UnetLoaderGGUF Any Switch (rgthree) easy cleanGpuUsed GetImageSize+ FileNamePrefix…
- User
UnetLoaderGGUF Any Switch (rgthree) easy cleanGpuUsed GetImageSize+ FileNamePrefix DualCLIPLoaderGGUF Fast Groups Bypasser (rgthree) SDXLEmptyLatentSizePicker+ Seed (rgthree) Calculation [Dream] easy float UltimateSDUpscale
When loading the graph, the following node types were not found
이렇게 에러가 발생하고 있는데, compyui에서 뭘 해야함?
- Assistant
이 에러 메시지는 ComfyUI에서 그래프를 로드할 때 필요한 특정 노드(Node)가 설치되지 않았거나, 찾을 수 없음을 의미합니다. 각 노드 타입을 설치하거나 활성화해야 합니다. 아래 단계를 따라 문제를 해결해 보세요:
1. 필요한 커스텀 노드 설치하기
에러 메시지에 언급된 노드들은 대부분 ComfyUI의 커스텀 확장 기능입니다. 다음 단계를 통해 설치하세요:
가.
comfyui/custom_nodes/폴더 확인ComfyUI의
custom_nodes/폴더에 다음 레포지토리가 설치되어 있는지 확인하세요:- rgthree/comfyui-utils:
Seed,Any Switch,Fast Groups Bypasser등 rgthree의 노드 포함. - BLaCKLo0p/comfyui_loadsave_nodes:
UnetLoaderGGUF,DualCLIPLoaderGGUF등 포함. - Coyyu/ComfyUI-UltimateSDUpscale:
UltimateSDUpscale포함. - fabiocaccamo/comfyui-file-nodes:
FileNamePrefix등 파일 관련 노드 포함.
나. 설치 방법
터미널에서 ComfyUI 폴더로 이동한 후 다음 명령어 실행:
# rgthree 노드 설치 git clone https://github.com/rgthree/comfyui-utils.git custom_nodes/comfyui-utils # GGUF 로더 노드 설치 git clone https://github.com/BLaCKLo0p/comfyui_loadsave_nodes.git custom_nodes/comfyui_loadsave_nodes # UltimateSDUpscale 설치 git clone https://github.com/Coyyu/ComfyUI-UltimateSDUpscale.git custom_nodes/ComfyUI-UltimateSDUpscale # 파일 노드 설치 git clone https://github.com/fabiocaccamo/comfyui-file-nodes.git custom_nodes/comfyui-file-nodes
2. ComfyUI 재시작
모든 노드를 설치한 후 ComfyUI를 재시작하세요. 변경 사항이 반영됩니다.
3. 그래프 파일 확인
사용 중인 워크플로우(
.json파일)가 올바른 노드 이름을 참조하는지 확인하세요.
예:UnetLoaderGGUF가BLaCKLo0p/comfyui_loadsave_nodes에 있는지,Seed가rgthree/comfyui-utils에 있는지 등.
4. 추가 디버깅
- 노드 목록 확인: ComfyUI 웹 UI에서 왼쪽 패널의 "Nodes" 탭에서 해당 노드가 있는지 확인.
- 에러 로그 확인: 터미널의 에러 로그를 자세히 확인해 어떤 노드가 정확히 누락되었는지 파악.
- 커뮤니티 참조: ComfyUI Discord 또는 GitHub 이슈 페이지에서 유사한 문제 검색.
5. 대안: 워크플로우 수정
누락된 노드를 대체할 수 있는 다른 노드로 워크플로우를 수정하는 것도 방법입니다.
예:Seed대신 기본Seed노드 사용,UltimateSDUpscale대신Upscale노드 사용.
이 단계를 따라도 문제가 해결되지 않으면, 구체적인 에러 로그를 공유해 주세요! 추가 도움을 드리겠습니다. 😊
- rgthree/comfyui-utils:
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.