Skip to content
The Chat Archive
deepseek-r1-0528· DeepSeek LMArena Human Preference 140K

On my umc204hd from Behringer I wanna plug in 2 mics and switch between them to my PC.…

  1. User

    On my umc204hd from Behringer I wanna plug in 2 mics and switch between them to my PC. How do I do that?

  2. Assistant

    To switch between two microphones connected to your Behringer UMC204HD audio interface on a PC, follow these steps:

    1. Physical Setup

    • Connect Mics:
      Plug Mic 1 into Input 1 (XLR) and Mic 2 into Input 2 (XLR) on the UMC204HD.
      [image: UMC204HD Inputs] open
    • Enable Phantom Power (If Needed):
      Press the 48V button if using condenser mics (this powers both inputs).
    • Set Gain Levels:
      Adjust the GAIN knobs for each mic (aim for consistent volume levels).

    2. Software Configuration

    Option A: Switch via Recording Software (Manual Toggle)

    • Set Inputs in Software:
      Most apps (Zoom, OBS, Audacity, Discord) let you select the microphone channel:
      • Mic 1 (Mono Left): Select UMC204HD 1-2 → Channel 1 (Left).
      • Mic 2 (Mono Right): Select UMC204HD 1-2 → Channel 2 (Right).
        (Toggle this setting in your app when switching mics.)

    Option B: Use a Virtual Mixer (Automated Switching)

    Windows: Use Voicemeeter (Free)

    1. Install: Download Voicemeeter.
    2. Configure:
      • Open Voicemeeter → Set Hardware Input 1 to UMC204HD (1+2).
      • Click the gear icon → Select Input 1 = Left, Input 2 = Right.
      • Assign A1 (virtual output) to your headphones/speakers.
    3. Route Mics:
      • Mic 1: Enable B1 (Bus 1) for Hardware Input 1 (Left).
      • Mic 2: Enable B2 (Bus 2) for Hardware Input 1 (Right).
        [image: Voicemeeter Setup] open
    4. Set Default Device:
      • In Windows Sound Settings, set Voicemeeter Output as the default microphone.
    5. Switch Mics Instantly:
      • Toggle B1 (Mic 1) or B2 (Mic 2) in Voicemeeter to mute/unmute each mic.

    macOS: Use Loopback (Paid) or GarageBand (Free)

    • Loopback: Create virtual devices for each mic and switch between them.
    • GarageBand: Create tracks for each mic, then mute/unmute tracks to switch.

    3. Advanced: Hardware Solution

    If you prefer physical switching, add an XLR switcher between the mics and interface:

    • Connect both mics to a switcher like ARTcessories AB Switch.
    • Plug the switcher’s output into Input 1 of the UMC204HD.
    • Press the switcher’s button to toggle between mics.

    Troubleshooting

    • No Sound?
      • Check Windows/macOS sound settings: Ensure UMC204HD or Voicemeeter Output is the default input.
      • Test mics individually by soloing channels in Voicemeeter or your DAW.
    • Phantom Power Issues:
      Ensure the 48V button is lit (only for condenser mics).

    This setup lets you seamlessly switch mics either digitally (via software) or physically (with a switcher). Let me know if you need more details! 🎤

  3. User

    When using such an audio interface to i connect my headphones to the PC as usual or do I need to route my in-game audio and stuff through the interface?

  4. Assistant

    When using the Behringer UMC204HD, you have two options for headphone audio:


    Option 1: Route ALL PC Audio Through the Interface (Recommended)

    Why?

    • Your interface has a high-quality DAC (better sound than your PC’s built-in audio).
    • Zero-latency monitoring lets you hear your mic + PC audio together in real-time.
    • Simplifies setup (one device for everything).

    How to Set Up:

    1. Connect headphones to the UMC204HD’s 6.35mm (1/4") headphone jack (front panel).
    2. Set UMC204HD as default audio device:
      • Windows:
        • Right-click the speaker icon → Sound Settings → Set Output to "UMC204HD".
      • macOS:
        • System Settings → Sound → Set Output to "UMC204HD".
    3. Adjust volume:
      • Control PC/game volume via your OS or apps.
      • Fine-tune headphone level with the PHONES knob on the interface.

    Pros:
    ✅ Superior audio quality for games/music.
    ✅ Hear yourself + game audio together with no delay.
    ✅ No extra software needed.

    Cons:
    ❌ Must use interface’s headphone jack (not PC front panel).


    Option 2: Keep Game Audio on PC, Mics on Interface (Hybrid Setup)

    Use this if:

    • You prefer plugging headphones into your PC (e.g., for convenience).
    • You only need the interface for mic input.

    How to Set Up:

    1. Plug headphones into your PC (as usual).
    2. Set mic input to UMC204HD:
      • In Windows/macOS sound settings, set Input to "UMC204HD" (or a virtual mixer like Voicemeeter).
    3. Set output to your PC’s headphone jack.

    Pros:
    ✅ Use existing headphone port on PC/laptop.
    ✅ Simpler if you don’t need high-fidelity audio.

    Cons:
    ❌ Can’t monitor your mic in real-time (you’ll hear yourself with a slight delay).
    ❌ Lower audio quality for games/music.


    Critical Notes

    1. Latency Monitoring:

      • If using Option 1, press the DIRECT MONITOR button on the UMC204HD. This mixes your mic(s) + PC audio instantly (no lag).
      • Disable monitoring in apps like Discord to avoid echo.
    2. Game/App Settings:

      • Set the output device to UMC204HD (if using Option 1).
      • Set the input device to UMC204HD 1-2 (for mics).
    3. Troubleshooting:

      • No audio in headphones?
        • Check Windows/macOS output device settings.
        • Increase the PHONES knob on the interface.
      • Can’t hear your mic?
        • Enable DIRECT MONITOR on the UMC204HD + check gain levels.

    Which Should You Choose?

    • For streaming/gaming: Option 1 (all audio through interface) is ideal. You’ll get pro audio quality and real-time mic monitoring.
    • For casual calls: Option 2 works if you don’t mind delayed mic feedback.

    ⚠️ Never connect headphones to BOTH your PC and interface simultaneously — this causes conflicts. Pick one output!

    Let me know if you’re setting up for streaming/gaming — I’ll share app-specific tips! 🎧

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.