Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek-v3-0324· DeepSeekHugging Face LMArena Human Preference 140K

UnetLoaderGGUF Any Switch (rgthree) easy cleanGpuUsed GetImageSize+ FileNamePrefix…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Coherecommand-a-03-2025’s answer.
  1. User

    UnetLoaderGGUF Any Switch (rgthree) easy cleanGpuUsed GetImageSize+ FileNamePrefix DualCLIPLoaderGGUF Fast Groups Bypasser (rgthree) SDXLEmptyLatentSizePicker+ Seed (rgthree) Calculation [Dream] easy float UltimateSDUpscale

    When loading the graph, the following node types were not found

    이렇게 에러가 발생하고 있는데, compyui에서 뭘 해야함?

  2. DeepSeek Assistant

    이 오류는 ComfyUI에서 특정 노드(커스텀 노드)가 설치되지 않아 발생하는 문제입니다. 아래 단계대로 해결해 보세요.


    1. 누락된 노드 확인

    • 오류 메시지에서 "the following node types were not found" 아래에 구체적인 노드 이름이 나열되어 있을 겁니다.
      (예: rgthree.Comfy.SomeNode 형태로 표시됨)
      해당 노드 이름을 정확히 확인하세요.

    2. 필수 커스텀 노드 설치

    • 대부분 rgthree 관련 노드와 GGUF 로더 노드가 문제입니다.
      다음 커스텀 노드들을 ComfyUI Manager를 통해 설치하세요:

    📌 필수 설치 목록

    노드 이름GitHub 저장소 또는 설치 방법
    rgthree Nodesrgthree-comfy GitHub
    ComfyUI-GGUFComfyUI-GGUF GitHub
    UltimateSDUpscaleComfyUI-UltimateSDUpscale
    FileNamePrefix보통 ComfyUI-Custom-Scripts에 포함됨

    설치 방법

    1. ComfyUI Manager 열기
      • ComfyUI 웹 인터페이스에서 Manager 버튼 클릭.
    2. "Install Custom Nodes" 탭 선택.
    3. 검색창에 노드 이름(예: rgthree, GGUF) 입력 → 설치.

    3. ComfyUI 재시작

    • 노드 설치 후 반드시 ComfyUI 서버를 재시작해야 적용됩니다.
      (터미널에서 Ctrl+C로 종료 후 다시 실행)

    4. 추가 체크 사항

    • GGUF 모델 파일 확인:
      DualCLIPLoaderGGUF나 UnetLoaderGGUF는 .gguf 형식의 모델 파일이 필요합니다.

      • 해당 모델 파일이 ComfyUI/models/gguf/ 경로에 있는지 확인하세요.
      • 모델이 없다면 HuggingFace에서 다운로드.
    • 의존성 패키지 설치:
      일부 노드는 추가 Python 패키지가 필요할 수 있습니다.

      cd ComfyUI
      pip install -r requirements.txt
      

    5. 그래프 수정 (필요시)

    • 여전히 오류가 발생하면 누락된 노드를 유사한 노드로 대체하세요.
      예: UnetLoaderGGUF → 일반 UNetLoader 사용 (단, GGUF 모델은 호환되지 않음).

    6. 에러 메시지 공유 (해결 안 될 경우)

    • 정확한 오류 메시지를 캡처해 주시면 더 구체적인 도움을 드릴 수 있습니다.
      (예: "Node 'DualCLIPLoaderGGUF' is missing but required by...")

    이렇게 하면 대부분의 문제가 해결됩니다! 😊
    설치 중 어려움이 있으면 알려주세요.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.