On my umc204hd from Behringer I wanna plug in 2 mics and switch between them to my PC.…
- User
On my umc204hd from Behringer I wanna plug in 2 mics and switch between them to my PC. How do I do that?
- Assistant
The UMC204HD has two XLR/TRS combo inputs, so you can plug both mics in simultaneously. Here's how to set it up:
Hardware setup:
- Plug your first mic into Input 1 (left combo jack)
- Plug your second mic into Input 2 (right combo jack)
- If using condenser mics, press the +48V phantom power button
- Adjust the gain knobs for each mic independently
In your recording software (DAW): You'll see both inputs available as separate channels. To switch between them:
- Arm/disarm the track you want to record from
- Mute/unmute the channels as needed
- Or use the solo button to isolate one mic
For live switching (like streaming/calls): Since the UMC204HD doesn't have a hardware switch between inputs, you'll need software routing:
- Use OBS Studio's audio mixer to select which input is active
- Use a virtual audio cable app like VoiceMeeter to create a switchable setup
- Or use your streaming/communication software's input selection to choose between "UMC204HD Input 1" and "UMC204HD Input 2"
The interface itself always sends both inputs to your PC simultaneously - the switching happens in software. Most apps will let you select which specific input (1 or 2) you want to use.
- User
When using such an audio interface to i connect my headphones to the PC as usual or do I need to route my in-game audio and stuff through the interface?
- Assistant
You'll want to connect your headphones to the UMC204HD interface, not your PC. Here's why and how:
Connect headphones to the interface:
- Plug into the front panel headphone jack (1/4" / 6.35mm)
- Use the phones knob to control volume
Why route everything through the interface:
- Zero-latency monitoring - You can hear your mic input in real-time without delay
- Better audio quality - The UMC204HD's DAC is likely better than your motherboard's
- Simplified setup - Everything (mics + game audio) goes through one device
- Mix control - The "Mix" knob lets you blend between direct mic monitoring and computer audio
Windows setup:
- Set the UMC204HD as your default playback device in Windows Sound settings
- All PC audio (games, music, Discord, etc.) will now route through the interface
- Your game audio comes through the same headphones as your mic monitoring
The signal flow:
- Mics → Interface inputs → PC for recording/streaming
- PC audio (games, etc.) → Interface outputs → Your headphones
This is the standard way to use an audio interface - it becomes your computer's main sound card for both input and output. You could technically use separate devices, but you'd lose the benefits of direct monitoring and have a more complicated setup.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.