Divisor is the Conquerer is a solitaire card game. Although this simple game itself is a…
- User
Divisor is the Conquerer is a solitaire card game. Although this simple game itself is a great way to pass one’s time, you, a programmer, always kill your time by programming. Your task is to write a computer program that automatically solves Divisor is the Conquerer games. Here is the rule of this game:
First, you randomly draw N cards (1 ≤ N ≤ 52) from your deck of playing cards. The game is played only with those cards; the other cards will not be used.
Then you repeatedly pick one card to play among those in your hand. You are allowed to choose any card in the initial turn. After that, you are only allowed to pick a card that conquers the cards you have already played. A card is said to conquer a set of cards when the rank of the card divides the sum of the ranks in the set. For example, the card 7 conquers the set {5, 11, 12}, while the card 11 does not conquer the set {5, 7, 12}.
You win the game if you successfully play all N cards you have drawn. You lose if you fails, that is, you faces a situation in which no card in your hand conquers the set of cards you have played. Input
The input consists of multiple test cases.
Each test case consists of two lines. The first line contains an integer N (1 ≤ N ≤ 52), which represents the number of the cards. The second line contains N integers c1 , . . . , cN (1 ≤ ci ≤ 13), each of which represents the rank of the card. You may assume that there are at most four cards with the same rank in one list.
The input is terminated by a line with a single zero.
Output
For each test case, you should output one line. If there are any winning strategies for the cards of the input, print any one of them as a list of N integers separated by a space.
If there is no winning strategy, print “No”.
Example
Input
5 1 2 3 3 7 4 2 3 3 3 0
Output
3 3 1 7 2 No
Assistant
We need to write a program to solve the game: Given N cards (ranks 1..13, each at most four times). We need to find an ordering (permutation) such that for each prefix (starting from the second card?), the condition is: after having played some set of cards, the next card must conquer the set of already played cards. The definition: "A card is said to conquer a set of cards when the rank of the card divides the sum of the ranks in the set." So if we have already played a set S (with sum sum(S)), and we pick a new card with rank r, we need r divides sum(S). But careful: The rule says: "After that, you are only allowed to pick a card that conquers the cards you have already played." That means the new card conquers the set of already played cards. So r must divide sum(S). Note: sum(S) is the sum of ranks of already played cards.
But is the condition applied from the first card? The initial turn you can pick any card. So first card no constraint. Then second card must conquer the set containing only first card: i.e., rank of second card divides rank of first. Then third card must conquer set containing first two cards, i.e., rank divides sum of first two ranks, etc.
We need to find a permutation of all cards (or sequence) such that for each step i from 2..N: c_i divides sum_{j=1}^{i-1} c_j.
If such sequence exists, output any one. Otherwise output "No".
Constraints: N up to 52, ranks up to 13. Number of test cases unknown but presumably not huge.
This is like a Hamiltonian path problem with constraints based on divisibility. Since N is small (max 52) but can be up to 52, we need an algorithm that can find a feasible sequence or determine none. Brute force over permutations 52! impossible.
We need to treat this as a search/backtracking with pruning. Since each rank is small and sums grow, we can do DP? Actually state: which cards have been used? That's 2^52 impossible.
But note that cards are grouped by rank, and there are only 13 possible ranks. The count per rank is at most 4. So total distinct types of cards = 13, each with multiplicity up to 4. So the state could be a multiset: a vector of counts for ranks 1..13. The number of possible states is at most (4+1)^13 = 5^13 ≈ 1220703125, too large. But we can prune heavily and many states unreachable. However we can also use memoization/DP with bitmask representing counts? But 5^13 is 1.2e9, still too large. But we can compress because sum of counts is up to 52, but number of multisets is combinatorial: number of ways to distribute 52 into 13 buckets each max 4. That's limited. Actually the total number of distinct multisets (given max 4 per rank) is the number of combinations with repetition: choose 13 from (52+13-1)? Not straightforward. But we can compute upper bound: The number of ways to assign counts (0..4) to 13 ranks with total sum N (variable). Over all N, the total number of states across all N is sum_{N=0}^{52} number of integer solutions to x1+...+x13 = N, 0 <= xi <= 4. That number is the coefficient of x^N in (1+x+x^2+x^3+x^4)^13. Sum over N from 0 to 52 gives total number of possible count vectors = (5)^13? Actually if we allow any sum up to 52, but the constraint xi <=4 limits to exactly 5^13 if we ignore sum constraint. Because each xi can be 0..4 independent? However the sum can exceed 52? But max sum if each xi=4 is 52, so all vectors with xi in [0,4] automatically have sum <=52. So indeed the set of all vectors with each xi between 0 and 4 inclusive is exactly the whole state space, and its size is exactly 5^13 = 1220703125, about 1.2 billion. That's too large to store.
But we might not need to explore all states; typical backtracking with pruning might be okay given N<=52 and ranks small? We need to be careful: worst-case might be large but maybe the constraints allow backtracking with heuristics. However we need a robust solution.
We can think of this as constructing a sequence meeting divisibility constraints. Since ranks are small, the sum grows gradually. The condition r divides sum(prev). That means that r must be a divisor of current sum. So the possible next cards are those whose ranks divide the current sum, and we have those cards remaining.
We can do a depth-first search with memoization on state (counts vector) plus current sum? Actually the feasibility of a state (remaining multiset, current sum) might be computed. However state space includes sum up to max possible sum: maximum sum of all cards is at most 134=52? Wait each rank up to 13, 4 each max, so max total sum = sum_{r=1}^{13} r * 4 = 4 * (1314/2) = 4 * 91 = 364. Actually 1+2+...+13 = 91, times 4 = 364. So sum can be up to 364. That's not huge. So state: counts vector (13 numbers 0..4) plus current sum. Sum ranges from 0 to 364. The number of possible sum values is 365. Multiply by 5^13 yields huge.
But perhaps we can use DP with bitmask that encodes which specific cards are used? But 52 bits state is still 2^52 ~ 4.5e15 impossible.
Alternative approach: This problem is similar to finding a Hamiltonian path in a directed graph where vertices are cards (N up to 52) and edges from set of already used? Actually not; constraints depend on the entire set already selected, not just last element. So it's not a typical graph path.
Observation: The condition only depends on the total sum of the played cards. So the state can be described by the multiset of remaining cards and the current sum. The current sum is determined by which cards have been played, but given the multiset, the sum is total_sum - sum_remaining? Actually if we have initial total sum S_total = sum of all cards. After playing some cards, the remaining sum is S_rem. Then current sum played = S_total - S_rem. So current sum is determined by the remaining multiset: current sum = total_sum - sum_rem. So the state can be captured solely by the multiset of remaining cards (since total_sum is fixed for the instance). Indeed, if we know which cards are remaining, we can compute the sum of played cards as total_sum - sum(remaining). So the state is just the multiset of remaining cards. That reduces dimension: we don't need to store current sum separately. So state = the counts of remaining cards. Number of states: at most 5^13 = 1.2e9, still too many.
But perhaps we can prune heavily by using symmetry and memoization with bitmask using base-5 encoding? But 1.2e9 is too large to store in memory, but maybe many states are unreachable? Possibly the search space is much smaller because of the divisibility condition. However worst-case could be large. Need a smarter approach.
Maybe we can transform the problem: We are looking for an ordering such that for each i>1, c_i divides prefix sum. This is reminiscent of constructing a sequence where each new element is a divisor of the cumulative sum. This is like building a sequence incrementally. Since the total sum is fixed, maybe there are necessary conditions: For example, if we have many high numbers, it might be impossible because the sum grows and large numbers require being divisors of earlier sum. Perhaps we can derive a necessary and sufficient condition and then a constructive algorithm.
Consider that the first card can be anything. After that, each card's rank must divide the sum so far. So the sum so far must be a multiple of the next card's rank. This implies that the cumulative sum after each step is a common multiple of many numbers.
One approach: We can think backwards. Suppose we consider the process in reverse: Starting from the full set, we remove the last card. If the sequence (c1,...,cN) is valid forward, then in reverse: If we have the whole set sum S_total, and we remove the last card cN, then before removal the sum of played cards (first N-1) is S_total - cN. And we know that cN divides (S_total - cN). So condition for reverse step: When we remove a card with rank r from a set with total sum S (where S is sum of all cards currently present), we require that r divides (S - r). Equivalently, r divides S? Actually r divides (S - r) iff r divides S (since if r|S then S ≡ 0 mod r, then S - r ≡ -r ≡ 0 mod r? Wait -r mod r = 0, so yes if r|S then S - r is also divisible by r. Conversely if r|(S - r) then S ≡ r (mod r) => S ≡ 0 (mod r) if and only if r|r? Actually S ≡ r mod r, so S mod r = r mod r = 0? Because r mod r = 0. So S ≡ 0 mod r? Actually if r divides (S - r), then (S - r) = k*r => S = (k+1)*r => S is divisible by r. Yes! So condition is equivalent to r divides S. So in reverse, we can remove any card whose rank divides the total sum of the current multiset. After removal, we get a new multiset with total sum S' = S - r, and we can continue. So the reverse process is: Starting from the full multiset, repeatedly remove a card whose rank divides the current total sum. The goal is to remove all cards (i.e., reverse order). This is symmetric to forward: In forward, you add a card that divides the current sum (the sum of already added). In reverse, you remove a card that divides the current total sum (i.e., the sum of all cards currently present). So both are similar.
Thus we need to find a permutation such that for each suffix (when considering reverse order), the last removed card's rank divides the total sum at that point. That is exactly the same as forward but with different interpretation: The condition for next removal is that r divides S (current total sum). That's perhaps easier to think because we start with full sum S_total, and we need to pick a card r that divides S_total to remove first, then continue.
Now, note that the condition r divides S is only dependent on the total sum and the card's rank. So in reverse, we need to find an ordering of removal such that at each step, the card we remove divides the current total sum.
Observation: This resembles a game where we need to reduce the sum by removing divisors. The sum decreases each time. The divisibility condition becomes stricter as sum shrinks? Possibly we can use a greedy approach: always remove the largest possible rank that divides the current sum? Or some systematic method.
Since ranks are small (max 13) and total sum at most 364, we might be able to do DP over subsets/multisets but with more pruning.
Given that the maximum N is 52, but the number of distinct ranks is only 13, we can treat the problem as: assign an order to the cards, but the constraint depends only on the multiset of played cards (or remaining). The state space of remaining counts (13 dimensions) is large but maybe the number of reachable states from any starting multiset is not huge? Not sure.
But we could consider using BFS/DFS with memoization using a hashed map for visited states. The worst-case might be many states, but perhaps given the divisibility condition, it's limited. For each test case we could attempt depth-first search with pruning, and if it gets too deep, but N max 52, recursion depth is 52, which is fine. Branching factor: at each step, the number of cards that can be played (or removed) is those ranks that divide the current sum. That is usually a small number (the divisors of the current sum that are present in remaining cards). Since sum is at most 364, the number of divisors is limited (max maybe around 24 for numbers up to 364? Actually 360 has many divisors: 24? 360 has 24 divisors, but ranks are only up to 13, so only those divisors <=13 and present. So branching factor limited.
Thus the search tree size could be manageable, especially if we do reverse search (removal). In reverse, we start with all cards. At each step, we need to choose a card to remove such that its rank divides current total sum. The number of choices is the number of cards with rank dividing current sum. That's at most 4 * number of ranks <=13, so at most 52? Actually maximum if sum divisible by many small ranks and we have many cards of those ranks. But typical might be moderate.
We can then perform a recursive search (DFS) with memoization of states (remaining multiset). The number of states visited could be large, but maybe we can store them using a bitmask representation: encode counts per rank in a 64-bit integer. Since each rank count 0-4 needs 3 bits (since 4 needs 3 bits 0..7), but we can pack into 52 bits? 13*3=39 bits, which fits in 64-bit. Or we could use base-5 encoding: 5^13 ~ 1.2e9, which fits in 32-bit? Actually 5^13 = 1220703125, which is about 1.2e9 < 2^31. So we can encode a state as an integer in base 5 (13 digits) each digit 0..4. That integer fits in 31 bits. So we can use an array or hash set to memoize visited states. 1.2e9 is too big for array, but we can use a hash table (e.g., unordered_set) to store only visited states. However potentially many states could be visited; worst-case might be large but maybe within time limits given typical test cases? Since 5^13 is theoretical max, but actual reachable states might be far less. However, we need to be cautious: there are up to multiple test cases. We could implement DFS with memoization (caching success/failure) and hope it's enough.
But let's analyze complexity more: The search is over sequences of removal of N cards. Each state is a multiset. The number of possible distinct multisets (with counts up to 4) is 5^13 = 1.2e9. But the number of states reachable from a given initial multiset might be significantly less, but could still be large? For example, if all ranks 1..13 appear with count 4, sum = 364. At each step, the divisor condition might be satisfied by many cards, leading to many possible removal orders. But how many distinct multisets? Each removal reduces one count of a specific rank. So the state space is all subsets of the multiset, i.e., all combinations of counts (with each count from 0 up to its original count). That's not 5^13 but product over ranks of (original count+1). Since original count max 4, but for each rank, count can be 0..original_i. So the number of reachable states is product_i (original_i + 1). Since sum of original_i = N, but product can be large. For example, if all ranks have count 4, then product = 5^13 = 1.2e9. So theoretically reachable states could be that many. But we would never explore all because many sequences may be dead ends, and we might prune with memoization. However DFS that explores all reachable states could be prohibitive. But maybe the problem expects a more clever approach rather than brute-force state search.
Let's examine constraints: N ≤ 52, but each rank ≤ 13, and each rank appears at most 4 times. This is typical of card games. Possibly there is a known necessary and sufficient condition: The sequence exists if and only if the total sum is divisible by the largest rank? Not exactly.
Let's test small examples. Input: 5 cards: 1,2,3,3,7. Output: 3 3 1 7 2. Let's verify: Start with 3 (sum=3). Next 3: 3 divides 3? 3 divides 3 => yes. Sum=6. Next 1: 1 divides 6? 1 divides any integer => yes. Sum=7. Next 7: 7 divides 7? yes. Sum=14. Next 2: 2 divides 14? yes. So works. Alternative sequences? Possibly many.
Second example: 4 cards: 2,3,3,3. Total sum = 11. Could there be a sequence? Let's test: Must start with some card. Suppose start 2: sum=2. Next card must divide 2: possible ranks are 1 or 2. But we have only 2,3,3,3; we have a 2 (another 2? only one 2? Actually there is only one 2? The list: 2,3,3,3. So we have a 2, but we used it first. So remaining: 3,3,3. None divides 2 (3 does not divide 2). So fails. Start with 3: sum=3. Next must divide 3: possible ranks 1,3. We have 3s. So pick a 3: sum=6. Next must divide 6: ranks that divide 6 among remaining: we have 2 (2 divides 6) and 3 (3 divides 6). But if we pick 3: sum=9. Next must divide 9: remaining card 2 (2 does not divide 9). So fail. If after sum=6 we pick 2: sum=8. Next must divide 8: remaining card 3 (3 does not divide 8). So fail. So no sequence.
Thus some sets are unsolvable.
We need to find a sequence if exists. Perhaps there is a known characterization: The game is similar to "Divisor game" or "Take-Away" but with multiple copies.
Alternative: Since the condition in reverse: r divides current total sum S. So at each step we can remove any card whose rank divides S. This is like we have a set of numbers, and we need to find an order of removal such that each removed number divides the current sum. This is similar to building a sequence where each number is a divisor of the sum of the remaining numbers (including itself). Could there be a greedy strategy: always remove the largest possible divisor? Let's test with first example: total sum = 1+2+3+3+7=16. Check reverse: Start S=16. Which cards divide 16? Ranks: 1,2,? 4? Not present. 8? no. 16? no. So 1 and 2 are candidates. If we remove 2 first: remaining sum=14, cards: 1,3,3,7. Next S=14: divisors among ranks: 1,2? 2 not present, 7 divides 14, also 14? no. So we could remove 7. Then S=7: divisors: 1? 1 divides 7, also 7? but 7 removed? Actually remaining: 1,3,3. S=7: divisors present: 1 (since 1 divides 7). So remove 1 => S=6, remaining: 3,3. S=6: divisors: 3? 3 divides 6, yes. Remove 3 => S=3, remaining: 3. S=3: divisor: 3 divides 3. Remove last. So reverse order: 2,7,1,3,3 => forward: reverse of that = 3,3,1,7,2 matches output. So greedy removal of 2 (largest? 2 vs 1, choose 2) then 7 etc works.
But is greedy always work? Not sure. We can try to test on unsolvable example: total sum=11. S=11, divisors among ranks: 1? no, 11? no. Actually 11's divisors <=13: 1 and 11. We have no 1. So no card divides 11, so it's impossible to remove any card initially. That means no reverse sequence, hence no forward sequence. Indeed unsolvable.
But there might be cases where there is a solution but greedy fails? Consider a set: {2,4,6}? But max rank 13. Let's test: 2,4,6. Sum=12. Reverse: S=12, divisors among ranks: 2,4,6? 2 divides 12, 4 divides 12, 6 divides 12. Choose largest 6: remove 6 -> S=6, remaining {2,4}. S=6, divisors: 2? 2 divides 6, 4 does not divide 6 (4 does not divide 6). So we can remove 2 -> S=4, remaining {4}. S=4, divisor: 4 divides 4. So reverse order 6,2,4 => forward 4,2,6? Let's check forward: start 4 (sum=4), next 2: 2 divides 4? yes, sum=6, next 6: 6 divides 6? yes. So valid. Greedy (largest) works.
What about {3,5,8}? sum=16. S=16, divisors: 1? not present, 2? not, 4? not, 8? 8 divides 16, also 16? not. So only 8. So must remove 8 first -> S=8, remaining {3,5}. S=8 divisors: 1,2,4,8. None present. So dead end. So no solution. Indeed no forward solution? Let's test forward: start 3 sum=3, next must divide 3: only 3? but we used it, 5 doesn't divide 3, 8 doesn't. start 5 sum=5, next must divide 5: only 5? but 3 and 8 not divisors. start 8 sum=8, next must divide 8: 3? no,5? no. So none.
What about {4,4,7,15}? 15 not allowed max 13. So keep within 1..13.
Maybe there is a scenario where at some point we have multiple choices and picking the wrong one leads to dead end; but some sequence works. So we need to search.
Given N up to 52, but only 13 ranks, we can treat each rank as a type with count. The state space might be manageable if we memoize failure states. Let's evaluate worst-case number of states visited. Each state is a combination of counts (0..original). The product of (original_i+1) could be large if many ranks have high counts. In worst-case, if we have all 13 ranks with count 4, product = 5^13 = 1.2e9. That's too many to explore. But maybe many of those states are not reachable due to the divisibility constraint. Could we still have a huge reachable set? Possibly not, but we need to be sure.
Consider the divisibility condition: To remove a card of rank r, we need r | S, where S is total sum of remaining cards. So not every subset is reachable; only those where the total sum has certain properties. Could it be that the number of reachable states is bounded by something like O(total_sum * something)? total_sum <= 364. For each possible sum value, there are many possible multisets that sum to that sum. But maybe we can use DP over sum and counts? Not exactly.
Another angle: Since ranks are <=13, total_sum is <=364, we could do DP over sum and maybe a bitmask of which ranks are present? But we need counts, not just presence. However the number of cards per rank is at most 4, so we can represent each rank's count in 3 bits. DP over sum and counts: state = (counts, sum) but sum is determined by counts if we know the total sum? Actually if we fix the set of cards remaining, sum is determined. So if we store sum, we can infer it from counts if we know initial sum, but that doesn't help.
We could use BFS/DFS with memoization and maybe use heuristics to reduce search: prioritize removal of larger ranks? Because larger ranks are more restrictive later. Often in such puzzles, a greedy strategy of always taking the largest possible divisor works. But we need to confirm.
Let's attempt to find a counterexample where greedy (always remove the largest rank that divides current total sum) fails. Try to construct a case where at some step, picking a large rank leads to dead end, but picking a smaller one allows continuation. Because larger ranks are more restrictive: they require the sum to be multiple of them. At later steps, sum decreases. If we remove a large divisor early, sum may become smaller and possibly lose divisibility by other cards. Conversely, removing a small divisor early keeps the sum larger, perhaps allowing removal of large cards later.
Consider total sum S. If we have a large rank L that divides S, we could remove L now. After removal, sum becomes S-L. For another large rank M that also divides S, after removal of L, does M still divide S-L? Not necessarily. So maybe we need to order removal carefully.
We need to find a multiset where multiple removal orders exist, but greedy (largest first) fails. Let's attempt to find a small example with ranks up to 13, counts up to 4. Let's manually search.
Let's think of two large numbers, say 6 and 8. Suppose we have cards: 6,8,? plus some others. Start S = sum. We need to be able to remove both eventually.
Case: cards: 6,8,2,? Actually we need to eventually remove all. Suppose total sum S = 24 (for example). Which cards? If we have 6,8,2,? But need to sum to 24. Let's try: 6,8,2,4,4? That sum = 6+8+2+4+4=24. Ranks: 2,4,4,6,8. N=5. Check reverse: S=24. Divisors present: which ranks divide 24? 2,4,6,8 all divide 24. Largest is 8. Remove 8: S=16. Now remaining: 2,4,4,6. S=16. Divisors present: 2,4? 6 does not divide 16. So can remove 2 or 4. If we remove 4 (largest among {2,4})? Remove 4: S=12, remaining: 2,4,6. S=12: divisors: 2,4,6 all divide 12? 4 divides 12? 12/4=3, yes. So we could remove 6? 6 divides 12 yes. But after removing 4, we have 2,4,6. S=12. Could we remove 6? 6 divides 12. If we remove 6: S=6, remaining: 2,4. S=6: divisors: 2 divides 6, 4 does not. So remove 2: S=4, remaining: 4. S=4: 4 divides 4. So removal order: 8,4,6,2,4? Actually we removed 8, then 4, then 6, then 2, then 4? But we have two 4's. Actually we have two 4's. After removal of first 4 (call it one 4), remaining: 2,4,6. Then we removed 6, then we removed 2, then last 4. Check: after 6 removal, S=6, remaining 2,4; then remove 2: S=4, remaining 4; then remove last 4. So order: 8,4,6,2,4. Reverse forward: 4,2,6,4,8. Check forward: start 4, sum=4, next 2: 2 divides 4? yes sum=6, next 6: 6 divides 6? yes sum=12, next 4: 4 divides 12? yes sum=16, next 8: 8 divides 16? yes. So valid. Greedy picking largest at each step worked.
Now try to find where picking largest fails: maybe when there is a 1. 1 always divides any sum, so 1 can be removed anytime. So if we have a 1, greedy could remove other large numbers first, but that might be okay.
We need a case where at step S, there are multiple divisors. If we pick a large divisor, we get to S' = S - large, and then later we need to remove another large divisor that no longer divides S' because S' is not a multiple of that divisor. But if we had instead removed a smaller divisor first, we would have S'' = S - small, which might still be a multiple of the large divisor, allowing its removal later.
For instance, suppose S is a multiple of both L and M (two large ranks). If we remove L first, S-L might not be a multiple of M. But if we remove M first, S-M might not be a multiple of L. So we might need to remove some intermediate cards to adjust the sum to be a multiple of the other. However there might be an order that works, but greedy (largest) might pick one that leads to dead end.
Let's try to construct with ranks: 4 and 6. Suppose S is a multiple of both 4 and 6, i.e., multiple of lcm(4,6)=12. Consider S=12. If we have cards: 4,6,? and maybe others. For S=12, we need sum of all cards =12. So perhaps cards: 4,6,2? That sums to 12. But 2 also present. Check reverse: S=12. Divisors: 2,4,6? 2,4,6 all divide 12. Largest is 6. Remove 6: S=6, remaining 4,2. S=6: divisors: 2? 2 divides 6; 4 does not divide 6. So we can remove 2: S=4, remaining 4. S=4: 4 divides 4. So works. So greedy works.
If we had 4,6,? maybe 4,6,1,1? sum=12. S=12. Largest divisor present: 6. Remove 6: S=6, remaining 4,1,1. S=6: divisors: 1? 1 divides 6; also maybe 2? not present, 3? no. So we can remove 1, then S=5, remaining 4,1. S=5: divisors: 1? 1 divides 5; 5? not present. So remove 1: S=4, remaining 4. S=4: 4 divides 4. So works. Greedy works.
What about S=24, cards: 6,8,9? but max 13 so 9 allowed. 6,8,9,1? sum=24. S=24, divisors: 1,6,8? 9? 9 does not divide 24. Largest among divisors: 8. Remove 8: S=16, remaining 6,9,1. S=16: divisors: 1? yes, 2? no, 4? no, 8? no, 16? no. So only 1. Remove 1: S=15, remaining 6,9. S=15: divisors: 1? not present, 3? not present? 5? no. 6 does not divide 15, 9 does not. Dead end. But if we instead removed 6 first? S=24, remove 6: S=18, remaining 8,9,1. S=18: divisors: 1? yes, 2? no, 3? 9? 9 divides 18? 18/9=2, yes 9 divides 18; 6? not present; 9 present. So we could remove 9: S=9, remaining 8,1. S=9: divisors: 1? yes, 3? no, 9? no. So remove 1: S=8, remaining 8. S=8: 8 divides 8. So order: 6,9,1,8 works. Also could remove 1 first then 9 etc. So greedy (largest) chose 8 and failed. But is there any alternative? After removing 8 and 1, we got stuck. Could there be another path after removing 8? After S=16, we had only 1 as divisor. After removing 1, S=15, stuck. So indeed picking 8 first leads to dead end, but picking 6 first works. So we have a counterexample: cards: 6,8,9,1. But 9 is allowed (<=13). Let's verify forward sequence exists: we found reverse order 6,9,1,8 => forward: 8,1,9,6. Check forward: start 8 sum=8; next 1: 1 divides 8 => sum=9; next 9: 9 divides 9 => sum=18; next 6: 6 divides 18 => sum=24. Works. So there is a solution.
Now does greedy (largest divisor first) fail? At S=24, divisors present: ranks that divide 24 among {1,6,8,9} are 1,6,8 (9 does not divide 24). Largest is 8. Greedy picks 8, then as we saw leads to dead end. So greedy fails.
Thus we need a search algorithm.
Given that N is at most 52, but number of distinct ranks only 13, we can implement a DFS that tries to remove cards in reverse order, using memoization to avoid revisiting states. The number of reachable states might be much less than product, but in worst-case like the example with many cards, could it blow up? However we can prune by noting that the order of removal of identical cards (same rank) does not matter; but they are distinct copies? Actually they are identical in rank but we need to output a specific sequence. Since cards of same rank are indistinguishable, we can treat them as identical; the ordering among identical ranks is irrelevant. In DFS, we can simply track counts, and when we output, we can produce any order; we can assign specific positions later. So we only need to find a sequence of ranks (with multiplicities) that works. So the state is counts per rank.
Now, the number of states might still be large but we can try to incorporate heuristics: try larger ranks first (or maybe smaller) to find a solution quickly. Also we can use DP with memoization: for each state (counts), we can compute if it's solvable (i.e., there exists an ordering to remove all cards) and also store the next move (which rank to remove) that leads to success. This is essentially solving a decision/construction problem via recursion with memo.
State space size: at most product over ranks (original_i+1). In worst case with many ranks full 4, that's 5^13 ~ 1.2e9, too many. But maybe the number of states visited in practice is manageable given the divisibility constraints. However we need to be robust for worst-case inputs. Possibly test cases are designed to be solvable or quickly pruned. Could we prove an upper bound on reachable states? Not straightforward.
Alternative: Since total sum is at most 364, we could store DP based on the multiset's total sum and maybe a representation of which ranks have which counts. But the sum alone is not enough to distinguish.
Maybe we can use meet-in-the-middle? Not likely.
Another thought: The condition r divides S (in reverse) suggests that the set of remaining cards must have total sum S that is a multiple of the rank we remove. That implies that at each step, S must be a multiple of the removed rank. So the sequence of removed ranks (in reverse) must satisfy that each removed rank divides the sum of all cards at that moment. This is reminiscent of building a sequence where the sum is reduced, and the removed numbers are divisors of the current sum. This is similar to the concept of "divisor game" where you have a set and you remove a divisor of the current total. We could think in terms of factors.
Observe that if we consider the multiset of cards, the total sum S_total must be divisible by the first removed rank r1. After removing r1, the new sum S1 = S_total - r1 must be divisible by the next removed rank r2, etc. So we need to order the cards such that if we list them in reverse order r1, r2, ..., rN, we have:
- r1 divides S_total
- r2 divides S_total - r1
- r3 divides S_total - r1 - r2
- ...
- rN divides S_total - sum_{i=1}^{N-1} r_i = r_N (since last card's condition is that it divides itself? Actually when only one card left, S = r_N, and condition: r_N divides S? That's always true because r_N divides r_N. So last step always works.)
This is a kind of "divisible sequence" property. This is similar to constructing a sequence where each element divides the partial sum of the suffix.
One can think of it as we need to partition the multiset into an order such that each prefix sum (in forward direction) is a multiple of the next element. Equivalent to: For forward direction: c1 arbitrary; for i>=2, c_i | (sum_{j=1}^{i-1} c_j). This is reminiscent of sequences where each term divides the sum of previous terms.
Maybe we can transform the problem into something about factoring: Since each term divides the previous total, the total sum after each step is a multiple of the next term. This implies that the total sum at each step is a common multiple of the terms seen so far? Actually not exactly.
Let S_k = sum_{i=1}^k c_i. Condition: c_{k+1} divides S_k. So S_k is a multiple of c_{k+1}. Then S_{k+1} = S_k + c_{k+1} = S_k (1 + c_{k+1}/S_k?) Not helpful.
Alternatively, in reverse, if we think of building the set by adding cards in reverse order: start from empty, add cards in reverse order such that each added card divides the new total sum after addition? Actually if reverse order is r1 (first removed), r2, ..., rN (last removed), then when we add rN first (which is actually the first card in forward), no constraint. Then adding r_{N-1} (which is second in forward) we need r_{N-1} divides current total? Wait in forward we add c_i to the existing sum; in reverse we remove from full set. But perhaps it's easier to think forward.
Given the counterexample to greedy, we need to search.
But maybe we can do a DP that is exponential in number of distinct ranks (13) rather than total cards. Because the counts matter but maybe we can treat the problem as: we need to assign an order to the cards, but the condition only cares about sums of subsets. Since the number of distinct ranks is only 13, we can perhaps use DP over subsets of ranks? But we have multiple copies. However we could treat each card individually, but N up to 52, so that's too many.
Another idea: Since ranks are small (1..13), we could use BFS on sum and counts but using meet-in-the-middle: we could split the set into two halves and try to combine? Not sure.
Given typical programming contest constraints, a DFS with memoization on the count vector might be acceptable if we use a good heuristic and pruning, especially because N <= 52 and ranks limited. Let's try to estimate number of states for worst-case configuration. For each rank, count can be 0..4. But the product is huge but many of those states are unreachable due to the sum divisibility constraints? Possibly not that many because the condition ties the sum to the counts. Each state corresponds to a particular combination of counts, and its sum is determined (since we know initial total sum, we can compute sum_rem = sum of counts * rank). At each step, we can only move to a state where we remove a rank r that divides the current total sum (which is S_total - sum_rem). So not every combination of counts is reachable from the start. How many reachable states could there be? It might be exponential in N but not as bad as 5^13.
Consider the worst-case where all ranks are 1? But max rank 13. If all cards are 1, then any order works because 1 divides any sum. The state space would include all subsets? Actually if all cards are 1, then counts: only rank 1 has count N (but N max 52, but count per rank limited to 4, so we can't have all 1's beyond 4 copies. The limitation 4 per rank prevents having many identical cards. So at most 4 copies of each rank, so the maximum number of cards is 52, and the counts per rank are small. So product over ranks (original_i+1) could still be large: if we have 4 copies for each of 13 ranks, product = 5^13 = 1.2e9. However, is it possible to reach all those states? Starting from full set, we remove cards. Each removal reduces one count. So reachable states are those with counts less than or equal to the initial counts. That's exactly all combinations where each count_i between 0 and initial_i. So if initial_i=4 for all 13 ranks, then reachable states are all combinations of counts with each 0..4. That's 5^13 states indeed. So theoretically, if the divisibility condition does not restrict the moves, it might be possible to explore many states. But does the divisibility condition allow arbitrary removal sequences? If any card can be removed at any time, then all subsets are reachable. When is that the case? If for every possible remaining set, there exists some card that divides the total sum? Not needed; but to reach all subsets, we need that for every subset there is some order of removals that leads to that subset. But the condition for removal is that the removed card must divide the current total sum. So if we can remove cards in any order, then all subsets might be reachable. For example, if we have many 1's, since 1 always divides any sum, we can remove any card as long as we have a 1? Not exactly. To reach a particular subset, we need a sequence of removals that ends with that subset. This could be highly constrained.
But in the extreme case where all cards are 1, the condition always holds because 1 divides any sum. So we can remove any card in any order; all subsets of 1's are reachable? But cards are identical; we only care about count of ones. Starting with k ones, we can remove ones arbitrarily; any count from 0 to k is reachable. That's only k+1 states, not 2^k because cards are indistinguishable. So even though there are many possible subsets of individual cards, they collapse to just count states because identical cards are indistinguishable. So the state space is based on counts per rank, not on specific cards. So if we have 4 ones, the count of ones can be 0..4; that's 5 states. So for each rank we have (initial_i+1) possibilities. So the total number of count vectors reachable is indeed product_i (initial_i+1). In the all-4 case, that's 5^13 = 1.2e9. But is it possible to actually visit all these states? Possibly not because of divisibility constraints; but could a problem instance be constructed such that the divisibility condition does not restrict moves at all? If every rank always divides the current sum regardless of the set, then any removal order is allowed, and thus every count combination is reachable (since we can remove cards in any order to achieve any intermediate multiset). But is it possible that for any subset of the full set, the total sum of that subset is such that there exists at least one card in the remaining set that divides the total sum? Wait we don't need to reach every subset; but we need to check if the full state graph might allow transitions to many states. For the all-4 case (ranks 1..13 each 4), consider if it's possible to remove any card at any time? That would require that for any current multiset (with total sum S), every rank present divides S? Not necessary; we only need at least one removable card to continue, but to reach all subsets we would need the ability to remove specific cards at specific times. But maybe the state graph is still highly connected such that many count vectors are reachable. For instance, if we have many 1's, we can always remove a 1 regardless of sum, so we can reduce the count of ones arbitrarily. For other ranks, to reduce their count, we need to wait until the sum is a multiple of that rank. With many 1's, we can adjust the sum? Possibly we can achieve any intermediate combination? Not sure.
Let's consider the all-4 case: ranks 1..13 each count 4, total sum = 4*91=364. Starting from full set, can we remove any card? We need a card whose rank divides 364. Divisors of 364: 1,2,4,7,13,14,26,28,52,91,182,364? Actually 364/13=28, etc. So ranks that divide 364 among 1..13: 1,2,4,7,13 (maybe also 14>13 not). So at start, we can only remove ranks 1,2,4,7,13 (if present). So we cannot remove, say, a 3,5,6,8,9,10,11,12 initially. So the initial moves are restricted. As we remove cards, the sum changes, and eventually other ranks may become available. But to reduce the count of a rank like 3, we need to wait until the current sum is a multiple of 3. That might be achievable after some removals. Could we eventually reach any combination of counts? Possibly many but not all. Still, the state space could be large but maybe manageable with memoization and search.
However, 5^13 is 1.2e9, which is too many to store. But perhaps the actual visited states in DFS with pruning (like trying larger ranks first) will be far fewer. In worst-case, if the instance is solvable, we may find a solution quickly without exploring many states. If it's unsolvable, we might need to explore many states to prove no solution. Could an unsolvable instance require exploring a large portion of the state space? Possibly yes, but maybe there are necessary conditions that quickly rule out unsolvability.
We need a more efficient algorithm.
Alternative: This problem might be reduced to a known NP-complete problem? Perhaps it's equivalent to the subset sum or partition with divisibility constraints. But N is small enough for DP over sum? Maybe we can use recursion with memoization based on bitmask of "which cards are used"? But 52 bits is too many.
But note each rank appears at most 4 times, so we could treat each card individually, and use DP with bitmask if we compress groups? 52 bits is still too many for bitmask DP (2^52). But we could use meet-in-the-middle: split into two halves of ~26 cards each, which is still huge.
Another angle: The forward condition: c_i divides sum_{j=1}^{i-1} c_j. This is similar to building a sequence where each term is a divisor of the partial sum. This is reminiscent of the concept of "divisible sequence" which can be constructed greedily by always choosing the largest possible? But we found a counterexample where greedy fails. However maybe there is a polynomial-time algorithm using number theory? For example, we could sort cards by something.
Let's analyze the divisibility constraints more deeply.
Let total sum = T. In reverse, we need an ordering (r1,...,rN) such that for each k, r_k divides S_k where S_1 = T, S_{k+1} = S_k - r_k. Equivalent to r_k | S_k.
Thus, we have T ≡ 0 mod r1, T - r1 ≡ 0 mod r2, etc.
We can think of it as: we need to partition the multiset into a sequence where each element is a divisor of the sum of the remaining elements (including itself). This is similar to the concept of "graceful" or something.
Observation: Since r_k divides S_k, we have S_k = m_k * r_k. Then S_{k+1} = S_k - r_k = (m_k - 1) * r_k. For the next step, we need r_{k+1} | S_{k+1}. So r_{k+1} divides (m_k - 1) * r_k. This suggests a relationship between consecutive elements.
If we consider the sequence in reverse, maybe we can sort by something like increasing order of rank? Let's test: In the counterexample {1,6,8,9}, the successful reverse order was 6,9,1,8. Sorted increasing: 1,6,8,9, but that's not the reverse order. Actually reverse order successful: 6,9,1,8 -> not sorted. Increasing: 1,6,8,9; decreasing: 9,8,6,1; none worked? Let's check reverse order decreasing: 9,8,6,1? Start S=24: 9 divides 24? no. So not.
Maybe we can use a priority based on something like: always remove a card with rank equal to the smallest prime factor of S? Not sure.
Another idea: Since N is small, we could use recursion with memoization but also use a heuristic like trying cards in order of descending rank (largest first) because that seems to often work, and if that fails, we backtrack. With memoization, we might avoid exploring many states. But still worst-case could be exponential.
Given constraints (max 52 cards, each rank ≤13, max 4 per rank), the total number of distinct count vectors is at most 5^13 = 1.2e9, but that's an upper bound. However, many of these states are not reachable due to the sum constraints. But in the worst case where many states are reachable, could we still handle? Let's try to approximate reachable states for the all-4 case. The number of reachable states might be huge because we can remove cards in many orders? But each state is defined by counts. The total number of states is product_i (initial_i+1). In all-4, that's 5^13. Could all these states be reachable? To be reachable, there must exist a sequence of removals from full set to that state. That means we can remove a subset of cards (some multiset) in some order. Since we can remove cards in any order as long as each removed card divides the current sum at the time of removal. If we can remove any subset in some order, then all states (i.e., all subsets) are reachable. So the question: For the all-4 set (ranks 1..13 each 4), is it possible to remove any arbitrary subset of cards (i.e., achieve any intermediate multiset) through some order that respects divisibility? If yes, then the state space is huge. But is it possible? Let's test a simple case: can we remove a single 3 from the full set? To remove a 3, we need at some point the current sum to be divisible by 3. Initially sum=364, 364 mod 3 = 1 (since 3*121=363), so not divisible. So we cannot remove a 3 first. We need to first remove some other cards to make the sum a multiple of 3. Can we do that? Possibly yes, by removing cards that change the sum mod 3 appropriately. For example, remove a 1 (since 1 divides 364) changes sum to 363, which is divisible by 3. So after removing a 1, sum=363, now we can remove a 3. So we can achieve a state where we have removed a 1 and then a 3, leaving counts: 3's count 3, 1's count 3, others unchanged. So we can reach a state where 3's count is reduced by 1. But can we reach a state where only a 3 is removed (i.e., remove just a 3 without removing a 1)? That would require removing a 3 when sum is divisible by 3, but we cannot remove a 3 as the first card because sum not divisible by 3. Could we remove some other cards first that bring the sum to a multiple of 3 and then remove the 3, but then later we would have removed other cards as well, so the state where only a 3 is removed (others full) is not reachable because to make sum divisible by 3 we might have to remove some other cards first. However, after removing a 1 and then a 3, we could possibly add back the 1? No, removal only; we cannot add. So the state with only 3 removed is not reachable directly. But can we later remove the 1? After removing 3, sum=360? Actually after removing 1, sum=363; then remove 3, sum=360. At that point we could remove other cards. But we cannot "undo" the removal of 1. So the state with only 3 removed (and all other cards present) is not reachable because to be able to remove a 3 we needed to have removed a 1 first (or some other combination) to adjust the modulus. So not all subsets are reachable. The reachable states are those that can be obtained by a sequence of legal removals. This likely drastically reduces the number of states.
Thus, the state space might be manageable. For all-4 case, maybe the number of reachable states is far less than 5^13. How many could it be? Possibly on the order of something like (total sum) * something? Since each state is defined by counts, but the divisibility condition ties the sum to the counts. We could attempt to bound number of reachable states by the number of possible sums (0..364) times the number of ways to represent that sum with limited counts? That's still many, but perhaps we can store visited states in a hash set, and the DFS will only explore states that are actually encountered.
Given typical contest constraints, N ≤ 52, time limit maybe a few seconds, it's plausible that DFS with memoization and heuristic ordering will pass. Many similar problems (like "Divisor is the Conquerer") might have solutions using backtracking with pruning, maybe with a lemma that there always exists a solution except some trivial cases, but not.
Let's search memory: I recall a problem named "Divisor is the Conquerer" from some contest (maybe ICPC?). Could be from ACM-ICPC Asia Regional? The typical solution might involve backtracking with state compression using bitmask for each rank's count, and using memoization. Given that ranks only 13, and counts at most 4, it's feasible to represent state in a 64-bit integer (e.g., each rank uses 3 bits). Then use unordered_map to memoize success/failure. The number of states visited likely won't be huge because of the divisibility condition.
We should implement a recursive search in reverse order (removing cards). Starting from the initial counts and total sum S. The function solve(state) returns true if there exists a sequence to remove all cards, and also stores the next move (rank to remove) to reconstruct the sequence. We can also attempt forward search; but reverse seems natural because condition is simpler? Actually both are similar. In forward, we start from empty set, but need to choose first card arbitrarily; condition on subsequent cards. In reverse, we start from full set and remove cards with divisor condition. The number of steps is same.
Recursion base: if no cards left (sum=0), return true.
Otherwise, we need to try each rank r that has count>0 and such that r divides current sum S (since we are in reverse). For each such rank, we remove one copy of r (decrease count[r] by 1, new sum = S - r), and recursively check if the resulting state is solvable.
We can memoize results for each state (the counts vector). If any child returns true, we record that removal choice and return true. If none, return false.
If we find a solution, we can record the removal order (stack) and then output the forward order (reverse of removal order).
We must output any winning strategy. So DFS returning first found solution is fine.
Now optimization: Order of trying ranks matters. Since we want to find a solution quickly, we should try choices that are more promising first. For example, try larger ranks first? In the counterexample, greedy largest failed, but DFS with backtracking will eventually try other options. However if we try larger ranks first, we might quickly find a solution if it exists, but could also go deep into dead ends. Might still be okay.
We could also use heuristic: try ranks that have fewer copies? Or try ranks that are divisors of S but maybe also consider that after removal, the new sum S' = S - r should be such that there remains at least one card that divides S' (unless it's the last). We can prune: if after removal, there exists at least one rank with count>0 that divides S', else if there are cards left but none divides S', then that state is dead