Skip to content
TheChatArchiveThe Chat Archive
DeepSeekDeepseek v3.2· deepseekHugging Face Frontier Reasoning Traces

Allen is hosting a formal dinner party. 2n people come to the event in n pairs…

  1. User

    Allen is hosting a formal dinner party. 2n people come to the event in n pairs (couples). After a night of fun, Allen wants to line everyone up for a final picture. The 2n people line up, but Allen doesn't like the ordering. Allen prefers if each pair occupies adjacent positions in the line, as this makes the picture more aesthetic.

    Help Allen find the minimum number of swaps of adjacent positions he must perform to make it so that each couple occupies adjacent positions in the line. Input

    The first line contains a single integer n (1 ≤ n ≤ 100), the number of pairs of people.

    The second line contains 2n integers a_1, a_2, ..., a_{2n}. For each i with 1 ≤ i ≤ n, i appears exactly twice. If a_j = a_k = i, that means that the j-th and k-th people in the line form a couple.

    Output

    Output a single integer, representing the minimum number of adjacent swaps needed to line the people up so that each pair occupies adjacent positions.

    Examples

    Input

    4 1 1 2 3 3 2 4 4

    Output

    2

    Input

    3 1 1 2 2 3 3

    Output

    0

    Input

    3 3 1 2 3 1 2

    Output

    3

    Note

    In the first sample case, we can transform 1 1 2 3 3 2 4 4 → 1 1 2 3 2 3 4 4 → 1 1 2 2 3 3 4 4 in two steps. Note that the sequence 1 1 2 3 3 2 4 4 → 1 1 3 2 3 2 4 4 → 1 1 3 3 2 2 4 4 also works in the same number of steps.

    The second sample case already satisfies the constraints; therefore we need 0 swaps.

  2. DeepSeek Assistant

    We need to compute minimal adjacent swaps to make each pair of numbers adjacent. The input has 2n positions, each number from 1..n appears exactly twice. We can swap adjacent positions. The goal: each pair of identical numbers should be next to each other (i.e., for each i, the two occurrences of i are adjacent). The order among couples does not matter, and within a couple the order (which one is first) does not matter? Actually "each pair occupies adjacent positions" means they are next to each other. They can be either (i,i) in that order, or (i,i) either way, it's symmetric. So we need to bring the two identical numbers together.

    This is reminiscent of a problem: given an array of numbers, each appearing twice, you want to make pairs adjacent via adjacent swaps, minimize swaps. This is like bubble-sorting to a target arrangement where each pair is together, but the target order among couples can be any permutation. We can decide the final order of the couples to minimize swaps. So we need to find an ordering of the n pairs (i.e., which couple appears where in the final line, but the two identical numbers are adjacent) that is reachable via adjacent swaps from the initial arrangement, minimizing the number of adjacent swaps needed.

    Alternatively, we can think of this as: we have 2n elements, we need to pair up each number with its duplicate. The cost of adjacent swaps to bring two elements together is the distance between them minus 1 (if we move one towards the other without affecting others? but moving elements can change positions of others). Actually, if we simply bring each pair together sequentially, the swaps might double count because moves overlap. So we need a systematic way.

    Observation: The minimal number of adjacent swaps to transform one permutation into another is equal to the number of inversions between the two permutations if we consider a linear order of items (if items are distinct). But here items are not distinct because duplicates exist. However, we can assign identities to each occurrence (e.g., first occurrence vs second occurrence, but they are identical). For the purpose of swapping, if we consider each person distinct (even if same number, they are different individuals), we could label them as person 1a and person 1b for couple 1, etc. The input gives only numbers, but the two occurrences of the same number are indistinguishable. However, in the final arrangement, we need them adjacent but we don't care which one is left or right. So we can treat them as two distinct items that need to be together, but swapping identical items doesn't change the array if they are identical? Wait, but in reality, the people are distinct even if they have same label. The label '1' might represent the couple ID, but the two persons are distinct. In the input, we only know IDs for couples. So we have two individuals per couple, but they are not distinguished by the given data. However, for the purpose of counting adjacent swaps, we can arbitrarily assign an ordering within the couple because swapping two identical numbers would not be visible? Actually, if they are identical, swapping them does not change the array, but in real life the people are distinct so swapping them might be considered a different arrangement but the array of couple IDs would be unchanged. Since the goal only cares about couple IDs being adjacent, the exact order of the two individuals within the couple does not matter. So we can treat the two identical numbers as interchangeable. Therefore, any arrangement where for each couple the two numbers are adjacent (regardless of order) is acceptable.

    Thus we need to find the minimal adjacent swaps to reach any arrangement satisfying that condition.

    This problem appears in competitive programming: "Minimize adjacent swaps to make pairs together" (maybe Codeforces problem). The solution: sort the array by pairing numbers greedily? Or maybe use DP with bitmask: since n <= 100, 2n <= 200, but 2^100 is impossible. However, there is known solution: The minimal swaps is the number of inversions after we compress each pair to a single element? Or we can think of it as: we process from left to right, and for each number, if its partner is not next, we bring it next by swapping adjacent. That yields a greedy algorithm: maintain a list of positions, and for i from 1 to 2n step 2, we look at the first element, find its partner, bring it next to it, then remove both. The number of swaps needed equals the distance between them minus 1. Then we repeat. This greedy approach gives optimal? Let's test: For the first example, starting: [1,1,2,3,3,2,4,4]. Process leftmost: index1=1 (value 1). Its partner at index2=2, distance=1 => swaps 0. Remove them (positions 1 and 2 become gone). Remaining list: [2,3,3,2,4,4] but indices shift? Actually after removal, the array becomes [2,3,3,2,4,4] (positions renumbered). Next leftmost: index1=1 now, value=2. Its partner is at index? The array: 2 at pos1, then 3,3,2,4,4. The partner of 2 is at pos4 (value 2). Distance = 3 (positions 1 to 4, diff 3) => swaps needed = 2 (since distance-1=2). Bring partner adjacent by swapping leftwards: we would swap element at pos4 leftwards until it reaches pos2, but since we remove both after, we just count. So total swaps=2. That matches answer 2.

    Second example: [1,1,2,2,3,3] -> leftmost 1 partner at pos2 distance1 ->0; then [2,2,3,3] leftmost 2 partner at pos2 distance1->0; then [3,3] 0. total 0.

    Third example: n=3, array: [3,1,2,3,1,2] (positions:1:3,2:1,3:2,4:3,5:1,6:2). Greedy: leftmost index1=3. Find partner at index4 (value 3). Distance = 3 (index4 - index1 =3). swaps +=2 (distance-1=2). Remove both: After removal, the array becomes? We remove positions of both 3's: original positions 1 and 4. The remaining elements: [1,2,1,2] but order: pos2:1, pos3:2, pos5:1, pos6:2. So list = [1,2,1,2] (positions renumbered 1..4). Now leftmost = 1 at new pos1. Its partner? Next occurrence of 1 at new pos3. Distance = 2 -> swaps +=1 (distance-1=1). Remove them: remaining list: from [1,2,1,2] after removing the first 1 (pos1) and second 1 (pos3) -> remaining [2,2] (positions originally pos2? Actually after removal, the array is [2,2] (since we removed 1's, left with the two 2's). That gives leftmost 2 partner at pos2 distance1 -> 0 swaps. Total swaps=3. Matches answer 3.

    So greedy works for these examples. Is it always optimal? This resembles the problem "minimum adjacent swaps to make string balanced" or "minimum swaps to group all ones together" but with pairs. There is known result: if we process from left to right and always pair the leftmost element with its partner by moving the partner to its right (or left) and then remove both, the total number of swaps equals the minimum. This is similar to computing the number of crossings in a matching on a line: each swap corresponds to an inversion between pairs.

    We can think of the array as a sequence, and we want to pair the two occurrences of each number. The minimal number of adjacent swaps to achieve a configuration where all pairs are adjacent is equal to the number of intersecting pairs in the initial arrangement? Actually, if we consider the positions of each pair, the minimum swaps needed to bring them together without considering other pairs is the distance between them minus 1. But when we bring them together, we may affect other pairs. However, the greedy algorithm of repeatedly removing the leftmost element and its partner gives a total cost equal to the number of inversions in a certain order. This algorithm is similar to: we assign each couple an ordering based on the first occurrence of that couple. That is, if we scan left to right, and when we encounter a number for the first time, we record it; then we can form a sequence of couples by the order of first appearances. The final arrangement would be: for each couple in that order, place its two numbers consecutively. And the minimal swaps to achieve that arrangement is the sum over each pair of the distance between the two occurrences minus (something) but with overlaps? Actually, the greedy algorithm described essentially simulates that: we bring the partner of the first element to its right, thus making that pair adjacent at the front; then we effectively remove them and continue. The total swaps equals the sum of distances between each pair after removing previously processed pairs, which is the number of swaps needed to bring the partner leftwards to just after the first element.

    We need to confirm optimality. There is known problem from USACO or Codeforces: "Minimum number of adjacent swaps to make couples sit together" maybe similar to "Couples Holding Hands" from LeetCode, but that one is about swapping any two people (not necessarily adjacent) to make couples adjacent. However, that problem uses swaps of arbitrary positions, not adjacent. The minimal number of arbitrary swaps is something else. But for adjacent swaps, this greedy appears to be correct.

    Let's search memory: There is Codeforces Round problem "C. Tokyo" no. Actually I recall a problem: "B. Pairs" maybe? Or "Misha and Changing Handles"? Not sure. But there is known concept: Given an array with each element appearing twice, the minimal adjacent swaps to pair them is computed by scanning left to right and each time you encounter an element, if it's the first of its type, push it onto a stack; if it's the second, you count the number of unmatched elements between them, and that count is the number of swaps needed to bring them together (since those unmatched elements will need to cross over this second element to get to its partner). That matches the greedy: when we process leftmost, we look for its partner. The number of swaps to bring partner adjacent to leftmost equals the number of other unpaired elements between them. Because each swap moves the partner left by one position, swapping with each of those elements. Those elements are all unmatched (since we haven't paired them yet). In the process, after we bring them together, we can conceptually remove them. So the cost for that pair is exactly the number of elements between the two occurrences in the current (reduced) array. This is exactly what greedy computes: distance-1 = number of elements between them. But the greedy also removes the pair, so the subsequent costs are computed on the reduced array.

    Thus total minimal swaps = sum over pairs (when processed in order of first appearance) of the number of unpaired elements between them at that time.

    Now is there any other ordering that could yield lower total? Possibly, but this ordering seems natural: if we pair a couple that is not the leftmost, we might cause extra crossing. The problem reduces to: We have a sequence of 2n items, each appears twice. We want to pair them (match the two occurrences) and then arrange them as adjacent pairs (in any order). The cost of a pairing (i.e., a matching of positions) is something like the number of crossings? Actually, if we decide a final ordering of the n pairs (i.e., a permutation of couples), the minimal adjacent swaps to achieve that ordering from the initial arrangement is the number of inversions between the multiset of labels when we map each element to its couple and maybe orientation. But since elements are identical within couple, we could consider the sequence of couples after compressing each adjacent pair into a single token. The number of adjacent swaps needed to achieve a specific pairing arrangement (with fixed order of couples and within each couple the two are together) equals the number of inversions needed to sort the sequence of couples (considering each person belongs to a couple) into that order. However, we are free to choose the order of couples.

    Alternatively, think of it as we have 2n distinct individuals with couple ids. The target is any arrangement where each couple's two individuals are adjacent. This is like we want to partition the line into n blocks of size 2, each block containing a couple. The order of blocks can vary. The minimal adjacent swaps to achieve that is the minimal number of inversions between the current permutation of individuals and some target arrangement respecting block adjacency.

    But since individuals are not distinguished beyond couple id, many target arrangements correspond to the same sequence of couple ids (but with possible swapping of the two individuals inside the block, which doesn't affect the sequence of ids). So essentially, we want to choose an ordering of the couples (a permutation p of [1..n]) such that if we replace each individual with its couple id, and then we want to transform the given sequence into a sequence where the ids appear as p1,p1,p2,p2,...,pn,pn (i.e., each couple appears as a double). However, note that in the target, the two identical ids are adjacent but we don't care about order between couples? Actually, the target sequence of ids must be of that form: each couple appears consecutively twice. The order of couples can be any permutation. So we need to find a permutation of couples that minimizes the number of adjacent swaps required to transform the given sequence into that double sequence.

    But this seems like we need to compute, for each possible permutation of couples, the number of adjacent swaps needed to turn the given sequence into the sequence where each couple's two ids appear together in that order. And then take the minimum.

    Now, is there an efficient way to compute this minimum? n up to 100, so 2n up to 200. There are n! permutations, which is huge. So we need smarter.

    Observations: The greedy algorithm essentially yields a specific order: the order of first appearances of each couple. That is, scanning from left to right, when we see a couple id for the first time, we note it; that defines an order. The greedy then pairs them in that order (by bringing the second occurrence to follow the first). That yields a target arrangement where the couples appear in that order (the order of first appearances). So the greedy gives a candidate total swaps. The question: is it always optimal? Probably yes.

    We need to prove that the minimal number of adjacent swaps is exactly the sum over pairs of the number of other unpaired elements between them when processed in the order of the first occurrence of each number. This is reminiscent of the problem of sorting by swapping adjacent elements to make all pairs adjacent, and the optimal strategy is to process from left to right.

    Let's try to think: Suppose we have an optimal sequence of swaps that results in all pairs adjacent. Consider the leftmost position in the final arrangement. It contains some couple id, say i. In the final arrangement, the two i's are adjacent and form the first block (or maybe second block if there is something before? Actually the leftmost position is the first element of some block. So there is a block (i,i) starting at position 1. In the initial arrangement, the two i's are at some positions. The process of swapping adjacent elements can be thought as moving elements around. Could we show that it's always optimal to make the couple that appears first in the initial order to be the first block? Possibly.

    Consider the first element in the initial array, a_1. Its partner is somewhere. In any final arrangement, the two a_1's will be adjacent somewhere. If they are not the first block, then there is some other block (j,j) before them. That would require moving a_1's partner across that block or moving the block before them. Might cost extra swaps. It seems plausible that we can always rearrange so that the order of blocks is the order of first appearances, and that minimizes crossings.

    Let's try to formalize: Let the array be positions 1..2n. For each couple i, let its two positions be x_i < y_i (the left and right occurrence). The problem of making them adjacent via adjacent swaps is equivalent to the problem of eliminating the gaps between x_i and y_i by moving the right occurrence leftwards (or left rightwards). But note that we can also move the left occurrence rightwards; but since swaps are symmetric, the total number of swaps needed to bring them together is at least the number of other elements between them, but those elements themselves may move relative to each other.

    If we think of the process as we perform swaps, the total number of swaps equals the number of inversions between the initial sequence and the final sequence when considering distinct items. However, since items are not distinct, we need to map them to distinct tokens.

    We could assign distinct IDs to each individual: for each couple i, label the two individuals as i_a and i_b arbitrarily (e.g., order of appearance). Then the initial sequence is a permutation of these 2n distinct IDs. The target sequences are all permutations where i_a and i_b are adjacent (in either order) and for each couple, the two are together, but the blocks can be in any order. The minimal number of adjacent swaps to go from the initial permutation to some target permutation is the minimum over targets of the Kendall tau distance (inversions) between the initial permutation and the target permutation. That's a combinatorial optimization: choose an ordering of blocks and orientation of each couple to minimize inversion distance.

    But we can note that the inversion distance between two permutations can be computed as the number of pairs (p,q) such that they appear in opposite order. If we fix a target order of blocks (sequence of couples) and orientation (which of the two individuals appears left), then the inversion count is determined.

    We need to see if there is a known polynomial algorithm.

    Given n <= 100, maybe there is DP over subsets? 2^100 too large. But there might be DP based on interval or on ordering of couples. Another thought: The greedy algorithm yields answer = sum_{i} (y_i - x_i - (number of couples j with x_j between x_i and y_i? Actually when we process leftmost first, we remove pairs. If we define the order of pairing as the order of leftmost occurrences, then the cost for couple i is: after removing all couples with leftmost occurrence before x_i, the positions of its two occurrences in the reduced array: but the distance between them minus 1 equals the number of other unmatched elements between them. That number is exactly (y_i - x_i - 1) - 2*(number of couples j that are fully between x_i and y_i? Actually if we consider original positions, between x_i and y_i there may be some other elements. Some of those belong to couples that have both occurrences between x_i and y_i; those couples would be completely inside that interval. In the greedy, when we process couple i (with x_i being the current leftmost), all couples that have leftmost occurrence before x_i have been removed. Those that have leftmost occurrence after x_i but before y_i are still present and their two occurrences may be partially inside the interval. Actually, consider original positions. Suppose we have couples with leftmost occurrence after x_i but before y_i. Their left occurrence is between x_i and y_i, but their right occurrence could be either inside or outside. But if we haven't removed them yet, they are "unpaired". At the moment we process i, the array is the original array with some elements removed (those with leftmost occurrence before x_i). So the positions of the remaining elements are a subset of original indices but preserving order. For couple i, its left occurrence is now the leftmost in the array (since all earlier elements have been removed). Its right occurrence is still at its original index, but some elements before it might have been removed. The number of elements between them in the reduced array equals the original number of elements between x_i and y_i minus the number of those elements that have been removed (i.e., those belonging to couples already processed). Those removed are couples with leftmost occurrence before x_i, but those couples may have their second occurrence possibly after x_i? Wait, couples processed before i are those with leftmost occurrence < x_i. But their right occurrence could be > x_i, possibly even > y_i. However, after processing, both occurrences are removed. So if such a couple had its right occurrence between x_i and y_i, that element would be removed, thus reducing the gap. But can that happen? For a couple j with leftmost occurrence < x_i, its right occurrence could be either before x_i (if both < x_i) or after x_i. But if its right occurrence is after x_i, it could be between x_i and y_i or after y_i. If it's between x_i and y_i, then originally that element is in the interval, but after removal, it's gone, so the gap reduces. So the number of remaining elements between x_i and y_i is (y_i - x_i - 1) - (# of removed elements that lie between). Since removed elements are exactly the occurrences of couples with leftmost < x_i that are between x_i and y_i. But also note that couples with leftmost < x_i could have both occurrences before x_i, then none between. So indeed, the cost for couple i in greedy is: after removing earlier couples, the number of remaining elements between its two occurrences.

    Now, is there any alternative pairing order that could give a lower total sum of gaps? Suppose we pair a couple that is not the leftmost first. For example, if we pair a couple with both occurrences close together but far to the right, maybe it's better to pair it later? But the sum of gaps might be lower if we pair in a different order. However, note that each time we pair a couple, we essentially "remove" two elements. The total number of swaps used in any sequence of adjacent swaps that achieves the final configuration can be related to the number of crossings between the pairs. In fact, one can model the process as: we have a permutation, and we want to arrange so that each couple's two elements are adjacent. The minimal number of adjacent swaps equals the number of inversions between elements of different couples when considering a certain order. Another viewpoint: Consider the array, and construct a graph by connecting each pair with an arc (matching). The minimal adjacent swaps to make all pairs adjacent equals the number of intersections between arcs? Let's test: In the first example, positions: couple1 at 1-2 (adjacent, no crossing). couple2 at 3-6? Actually: array: 1 1 2 3 3 2 4 4. couples: 1:1,2; 2:3,6? Wait careful: indices: 1:1, 2:1, 3:2, 4:3, 5:3, 6:2, 7:4, 8:4. So couples: 1 (1,2), 2 (3,6), 3 (4,5), 4 (7,8). Intersections: arcs from 3 to 6 crosses arc from 4 to 5? Actually, arcs: (3,6) and (4,5) — 4 and 5 are both inside 3-6? Since 3<4<5<6, yes they intersect. Also (3,6) and (7,8) no. So there is one intersecting pair. The answer is 2, not 1. So maybe each intersection costs something like 2? But (3,6) crossing (4,5) would require two swaps? Let's see. In the solution we did, we paired couple2 (value2) after removing couple1, the gap had two elements (3 and 3) actually? Wait after removing couple1 (positions 1,2), the remaining array: indices original 3,4,5,6,7,8 -> values:2,3,3,2,4,4. The couple2 now has left at position1 (value2) and right at position4 (value2). Between them are positions2 (3) and3 (3) -> two elements. So cost=2. That matches the number of elements between the two occurrences after removal. In terms of intersections, the arcs (3,6) and (4,5) intersect, and the number of elements between left of couple2 and its partner after removing earlier arcs? Not directly.

    Another thought: The total minimal swaps might be equal to the number of inversions in the sequence of "first occurrence" order when we replace each element by its couple index and then compress? Not sure.

    Given the constraints n <= 100, the greedy algorithm is O(n^2) easily (since we can simulate by repeatedly scanning and removing). That would be trivial to implement. But we need to be absolutely sure it's optimal. Let's try to find a counterexample where a different order yields fewer swaps.

    Consider n=2. Cases:

    1. [1,2,1,2] (pairs: 1 at 1 and 3, 2 at 2 and 4). Greedy: leftmost 1 at pos1, partner at pos3, distance 2 => swaps=1 (since distance-1=1). Remove both, remaining [2,2] cost 0. Total=1. Can we do better? Final arrangement could be either (1,1,2,2) or (2,2,1,1). Starting from [1,2,1,2], to get (1,1,2,2): we need to move the second 1 left past the 2 at position2: swap positions2 and3 => [1,1,2,2] -> 1 swap. To get (2,2,1,1): we need to move the first 2 to the left? Actually starting [1,2,1,2], we could swap positions1 and2 -> [2,1,1,2], then swap positions2 and3 -> [2,1,1,2]? Not correct. Let's try: [1,2,1,2] -> swap positions3 and4 yields [1,2,2,1] -> now we have 2,2 adjacent? positions2-3 are 2,2? Actually after swap: [1,2,2,1] then need to get 1,1 adjacent: swap positions1 and2? [2,1,2,1] not good. Another: [1,2,1,2] -> swap positions2 and3: [1,1,2,2] done. So 1 swap. Could we achieve 0? No. So greedy gives optimal.

    2. [2,1,1,2] (pairs: 1 at 2,3; 2 at 1,4). Greedy: leftmost is 2 at pos1, partner at pos4, distance=3 => swaps=2. Remove both, remaining [1,1] cost 0. Total=2. Check if possible with fewer swaps? Target maybe (1,1,2,2): initial [2,1,1,2] -> we want to bring 2's together? They are at ends. To get (1,1,2,2): need to move 2's to end. Let's simulate: swap positions1 and2 -> [1,2,1,2]; then swap positions2 and3 -> [1,1,2,2] total 2 swaps. Could we do (2,2,1,1): [2,1,1,2] -> need to bring 2's together: they are at positions1 and4, need to move the 4 leftwards? Swap positions3 and4 -> [2,1,2,1]; swap positions2 and3 -> [2,2,1,1] total 2 swaps. So minimal is 2. Greedy matches.

    3. [1,2,2,1] (pairs: 1 at 1,4; 2 at 2,3). Greedy: leftmost 1 at pos1, partner at pos4, distance=3 => swaps=2. Remove both, remaining [2,2] cost0 total2. But maybe we can do better? Target (1,1,2,2): start [1,2,2,1] -> swap positions3 and4 -> [1,2,1,2]; then swap positions2 and3 -> [1,1,2,2] total2. Target (2,2,1,1): swap positions1 and2 -> [2,1,2,1]; swap positions2 and3 -> [2,2,1,1] total2. So 2. Greedy works.

    Now consider n=3, try to find a case where greedy not optimal.

    We can attempt to construct: The greedy order is determined by first appearances. Could there be a case where it's better to pair a couple that is not first in the order first? That would change the order of removal. For instance, if a couple's two occurrences are far apart, but there are many other couples whose both occurrences lie entirely within that gap, perhaps it's cheaper to pair those inner couples first, because then when we later pair the outer couple, the gap is smaller (since inner couples have been removed). The greedy does exactly that: it pairs couples in the order of their leftmost occurrence, which means if a couple's leftmost is early, we pair it early, even if its gap is large and contains many other couples. But does that ever lead to more swaps than if we paired some inner couple first? Let's analyze.

    Suppose we have two couples: A (positions 1 and 100) and B (positions 2 and 3). Greedy: leftmost is A at pos1, we pair A first: distance = 99 (gap includes B and many others). But we have only B inside? Actually B is at positions 2 and 3, both between 1 and 100. After pairing A, we need to move A's partner left across all elements between, including B's two elements. That would cost 99 swaps. Then we remove A, leaving B adjacent? Actually after removing A (positions 1 and 100), the remaining array will have B at positions 1 and 2? But originally B at 2 and 3, after removal of positions 1 and 100, the indices compress: B's left at new pos1, right at new pos2, distance 1, cost 0. Total = 99.

    Alternatively, if we pair B first: we would bring B's partner adjacent (distance 1, cost 0? Actually B's distance is 1, swapping? B at positions 2 and 3 already adjacent? In this example, they are adjacent, so cost 0). Then remove B, leaving A at positions 1 and 98 (since removed two elements). Then pair A: distance = 97, cost = 96? Wait new distance: leftmost at pos1, partner at original pos100 but after removing two elements (positions 2 and 3) the partner's index reduces by 2, so distance = (100-1-? Actually after removal of B, the array length is 98. A's left is at position1, A's right is at position? original index 100, after removing two earlier positions (2 and 3) the index reduces by 2 => new position = 98. So distance = 97, swaps = 96. Total = 96, which is less than 99. So greedy (pair A first) gave 99, while pairing B first gives 96, which is better. But wait, is B already adjacent? In my example, positions: 1:A, 2:B, 3:B, 4:..., ... , 100:A. So B is already adjacent, so cost to pair B is 0. So total swaps = 96. But can we achieve 96 swaps with adjacent swaps? Let's simulate: Starting with array: [A, B, B, ... (many filler), A]. After we pair B (they are already adjacent, no swaps needed), we can remove them conceptually. But to actually achieve final arrangement, we need to rearrange so that all couples are adjacent. The final arrangement could be (B,B,A,A,...) or (A,A,B,B,...). If we aim for order B,B,A,A, we could first move the B's together? They already are. Then we need to bring the A's together. Initially A's are at positions 1 and 100. To bring them together, we could move the right A leftwards across all elements between (which include many filler elements) until it meets the left A? But after B's are removed, the filler elements are still there. The number of swaps required to bring the right A next to left A is indeed the number of elements between them, which after B's are removed is 97-1? Actually we need to compute: The filler elements (other couples) may be many. But let's consider simplest: only A and B couples, total 4 elements. But in my example, I used positions up to 100, but there are only 4 elements? Wait 2n is 4 if n=2? But I set n=2? Actually I said two couples, so total 4 elements. But positions 1 and 100 can't be with only 4 elements. So I messed up; we cannot have positions beyond the array length. The array length is 4 for n=2. So my example with positions 1 and 100 is invalid. Let's construct a realistic small example with more couples.

    We need n>2 to have inner couples inside a gap. For n=3, consider positions: couple1: 1 and 6; couple2: 2 and 3; couple3: 4 and 5. So array: [1,2,2,3,3,1]? Wait couple1 = 1, couple2 = 2, couple3 = 3. We need to place them. Let's design: positions: 1:1, 2:2, 3:2, 4:3, 5:3, 6:1. So array = [1,2,2,3,3,1]. Check: couple1 appears at 1 and 6, couple2 at 2-3, couple3 at 4-5.

    Now greedy: leftmost is 1 at pos1, partner at pos6, distance 5 => swaps =4 (since between positions 1 and6 there are 4 elements: 2,2,3,3). Remove couple1 -> remaining array: [2,2,3,3] (positions original 2-5). Then couple2 leftmost at pos1 (value2) partner at pos2 distance1 =>0; then couple3 distance1 =>0. Total swaps =4.

    Now try alternative: pair couple2 first. Starting array [1,2,2,3,3,1]. couple2 already adjacent (positions2-3), so 0 swaps to bring them together? Actually if we want to pair couple2, we could just consider that they are already adjacent, so we could "remove" them without swapping. After removing couple2 (positions2 and3), the array becomes: [1,3,3,1] (positions1,4,5,6 after removal; compress to size4). Now couple3: positions: in new array, 1 is at index? Actually array: [1,3,3,1] with values: pos1:1, pos2:3, pos3:3, pos4:1. So couple3 (value3) appears at new positions2 and3, adjacent, cost0. Then couple1 (value1) appears at positions1 and4, distance=3 -> swaps=2 (since need to bring the right 1 left across the two 3's). Total swaps = 2. That is less than 4. So we have a counterexample? Let's check if we can actually achieve total adjacent swaps = 2 to get all couples adjacent. Starting from [1,2,2,3,3,1], we want to end with all adjacent. Let's see if 2 swaps is possible.

    Goal arrangement could be: [2,2,3,3,1,1] or [1,1,2,2,3,3] etc. Let's attempt to transform to [2,2,1,1,3,3]? Actually we need each couple together. The minimal we computed via alternative order suggests we can achieve with 2 swaps. Let's try to find a sequence of adjacent swaps achieving 2.

    Initial: 1 2 2 3 3 1.

    We could aim for order: 2,2,1,1,3,3? That would require 1's together and 3's together. Let's try: swap positions 3 and4? Let's systematically try to minimize.

    Option 1: Move the last 1 leftwards. Swap position5 and6? Actually position5=3, position6=1 -> swap gives 1 2 2 3 1 3. Now couples: 1's at 1 and5? Not together. Then swap position4 and5: 1 2 2 1 3 3. Now we have 1's at positions1 and4? Actually 1's at 1 and4, not adjacent. Then swap position3 and4: 1 2 1 2 3 3. Now 1's at positions1 and3? Not adjacent. swap position2 and3: 1 1 2 2 3 3 -> done. That's 4 swaps? Let's count: we did swaps: (5,6), (4,5), (3,4), (2,3) = 4 swaps. That's 4, matches greedy.

    Option 2: Maybe aim for order 2,2,3,3,1,1. Let's try: we need 1's together at end. Starting 1 2 2 3 3 1. We could move first 1 to the right? Swap (1,2): 2 1 2 3 3 1. Swap (2,3): 2 2 1 3 3 1. Swap (3,4): 2 2 3 1 3 1. Swap (4,5): 2 2 3 3 1 1 -> total 4 swaps again.

    Option 3: Aim for order 3,3,2,2,1,1? Starting 1 2 2 3 3 1. To get 3's together maybe already together. But we need 2's together (they are already) and 1's together. So seems 1's are separated by 4 elements. To bring them together, the minimal number of swaps needed is at least the number of elements between them, which initially is 4. Because to bring the right 1 next to the left 1, we would need to move it left across those 4 elements, requiring 4 swaps. That suggests the minimal is 4, not 2. But our alternative pairing calculation gave 2 swaps after removing couple2 and couple3 first. However, note that in that calculation we assumed we can "remove" them without cost, but in reality, to achieve final arrangement where couples are together, we may need to also move those inner couples to their correct positions relative to each other. In the alternative, we imagined we pair couple2 and couple3 first, then pair couple1, and we computed cost for couple1 as 2 (the number of remaining elements between its two occurrences after removing couple2 and couple3). But when we actually perform swaps, the process of bringing couple2 and couple3 together might require swaps (but they were already adjacent, so 0). However, after we bring couple1 together, we also need to ensure that couple2 and couple3 remain together and that all are in some order. The final arrangement we would get after performing the steps of the alternative algorithm would be: first we "remove" couple2 and couple3 by conceptually deleting them, then we bring the two 1's together, and then we reinsert the other couples in some order? That's not a direct simulation of swaps.

    Let's see what sequence of swaps corresponds to the alternative order: The greedy algorithm that picks leftmost each time yields a specific target order: the order of first appearances. That algorithm is known to be optimal. So why did we get a lower sum? Possibly because we miscounted: When we pair couple2 first, we remove both 2's from the array, but that removal is not free; we need to actually swap them to be adjacent? In our example they are already adjacent, so removal cost 0. Then we remove couple3 (adjacent, cost 0). Then we have array [1,1] (the two 1's). They are not adjacent? Actually after removing 2's and 3's, we have just the two 1's, but originally they are at positions 1 and 6, after removal of positions 2-5, they become positions 1 and 2, which are adjacent. But wait, after removing the inner elements, the two 1's become adjacent automatically because there is nothing between them. However, in the original array, after we remove the inner elements conceptually, we are not physically removing them; we have to actually move them out of the way. But the idea of counting swaps as the number of elements between the two 1's in the reduced array might correspond to the number of swaps needed to bring the two 1's together after the others are already paired and moved aside? But those others may have to be moved to their final places as well, which could involve additional swaps.

    We need to simulate a process where we bring couples together without assuming others are removed. The known greedy algorithm (the leftmost-first algorithm) works by repeatedly finding the partner of the first element and swapping it leftwards until it is next to the first element, then removing both from consideration. This process is actual sequence of swaps. The total number of swaps performed equals the sum of distances-1 in each step, because each step moves the partner leftwards across the intervening elements. This yields a final arrangement where the couples appear in the order of first appearances. In our example [1,2,2,3,3,1], the greedy would first move the partner of the first 1 (which is at position6) leftwards across positions 2-5, requiring 4 swaps. After that, the array becomes [1,1,2,2,3,3]? Let's simulate: start: [1,2,2,3,3,1]. Step: bring second 1 to position2. Swap positions5 and6: [1,2,2,3,1,3]; swap positions4 and5: [1,2,2,1,3,3]; swap positions3 and4: [1,2,1,2,3,3]; swap positions2 and3: [1,1,2,2,3,3]. Yes, 4 swaps. So greedy yields 4 swaps.

    Now, can we achieve 2 swaps? Let's attempt to find a sequence of 2 adjacent swaps that makes all couples adjacent. Starting array: 1 2 2 3 3 1. After 2 swaps, what are possible arrays? Let's enumerate all possible outcomes within 2 swaps (maybe there is one). Swaps are adjacent. Starting state S0.

    Swap1 possibilities:

    • Swap (1,2): 2 1 2 3 3 1

    • Swap (2,3): 1 2 2 3 3 1 (swap 2 and2 does nothing? Actually a[2]=2, a[3]=2, swapping them yields same array) -> effectively 0 swap if identical? But swapping identical elements doesn't change array, but does it count as a swap? Typically, swapping adjacent positions means exchanging the people at those positions. If they have same number, they are different people but same couple ID. Swapping them would change the arrangement of individuals, but the array of IDs remains the same because IDs are same. However, if the people are distinct, the arrangement changes but we only observe IDs. The problem likely counts swaps regardless of whether the values are equal; swapping two identical values still counts as a swap, but it doesn't affect the final ID sequence. However, performing such swaps would be wasteful; we wouldn't do them. So we consider swaps that change the sequence.

    • Swap (3,4): 1 2 3 2 3 1

    • Swap (4,5): 1 2 2 3 3 1 (swap 3 and3, no change)

    • Swap (5,6): 1 2 2 3 1 3

    So distinct new states: (2,1,2,3,3,1), (1,2,3,2,3,1), (1,2,2,3,1,3). Now from each, apply one more swap.

    Goal state must have each couple adjacent: i.e., pattern where each number appears twice consecutively. Possible patterns: 1,1,2,2,3,3; 1,1,3,3,2,2; 2,2,1,1,3,3; 2,2,3,3,1,1; 3,3,1,1,2,2; 3,3,2,2,1,1. Also could have each couple in either order? Actually adjacent means the two identical numbers next to each other, but they could be in reverse order? For couple1, adjacent positions with both 1's. So indeed the pattern is two consecutive same numbers. So the sequence must be a concatenation of blocks of size 2 with same number, each block number distinct.

    Now check if any of the 1-swap states can become such a pattern with one more swap.

    State A: 2 1 2 3 3 1. Couples: 1's at positions 2 and6; 2's at 1 and3; 3's at 4 and5 (adjacent). Need to get all adjacent. Let's see if one swap can fix. Options:

    • Swap (1,2): 1 2 2 3 3 1 -> becomes 1 2 2 3 3 1 (original) not good.
    • Swap (2,3): 2 2 1 3 3 1 -> now 2's adjacent (good), 1's at 3 and6 not adjacent, 3's adjacent.
    • Swap (3,4): 2 1 3 2 3 1 -> 1's at 2 and6, 2's at1 and4, 3's at3 and5.
    • Swap (4,5): 2 1 2 3 3 1 (same)
    • Swap (5,6): 2 1 2 3 1 3 -> 1's at2 and5, not adjacent. None produce all couples adjacent.

    State B: 1 2 3 2 3 1. Couples: 1's at1 and6; 2's at2 and4; 3's at3 and5. Check swaps:

    • Swap (1,2): 2 1 3 2 3 1 -> similar to A.
    • Swap (2,3): 1 3 2 2 3 1 -> 2's adjacent at3-4, 1's at1 and6, 3's at2 and5.
    • Swap (3,4): 1 2 2 3 3 1 -> this is 1,2,2,3,3,1 which after one more? Actually that's the state after swap: 1,2,2,3,3,1. That's the original state, not all adjacent.
    • Swap (4,5): 1 2 3 3 2 1 -> 3's adjacent at3-4, 1's at1 and6, 2's at2 and5.
    • Swap (5,6): 1 2 3 2 1 3 -> 1's at1 and5? Not adjacent. No.

    State C: 1 2 2 3 1 3. Couples: 1's at1 and5; 2's at2-3 adjacent; 3's at4 and6. Swaps:

    • Swap (1,2): 2 1 2 3 1 3 -> 1's at2 and5, 2's at1 and3, 3's at4 and6.
    • Swap (2,3): 1 2 2 3 1 3 (same)
    • Swap (3,4): 1 2 3 2 1 3 -> 1's at1 and5, 2's at2 and4, 3's at3 and6.
    • Swap (4,5): 1 2 2 1 3 3 -> This yields: 1,2,2,1,3,3. Now check: 1's at positions1 and4? Actually 1's at1 and4 are not adjacent (positions1-2:1,2; positions3-4:2,1; positions4-5:1,3). So 1's are not adjacent. But 2's are at2-3 adjacent, 3's at5-6 adjacent. So not all couples adjacent because 1's are separated.
    • Swap (5,6): 1 2 2 3 3 1 -> original.

    None give all adjacent. So with 2 swaps we cannot achieve the goal. So minimal is at least 3? But we found a sequence of 4 swaps via greedy. But is there a sequence of 3 swaps? Let's try to find any 3-swap sequence.

    We can attempt to search manually. Maybe we can do: start 1 2 2 3 3 1.

    Step1: swap (3,4) -> 1 2 3 2 3 1 (state B) Step2: swap (4,5) -> 1 2 3 3 2 1 (now: 1,2,3,3,2,1). Couples: 1's at1 and6; 2's at2 and5; 3's at3-4 adjacent. Step3: swap (2,3) -> 1 3 2 3 2 1? Actually swapping positions2 and3: 1,3,2,3,2,1 -> 1,3,2,3,2,1. Not good. Or step3: swap (5,6) -> 1 2 3 3 1 2 -> 1's at1 and5? Not adjacent. Other sequence: start swap (5,6) -> 1 2 2 3 1 3 (state C) Then swap (4,5) -> 1 2 2 1 3 3 (as we saw) -> 1,2,2,1,3,3. Now 1's not adjacent. Need one more: swap (3,4) -> 1 2 1 2 3 3 -> gives 1,2,1,2,3,3. Still 1's not adjacent (positions1 and3). swap (2,3) -> 1 1 2 2 3 3 -> done. So that's 4 swaps: we did swaps (5,6), (4,5), (3,4), (2,3). So 4.

    What about: swap (2,3) does nothing; swap (1,2) -> 2 1 2 3 3 1, then swap (5,6) -> 2 1 2 3 1 3, then swap (4,5) -> 2 1 2 1 3 3, then swap (1,2) maybe? That's 4. Hard to see 3.

    Thus minimal appears to be 4, not 2. So our alternative calculation that gave 2 was flawed because after removing couple2 and couple3, we assumed the two 1's become adjacent, but in reality we cannot magically remove them; we need to actually move them out of the way, which incurs swaps. In the process of bringing couple1 together after couple2 and couple3 are already together, we still need to swap the 1's past the other blocks, and the cost may still be the number of elements between them in the original order, which is 4. Actually, if we first bring couple2 and couple3 together (they are already together), we haven't changed the positions of 1's relative to each other. The distance between the two 1's is still 4 (positions 1 and 6). To bring them together, we must move one of them across the other elements. The other elements (2,2,3,3) are four elements. Even if they are already paired as adjacent blocks, moving a 1 across them still requires 4 swaps because each swap moves it one position. However, if we also rearrange the order of blocks, we might be able to reduce total swaps because moving a block of two elements as a unit might be cheaper? But adjacent swaps only swap adjacent individuals; moving a block of two requires moving each element individually. For example, to move the block (2,2) left across (1) etc. However, the total number of swaps needed to achieve a particular final ordering can be computed as the number of inversions between the current sequence and the target sequence, treating each individual as distinct. If we choose a target ordering where the 1's are together and the 2's together and 3's together, but in an order that minimizes inversions, we can compute that distance.

    Let's compute the minimum inversion distance for our example. We'll assign distinct identities to each person. Suppose we label each occurrence: for each couple, we have two persons: i_left (first occurrence) and i_right (second occurrence). But we can choose which is left and right in the final arrangement arbitrarily (they can be swapped). Let's assign: initial array indices 1..6 with values: pos1:1a, pos2:2a, pos3:2b, pos4:3a, pos5:3b, pos6:1b. (We label the first occurrence of each number as a, second as b, but note that for couple1, the second occurrence is at pos6, so we call 1a at pos1, 1b at pos6; for couple2, both at pos2 and3, we can call 2a at pos2, 2b at pos3; for couple3, 3a at pos4, 3b at pos5.)

    Now target arrangements: we need blocks of size2 with both persons from same couple, order within block can be either. The blocks order can be any permutation of couples. So we need to choose an ordering of couples (say order X, Y, Z) and orientation for each block (two possibilities). Then target sequence is either Xa,Xb or Xb,Xa, then Y etc. We need to compute inversions between initial permutation and target permutation, and minimize.

    Let's enumerate some possibilities. Suppose we choose order (2,3,1). Then target could be 2a,2b, 3a,3b, 1a,1b. Compute inversions. Initial order: 1a,2a,2b,3a,3b,1b. Compare to target: target list order: 2a,2b,3a,3b,1a,1b. Count pairs (p,q) where p appears before q in initial but after in target (i.e., out of order). We'll count inversions needed to transform initial into target via adjacent swaps (number of swaps = inversions). This can be computed by for each element, count how many later elements should come before it in target. Alternatively, compute total.

    Let's list initial indices with their labels: positions in initial: 1:1a, 2:2a, 3:2b, 4:3a, 5:3b, 6:1b.

    Now target order: 2a,2b,3a,3b,1a,1b.

    We can map each element to its rank in target: 1a rank=5, 1b rank=6, 2a rank=1, 2b rank=2, 3a rank=3, 3b rank=4.

    Now count inversions in the initial sequence based on ranks: we have sequence of ranks: [5,1,2,3,4,6]. Count pairs (i<j) where rank[i] > rank[j]. Compute: i=1 rank5: compare with later: rank1=1 => 5>1 inversion; rank2=2 =>5>2 inv; rank3=3 =>5>3 inv; rank4=4 =>5>4 inv; rank6=6 =>5<6 not. So 4 inversions from first element. i=2 rank1: compare with later: rank2=2 =>1<2 no; rank3=3 no; rank4=4 no; rank6=6 no =>0. i=3 rank2: compare: rank3=3 no; rank4=4 no; rank6=6 no =>0. i=4 rank3: compare: rank5=4 no; rank6=6 no =>0. i=5 rank4: compare: rank6=6 no =>0. Total inversions =4. So minimal swaps at least 4? Actually this target yields 4 inversions. Could other target yield fewer?

    Try order (2,1,3): target 2a,2b,1a,1b,3a,3b. Ranks: 1a=3,1b=4,2a=1,2b=2,3a=5,3b=6. Initial ranks: [3,1,2,5,6,4]? Wait compute: initial order: 1a(3),2a(1),2b(2),3a(5),3b(6),1b(4). Sequence: 3,1,2,5,6,4. Count inversions: i1=3: later:1<3 inv,2<3 inv,5>3 no,6>3 no,4>3 no? Actually 4>3, so not inversion. So two inversions from first? 3>1 and 3>2 =>2. i2=1: later:2>1 no,5>1 no,6>1 no,4>1 no =>0. i3=2: later:5>2 no,6>2 no,4>2 no =>0. i4=5: later:6>5 no,4<5 inv =>1. i5=6: later:4<6 inv =>1. Total =2+0+0+1+1=4. Also 4.

    Try order (1,2,3): target 1a,1b,2a,2b,3a,3b. Ranks: 1a=1,1b=2,2a=3,2b=4,3a=5,3b=6. Initial ranks: [1,3,4,5,6,2]? Wait initial: 1a(1),2a(3),2b(4),3a(5),3b(6),1b(2). Sequence:1,3,4,5,6,2. Count inversions: i1=1: later all >1 =>0. i2=3: later:4>3 no,5>3 no,6>3 no,2<3 inv =>1. i3=4: later:5>4 no,6>4 no,2<4 inv =>1. i4=5: later:6>5 no,2<5 inv =>1. i5=6: later:2<6 inv =>1. Total=4.

    Try order (3,2,1): target 3a,3b,2a,2b,1a,1b. Ranks: 3a=1,3b=2,2a=3,2b=4,1a=5,1b=6. Initial ranks: [5,3,4,1,2,6]? Actually initial: 1a(5),2a(3),2b(4),3a(1),3b(2),1b(6). Sequence:5,3,4,1,2,6. Count inversions: i1=5: later:3<5 inv,4<5 inv,1<5 inv,2<5 inv,6>5 no =>4. i2=3: later:4>3 no,1<3 inv,2<3 inv,6>3 no =>2. i3=4: later:1<4 inv,2<4 inv,6>4 no =>2. i4=1: later:2>1 no,6>1 no =>0. i5=2: later:6>2 no =>0. Total=4+2+2=8.

    So minimal we found is 4. So indeed minimal swaps = 4. Greedy gave 4. So our earlier alternative gave 2 incorrectly.

    Thus the greedy algorithm seems to give the correct answer for this example.

    Now, is there a formal proof? I recall that this problem appears on Codeforces: "B. Minimum number of moves" maybe. Actually there is CF Round # 1462 problem "B. Last Year's Substring"? No. There is a known problem "B. Pairs" from Codeforces Round # 1392? Not sure.

    I think the solution is indeed to simulate the process: iterate i from 0 to 2n-1 step 2, find the index of the partner of the element at position i (now in the current list), and add (index_of_partner - i - 1) to the answer, then remove both. This runs in O(n^2). Since n <= 100, it's fine.

    But we need to ensure correctness for all cases. I can attempt a proof sketch:

    We can think of the array as a sequence of 2n items, each belonging to a couple. Consider the following algorithm: while array not empty, let x be the first element. Let y be the partner of x (the other occurrence of same number). Bring y adjacent to x by repeatedly swapping it leftwards with its left neighbor; each such swap reduces the distance between x and y by 1. The number of swaps performed in this step equals the number of elements between x and y, i.e., distance-1. Then remove both x and y from the array (they are now at the beginning and adjacent; we can ignore them as they are already correct and will not be moved again). Continue with the rest.

    Now we need to argue that this greedy yields the minimal total swaps.

    Consider any optimal sequence of adjacent swaps that results in all couples adjacent. Observe that in any such final arrangement, consider the couple that ends up as the first block (i.e., the two identical numbers occupying positions 1 and 2). In the original order, these two individuals are somewhere. We can "simulate" bringing them together by moving the right one leftwards until it is next to the left one. The key claim: there exists an optimal solution that does not move any element from before the left member of that couple (i.e., elements to the left of the left member) across the left member; essentially, the relative order of elements before the left member can be preserved, and they will end up after the couple? Actually, if the first block is couple i, then in the final arrangement, everything before that block is nothing; it's the first block. So any elements that originally were before the left member of i must be moved to the right of the block. That would require swaps. However, we can argue that the minimal number of swaps to achieve a configuration where couple i is the first block is at least the distance between its two occurrences minus something, but maybe it's exactly the number of elements between them plus the number of elements before the left member? Actually, if we aim to make couple i the first block, we need to bring the two i's to the front and adjacent. One way: first bring the left i to position1 (if not already) by swapping it leftwards across elements before it. But we could also bring the right i to the front. However, in the greedy we didn't move the left i; we left it at the first position (since it's already the leftmost after previous removals). But in the original array, the leftmost element might not be part of the first block in the optimal solution. So maybe the greedy chooses the first block as the couple whose left occurrence is earliest (i.e., the first element). But could an optimal solution have a different couple as first block? Possibly yes. Let's examine.

    Suppose the first element in the original array is from couple A. Could it be optimal to have couple B as the first block? That would require moving the element at position1 (which is A) somewhere else. That would involve swapping it to the right across some elements, incurring swaps. Alternatively, we could move the other A later. Might be cheaper to keep A as first block if it doesn't cost much. But maybe there is a case where moving A out of the way and bringing B to front reduces total swaps. For instance, if A's partner is far away, bringing them together as first block might require many swaps, while if we make B first, the total cost might be lower. But then we would have to move A later, maybe still expensive. So we need to see if greedy (always making the first element's couple the first block) can be suboptimal.

    Let's attempt to construct a counterexample. Consider array: [1,2,3,1,2,3]? Wait each appears twice: n=3. Let's try to design such that first element's partner is far away, but another couple's two are close together and could be made first with little cost, and overall cost less.

    Take n=3: positions: 1:1, 2:2, 3:3, 4:2, 5:1, 6:3. So array: 1 2 3 2 1 3. Couple1: positions 1 and5. Couple2: 2 and4. Couple3: 3 and6.

    Greedy: leftmost 1 at pos1, partner at pos5, distance=4 => swaps=3 (since between: indices2-4: 2,3,2 -> 3 elements). Remove, remaining [2,3,2,3]? Actually after removal: original positions2,3,4,6? Wait remove positions1 and5, we have elements at original indices2:2,3:3,4:2,6:3 -> [2,3,2,3]. Now leftmost 2 at new pos1, partner at new pos3 (since values: 2,3,2,3 => partner of first 2 at pos3), distance=2 => swaps=1. Then remaining [3,3] cost0. Total swaps=4.

    Now try alternative: make couple2 first? Could we achieve total <4? Suppose we aim final order: 2,2,1,1,3,3. Let's compute inversion distance as before. Assign distinct persons: 1a at pos1,1b at pos5; 2a at pos2,2b at pos4; 3a at pos3,3b at pos6. Target order: 2a,2b,1a,1b,3a,3b. Ranks: 1a=3,1b=4,2a=1,2b=2,3a=5,3b=6. Initial order ranks: [3,1,5,2,4,6]? Actually initial: 1a(3),2a(1),3a(5),2b(2),1b(4),3b(6). So ranks:3,1,5,2,4,6. Count inversions: i1=3: later 1<3 inv,5>3 no,2<3 inv,4>3 no,6>3 no =>2. i2=1: later 5>1 no,2>1 no,4>1 no,6>1 no =>0. i3=5: later 2<5 inv,4<5 inv,6>5 no =>2. i4=2: later 4>2 no,6>2 no =>0. i5=4: later 6>4 no =>0. Total=4. So again 4.

    What about order 2,2,3,3,1,1? Target:2a,2b,3a,3b,1a,1b. Ranks:1a=5,1b=6,2a=1,2b=2,3a=3,3b=4. Initial ranks:3? Wait initial order:1a(5),2a(1),3a(3),2b(2),1b(6),3b(4) -> ranks:5,1,3,2,6,4. Inversions: i1=5: later 1<5 inv,3<5 inv,2<5 inv,6>5 no,4<5 inv =>4. i2=1: later 3>1 no,2>1 no,6>1 no,4>1 no =>0. i3=3: later 2<3 inv,6>3 no,4>3 no? 4>3 yes, not inv; so 1. i4=2: later 6>2 no,4>2 no =>0. i5=6: later 4<6 inv =>1. Total=6. So worse.

    Order 3,3,1,1,2,2? Target:3a,3b,1a,1b,2a,2b. Ranks:1a=3,1b=4,2a=5,2b=6,3a=1,3b=2. Initial ranks:5? Actually initial:1a(3),2a(5),3a(1),2b(6),1b(4),3b(2) -> ranks:3,5,1,6,4,2. Count: i1=3: later 5>3 no,1<3 inv,6>3 no,4>3 no,2<3 inv =>2. i2=5: later 1<5 inv,6>5 no,4<5 inv,2<5 inv =>3. i3=1: later 6>1 no,4>1 no,2>1 no =>0. i4=6: later 4<6 inv,2<6 inv =>2. i5=4: later 2<4 inv =>1. Total=8.

    So minimal seems 4.

    Thus greedy yields 4, which matches minimal.

    Now let's try another: maybe n=4. Could there be a case where first element's couple is not the first block in an optimal arrangement? Consider array: 1 2 2 1 3 4 4 3? Actually that's already pairs adjacent? Not sure. Let's try: [1,2,3,2,1,3]? Already did.

    Maybe more complex: Suppose we have couples A, B, C. First element is A, but A's partner is far (position 2n). However, there is couple B with both occurrences near the beginning but also inside A's gap. If we make B first, we might reduce total swaps? Let's try to create a scenario.

    We need to check if there exists an optimal solution where the first block is not the couple of the first element. If such a solution exists, then the greedy which always makes the first element's couple the first block would be suboptimal.

    Consider the following: array: [1,2,2,3,3,1] we already examined. In that case, first element is 1, partner at end. Could an optimal solution have first block = 2? That would be order starting with 2,2,... Let's compute inversion distance for target starting with 2,2,... we computed earlier for order (2,1,3) gave 4 inversions, same as greedy. So not better.

    What about [1,2,3,1,2,3] we did, first element 1, greedy cost 4, any other order? (2,2,1,1,3,3) gave 4, (3,3,1,1,2,2) gave 8, (2,2,3,3,1,1) gave 6. So all 4 or more.

    Maybe we can try larger n. But I recall that this problem is known and the greedy solution is correct. Actually, I've seen a problem: "Minimum adjacent swaps to make all couples together" on some online judge. The solution is to repeatedly delete the leftmost element and its partner. It's often explained as: Each time you bring the partner of the leftmost element to its right, the swaps needed equals the number of elements between them, which is optimal because any swap that moves something else across the pair would be wasted.

    We can attempt a more rigorous argument:

    Define the "inversion count" between couples. Consider the order of first occurrences. Let the couples be processed in the order they appear first when scanning left to right. This order defines a permutation of couples. Claim: The minimum number of swaps equals the sum over each couple of the number of other couples that start between its two occurrences. Because each such other couple will have to cross over one of the elements of this couple during the process, incurring a swap. Actually, in the greedy, the cost for a couple equals the number of elements between its two occurrences after removing earlier couples. Those elements correspond to the other couples that are still unmatched at that point and whose both occurrences lie inside that interval? But not exactly both; they could have one inside and one outside? However, if a couple has its first occurrence after the left element but before the right element, its second occurrence could be either inside or outside. But when we process a couple i (with leftmost occurrence being the current first element), all couples that have first occurrence before i have been removed. Among remaining couples, those that have exactly one occurrence between the two i's will contribute to the gap count. Actually, the number of elements between the two i's in the reduced array is equal to the total number of occurrences of other couples that lie between the positions of i's, but each such other couple contributes either 1 or 2 elements depending on whether one or both of its occurrences are between. However, note that if a couple j has its first occurrence between x_i and y_i, its second occurrence could be either before y_i or after y_i. If it is also before y_i, then both are between, contributing 2 to the gap. If the second is after y_i, then only one is between, contributing 1. But in the reduced array, after removing earlier couples, all elements between x_i and y_i are those that have not been removed. Since we remove couples only when their leftmost occurrence is before x_i, any couple j with first occurrence between x_i and y_i is still present and both its occurrences are still in the array; however, if its second occurrence is after y_i, then that second occurrence lies to the right of y_i, not between. So only the first occurrence of j lies between x_i and y_i; the second is outside. So in the reduced array, the gap between the two i's includes the first occurrence of j (and maybe other elements) but not its second occurrence. So the number of elements between them is the count of occurrences of other couples that lie strictly between the two i positions. This count is (y_i - x_i - 1) minus the number of removed elements that were in that interval. Removed elements are those from couples whose leftmost occurrence was before x_i, and if their right occurrence was in the interval, it would be removed. So the gap may be less than original distance-1.

    Now, could there be a scenario where processing a couple with leftmost not first yields lower total? Suppose we have couples A and B. A leftmost at position1, B leftmost at position2. A's partner at far right, B's partner at position3 (close). Options:

    • Greedy: process A first: cost = number of elements between A's two = many (including B's two? Actually if B's partner is at pos3, B's two are at 2 and 3, both between A's positions 1 and something? If A's partner is at pos4, then between positions1 and4: elements at 2,3. So cost =2. Then process B: after removal of A, B's two become adjacent? Actually after removing A's two (positions1 and4), remaining are positions2 and3, which are B's two, adjacent, cost0. Total=2.
    • Alternative: process B first: B's leftmost at position2? But the first element is A, not B. To process B first, we would need to move A out of the way? Actually if we want B to become the first block, we would need to bring B's two together at the front. B's leftmost is at position2, so we would need to move the element at position2 leftwards across A to become first? But that would require swapping A and B, costing 1 swap to move B's first to position1? But then B's partner is at position3, after moving B's first to pos1, the two B's are at positions1 and3, distance2 -> need 1 swap to bring them together? Let's simulate: start: [A,B,B_partner? Actually B's two are at 2 and3; A at1, A partner at4. If we want B first, we might aim for final order B,B,A,A. Steps: swap positions1 and2 -> [B,A,B,A] (since A at1, B at2 swap gives B at1, A at2; B at3 remains; A at4). Now we have B at1, A at2, B at3, A at4. Need to bring the two B's together: swap positions2 and3 -> [B,B,A,A] done. That's 2 swaps total. Same as greedy. So no improvement.

    What if A's partner is very far and B's partner also far? Try to find a case where making B first reduces total cost.

    Consider three couples: A at pos1, B at pos2, C at pos3, and their partners: A partner at pos6, B partner at pos5, C partner at pos4. So array: 1,2,3,3,2,1? Actually let's assign: n=3, positions: 1:A, 2:B, 3:C, 4:C, 5:B, 6:A. So array: [1,2,3,3,2,1]. Greedy: leftmost 1 at pos1, partner at pos6, distance5 => swaps=4 (elements 2,3,3,2). Remove, remaining [2,3,3,2]? Actually after removal: positions2,3,4,5 -> [2,3,3,2]. Then leftmost 2 at new pos1, partner at new pos4, distance3 => swaps=2. Then [3,3] cost0. Total=6.

    Now alternative: maybe make couple B first? Let's compute inversion distances.

    Assign distinct: A1 at1, A2 at6; B1 at2, B2 at5; C1 at3, C2 at4. Target orders:

    • Order (A,A,B,B,C,C): target A1,A2,B1,B2,C1,C2. Ranks: A1=1,A2=2,B1=3,B2=4,C1=5,C2=6. Initial ranks: [1,3,5,6,4,2]? Wait initial order: A1(1), B1(3), C1(5), C2(6), B2(4), A2(2) => ranks:1,3,5,6,4,2. Count inversions: i1=1:0; i2=3: later 5>3 no,6>3 no,4>3 no,2<3 inv ->1; i3=5: later 6>5 no,4<5 inv,2<5 inv ->2; i4=6: later 4<6 inv,2<6 inv ->2; i5=4: later 2<4 inv ->1; total=6.
    • Order (B,B,A,A,C,C): B1,B2,A1,A2,C1,C2. Ranks: A1=3,A2=4,B1=1,B2=2,C1=5,C2=6. Initial ranks: [3,1,5,6,2,4]? Actually initial: A1(3),B1(1),C1(5),C2(6),B2(2),A2(4) => ranks:3,1,5,6,2,4. Inversions: i1=3: later 1<3 inv,5>3 no,6>3 no,2<3 inv,4>3 no ->2; i2=1: later 5>1 no,6>1 no,2>1 no,4>1 no ->0; i3=5: later 6>5 no,2<5 inv,4<5 inv ->2; i4=6: later 2<6 inv,4<6 inv ->2; i5=2: later 4>2 no ->0; total=6.
    • Order (C,C,B,B,A,A): C1,C2,B1,B2,A1,A2. Ranks: A1=5,A2=6,B1=3,B2=4,C1=1,C2=2. Initial ranks: [5,3,1,2,4,6]? Actually initial: A1(5),B1(3),C1(1),C2(2),B2(4),A2(6) => ranks:5,3,1,2,4,6. Inversions: i1=5: later 3<5 inv,1<5 inv,2<5 inv,4<5 inv,6>5 no ->4; i2=3: later 1<3 inv,2<3 inv,4>3 no,6>3 no ->2; i3=1: later 2>1 no,4>1 no,6>1 no ->0; i4=2: later 4>2 no,6>2 no ->0; i5=4: later 6>4 no ->0; total=6.
    • Order (B,B,C,C,A,A): B1,B2,C1,C2,A1,A2. Ranks: A1=5,A2=6,B1=1,B2=2,C1=3,C2=4. Initial ranks: [5,1,3,4,2,6]? Actually initial: A1(5),B1(1),C1(3),C2(4),B2(2),A2(6) => 5,1,3,4,2,6. Inversions: i1=5: later1<5 inv,3<5 inv,4<5 inv,2<5 inv,6>5 no ->4; i2=1: later3>1 no,4>1 no,2>1 no,6>1 no ->0; i3=3: later4>3 no,2<3 inv,6>3 no ->1; i4=4: later2<4 inv,6>4 no ->1; i5=2: later6>2 no ->0; total=6.
    • Order (C,C,A,A,B,B): ranks: A1=3,A2=4,B1=5,B2=6,C1=1,C2=2. Initial: A1(3),B1(5),C1(1),C2(2),B2(6),A2(4) => 3,5,1,2,6,4. Inversions: i1=3: later5>3 no,1<3 inv,2<3 inv,6>3 no,4>3 no ->2; i2=5: later1<5 inv,2<5 inv,6>5 no,4<5 inv ->3; i3=1: later2>1 no,6>1 no,4>1 no ->0; i4=2: later6>2 no,4>2 no ->0; i5=6: later4<6 inv ->1; total=6.

    All give 6. So minimal is 6, greedy gave 6. So no improvement.

    Maybe we can try n=4. But I suspect the greedy is optimal.

    Search memory: This problem is from Codeforces Round # 158 (Div. 2) "C. Balls and Boxes"? Not sure. Actually I recall a problem "C. Felicity is Coming!" no. Another: "B. Minimum number of steps" maybe? There's also a known problem: given a string with each character appearing twice, find minimum adjacent swaps to make the string a "double string" where each character appears twice consecutively. The solution is exactly the greedy we described. I've seen editorial: "We can process the string from left to right, whenever we see a character, we locate its other occurrence and bring it next to it, count the distance minus one, and delete both." And they prove optimality by exchange argument.

    Let's try to sketch a proof: Consider any optimal sequence of swaps. Look at the first element of the original array, call it x. Consider its partner, call it x'. In the final arrangement, x and x' must be adjacent. They could be somewhere, not necessarily at the beginning. Suppose in the final arrangement, the block containing x and x' is not the first block; there is some other block (y,y) before it. Then we can modify the sequence of swaps to make (x,x') the first block without increasing the number of swaps. The idea: Because x is already at the leftmost position initially, any swap that moves an element from left of x is impossible (since nothing left). So to have something before x in the final arrangement, we must have moved x to the right at some point. That means we swapped x with some element to its right. Each such swap moves x to the right by one and moves some other element to the left. Conversely, we could instead avoid moving x to the right, and instead move the elements that would end up before x to the right of x, essentially reversing the roles. By doing so, we might reduce swaps or keep same. More formally, we can show that there exists an optimal solution where the first element (from original array) ends up in the first block (i.e., its couple is at the very beginning). Then by induction, the greedy is optimal.

    Let's attempt a more rigorous exchange argument:

    Claim: There exists an optimal sequence of adjacent swaps that results in a configuration where the first element of the original array (call it a) is part of the first block (i.e., positions 1 and 2 occupied by the couple of a). Proof: Take any optimal final arrangement. If a's block is not first, then there is some block B that comes before a's block. Consider the leftmost position of a in the final arrangement; call it p (either left or right of its partner). Since a is at position1 initially, to end up at position p>1, it must have been moved to the right by some swaps. Each swap that moved a to the right exchanged a with an element to its right. The elements that ended up before a in the final arrangement must have crossed over a from the right to the left at some point. Now, we can modify the sequence: instead of moving a to the right, keep a fixed at position1 and move all elements that end up before a to the right of a by swapping them with a? But that might increase swaps? Actually, consider the set of elements that appear before a in the final arrangement. In the original, these elements were originally to the right of a (since a is at leftmost). To get them before a, they must have crossed over a to the left, which required swaps. If we instead never move a to the right, and instead move those elements to the right of a (i.e., not cross), we could avoid those swaps. But then the final arrangement would have a at the beginning, and those elements would be after a, which changes the order. However, we also need to bring a's partner adjacent to a. Possibly the number of swaps saved by not moving a to the right could be used to bring a's partner to position2 with no extra cost? Need to compare.

    Alternatively, we can think in terms of inversion count. The minimal number of swaps to achieve any target order is the number of inversions between the initial permutation (with distinct labels) and that target. So we need to choose a target order (blocks) that minimizes inversions. The greedy algorithm implicitly picks a target order: the order of first appearances. We need to show that this order yields minimal inversions. This is reminiscent of the problem of sorting by reversals or something. Perhaps we can prove that the order of first appearances minimizes the number of cross inversions.

    Define for each couple i, let its first occurrence position be L_i, second occurrence R_i (with L_i < R_i). In the final arrangement, couples will appear in some order π. The inversion count between initial and final can be expressed in terms of these positions and the order π. Might be that the sum over i of (number of j such that L_i < L_j < R_i) is the minimal possible? That sum is exactly the greedy cost? Let's compute: For the greedy, cost = sum over i (when processed in increasing L_i) of (number of elements between L_i and R_i after removing earlier couples). That equals sum over i of (number of j such that L_i < L_j < R_i) * 1? Not exactly: for each other couple j, if both its occurrences lie between L_i and R_i, then when processing i, both of j's elements are between, contributing 2 to the gap. But the greedy cost counts each element individually. So total swaps = sum over i ( (R_i - L_i - 1) - 2*(# of couples k with L_k < L_i and R_k between L_i and R_i?) Actually after removal of earlier couples, the gap reduces. There might be a closed form.

    Alternatively, consider the number of swaps needed if we arrange couples in order of increasing L_i (i.e., first appearance). That total swaps can be computed as: For each pair of couples i and j, if their intervals [L_i,R_i] and [L_j,R_j] interleave in certain ways, they contribute some number of swaps. Possibly the total equals the number of intersecting pairs of intervals, where each crossing contributes 2? Let's test with intervals: In example 1, intervals: 1:[1,2] (adjacent), 2:[3,6], 3:[4,5], 4:[7,8]. Intersections: 2 and 3 intersect (since 3<4<5<6). That's one crossing. The answer is 2, not 2*1? Actually 2. If we had both occurrences of j inside i's interval, does that contribute 2? In example 1, 3's interval is inside 2's interval, and the answer included 2 swaps for couple2, and couple3 cost 0 later. So the crossing contributed 2 to total? But total 2, so yes maybe each such nesting contributes 2? But what about overlapping where one endpoint is inside but the other outside? That may contribute 1. The greedy total seems to equal the total number of "inversions" between the order of first occurrences and the order of second occurrences? Hmm.

    Nevertheless, given the constraints and known solutions, the greedy is widely accepted.

    But wait, the problem statement says "Allen wants to line everyone up for a final picture. The 2n people line up, but Allen doesn't like the ordering. Allen prefers if each pair occupies adjacent positions in the line, as this makes the picture more aesthetic." And we need the minimum number of adjacent swaps. This is exactly the "Couples Holding Hands" problem but with adjacent swaps. The LeetCode problem "Couples Holding Hands" asks for the minimum number of swaps of any two people (not necessarily adjacent) to make couples sit together. That problem has solution using union-find or greedy swaps on pairs. That number is different (n - number of cycles). But here swaps are adjacent. So it's different.

    Given n ≤ 100, even O(n^2) is fine. So implement greedy.

    But is there a nuance? The input numbers are from 1 to n each appearing twice. So we can store positions.

    Implementation plan:

    Read n, read array of length 2n. We'll simulate the process on a list (vector) of integers. Initialize answer = 0. While list not empty: let x = list[0]. Find the index j > 0 such that list[j] == x (the partner). Since there are exactly two, we can search linearly from index 1. Let dist = j - 0. The number of swaps needed = j - 1 (since we need to bring j to position 1 by swapping leftwards j-1 times). Add (j - 1) to answer. Remove elements at indices 0 and j from the list. (When removing, we need to delete both, careful with order: after removing index j first? If we remove index 0 first, indices shift. Better: erase index j first (since j>0) then erase index 0. Or we can just use a vector and erase using iterators: auto it = list.begin(); int target = *it; find next occurrence of target; int dist = distance(list.begin(), find(it+1, list.end(), target)); answer += dist; then erase the found element (at it+dist) and then erase it (the first). That works because after erasing the found element, the iterator to first is still valid? If we erase the found element first, the list shifts left for indices after it; but the first element's position remains 0, so we can then erase begin(). Let's do: after finding iterator pos = find(it+1, list.end(), target); dist = pos - (it+1)? Actually distance from it to pos is dist indices apart. Number of swaps = dist because moving from pos to it+1 requires (dist-1)? Let's think: list positions: 0: first, then 1... up to pos index = d. The partner is at index d. To bring it next to first, we need to swap it leftwards d-1 times. So answer += d-1. Then we need to erase both. If we erase the element at pos first, the list size reduces by 1 and indices after pos shift left. The first element remains at index0. Then we erase the first element at begin(). That's fine.

    Alternatively, we can directly compute answer without simulation by using a Fenwick tree to count remaining elements. But simulation is simpler given n ≤ 100.

    Edge cases: When the partner is immediately next (index1), then d=1, swaps=0, erase both.

    Complexity: O(n^2) because each iteration we scan up to O(2n) and removal O(n). With n=100, trivial.

    Let's test on the examples:

    Example1: [1,1,2,3,3,2,4,4] Iter1: first=1, find partner at index1 -> d=1 -> ans+=0. Erase both -> list becomes [2,3,3,2,4,4] Iter2: first=2, find partner: scanning: index1=3, index2=3, index3=2? Actually list: [2,3,3,2,4,4]; partner at index3 (0-indexed? Actually indices:0:2,1:3,2:3,3:2,4:4,5:4). So d=3 -> ans+=2 (3-1). Erase index3 then index0 -> list becomes [3,3,4,4]? After erasing index3 first: erase the 2 at index3 -> list becomes [2,3,3,4,4] (since first element still 2 at index0). Then erase index0 -> list becomes [3,3,4,4]. Iter3: first=3, partner at index1 -> d=1 -> ans+=0. Erase -> [4,4]. Iter4: first=4 partner index1 -> ans+=0. Total ans=2. Correct.

    Example2: [1,1,2,2,3,3] -> all d=1 -> ans=0.

    Example3: [3,1,2,3,1,2] Iter1: first=3, partner at index3? indices:0:3,1:1,2:2,3:3,4:1,5:2 -> d=3 -> ans+=2. Erase index3 then index0 -> list becomes [1,2,1,2]? After erasing index3: list becomes [3,1,2,1,2]; then erase index0: [1,2,1,2]. Iter2: first=1, partner at index2 (0:1,1:2,2:1,3:2) -> d=2 -> ans+=1. Erase index2 then index0 -> list becomes [2,2]. Iter3: first=2 partner index1 -> ans+=0. Total 3. Correct.

    So algorithm works.

    Now, is there any scenario where the partner of the first element is not the nearest? That's fine.

    Thus we can implement.

    But we should consider if there is any more efficient method? Not needed.

    Now, let's confirm with a few more tests.

    Case: n=1, array: [1,1] -> ans=0.

    Case: n=2, array: [2,1,1,2] -> first=2, partner at index3? indices 0:2,1:1,2:1,3:2 => d=3 -> ans+=2. Erase partner at 3 then first -> list becomes [1,1] -> ans+=0 => total=2. Is that minimal? Let's check: [2,1,1,2] to get [1,1,2,2] or [2,2,1,1]. To achieve [1,1,2,2]: swap positions1-2? Actually we can: swap (1,2) -> [1,2,1,2]; swap (2,3) -> [1,1,2,2] -> 2 swaps. To achieve [2,2,1,1]: swap (2,3) -> [2,1,2,1]; swap (1,2) -> [1,2,2,1]? That's not. Alternatively: swap (3,4) -> [2,1,2,1]; then swap (2,3) -> [2,2,1,1] -> 2 swaps. So 2 is minimal. Good.

    Case: [1,2,2,1] -> first=1, partner at index3 -> d=3 -> ans+=2. After removal, [2,2] -> ans+=0 => total=2. As earlier, 2 swaps minimal. Good.

    So seems consistent.

    Thus solution: simulate the described process.

    Time complexity O(n^2) with n up to 100, fine.

    We'll code in C++.

    Implementation details:

    • Read n, then read 2n integers into a vector a(2*n).
    • We'll use a list (vector) to manipulate.
    • While list not empty: int first = list[0]; auto it = find(list.begin()+1, list.end(), first); // find partner int dist = it - list.begin(); // index of partner ans += dist - 1; list.erase(it); // erase partner first list.erase(list.begin()); // erase first
    • Print ans.

    But careful: after erasing partner, the begin iterator may remain valid? Yes, we hold the list vector, erase using iterator it. After erasing, the vector elements shift, but the iterator to begin (list.begin()) still points to the first element (unless we erased the first element, which we didn't yet). So it's fine.

    Potential issue: if partner is at index 1, then dist=1, ans+=0. Then erase it (list.begin()+1) then erase list.begin().

    Works.

    Edge: If list has size 2, after erasing partner then first, list becomes empty.

    We should ensure that find always succeeds because each number appears exactly twice. Since first appears at index0, there must be another occurrence.

    Thus solution is straightforward.

    But wait, the problem might be trickier: Could there be a scenario where the partner of the first element is actually before? No, because we take first as the leftmost element, so partner must be to the right.

    Thus final code.

    But before finalizing, double-check if there is any known counterexample where greedy fails. Let's search the internet in my mind: I recall a problem "minimum adjacent swaps to make all 1's together" for binary array, which can be solved by median. That's different. For this problem, I've definitely seen the greedy solution on Codeforces: "A. Sereja and Dima"? No. Actually there is Codeforces Round # 158 (Div. 2) problem "C. Balls and Boxes"? Not that.

    Another similar problem: "Minimize adjacent swaps to make string a palindrome" is NP-hard. So not.

    Let's attempt to think about potential counterexample more systematically. Consider we have couples A, B, C. We want to see if making a different couple first could reduce total swaps. Let L_i be first occurrence positions in the original array. Without loss, order of first occurrences is some permutation. Greedy will process in that order. Now suppose we choose a different order π for the final blocks. The number of adjacent swaps needed to achieve that order from the original is the number of inversions between the sequence of individuals and the target. Possibly there is a known result: the order of first occurrences minimizes the number of inversions. This is similar to the problem of finding a permutation that minimizes the sum of distances between matched pairs when you have to pair them in order? Might be related to the fact that the sequence of first occurrences gives a "non-crossing" matching? Actually, if we pair by order of first appearances, we get a non-crossing matching? Not exactly.

    We can also think of it as: The greedy algorithm is equivalent to bubble-sorting the array to a target where the couples appear in order of first occurrence, and the swaps counted are exactly the number of inversions between the current order and that target. Since any other target order would have at least as many inversions, it's optimal. This might be provable by considering the pairs (i,j) of couples and showing that if we swap the order of two adjacent couples in the target order, the inversion count does not decrease when the intervals are nested? Something like that.

    But given the problem is from an online judge (likely Codeforces or another contest) and n up to 100, the intended solution is this greedy, so I'm confident.

    Thus final answer.

    Now we can write the solution. But ensure to use 0-indexing properly.

    Implementation in C++:

    #include #include #include using namespace std;

    int main() { int n; cin >> n; vector a(2n); for (int i = 0; i < 2n; ++i) cin >> a[i]; vector list = a; int ans = 0; while (!list.empty()) { int x = list[0]; // find partner auto it = find(list.begin()+1, list.end(), x); int d = it - list.begin(); ans += d - 1; list.erase(it); list.erase(list.begin()); } cout << ans << endl; return 0; }

    Testing on given examples yields correct.

    But note: The input may be large? n up to 100, fine.

    Potential improvement: We could compute answer directly using BIT to simulate removal and count distance, but not needed.

    Now, I should also consider the possibility of identical numbers: The find will locate the first occurrence after index0, which is fine because there are exactly two.

    Double-check: In case the two identical numbers are adjacent and at the front, d=1, ans+=0, we remove both correctly.

    Edge: If the array length is 2 (n=1), after first iteration list becomes empty, ans=0.

    All good.

    Thus answer.

    But wait, the problem might be from an OI with higher constraints? n up to 100 is small, so O(n^2) is fine.

    However, I've seen a similar problem with n up to 10^5? Actually there is a problem "minimum number of swaps to make couples sit together" but that is arbitrary swaps, not adjacent. For adjacent swaps, constraints are often up to 10^5? Possibly, but here n <= 100, so it's even easier.

    Thus the solution is final.

    Now, let's provide explanation for correctness: Use greedy, each step we bring the partner of the leftmost element next to it, costing number of elements between them. This is optimal because any optimal solution must at some point bring these two together, and doing it early does not increase total cost and allows us to treat the rest independently.

    I can write a proof outline: Show that there exists an optimal sequence where the first operation deals with the first element and its partner, and that the number of swaps needed to bring them together is exactly the number of elements currently between them, and any other sequence would require at least that many swaps involving these two. Then by induction on n, the algorithm yields minimum.

    We'll include that reasoning in the solution description.

    Now, produce final answer. We can solve the problem by simulating a greedy process: repeatedly take the first person in the current line, locate their partner, bring the partner adjacent to them by swapping it leftwards, and then remove the now‑adjacent couple from further consideration. The number of swaps needed in one step equals the distance between the two partners minus one, i.e. the number of people standing between them.

    This greedy strategy is optimal. A sketch of the proof:

    • Consider the leftmost person in the current line. In any optimal sequence of swaps that ends with all couples adjacent, this person must eventually be next to their partner.
    • Bringing that partner to the leftmost position’s right neighbor requires at least as many swaps as there are people currently between them, because each such person must be crossed by the partner.
    • Performing these swaps first does not affect the minimality for the rest: after the couple becomes adjacent and is removed, the remaining problem is independent and can be solved optimally by induction.

    Thus the total number of swaps obtained by the greedy algorithm is the minimum possible.

    The implementation runs in O(n²) time (n ≤ 100), which is more than fast enough.

    #include <iostream>
    #include <vector>
    #include <algorithm>
    using namespace std;
    
    int main() {
        int n;
        cin >> n;
        vector<int> a(2 * n);
        for (int i = 0; i < 2 * n; ++i)
            cin >> a[i];
    
        vector<int> line = a;
        int ans = 0;
    
        while (!line.empty()) {
            int first = line[0];
            // find the partner (the other occurrence of the same number)
            auto partner = find(line.begin() + 1, line.end(), first);
            int dist = partner - line.begin();      // distance between the two
            ans += dist - 1;                        // swaps needed
            line.erase(partner);                    // remove the partner
            line.erase(line.begin());               // remove the first element
        }
    
        cout << ans << endl;
        return 0;
    }