Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-opus-4-20250514· AnthropicHugging Face LMArena Human Preference 140K

Once, after charging my headphones via the usb port in my pc (i usually use a plug) my…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-flash-preview-04-17’s answer.
  1. User

    Once, after charging my headphones via the usb port in my pc (i usually use a plug) my headphones turned off without the shutoff sound randomly. since then, when i turn them on, it plays the startup sound and the battery then turns off without any sound with it except a small click/pop maybe, sometimes it gets up to it saying "pixel 8 pro conne-" then turns off. when it does eventually stay on after several attempts it doenst connect to the phone no matter what, warranting another restart. by luck it occasionally turns on and connects as it should. What's the most likely cause for this?

  2. Claude Assistant

    This sounds like a corrupted firmware or bootloader issue, likely triggered by the USB charging from your PC. Here's what probably happened:

    When you charged via your PC's USB port, the headphones may have received an unstable power supply or data signal that interrupted their normal operation. This can corrupt the device's firmware or damage the boot sequence, causing the symptoms you're describing - the incomplete startup sequence, immediate shutdowns, and connection failures.

    The pattern you're describing (startup sound → immediate shutdown with click/pop, or partial "Pixel 8 pro conne-" before cutting out) strongly suggests the headphones are failing during their initialization process. The fact that it occasionally works after multiple attempts indicates the core hardware is likely fine, but the software/firmware is unstable.

    Other possibilities include:

    • A failing battery that can't maintain voltage during the power-hungry startup sequence
    • Corrupted Bluetooth pairing data that's causing crashes during connection attempts
    • A damaged power management chip from voltage irregularities

    To fix this, try:

    1. Fully draining the battery (leave them attempting to turn on until completely dead)
    2. Charging them with the original wall charger to 100%
    3. Looking for a factory reset procedure for your specific headphone model
    4. Checking if the manufacturer has a firmware update tool

    If these don't work, the firmware corruption may be too severe for user-level fixes and might need professional repair or replacement.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.