Skip to content
TheChatArchiveThe Chat Archive
DeepSeekDeepseek v3.2· deepseekHugging Face Frontier Reasoning Traces

Young Timofey has a birthday today! He got kit of n cubes as a birthday present from his…

  1. User

    Young Timofey has a birthday today! He got kit of n cubes as a birthday present from his parents. Every cube has a number ai, which is written on it. Timofey put all the cubes in a row and went to unpack other presents.

    In this time, Timofey's elder brother, Dima reordered the cubes using the following rule. Suppose the cubes are numbered from 1 to n in their order. Dima performs several steps, on step i he reverses the segment of cubes from i-th to (n - i + 1)-th. He does this while i ≤ n - i + 1.

    After performing the operations Dima went away, being very proud of himself. When Timofey returned to his cubes, he understood that their order was changed. Help Timofey as fast as you can and save the holiday — restore the initial order of the cubes using information of their current location. Input

    The first line contains single integer n (1 ≤ n ≤ 2·105) — the number of cubes.

    The second line contains n integers a1, a2, ..., an ( - 109 ≤ ai ≤ 109), where ai is the number written on the i-th cube after Dima has changed their order.

    Output

    Print n integers, separated by spaces — the numbers written on the cubes in their initial order.

    It can be shown that the answer is unique.

    Examples

    Input

    7 4 3 7 6 9 1 2

    Output

    2 3 9 6 7 1 4

    Input

    8 6 1 4 2 5 6 9 2

    Output

    2 1 6 2 5 4 9 6

    Note

    Consider the first sample.

    1. At the begining row was [2, 3, 9, 6, 7, 1, 4].
    2. After first operation row was [4, 1, 7, 6, 9, 3, 2].
    3. After second operation row was [4, 3, 9, 6, 7, 1, 2].
    4. After third operation row was [4, 3, 7, 6, 9, 1, 2].
    5. At fourth operation we reverse just middle element, so nothing has changed. The final row is [4, 3, 7, 6, 9, 1, 2]. So the answer for this case is row [2, 3, 9, 6, 7, 1, 4].
  2. DeepSeek Assistant

    We need to understand the transformation: Given initial array A of length n. Then Dima performs steps: for i from 1 upwards while i ≤ n - i + 1, he reverses the segment from i to n-i+1 (inclusive). So for each i, we take subarray from position i to position n-i+1 and reverse it.

    After performing all these steps (in order i=1,2,... until the condition fails), we get final array B. We are given B, we need to recover A.

    We can think of this as applying a sequence of operations: each operation is reversing a prefix-suffix interval. This is similar to a permutation on positions. Let's denote positions 1..n. For each step i, we apply reversal of positions [i, n-i+1]. Let's denote total operation as composition of these reversals in order (first i=1, then i=2, etc). Since reversals are permutations, the overall transformation is a permutation P such that B = A permuted? Actually reversal reorders the elements. But careful: When we reverse a segment, we swap positions within that segment. So after sequence, the element that originally was at position j ends up at some position k. We can compute the final permutation for positions.

    We need to invert the process: Given B, we want A. That is, we want to apply the inverse of the sequence of operations. So if we can simulate the inverse process: start from B and apply reversed operations in reverse order. Since each operation is its own inverse (reversal of same segment is involution). Indeed reversing a segment twice yields original order. So the inverse of operation i is the same operation i (reverse the segment again). So to recover A from B, we can apply the same operations but in reverse order? Actually forward process: Apply op1, then op2, ... op_m (where m = floor((n+1)/2)?). Let's compute number of steps: For i=1,2,... while i ≤ n-i+1. That means i ≤ (n+1)/2. So number of steps is floor((n+1)/2). For n=7, (n+1)/2=4, steps i=1..4. For n=8, (n+1)/2=4.5, steps i=1..4 (since i=5 fails). So m = floor((n+1)/2).

    Thus forward transformation F = op_m ∘ ... ∘ op_2 ∘ op_1? Actually careful: He performs steps in order: step i reverses segment [i, n-i+1]. So after step1, we have array1 = reverse(1..n) applied to initial A. Then step2: reverse segment [2, n-1] on array1. And so on. So final B = op_m ( ... (op2 (op1 (A))) ... ). So transformation T = op_m ∘ op_{m-1} ∘ ... ∘ op_1? Wait, composition order: applying op1 then op2 means: after op1, we have A' = op1(A). Then op2(A') = op2(op1(A)) = (op2 ∘ op1)(A). So final B = op_m ∘ op_{m-1} ∘ ... ∘ op_1 (A). Indeed last operation applied is op_m, which is composed on left. So T = op_m ∘ op_{m-1} ∘ ... ∘ op_1.

    Now each op_i is its own inverse: op_i ∘ op_i = identity. So the inverse transformation T^{-1} = op_1 ∘ op_2 ∘ ... ∘ op_m. Because (op_m ∘ ... ∘ op_1)^{-1} = op_1^{-1} ∘ ... ∘ op_m^{-1} = op_1 ∘ ... ∘ op_m.

    Thus to recover A from B, we need to apply operations op1, op2, ..., op_m (in that order) to B. That is, starting from B, we reverse segment [1, n] (i=1), then reverse segment [2, n-1], ..., up to i=m. That should give A.

    Check with sample: n=7, B = [4,3,7,6,9,1,2]. Apply op1: reverse [1,7] -> [2,1,9,6,7,3,4]? Actually reverse whole array: becomes [2,1,9,6,7,3,4]? Wait B: index1=4,2=3,3=7,4=6,5=9,6=1,7=2. Reverse => [2,1,9,6,7,3,4]. That's after op1. Then op2: reverse segment [2,6] (since n-i+1=7-2+1=6). So positions 2 to 6: current array: [2,1,9,6,7,3,4]. Segment 2..6 = [1,9,6,7,3]; reversed => [3,7,6,9,1]. So new array: [2,3,7,6,9,1,4]. Then op3: reverse segment [3,5] (i=3, n-i+1=5). Current: [2,3,7,6,9,1,4]. Segment 3..5 = [7,6,9]; reversed => [9,6,7]. So array becomes [2,3,9,6,7,1,4]. That's the answer given? Actually sample output is [2,3,9,6,7,1,4]. Yes, matches. So indeed we invert by applying ops from i=1 to m.

    Thus solution: given final array B, we need to apply reversals on segments [i, n-i+1] for i=1..m. However n up to 2e5, m ~ 1e5, naive reversal each time would be O(n^2) if we reverse each segment explicitly. But we can simulate these operations efficiently.

    Observation: The operations are consecutive reversals on nested segments (they are centered around the middle). For i=1, segment is whole array; for i=2, segment is from 2 to n-1; etc. So it's like we gradually "un-reverse" the array from the outside in. We need to compute the net effect of applying these reversals to B.

    Alternate perspective: The process of applying op1..op_m to B is equivalent to: for each position j, we can compute where its element comes from in B after these operations. Perhaps there is a pattern. We can try to simulate with a data structure that supports range reversal efficiently (like a treap). But constraints 2e5, m up to 1e5, we can possibly use a balanced binary tree with lazy reversal marks. Or we can directly compute the final order without heavy DS by noticing the pattern.

    Let's try to analyze the effect of these reversals on positions.

    We have operations: reverse(1, n), reverse(2, n-1), reverse(3, n-2), ..., reverse(m, n-m+1) where m = floor((n+1)/2). These are symmetric.

    Consider applying them in sequence to B. Let's denote current array after k-1 operations = C_{k-1}. Then we apply reverse(k, n-k+1) to get C_k.

    Goal: A = C_m.

    Alternatively, we might derive A directly from B by a simple mapping. Let's test small n.

    First, note that the forward process (from A to B) is as described in the note. Maybe we can find that the resulting B is just A with some pattern of swapped pairs? Let's try to deduce the permutation mapping from initial index to final index after all ops. Let’s define indices 1-indexed.

    Let initial array A at positions 1..n. After forward ops (op1 then op2 ... up to op_m?), Actually forward is op1, op2, ..., op_m applied in that order. So forward transformation T_f = op_m ∘ ... ∘ op_1. Inverse we computed as op_1 ∘ ... ∘ op_m. But we need the mapping from A to B? Not directly needed; we want to recover A from B, i.e., apply inverse: A = op_1 ∘ ... ∘ op_m (B). So the mapping from B to A is op_1 ∘ ... ∘ op_m. That's the same as the forward mapping but with order of i reversed? Actually forward mapping is op_m ∘ ... ∘ op_1. So they are different. But maybe due to symmetry they are the same? Let's test with n=7: forward mapping sends A to B as in note: A = [2,3,9,6,7,1,4] -> B = [4,3,7,6,9,1,2]. Apply op1..op_m to B yields A. So the mapping from B to A is op_1..op_m. So we want to compute that efficiently.

    Now consider the combined effect of op_1..op_m on an array. Is there a simpler pattern? Let's simulate mentally for different positions.

    Define indices i from 1 to n. The operations are nested reversals. The effect on a given element can be seen as it moves between positions. Could treat it as we have two pointers left = 1, right = n, and we process? Actually, if we perform the sequence op_1..op_m, we are reversing larger segments first, then smaller. Might result in a simple final arrangement: perhaps the original array A can be obtained by taking B and doing something like: take elements from B in order: last, first, second last, second, third last, third, ...? Let's test with sample n=7 B: [4,3,7,6,9,1,2]. If we take pattern: last (2), first (4), second last (1), second (3), third last (9), third (7), fourth last? But we have 7 elements, maybe pattern is: output: 2,3,9,6,7,1,4. That doesn't match simple alternating.

    Alternatively, maybe applying op_1..op_m is equivalent to: for i from 1 to m, swap the element at position i with position n-i+1? Not exactly.

    Let's simulate the process step by step but think about the net effect on order. This resembles the process of "reversing the array by gradually shrinking the reversal interval", similar to a "folding" operation. Might be able to model it as a deque.

    Consider we have array B. Operation 1: reverse whole array -> we get B reversed. Operation 2: reverse segment [2, n-1] on that reversed array. Operation 3: reverse segment [3, n-2] on result. And so on.

    Idea: we could simulate the process in O(n) by using two pointers and toggling direction. Because each reversal flips the order of a subarray, but since they are nested, we can think of building the final array by picking elements from ends in some alternating pattern based on parity of steps.

    Let me denote after performing op_1..op_k, what is the state? Maybe we can treat the process as: maintain a deque representing the current array. But we need to apply many reversals on subarrays. Since reversals are on prefixes-suffixes symmetric, we could perhaps treat it as: The array is being transformed by repeatedly reversing the whole current segment, then inner, etc. But we can think of the process in terms of a stack of directions.

    Alternate approach: compute the final index of each element after applying op_1..op_m. Since each operation is a reversal, we can compute the composition of permutations. Let’s define permutation P such that A[i] = B[ P(i) ]? Actually A = op_1..op_m(B). So element that ends up at position i in A comes from position j in B where j = ?. So we want mapping from B index to A index. Let's compute for a given position j in B, where does it go after applying all operations? Alternatively, we can compute for each index i in A, from which index in B it originates. That is, define Q(i) = original index in B such that A[i] = B[Q(i)]. Then A = B reordered according to Q^{-1}? Actually if we treat arrays as lists, then A[i] = B[ Q(i) ] means we take element from B at position Q(i) and put at i. So we need to find Q.

    Given we have operations that are reversals, we can compute the trajectory of a position through each op. Since reversals are involutions, the mapping from initial position (in B) to final position (in A) is composition of these reversals in order.

    Let’s define after applying first k operations (op_1..op_k) we have an intermediate array C_k. Let f_k(p) denote the index in original B that is currently at position p after k operations. Then initially (k=0) f_0(p)=p (since C_0 = B). Operation op_k: reverse segment [k, n-k+1]. So how does f_{k-1} update to f_k? When we reverse segment [L,R] where L=k, R=n-k+1, positions within the segment get flipped: a position p in [L,R] will map to new position p' = L+R - p. Also positions outside remain same. So the element that was at position p before op_k moves to position p' after reversal. But we care about the origin mapping: after reversal, the element at position q came from position p = L+R - q (if q in segment) else p = q. So if we have f_{k-1}(p) tells which original B index is at position p before op_k. After reversal, at position q we will have element that was at p = (if q in segment then L+R-q else q) before op_k. Therefore f_k(q) = f_{k-1}( if q in [L,R] then L+R-q else q ). So we can compute f_m(p) recursively.

    We want A[i] = B[ f_m(i) ]? Actually A = C_m, so at position i in A, the original B index is f_m(i). So we need to compute f_m(i) for all i. Then we can construct A by A[i] = B[ f_m(i) ].

    Thus problem reduces to: compute permutation f = composition of these nested reversals applied in order (from op_1 to op_m). Since m ~ n/2, and each op is a reversal on a segment, we can compute f for all positions in O(n) by simulating the effect of operations on positions? But naive simulation per position per operation would be O(n*m) = O(n^2). However we can exploit structure: the reversals are nested and the mapping might be expressed as some function of i.

    We can attempt to compute f(i) directly. Since operations are reversals on intervals that are symmetric around center, we might derive that f(i) depends on parity of i and n.

    Let's analyze step by step with index i. Initially position = i. Then we apply reversals for k from 1 to m. For each k, if current position lies in the interval [k, n-k+1], then it gets mapped to L+R - current position = k + (n-k+1) - current = n+1 - current. Actually L+R = k + (n - k + 1) = n+1. So interesting: the reversal segment's endpoints sum to n+1 always. So reversing [L,R] where L+R = n+1 maps position p to p' = n+1 - p, provided p is in [L,R]. So each operation, if the current position is between k and n-k+1 inclusive, we reflect it about the center (n+1)/2. Otherwise it stays.

    Now note that as k increases, the interval shrinks. So for a given starting index i (position in final A? Actually we want to compute original index in B: we start from p0 = i, then apply operations in forward order? Wait careful: f_k(q) = origin index after k ops. To compute f_m(i), we start from final position i and go backwards through operations? Actually we defined f_k such that after k ops, the element at position p came from B index f_k(p). So f_0(p)=p. Then for each op_k, we update mapping via f_k(p) = f_{k-1}( reflect_if_in(p, k, n-k+1) ). So to compute f_m(i), we can start with p = i, then for k=m down to 1? Let's derive recurrence correctly.

    We have transformation on positions: when we apply reversal on interval [L,R], positions inside get mapped to new positions. The mapping from old position to new position is: new_pos = reflect(p) if p in [L,R] else p. But our f_k tracks origin: after reversal, at a given new position q, which original B index is there? That is f_k(q) = f_{k-1}(p) where p is the old position that moved to q. Since reversal is bijective, for each new position q, there is exactly one old position p such that after reversal, element at old p moves to q. The relationship is: if q in [L,R], then p = reflect(q) (since reflect is involution), else p = q. Because if we reverse, the element at old position p goes to new position q = reflect(p) if p in interval; equivalently, p = reflect(q). So indeed f_k(q) = f_{k-1}( reflect(q) ) if q in [L,R], else f_{k-1}(q). So to compute f_m(i), we can start with q = i and apply operations in reverse order? Actually we need to apply from k=1 to m: f_k depends on f_{k-1}. So we can iterate k from 1 to m, updating a mapping on positions? But that would require updating all positions each step, which is O(n*m). However we can compute f_m(i) for a specific i by simulating its path: Starting with p = i (the position in A). Then we process operations from m down to 1? Let's see: We want to know which original B index ends at position i after all ops. That is, after applying op_1, op_2, ..., op_m, the element originally at some position x ends up at i. We can track the inverse: start at i, and undo operations backwards: start from final array after op_m, undo op_m (which is same as applying op_m, because it's its own inverse) to get position before op_m, then undo op_{m-1}, etc., back to original B. Undoing op_k means applying op_k to the position mapping (since op is involution). So if we let p be the current position in the array after some steps, to go backwards one operation (undo op_k), we apply op_k to p (since op_k(p) gives the position before that operation? Need to be careful with direction.

    Better: Consider we have final array C_m = A. To find which element from C_{m-1} ended at position i in C_m, we note that C_m = op_m(C_{m-1}). So if we apply op_m to C_m, we get C_{m-1}. That means the element at position i in C_m came from position j = op_m(i) in C_{m-1} (because op_m is reversal: it swaps positions). Since op_m is symmetric: applying op_m to the array transforms it; the element that was at position j in C_{m-1} moves to position i = op_m(j) in C_m. So the inverse mapping is also op_m: j = op_m(i). So to trace back, starting from i0 = i (position in A), after applying op_m we get position i1 = op_m(i0) that was the position in C_{m-1}. Then apply op_{m-1} to i1 to get position in C_{m-2}, etc. After applying op_1 to i_{m-1} we get position i_m in C_0 = B. So the original B index is i_m = (op_1 ∘ op_2 ∘ ... ∘ op_m)(i). Wait order: we apply op_m then op_{m-1} ... then op_1? Because we go backwards: from C_m to C_{m-1} we apply op_m; then from C_{m-1} to C_{m-2} apply op_{m-1}, etc. So overall original index = op_1(op_2(...op_m(i)...)). That is the composition in reverse order of the forward ops. But earlier we defined f_m(i) as the origin after applying op_1..op_m to B, which gave A = C_m. So to get origin from B for a given i in A, we need to apply the inverse of that composition to i. Inverse of op_1..op_m is op_m..op_1. So original index = (op_m ∘ ... ∘ op_1)(i). Let's verify with sample: n=7, i=1. We want A[1] = ? From B? Let's compute using the trace back method: start i0=1 (position in A). Apply op_4? Actually m=4. So first we need to go from A=C4 to C3 by applying op4. But note: op4 is reversal of segment [4,4] (since i=4, n-i+1=4) which does nothing. So i1 = op4(1)=1. Then op3: reverse [3,5]; for i=1, not in segment, so stays 1. So i2=1. Then op2: reverse [2,6]; 1 not in [2,6] so stays 1. Then op1: reverse whole [1,7]; so i3 = reflect(1) = 7. So original index = 7. That means A[1] should be B[7] = 2. Indeed A[1]=2. So that matches: original index = (op1 ∘ op2 ∘ op3 ∘ op4)(1) = 7. So the mapping from A index to B index is P(i) = (op_1 ∘ op_2 ∘ ... ∘ op_m)(i). So to compute A from B, we need to assign A[i] = B[ P(i) ].

    Thus we need to compute P(i) efficiently for all i (1..n). P(i) is obtained by applying reversals for k=1..m in that order? Actually we applied op_1 last? Wait we applied op_m first then ... op_1 to trace back. But the composition we computed was op_1 after op_2 after ... after op_m? Let's re-derive carefully.

    Let T = op_1 ∘ op_2 ∘ ... ∘ op_m. Then A = T(B). So element at position i in A came from position j in B where j = T^{-1}(i). Since T^{-1} = op_m ∘ ... ∘ op_1. So j = (op_m ∘ ... ∘ op_1)(i). That's what we got: op_m then ... op_1 applied to i gives original B index. So P(i) = (op_m ∘ ... ∘ op_1)(i). Alternatively, we can think of processing i through operations in reverse order: start with i, then apply op_m, then op_{m-1}, ..., op_1. That's exactly the sequence we did: op4 (i=4? Actually for n=7, m=4, we applied op4 (which does nothing), op3, op2, op1 -> got 7. So P(i) = op1(op2(op3(op4(i)))...). Wait order: we applied op4 first, then op3, then op2, then op1. That's op1 ∘ op2 ∘ op3 ∘ op4? Composition: (op1 ∘ op2 ∘ op3 ∘ op4)(i) means first apply op4, then op3, then op2, then op1. That is exactly op1(op2(op3(op4(i)))? Actually careful: (f ∘ g)(x) = f(g(x)). So (op1 ∘ op2 ∘ op3 ∘ op4)(i) = op1(op2(op3(op4(i)))). That means apply op4 first, then op3, then op2, then op1. So that's what we did: op4(i) -> i, op3(i) -> i, op2(i) -> i, op1(i) -> 7. So P(i) = (op1 ∘ op2 ∘ op3 ∘ op4)(i) = 7. So P = op1 ∘ op2 ∘ ... ∘ op_m (with op_m applied first inside). So indeed we need to compute P(i) for all i.

    Now, we can try to compute P(i) in closed form. Since each op_k reflects position p if p ∈ [k, n-k+1] to n+1-p, else leaves unchanged. And note that these intervals are nested: as k increases, the interval shrinks. So for a given i, we can simulate these checks for k=m down to 1? Actually to compute P(i) we need to apply op_1 after op_2 after ... after op_m? But careful: P = op1 ∘ op2 ∘ ... ∘ op_m. That means first apply op_m, then op_{m-1}, ..., then op_1. So we can simulate by starting with x = i and for k = m down to 1: if x in [k, n-k+1] then x = n+1 - x. Then after loop, P(i)=x. But note: the condition and reflection use current x, not the original i; the mapping is composition. So we need to apply sequentially.

    Thus for each i, we can compute P(i) by iterating k from m down to 1, checking if x lies in [k, n-k+1] and reflecting if so. That's O(m) per i, total O(n*m) which is too slow (n up to 2e5, m ~ 1e5 => O(2e10)).

    We need a faster way. Perhaps the composition simplifies because the intervals are nested and the reflections might cause the path to bounce. We can consider the effect of all these operations on an index as: it's like taking i and reflecting it each time it lies within a certain interval. Since intervals are shrinking, after some point, the index might settle.

    Alternatively, we can try to compute the final permutation by analyzing the process as a kind of "folding" of the index line. For each i, the operations apply reflections based on whether current position is >= k and <= n-k+1. As k decreases (since we apply from high k to low), we start with small intervals? Actually when k is large (close to m), the interval [k, n-k+1] is small (maybe just middle). For i not in the middle, early steps (with large k) may not affect it. Then as k decreases, the interval expands, eventually covering i, and then reflecting may move it to a symmetric position, which may then be inside or outside for later (smaller k) steps.

    We can try to understand the net effect by considering the sequence of reflections as k runs from m down to 1. At step k, if current x is between k and n-k+1 inclusive, we replace x with n+1-x. This is exactly the operation of "if x is within the current active segment, flip it". The active segment starts from the middle (when k=m) which is roughly the center (if n odd, segment is single element at middle; if even, maybe two elements). Then as k decreases, the segment expands outward. So it's like we have a process where we start with index i, and we progressively consider expanding boundaries; each time the index lies within the expanding boundary, we reflect it to the symmetric position. This is reminiscent of the effect of repeatedly "folding" the array: think of the array as a line, and we repeatedly fold the ends inward? But here the reflection flips the index across the center, possibly moving it to a different region.

    Let's simulate for various i and n to see pattern.

    Define n. For each i, compute P(i) by simulation for small n to detect pattern.

    We'll do by brute for small n. But let's try to reason.

    Let’s denote function f_k(x) = result after applying ops from k down to 1? Actually we want P(i) = apply for k=m...1.

    Alternatively, we can think about the transformation as: after all ops, what is the mapping? Could it be that P(i) equals something like: if i <= (n+1)/2 then P(i) = i*2 - 1? No.

    We can compute for a few n.

    Case n=1: m=1. Only op1: reverse [1,1] does nothing. So P(1)=1.

    n=2: indices 1,2. m = floor((2+1)/2)=1? Actually (n+1)/2 = 1.5 floor = 1. So only op1: reverse [1,2]. So P = op1. So P(1)=2, P(2)=1.

    So for n=2, A = op1(B) -> A[1]=B[2], A[2]=B[1]. That matches applying reverse whole array.

    n=3: m = floor((3+1)/2)=2. ops: op1 reverse [1,3]; op2 reverse [2,2] (does nothing). So composition P = op1 ∘ op2 = op1. So P(1)=3, P(2)=2, P(3)=1. So A[1]=B[3], A[2]=B[2], A[3]=B[1].

    n=4: m = floor((4+1)/2)=2. ops: op1 reverse [1,4]; op2 reverse [2,3]. So P = op1 ∘ op2? Wait order: apply op2 then op1? Because P = op1 ∘ op2 means first apply op2 then op1. So we compute: For i, first apply op2: if i in [2,3] then x'=5-i (since n+1=5); else x'=i. Then apply op1: if x' in [1,4] (always) then x''=5-x'. So P(i) = 5 - (if i in [2,3] then 5-i else i). So:

    • i=1: op2 -> 1 (since not in [2,3]), then op1 -> 5-1=4.
    • i=2: op2 -> 5-2=3, then op1 -> 5-3=2.
    • i=3: op2 -> 5-3=2, then op1 -> 5-2=3.
    • i=4: op2 -> 4, then op1 -> 5-4=1. So P = [4,2,3,1]. So A[1]=B[4], A[2]=B[2], A[3]=B[3], A[4]=B[1]. Check with sample? Not given but we can test with example n=4? Not provided.

    Now sample n=7 we computed P(1)=7, P(2)=? Let's compute for i=2: start x=2. k=4 (op4 does nothing). k=3: interval [3,5]; 2 not in => x=2. k=2: interval [2,6]; 2 is in => x = 8-2=6 (n+1=8). So x=6. k=1: interval [1,7]; 6 is in => x=8-6=2. So P(2)=2. So A[2]=B[2]. i=3: x=3. k4: none; k3: [3,5], 3 in => x=8-3=5; k2: [2,6], 5 in => x=8-5=3; k1: [1,7], 3 in => x=8-3=5. So P(3)=5. i=4: x=4. k4: [4,4], 4 in => x=8-4=4? Actually reflect 4 -> 4 (since center). k3: [3,5], 4 in => x=8-4=4; k2: [2,6], 4 in => x=8-4=4; k1: [1,7], 4 in => x=8-4=4. So P(4)=4. i=5: symmetric to 3? x=5. k4: none? Actually k4: [4,4], 5 not in =>5; k3: [3,5], 5 in => reflect: 8-5=3; k2: [2,6], 3 in => reflect:8-3=5; k1: [1,7], 5 in => reflect:8-5=3. So P(5)=3. i=6: symmetric to 2? x=6. k4:5; k3: [3,5],6 not in =>6; k2:[2,6],6 in => reflect:2; k1:[1,7],2 in => reflect:6. So P(6)=6. i=7: P(7)=1. So mapping P: [7,2,5,4,3,6,1]. Check with sample: A[1]=B[7]=2, A[2]=B[2]=3, A[3]=B[5]=9, A[4]=B[4]=6, A[5]=B[3]=7, A[6]=B[6]=1, A[7]=B[1]=4. That matches sample output.

    So P seems to be: for positions, it's like swapping some pairs. For n=4, P: [4,2,3,1]. For n=5? Let's compute n=5 manually to see pattern.

    n=5, m = floor((5+1)/2)=3. ops: op1 reverse [1,5]; op2 reverse [2,4]; op3 reverse [3,3] (nothing). P = op1 ∘ op2 ∘ op3 = op1 ∘ op2. Compute: start from i, apply op3: none; op2: if i in [2,4] reflect (to 6-i); then op1: reflect always? Actually op1 interval [1,5] always, reflect (6 - x). So P(i) = 6 - (if i in [2,4] then 6-i else i). So: i=1: op2->1, op1->5 => P=5 i=2: op2->4, op1->2 => P=2 i=3: op2->3, op1->3 => P=3 i=4: op2->2, op1->4 => P=4 i=5: op2->5, op1->1 => P=1 So P = [5,2,3,4,1].

    What about n=6? n=6, m= floor((6+1)/2)=3. ops: op1 [1,6]; op2 [2,5]; op3 [3,4]. P = op1 ∘ op2 ∘ op3. Compute stepwise: For i, apply op3: if i in [3,4] reflect to 7-i; then op2: if result in [2,5] reflect to 7 - result; then op1: reflect (always) to 7 - result. So we can compute each: i=1: op3:1 (not in) ->1; op2:1 not in [2,5] ->1; op1:7-1=6 => P=6. i=2: op3:2 ->2; op2:2 in [2,5] -> reflect:7-2=5; op1: reflect:7-5=2 => P=2. i=3: op3:3 in [3,4] -> reflect:7-3=4; op2:4 in [2,5] -> reflect:7-4=3; op1: reflect:7-3=4 => P=4. i=4: op3:4 in [3,4] -> reflect:7-4=3; op2:3 in [2,5] -> reflect:7-3=4; op1: reflect:7-4=3 => P=3. i=5: op3:5 not in ->5; op2:5 in [2,5] -> reflect:7-5=2; op1: reflect:7-2=5 => P=5. i=6: op3:6 ->6; op2:6 not in [2,5] ->6; op1:7-6=1 => P=1. So P = [6,2,4,3,5,1].

    n=7 we have [7,2,5,4,3,6,1] n=8: Let's compute n=8, m=4. ops: op1 [1,8]; op2 [2,7]; op3 [3,6]; op4 [4,5]. P = op1 ∘ op2 ∘ op3 ∘ op4. Let's compute systematically. We can code mental simulation: For each i from 1 to 8, apply op4, op3, op2, op1.

    n=8, n+1=9. Define f(i): x = i Step op4: L=4,R=5, if x in [4,5] then x=9-x. Step op3: L=3,R=6, if x in [3,6] then x=9-x. Step op2: L=2,R=7, if x in [2,7] then x=9-x. Step op1: L=1,R=8, if x in [1,8] then x=9-x (always except maybe? but always because all indices in 1..8, so always reflect) Thus after op1, always reflect. So final x = 9 - (value after op2). Actually we can compute stepwise.

    We'll compute each i:

    i=1: op4:1 not in [4,5] ->1 op3:1 not in [3,6] ->1 op2:1 not in [2,7] ->1 op1:9-1=8 => P=8

    i=2: op4:2 ->2 op3:2 not in [3,6] ->2 op2:2 in [2,7] -> reflect:9-2=7 op1:9-7=2 => P=2

    i=3: op4:3 ->3 op3:3 in [3,6] -> reflect:9-3=6 op2:6 in [2,7] -> reflect:9-6=3 op1:9-3=6 => P=6

    i=4: op4:4 in [4,5] -> reflect:9-4=5 op3:5 in [3,6] -> reflect:9-5=4 op2:4 in [2,7] -> reflect:9-4=5 op1:9-5=4 => P=4

    i=5: op4:5 in [4,5] -> reflect:9-5=4 op3:4 in [3,6] -> reflect:9-4=5 op2:5 in [2,7] -> reflect:9-5=4 op1:9-4=5 => P=5

    i=6: op4:6 not in [4,5] ->6 op3:6 in [3,6] -> reflect:9-6=3 op2:3 in [2,7] -> reflect:9-3=6 op1:9-6=3 => P=3

    i=7: op4:7 ->7 op3:7 not in [3,6] ->7 op2:7 in [2,7] -> reflect:9-7=2 op1:9-2=7 => P=7

    i=8: op4:8 ->8 op3:8 not in [3,6] ->8 op2:8 not in [2,7] ->8 op1:9-8=1 => P=1

    So P = [8,2,6,4,5,3,7,1].

    Check with sample second input: n=8 B = [6,1,4,2,5,6,9,2]. Then A should be B[P(i)]: A[1]=B[8]=2, A[2]=B[2]=1, A[3]=B[6]=6, A[4]=B[4]=2, A[5]=B[5]=5, A[6]=B[3]=4, A[7]=B[7]=9, A[8]=B[1]=6 -> [2,1,6,2,5,4,9,6]. That matches sample output. Good.

    So we have derived P mapping. Now we need to compute A[i] = B[ P(i) ] efficiently.

    Observation: P seems to have a pattern: For i from 1..n, P(i) is something like: if i is odd? Let's list for n=8: i:1 2 3 4 5 6 7 8; P:8 2 6 4 5 3 7 1. For n=7: P:7 2 5 4 3 6 1. For n=6: P:6 2 4 3 5 1. For n=5: P:5 2 3 4 1. For n=4: P:4 2 3 1. For n=3: P:3 2 1. For n=2: P:2 1. For n=1: P:1.

    Pattern: It looks like the mapping is: left half positions map to even or odd? Let's think: For n=8, indices 1,2,3,4,5,6,7,8. The mapping seems to be: 1<->8, 2 stays 2, 3<->6, 4 stays 4? Actually 4 maps to 4, 5 maps to 5, 6 maps to 3, 7 maps to 7, 8 maps to 1. So some symmetric swaps.

    It appears that for even n, the mapping results in: for positions i from 1 to n/2: if i is even? Actually let's list i and P(i) for n=8: i=1 -> 8 (n - 0?) i=2 -> 2 i=3 -> 6 (n-2) i=4 -> 4 i=5 -> 5 i=6 -> 3 (n-5? actually n-5=3) i=7 -> 7 i=8 -> 1

    So pattern: i and n+1-i swapped for some i, and others remain? For n=8, pairs: (1,8) swapped? Actually P(1)=8, P(8)=1, so swapped. (2,2) fixed. (3,6) swapped? P(3)=6, P(6)=3, swapped. (4,4) fixed. (5,5) fixed? Actually P(5)=5, P(5) fixed, but what about P(7)? 7 fixed. So only some pairs swapped.

    n=7: i=1->7, i=7->1 swapped. i=2->2 fixed. i=3->5, i=5->3 swapped. i=4->4 fixed. i=6->6 fixed? Actually i=6->6 fixed? P(6)=6, so yes. So pattern: indices 2 fixed, 4 fixed, 6 fixed? Actually for odd n, center fixed.

    n=6: i=1->6, i=6->1 swapped. i=2->2 fixed. i=3->4, i=4->3 swapped. i=5->5 fixed? P(5)=5 fixed, but i=5? i=5 fixed. So pattern: (1,6), (3,4) swapped; 2 and 5 fixed.

    n=5: i=1->5, i=5->1 swapped. i=2->2 fixed. i=3->3 fixed. i=4->4 fixed. So (1,5) swapped; others fixed.

    n=4: (1,4) swapped; 2 fixed? P(2)=2 fixed; 3 fixed? P(3)=3 fixed.

    n=3: (1,3) swapped; 2 fixed.

    n=2: (1,2) swapped.

    So it seems that the mapping results in pairwise swaps for some pairs based on parity? Let's list which indices are swapped: For n=8, swapped pairs: (1,8), (3,6), (5,5?) no, (5,5) fixed, (7,7) fixed, (2,2) fixed, (4,4) fixed. Actually (5,5) fixed, (7,7) fixed. So swaps happen for i=1,3? And i=6,8? The pattern might be: positions that are at odd distance from left? Let's formalize.

    We can attempt to derive P(i) formula. The process is: P(i) = apply for k from m down to 1: if current x in [k, n-k+1] then x = n+1 - x. Since the intervals are nested and symmetric, maybe the net effect is that each index i gets mapped to either i or n+1-i depending on something like the number of times it gets reflected, mod 2. The number of times it gets reflected depends on how many intervals contain the current position at each step. But note that after a reflection, the position changes, and might affect subsequent containment tests. However, interestingly, it seems that for many i, the number of reflections is even, resulting in i mapping to itself, or odd resulting in n+1-i.

    But we see that for n=8, i=2 maps to 2 (even reflections?), i=4 maps to 4, i=5 maps to 5, i=7 maps to 7. So these are fixed. i=1 maps to 8, i=3 maps to 6, i=6 maps to 3, i=8 maps to 1. So only indices 1,3,6,8 are swapped? Actually 1<->8, 3<->6. So the fixed ones are 2,4,5,7. That seems like indices that are even? 2 even fixed, 4 even fixed, but 6 even swapped? 6 swapped, so not just parity. 5 odd fixed, 7 odd fixed. So not parity.

    Let's try to compute the number of times an index gets reflected along the process. Could it depend on the binary representation? Possibly it's determined by whether i is less than or greater than (n+1)/2 and the "depth" of nested intervals.

    Another way: Since the operations are symmetric, maybe the mapping P can be described as: for i from 1 to n, define L = i, R = n+1-i. Then P(i) = if i is odd? Not consistent.

    Maybe we can derive P(i) by analyzing the effect of all operations as a permutation that is the composition of these reversals. Note that each operation op_k is a reflection about the center on the subarray [k, n-k+1]. Composition of such reflections might have a simple structure like: after all operations, the array A can be obtained from B by a specific reordering: you take elements from B in the order: last, first, second last, second, third last, third, ...? But we saw that didn't match.

    Let's test that alternative: For n=8, taking B and outputting: B[8], B[1], B[7], B[2], B[6], B[3], B[5], B[4] would be: [2,6,9,1,5,4,6,2]? Actually B = [6,1,4,2,5,6,9,2]; that order gives: 2,6,9,1,5,4,6,2 = [2,6,9,1,5,4,6,2] which is not the output [2,1,6,2,5,4,9,6]. So not that.

    Maybe it's: B[1], B[n], B[2], B[n-1], B[3], B[n-2], ...? That would be: 6,2,1,9,4,6,2,5? Not.

    Observing the mapping P: For n=8, the order of indices in A from B is: 8,2,6,4,5,3,7,1. So the sequence is: start from last, then second, then second last? Actually: 8,2,6,4,5,3,7,1. Not simple alternating.

    But we notice that for even n, the mapping seems to be: for i from 1 to n, if i is odd and i <= n/2? Let's check: i=1 (odd) maps to n (8). i=3 (odd, <=4) maps to n-2 (6). i=5 (odd, >4?) maps to 5 (fixed). i=7 (odd, >4) maps to 7 (fixed). For even i: i=2 maps to 2 (fixed), i=4 maps to 4, i=6 maps to 3? Actually 6 is even but maps to 3 (odd). So not simply parity.

    Maybe the mapping depends on the binary representation of i-1? Or maybe we can compute P by: write i in binary and reverse bits? Unlikely.

    We can try to find a closed-form formula by analyzing the process mathematically.

    We need to compute x = P(i) = f(i) after applying reflections from k=m down to 1.

    Define L_k = k, R_k = n - k + 1. At step k (starting from m down to 1), if L_k ≤ x ≤ R_k then x = n+1 - x.

    We can think of this as we have a number x initially i, and we go through k=m, m-1, ..., 1. At each step, if x is between k and n-k+1 inclusive, we reflect.

    Observing that the intervals are nested: [1, n] ⊇ [2, n-1] ⊇ ... ⊇ [m, n-m+1]. So as k decreases, the interval expands. So at step m (the smallest interval), we check if x is in the innermost interval. Then at step m-1, we check if the (possibly updated) x is in the next larger interval, etc.

    Because the reflections are symmetric, we can consider the effect as a function of the original i's position relative to the center.

    Let’s denote c = (n+1)/2 (center as a real number). Each reflection maps x to n+1-x, which is the mirror across c. So after each reflection, the value flips to the symmetric position.

    Now, the process: Starting from i, we apply a sequence of possible mirrors depending on whether x lies in certain intervals. This resembles the process of taking a number and repeatedly reflecting it across the center whenever it lies inside a shrinking symmetric interval? Actually intervals are expanding as we go from high k to low k, but we process from high k to low. Equivalent to: For k from m down to 1, if current x is within [k, n-k+1], reflect.

    Observing that for a given i, many steps will not cause reflection because i may be outside the interval at that step. But after a reflection, x may move to a different side, possibly entering or leaving future intervals.

    We need a faster method to compute P(i) for all i in O(n). There might be a way to compute the permutation by simulating the process on all positions simultaneously using a kind of "fold" technique: we can process the operations in reverse order (the order we need) but update ranges efficiently.

    Given the operations are reversals on intervals, and we want the final permutation after applying them to the indices, we could use a balanced binary tree to simulate the sequence of reversals on the array of indices [1..n]. That is, we start with an array representing the identity permutation (positions 1..n). Then we apply op1 (reverse [1,n]), op2 (reverse [2,n-1]), ..., op_m (reverse [m, n-m+1]) to this array. The resulting array after all operations will be the permutation P (since we applied the same operations to the positions). Wait check: We want P(i) such that A[i] = B[ P(i) ]. That P is the mapping from A index to B index. We derived that P = op1 ∘ op2 ∘ ... ∘ op_m (with op_m applied first). But we can also think: Start with an array arr of size n, initially arr[pos] = pos (the index in B). Then for k=1 to m (in that order) we apply reverse on segment [k, n-k+1] to arr. After all operations, arr[i] will be what? Let's test with n=7: Initially arr = [1,2,3,4,5,6,7]. Apply op1 (reverse [1,7]): arr = [7,6,5,4,3,2,1]. Apply op2 (reverse [2,6]): arr = [7,2,3,4,5,6,1] (since segment 2..6 is [6,5,4,3,2] reversed -> [2,3,4,5,6]). Apply op3 (reverse [3,5]): arr = [7,2,5,4,3,6,1]. Apply op4 (reverse [4,4]): arr unchanged = [7,2,5,4,3,6,1]. This matches P we computed: [7,2,5,4,3,6,1]. So indeed applying the operations op1,op2,...,op_m to the identity array yields the permutation P (the mapping from A index to B index). But careful: In this simulation we applied op1 first then op2 then op3 then op4, while earlier we said P = op1 ∘ op2 ∘ op3 ∘ op4 (with op4 first inside?). Wait we just applied op1 then op2 then op3 then op4. That corresponds to composition (op4 ∘ op3 ∘ op2 ∘ op1) applied to the array? Actually if we start with identity array I, then apply operation op1, we get new array = op1(I). Then apply op2: we get op2(op1(I)) = (op2 ∘ op1)(I). Then op3: (op3 ∘ op2 ∘ op1)(I). Then op4: (op4 ∘ op3 ∘ op2 ∘ op1)(I). So the final array is (op4 ∘ op3 ∘ op2 ∘ op1)(I). That's the composition where the first applied is op1, then op2, etc. That gives Q = op4 ∘ op3 ∘ op2 ∘ op1. But we computed earlier