Skip to content
TheChatArchiveThe Chat Archive
ClaudeClaude Haiku 4.5· anthropicHugging Face Frontier Reasoning Traces

Derive the Langmuir isotherm assuming monolayer coverage, equivalent sites, and no…

  1. User

    Derive the Langmuir isotherm assuming monolayer coverage, equivalent sites, and no interaction. Equilibrium balances adsorption and desorption rates.

  2. Claude Assistant

    This is a classic request in physical chemistry regarding adsorption phenomena. I need to derive the Langmuir isotherm from first principles, starting with equilibrium between adsorption and desorption. Let me carefully work through this derivation.

    Langmuir Isotherm Derivation

    Starting Assumptions:

    1. Monolayer coverage: Only one layer of adsorbate molecules adsorbs on the surface
    2. Equivalent sites: All adsorption sites are identical and independent
    3. No interaction: No lateral interactions between adsorbed molecules (or adsorbate-adsorbate interactions are negligible)
    4. Equilibrium: Adsorption rate = Desorption rate

    Step 1: Set up the equilibrium

    Consider a simple adsorption-desorption process:

    A(g) + S ⇌ A-S

    Where:

    • A(g) = adsorbate molecule in gas phase
    • S = vacant site on surface
    • A-S = adsorbed molecule on site

    Step 2: Define rate processes

    Adsorption rate = rads=kaP[S]r_{ads} = k_a P [S]

    Where:

    • kak_a = adsorption rate constant
    • PP = partial pressure of adsorbate
    • [S][S] = concentration/number of vacant sites

    Desorption rate = rdes=kd[A-S]r_{des} = k_d [\text{A-S}]

    Where:

    • kdk_d = desorption rate constant
    • [A-S][\text{A-S}] = concentration/number of occupied sites

    Step 3: Apply equilibrium condition

    At equilibrium: rads=rdesr_{ads} = r_{des}

    kaP[S]=kd[A−S]k_a P [S] = k_d [A-S]

    Step 4: Define equilibrium constant

    Rearranging: [A−S][S]=kakdP=KP\frac{[A-S]}{[S]} = \frac{k_a}{k_d} P = K P

    where K=kakdK = \frac{k_a}{k_d} is the adsorption equilibrium constant.

    Step 5: Define total site balance

    Let N0N_0 = total number of adsorption sites. The surface sites are partitioned between vacant and occupied:

    N0=[S]+[A−S]N_0 = [S] + [A-S]

    So [S]=N0−[A−S][S] = N_0 - [A-S]

    Step 6: Substitute into equilibrium equation

    [A−S]N0−[A−S]=KP\frac{[A-S]}{N_0 - [A-S]} = K P

    [A−S]=KP(N0−[A−S])[A-S] = K P(N_0 - [A-S])

    Expanding and solving for occupied sites gives the coverage in terms of pressure and the equilibrium constant.

    [A−S]=KPN01+KP[A-S] = \frac{K P N_0}{1 + KP}

    Step 7: Define surface coverage

    Coverage θ\theta represents the fraction of occupied sites:

    θ=[A−S]N0=KP1+KP\theta = \frac{[A-S]}{N_0} = \frac{KP}{1 + KP}

    This is the Langmuir Isotherm. The equation can be expressed using concentration CC as θ=KC1+KC\theta = \frac{KC}{1 + KC}, or in terms of adsorbed amount qq and monolayer capacity qmq_m as q=qmKP1+KPq = \frac{q_m KP}{1 + KP}.

    Physical Interpretation:

    At low pressures where KP≪1KP \ll 1, coverage becomes linear: θ≈KP\theta \approx KP. When pressure is high and KP≫1KP \gg 1, the surface saturates with θ≈1\theta \approx 1. The half-coverage point occurs at P=1/KP = 1/K where θ=0.5\theta = 0.5.

    Alternative Derivation using Thermodynamics:

    The equilibrium constant K=[A−S][S]PK = \frac{[A-S]}{[S]P} emerges from setting the chemical potentials of gas and adsorbed phases equal at equilibrium: μg=μa\mu_g = \mu_a.

    Derivation of the Langmuir Isotherm

    Physical Model and Assumptions

    The Langmuir model considers a simple adsorption equilibrium:

    \ceA(g)+S<=>A−S\ce{A(g) + S <=> A-S}

    Where:

    • A(g) = adsorbate molecule in gas phase
    • S = vacant surface site
    • A-S = adsorbed species

    Key assumptions:

    1. Monolayer adsorption only
    2. All sites are equivalent and independent
    3. No lateral interactions between adsorbed molecules
    4. Dynamic equilibrium at the surface

    Kinetic Equilibrium Derivation

    Step 1: Rate Balance

    Adsorption rate: rads=kaP⋅[S]r_{ads} = k_a P \cdot [S]

    Desorption rate: rdes=kd⋅[A-S]r_{des} = k_d \cdot [A\text{-}S]

    Where kak_a, kdk_d are rate constants, PP is partial pressure, brackets denote site densities.

    Step 2: Equilibrium Condition

    At equilibrium: rads=rdesr_{ads} = r_{des}

    kaP[S]=kd[A-S]k_a P[S] = k_d[A\text{-}S]

    Rearranging: [A-S][S]=kakdP=KP\frac{[A\text{-}S]}{[S]} = \frac{k_a}{k_d}P = KP

    where the adsorption equilibrium constant is: K=kakdK = \frac{k_a}{k_d}

    Step 3: Site Balance

    Total sites: N0=[S]+[A-S]N_0 = [S] + [A\text{-}S]

    Therefore: [S]=N0−[A-S][S] = N_0 - [A\text{-}S]

    Step 4: Solve for Occupied Sites

    Substituting into the equilibrium expression:

    [A-S]N0−[A-S]=KP\frac{[A\text{-}S]}{N_0 - [A\text{-}S]} = KP

    [A-S]=KP(N0−[A-S])[A\text{-}S] = KP(N_0 - [A\text{-}S])

    [A-S](1+KP)=KPN0[A\text{-}S](1 + KP) = KPN_0

    [A-S]=KPN01+KP[A\text{-}S] = \frac{KPN_0}{1 + KP}

    Step 5: Define Coverage

    Surface coverage θ\theta (fraction of sites occupied):

    θ=KP1+KP\boxed{\theta = \frac{KP}{1 + KP}}

    This is the Langmuir Isotherm in pressure form.


    Alternative Forms

    Using Concentration:

    θ=KC1+KC\theta = \frac{KC}{1 + KC}

    Using Adsorption Capacity:

    q=qmKP1+KPorq=qmKC1+KCq = \frac{q_m KP}{1 + KP} \quad \text{or} \quad q = \frac{q_m KC}{1 + KC}

    where qmq_m is the monolayer saturation capacity.

    Linear Form (for fitting data):

    Pq=1Kqm+Pqm\frac{P}{q} = \frac{1}{Kq_m} + \frac{P}{q_m}


    Physical Behavior

    RegimeConditionBehavior
    Low PKP≪1KP \ll 1θ≈KP\theta \approx KP (Henry's Law)
    High PKP≫1KP \gg 1θ≈1\theta \approx 1 (saturation)
    Half-saturationP=1/KP = 1/Kθ=0.5\theta = 0.5

    Limitations

    • No account for:

      • Lateral interactions (real systems often have adsorbate-adsorbate interactions)
      • Multilayer adsorption (BET addresses this)
      • Adsorbent heterogeneity (different site energies)
      • Temperature effects on adsorption geometry
    • Works best for: Physical adsorption on uniform surfaces at moderate pressures

    The Langmuir model remains foundational despite limitations, serving as the basis for more sophisticated models like BET and Temkin isotherms.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.