Skip to content
The Chat Archive

Side-by-side comparison

Both conversations start with the same prompt. Responses were generated in different, uncontrolled contexts. This is not a benchmark.
First prompt

what is the absolute cheapest way to build a eurorack case

gpt-3.5-turbo-0301· OpenAI WildChat-4.8M (AI2)

As an AI language model, I do not have access to current prices and availability of materials. However, here is a general outline for building a low-cost Eurorack case:

  1. Use a cardboard or wooden box as a base. You can find boxes at your local store or recycling center.

  2. Purchase rails online or at a local hardware store. They should cost around 20−20-30.

  3. Measure and drill holes for the rails in the box.

  4. Attach the rails to the box using screws.

  5. Purchase a power supply module, which should cost between 60−60-100.

  6. Install the power supply module inside the box.

  7. Connect the power supply to the rails.

  8. Add a panel for the front of the case. You can make one from wood, acrylic or metal.

  9. Connect your modules to the rails and start patching.

Keep in mind that this is a budget-friendly option and may not be as durable or aesthetically pleasing as a professionally-made case. Also, be cautious of the materials you use as they may not shield the modules from electrical interference.

gpt-4-0314· OpenAI WildChat-4.8M (AI2)

The absolute cheapest way to build a Eurorack case is by using repurposed or low-cost materials to construct a basic open-frame case. Here's a simple and cheap process:

  1. Measure: Determine the desired size of your case – consider the number of rows and units (HP) for your modules.

  2. Get Materials: To save cost, try to find repurposed materials. Look for a second-hand wooden box, an old toolbox, an IKEA shelf, or even cardboard as the main enclosure. For the rails, use aluminum U-channels or L-brackets from a hardware store.

  3. Cut and Assemble: Measure and cut the materials to size. Don't forget to include the necessary gaps and clearances for the rails and modules. Use screws or nails to secure the pieces together.

  4. Attach Rails: You can either screw the rails directly to the case frame or use sliding nuts and screws to make the rails adjustable. Make sure the distance between rail pairs is compatible with Eurorack modules (typically 128.5mm from center to center).

  5. Power Solution: For a very cheap setup, you may consider a DIY power solution like the "Frequency Central DIY Power" or the "Befaco DIY Lunchbus." Just remember that a reliable power supply is essential to the performance of your system, so don't skimp too much on this part.

  6. Install Modules: Once your case and power solution are ready, start installing your modules according to the manufacturer's instructions.

Remember, this is the cheapest suggestion, and there might be some compromises in terms of durability and aesthetics. It is always recommended to invest in a quality case to ensure the longevity and performance of your Eurorack system.

Sign in to record which response you prefer.