Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-sonnet-4-20250514-thinking-32k· AnthropicHugging Face LMArena Human Preference 140K

now make it so it only floats zand stays if its touching another object liek its…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Metallama-4-maverick-03-26-experimental’s answer.
  1. User

    now make it so it only floats zand stays if its touching another object liek its clipping with anohter object it will be weleded tyo that obnject but if its just touching air it will fall to the ground

  2. Claude Assistant

    Here's the updated script that will weld parts when they're clipping/intersecting with other objects, but let them fall when they're just in air:

    -- Building System Script
    -- Place this LocalScript in StarterGui or StarterPlayerScripts
    
    local Players = game:GetService("Players")
    local UserInputService = game:GetService("UserInputService")
    local RunService = game:GetService("RunService")
    local Camera = workspace.CurrentCamera
    local player = Players.LocalPlayer
    local mouse = player:GetMouse()
    
    -- Define the folder name
    local DRAGABLE_FOLDER_NAME = "Dragable"
    -- Find the Dragable folder in the workspace
    local dragableFolder = workspace:FindFirstChild(DRAGABLE_FOLDER_NAME)
    
    -- Variables
    local heldPart = nil
    local holding = false
    local connection = nil
    local originalCFrame = nil
    local rotationX, rotationY, rotationZ = 0, 0, 0
    
    -- Settings
    local PICKUP_DISTANCE = 50 -- Maximum distance to pick up parts
    local ROTATION_INCREMENT = 15 -- Degrees to rotate per key press
    local INTERSECTION_THRESHOLD = 0.1 -- Minimum overlap to consider as intersection
    
    -- Check if the Dragable folder exists
    if not dragableFolder or not dragableFolder:IsA("Folder") then
        warn("Building System: Could not find a Folder named '" .. DRAGABLE_FOLDER_NAME .. "' in Workspace. Pickup will not work.")
        script.Enabled = false
        return
    end
    
    -- Function to check if a part can be picked up
    local function canPickUp(part)
        if not part:IsA("BasePart") then return false end
        if part.Parent ~= dragableFolder then return false end
        return true
    end
    
    -- Function to get the bounding box of a part
    local function getPartBounds(part)
        local cf, size = part:GetBoundingBox()
        return cf, size
    end
    
    -- Function to check if two bounding boxes intersect significantly
    local function doBoxesIntersect(cf1, size1, cf2, size2)
        -- Convert to world space positions
        local pos1 = cf1.Position
        local pos2 = cf2.Position
        
        -- Calculate half sizes
        local half1 = size1 / 2
        local half2 = size2 / 2
        
        -- Check for intersection on each axis
        local xOverlap = math.abs(pos1.X - pos2.X) < (half1.X + half2.X - INTERSECTION_THRESHOLD)
        local yOverlap = math.abs(pos1.Y - pos2.Y) < (half1.Y + half2.Y - INTERSECTION_THRESHOLD)
        local zOverlap = math.abs(pos1.Z - pos2.Z) < (half1.Z + half2.Z - INTERSECTION_THRESHOLD)
        
        return xOverlap and yOverlap and zOverlap
    end
    
    -- Function to find intersecting parts
    local function findIntersectingPart(part)
        local partCF, partSize = getPartBounds(part)
        local touchingParts = part:GetTouchingParts()
        
        for _, touchingPart in ipairs(touchingParts) do
            -- Ignore parts in the dragable folder, player character, and the part itself
            if touchingPart ~= part 
               and touchingPart.Parent ~= dragableFolder 
               and not touchingPart:IsDescendantOf(player.Character or workspace) then
                
                local touchingCF, touchingSize = getPartBounds(touchingPart)
                
                -- Check if they're actually intersecting (not just touching)
                if doBoxesIntersect(partCF, partSize, touchingCF, touchingSize) then
                    return touchingPart
                end
            end
        end
        
        return nil
    end
    
    -- Function to weld two parts together
    local function weldParts(part1, part2)
        -- Remove any existing welds on part1
        for _, child in ipairs(part1:GetChildren()) do
            if child:IsA("WeldConstraint") and child.Name == "BuildingWeld" then
                child:Destroy()
            end
        end
        
        -- Create new weld
        local weld = Instance.new("WeldConstraint")
        weld.Name = "BuildingWeld"
        weld.Part0 = part1
        weld.Part1 = part2
        weld.Parent = part1
        
        -- Make sure the part is anchored
        part1.Anchored = true
        
        return weld
    end
    
    -- Function to remove all building welds from a part
    local function removeWelds(part)
        for _, child in ipairs(part:GetChildren()) do
            if child:IsA("WeldConstraint") and child.Name == "BuildingWeld" then
                child:Destroy()
            end
        end
    end
    
    -- Function to pick up a part
    local function pickUpPart(part)
        if not canPickUp(part) then return end
        
        -- Remove any existing welds before picking up
        removeWelds(part)
        
        heldPart = part
        holding = true
        originalCFrame = part.CFrame
        rotationX, rotationY, rotationZ = 0, 0, 0
        
        -- Make part non-collidable and anchored while holding
        part.CanCollide = false
        part.Anchored = true
        
        -- Start the hold loop
        connection = RunService.Heartbeat:Connect(function()
            if heldPart and holding then
                updateHeldPart()
            end
        end)
    end
    
    -- Function to update held part position
    function updateHeldPart()
        if not heldPart then return end
        
        local camera = workspace.CurrentCamera
        local unitRay = camera:ScreenPointToRay(mouse.X, mouse.Y)
        
        local distance = 10
        local targetPosition = unitRay.Origin + unitRay.Direction * distance
        
        local rotation = CFrame.Angles(
            math.rad(rotationX),
            math.rad(rotationY),
            math.rad(rotationZ)
        )
        
        heldPart.CFrame = CFrame.new(targetPosition) * rotation
    end
    
    -- Function to place the part
    local function placePart()
        if not heldPart or not holding then return end
        
        holding = false
        
        -- Restore collision detection
        heldPart.CanCollide = true
        
        -- Wait a couple frames for physics to update
        wait(0.1)
        
        -- Check if the part is intersecting with another object
        local intersectingPart = findIntersectingPart(heldPart)
        
        if intersectingPart then
            -- Part is intersecting with another object - weld it
            weldParts(heldPart, intersectingPart)
            print("Part welded to: " .. intersectingPart.Name)
        else
            -- Part is in open air - let it fall
            heldPart.Anchored = false
            print("Part released to fall")
        end
        
        -- Clean up
        if connection then
            connection:Disconnect()
            connection = nil
        end
        
        heldPart = nil
        rotationX, rotationY, rotationZ = 0, 0, 0
    end
    
    -- Mouse click to pick up parts
    mouse.Button1Down:Connect(function()
        if holding then
            placePart()
        else
            local target = mouse.Target
            if target and target.Parent then
                local distance = (target.Position - Camera.CFrame.Position).Magnitude
                if distance <= PICKUP_DISTANCE then
                    if canPickUp(target) then
                        pickUpPart(target)
                    end
                end
            end
        end
    end)
    
    -- Keyboard input for rotation and cancel
    UserInputService.InputBegan:Connect(function(input, gameProcessed)
        if gameProcessed or not holding or not heldPart then return end
        
        if input.KeyCode == Enum.KeyCode.R then
            rotationX = rotationX + ROTATION_INCREMENT
        elseif input.KeyCode == Enum.KeyCode.T then
            rotationY = rotationY + ROTATION_INCREMENT
        elseif input.KeyCode == Enum.KeyCode.Y then
            rotationZ = rotationZ + ROTATION_INCREMENT
        elseif input.KeyCode == Enum.KeyCode.Escape then
            -- Cancel pickup
            if heldPart then
                heldPart.CFrame = originalCFrame
                heldPart.CanCollide = true
                heldPart.Anchored = false
            end
            holding = false
            if connection then
                connection:Disconnect()
                connection = nil
            end
            heldPart = nil
            rotationX, rotationY, rotationZ = 0, 0, 0
        end
    end)
    
    -- Handle player leaving (cleanup)
    Players.PlayerRemoving:Connect(function(leavingPlayer)
        if leavingPlayer == player and holding then
            placePart()
        end
    end)
    
    print("Building system loaded! Parts will weld when intersecting with objects, fall when in open air.")
    

    Key Changes:

    1. Improved Intersection Detection:

      • getPartBounds(): Gets the bounding box of a part
      • doBoxesIntersect(): Checks if two bounding boxes actually overlap significantly (not just touching)
      • findIntersectingPart(): Finds the first part that the held part is actually intersecting with
    2. Welding System:

      • weldParts(): Creates a WeldConstraint between two parts
      • removeWelds(): Removes existing building welds when picking up a part
      • Parts that intersect get welded and stay anchored
    3. Smart Placement Logic:

      • If intersecting with another object → Weld and stay floating
      • If in open air → Unanchor and let fall
      • Uses INTERSECTION_THRESHOLD to determine significant overlap vs just touching
    4. Better Physics Handling:

      • Added a small wait after enabling collision to let physics update
      • Removes old welds when picking up previously welded parts

    How it works:

    • Intersecting/Clipping: When you place a part and it's overlapping with another object by more than the threshold, it gets welded to that object and stays floating
    • Open Air: When you place a part in empty space, it becomes unanchored and falls due to gravity
    • Visual Feedback: Console messages tell you whether a part was welded or released to fall

    The INTERSECTION_THRESHOLD variable controls how much overlap is needed to consider it an intersection rather than just touching. You can adjust this value to make the system more or less sensitive.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.