Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-sonnet-4-20250514· AnthropicHugging Face LMArena Human Preference 140K

How to save configuration in ISW-24W-4X CLI?

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Coherecommand-a-03-2025’s answer.
  1. User

    How to save configuration in ISW-24W-4X CLI?

  2. Claude Assistant

    To save configuration in ISW-24W-4X CLI, you typically use one of these commands:

    Primary save command:

    copy running-config startup-config
    

    Alternative commands that may work:

    write memory
    

    or

    write
    

    Steps:

    1. Enter privileged EXEC mode if not already there:

      enable
      
    2. Save the configuration:

      copy running-config startup-config
      
    3. You should see a confirmation message indicating the configuration has been saved.

    The exact command syntax can vary slightly depending on the firmware version of your ISW-24W-4X switch. If the above commands don't work, try checking the help system with ? or help to see available save options.

    Make sure to save your configuration regularly, especially after making important changes, as the running configuration is stored in volatile memory and will be lost if the switch loses power without being saved.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.