Skip to content
TheChatArchiveThe Chat Archive
Mistralmixtral-8x7b-instruct-v0.1· Mistral AIHugging Face Arena Human Preference 55K

Build a bash script that I can run from my lte router running openwrt that will read…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Metallama-2-70b-chat’s answer.
  1. User

    Build a bash script that I can run from my lte router running openwrt that will read incoming sms and when they contain !status it replies by sms with the lte connection status

  2. Mistral Assistant

    Here is an example of a bash script that you can use as a starting point for your project. This script uses the mmcli command to interact with the ModemManager service, which should be available on most Linux-based systems, including OpenWRT.

    Please note that this script is just a starting point and you may need to modify it to fit your specific needs and environment.

    #!/bin/bash
    
    # Check if ModemManager is running
    if ! pgrep -x modemmanager > /dev/null
    then
        echo "ModemManager is not running"
        exit 1
    fi
    
    while true
    do
        # Read incoming SMS
        sms=$(mmcli -m any --messaging-create-sms="text='!status'" --messaging-sms-folder=inbox | grep "Text" | awk '{print $2}')
    
        # Check if any SMS was received
        if [ -n "$sms" ]
        then
            # Get LTE connection status
            status=$(mmcli -m any --modem-get-signal-strength | grep "gsm signal quality" | awk '{print $3, $4}')
    
            # Send SMS with LTE connection status
            echo "Sending SMS with LTE connection status: $status"
            mmcli -m any --messaging-send-sms="destination=$1&text=$status"
        fi
    
        # Sleep for 5 seconds
        sleep 5
    done
    

    This script uses the mmcli command to create a new SMS message with the text "!status", and then reads the incoming SMS messages from the inbox. If an SMS message is received containing the text "!status", the script will retrieve the LTE connection status using the mmcli command and then sends it back in an SMS message to the sender.

    You can run this script in the background on your OpenWRT router and it will continuously monitor for incoming SMS messages.

    Please note that this script is just a starting point and should be tested and modified as necessary to work with your specific setup and requirements. Also, the script does not handle errors and edge cases, you may want to add error handling, logging and

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.