flash-preview-04-17Compare side by side →
llama-4-maverick-03-26-experimentalCompare side by side →
qwen3-235b-a22b-no-thinkingCompare side by side →
mistral-medium-2505Compare side by side →
qwq-32bCompare side by side →