Write me a script for the Arduino that blinks the led on the board
- User
Write me a script for the Arduino that blinks the led on the board
- Assistant
Here's a simple script for the Arduino that blinks the built-in LED on the board:
// Define the LED pin const int LED_PIN = LED_BUILTIN; // The setup function runs once when the board is powered or reset void setup() { // Initialize the LED pin as an output pinMode(LED_PIN, OUTPUT); } // The loop function runs continuously after the setup function void loop() { digitalWrite(LED_PIN, HIGH); // Turn the LED on (HIGH is the voltage level) delay(1000); // Wait for a second digitalWrite(LED_PIN, LOW); // Turn the LED off by making the voltage LOW delay(1000); // Wait for a second }This script defines the built-in LED pin (usually pin 13) and sets it as an output. In the loop function, it turns the LED on and off with a delay of 1000 milliseconds (1 second) between each state. The LED will blink continuously with a 1-second interval between on and off states.
- User
nice
- Assistant
I'm glad you like it! The Arduino is a great platform for learning about programming and electronics, and I encourage you to experiment with it
- User
cool
- Assistant
So then, do you have any questions? Or do you want to talk about anything?
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
- Human-written demonstration (OpenAssistant volunteers)Compare side by side →
- Human-written demonstration (OpenAssistant volunteers)Compare side by side →
- Human-written demonstration (OpenAssistant volunteers)Compare side by side →
- Human-written demonstration (OpenAssistant volunteers)Compare side by side →
- Human-written demonstration (OpenAssistant volunteers)Compare side by side →
- Human-written demonstration (OpenAssistant volunteers)Compare side by side →
- Human-written demonstration (OpenAssistant volunteers)Compare side by side →