now make it so it only floats zand stays if its touching another object liek its…
- User
now make it so it only floats zand stays if its touching another object liek its clipping with anohter object it will be weleded tyo that obnject but if its just touching air it will fall to the ground
Assistant
Let's modify the script to implement the following behavior:
- Float-and-Stick Logic:
- When placing a part, it will temporarily float just above the point where you released the mouse.
- The part will check for collisions (touching other parts).
- If it's touching another solid object (not just air), it will weld itself to that object (or at least anchor itself in place).
- If it's not touching anything solid (just floating in air), it will start falling due to gravity until it hits the ground or another object.
Here's the updated LocalScript:
-- Building System Script -- Place this LocalScript in StarterGui or StarterPlayerScripts local Players = game:GetService("Players") local UserInputService = game:GetService("UserInputService") local RunService = game:GetService("RunService") local PhysicsService = game:GetService("PhysicsService") local Camera = workspace.CurrentCamera local player = Players.LocalPlayer local mouse = player:GetMouse() -- Define the folder name local DRAGABLE_FOLDER_NAME = "Dragable" -- Find the Dragable folder in the workspace local dragableFolder = workspace:FindFirstChild(DRAGABLE_FOLDER_NAME) -- Variables local heldPart = nil local holding = false local connection = nil local originalCFrame = nil local rotationX, rotationY, rotationZ = 0, 0, 0 -- Settings local PICKUP_DISTANCE = 50 -- Maximum distance to pick up parts local ROTATION_INCREMENT = 15 -- Degrees to rotate per key press local FLOAT_CHECK_DELAY = 0.2 -- Seconds to wait before checking if part should fall or stick -- Check if the Dragable folder exists if not dragableFolder or not dragableFolder:IsA("Folder") then warn("Building System: Could not find a Folder named '" .. DRAGABLE_FOLDER_NAME .. "' in Workspace. Pickup will not work.") script.Enabled = false return end -- Function to check if a part can be picked up local function canPickUp(part) if not part:IsA("BasePart") then return false end if part.Parent ~= dragableFolder then return false end return true end -- Function to check if part is touching solid objects (not just air) local function isPartTouchingSolid(part) -- Get all parts touching this part local touchingParts = part:GetTouchingParts() -- Filter out parts that are: -- 1. The part itself -- 2. Inside the Dragable folder (we don't want self-collisions or sibling collisions to count) -- 3. Non-solid (e.g., transparent or CanCollide=false parts) for _, touchingPart in ipairs(touchingParts) do if touchingPart ~= part and touchingPart.Parent ~= dragableFolder and touchingPart.CanCollide and (not PhysicsService:IsPartCollisionGroupEnabled("NoBuildCollision") or not PhysicsService:IsPartInCollisionGroup(touchingPart, "NoBuildCollision")) then return true -- Found a solid touch end end return false -- Only touching air or irrelevant parts end -- Function to pick up a part local function pickUpPart(part) if not canPickUp(part) then return end heldPart = part holding = true originalCFrame = part.CFrame rotationX, rotationY, rotationZ = 0, 0, 0 part.CanCollide = false part.Anchored = true connection = RunService.Heartbeat:Connect(function() if heldPart and holding then updateHeldPart() end end) end -- Function to update held part position function updateHeldPart() if not heldPart then return end local camera = workspace.CurrentCamera local unitRay = camera:ScreenPointToRay(mouse.X, mouse.Y) local distance = 10 local targetPosition = unitRay.Origin + unitRay.Direction * distance + Vector3.new(0, 0.5, 0) local rotation = CFrame.Angles( math.rad(rotationX), math.rad(rotationY), math.rad(rotationZ) ) heldPart.CFrame = CFrame.new(targetPosition) * rotation end -- Function to place the part (new float-and-stick logic) local function placePart() if not heldPart or not holding then return end holding = false -- Step 1: Release the part at the current position (but keep it non-colliding for now) heldPart.CanCollide = false heldPart.Anchored = true -- Keep it suspended -- Step 2: Wait a short duration (FLOAT_CHECK_DELAY) to let physics settle wait(FLOAT_CHECK_DELAY) -- Step 3: Re-enable collision *just* for the touch check heldPart.CanCollide = true -- Step 4: Check if it's touching anything solid if isPartTouchingSolid(heldPart) then -- It's clipping or resting on something solid. WELD IT. heldPart.Anchored = true -- Keep it locked in place -- Optional: Create a weld or constraint for stronger attachment -- We'll use a simple WeldConstraint for demonstration local weld = Instance.new("WeldConstraint") weld.Parent = heldPart local touchingParts = heldPart:GetTouchingParts() for _, otherPart in ipairs(touchingParts) do if otherPart ~= heldPart and otherPart.CanCollide and otherPart.Parent ~= dragableFolder then weld.Part0 = heldPart weld.Part1 = otherPart break -- Weld to the first valid solid part end end else -- It's floating in air. LET IT FALL. heldPart.Anchored = false -- Gravity will take over end -- Cleanup if connection then connection:Disconnect() connection = nil end heldPart = nil rotationX, rotationY, rotationZ = 0, 0, 0 end -- Mouse click to pick up/place parts mouse.Button1Down:Connect(function() if holding then placePart() else local target = mouse.Target if target and target.Parent then local distance = (target.Position - Camera.CFrame.Position).Magnitude if distance <= PICKUP_DISTANCE and canPickUp(target) then pickUpPart(target) end end end end) -- Keyboard input for rotation and cancel UserInputService.InputBegan:Connect(function(input, gameProcessed) if gameProcessed or not holding or not heldPart then return end if input.KeyCode == Enum.KeyCode.R then rotationX = rotationX + ROTATION_INCREMENT elseif input.KeyCode == Enum.KeyCode.T then rotationY = rotationY + ROTATION_INCREMENT elseif input.KeyCode == Enum.KeyCode.Y then rotationZ = rotationZ + ROTATION_INCREMENT elseif input.KeyCode == Enum.KeyCode.Escape then if heldPart then heldPart.CFrame = originalCFrame heldPart.CanCollide = true heldPart.Anchored = false end heldPart = nil holding = false rotationX, rotationY, rotationZ = 0, 0, 0 if connection then connection:Disconnect() connection = nil end end end) -- Handle player leaving (cleanup) Players.PlayerRemoving:Connect(function(leavingPlayer) if leavingPlayer == player and holding then placePart() end end) print("Building system loaded! Dragable parts float then stick if touching solids, otherwise fall.")Key Changes:
placePart()Logic Overhaul:- After releasing the mouse, the part is kept anchored and non-colliding for a brief moment (
FLOAT_CHECK_DELAY, 0.2 seconds). - Then, collision is re-enabled (
CanCollide = true) just for the physics engine to register any touching parts. isPartTouchingSolid(heldPart)checks if the part is touching any solid, collidable object outside the Dragable folder.- If touching solid: The part stays anchored (
Anchored = true). Optionally, a WeldConstraint is created between the held part and the first solid part it touches. This "welds" them together. - If not touching solid (floating): The part becomes unanchored (
Anchored = false), and gravity takes over. It will fall until it hits something.
- After releasing the mouse, the part is kept anchored and non-colliding for a brief moment (
isPartTouchingSolid(part)Function:- Uses
part:GetTouchingParts()to get all parts in contact. - Filters the list:
- Ignores the part itself.
- Ignores parts inside the
Dragablefolder (siblings or self). - Only counts parts where
CanCollide == true(solid objects).
- Returns
trueif any valid solid touch is found; otherwise,false(it's in mid-air).
- Uses
- Welding (Optional but Recommended):
- If you want parts to truly "stick" together, a
WeldConstraintis created between the placed part and the first valid solid part it touches. - This prevents them from sliding apart later.
- If you want parts to truly "stick" together, a
Behavior Summary:
- Pick up a part from the
Dragablefolder by clicking on it. - Move it around with the camera.
- Rotate using R (X-axis), T (Y-axis), Y (Z-axis).
- Place by clicking again.
- Immediately after placement:
- If the part is overlapping or resting on another solid object, it will anchor itself (and optionally weld).
- If the part is floating in air, it will start falling due to gravity.
- Press ESC to cancel placement and return the part to its original spot.
Notes:
- Make sure other objects in the workspace (e.g., terrain, buildings) have
CanCollide = truefor the touch detection to work. - If you want even stronger attachment, explore using
Motor6Dor other constraints instead ofWeldConstraint. - Adjust
FLOAT_CHECK_DELAYif parts aren't sticking as expected (increase if physics is slow, decrease if you want snappier placement).
Now, your building system has a more realistic "float then stick" behavior!
- Float-and-Stick Logic:
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.