Skip to content
TheChatArchiveThe Chat Archive
DeepSeekDeepseek v3.2· deepseekHugging Face Frontier Reasoning Traces

Gildong was hiking a mountain, walking by millions of trees. Inspired by them, he…

  1. User

    Gildong was hiking a mountain, walking by millions of trees. Inspired by them, he suddenly came up with an interesting idea for trees in data structures: What if we add another edge in a tree?

    Then he found that such tree-like graphs are called 1-trees. Since Gildong was bored of solving too many tree problems, he wanted to see if similar techniques in trees can be used in 1-trees as well. Instead of solving it by himself, he's going to test you by providing queries on 1-trees.

    First, he'll provide you a tree (not 1-tree) with n vertices, then he will ask you q queries. Each query contains 5 integers: x, y, a, b, and k. This means you're asked to determine if there exists a path from vertex a to b that contains exactly k edges after adding a bidirectional edge between vertices x and y. A path can contain the same vertices and same edges multiple times. All queries are independent of each other; i.e. the added edge in a query is removed in the next query. Input

    The first line contains an integer n (3 ≤ n ≤ 10^5), the number of vertices of the tree.

    Next n-1 lines contain two integers u and v (1 ≤ u,v ≤ n, u ≠ v) each, which means there is an edge between vertex u and v. All edges are bidirectional and distinct.

    Next line contains an integer q (1 ≤ q ≤ 10^5), the number of queries Gildong wants to ask.

    Next q lines contain five integers x, y, a, b, and k each (1 ≤ x,y,a,b ≤ n, x ≠ y, 1 ≤ k ≤ 10^9) – the integers explained in the description. It is guaranteed that the edge between x and y does not exist in the original tree.

    Output

    For each query, print "YES" if there exists a path that contains exactly k edges from vertex a to b after adding an edge between vertices x and y. Otherwise, print "NO".

    You can print each letter in any case (upper or lower).

    Example

    Input

    5 1 2 2 3 3 4 4 5 5 1 3 1 2 2 1 4 1 3 2 1 4 1 3 3 4 2 3 3 9 5 2 3 3 9

    Output

    YES YES NO YES NO

    Note

    The image below describes the tree (circles and solid lines) and the added edges for each query (dotted lines).

    Possible paths for the queries with "YES" answers are:

    • 1-st query: 1 – 3 – 2
    • 2-nd query: 1 – 2 – 3
    • 4-th query: 3 – 4 – 2 – 3 – 4 – 2 – 3 – 4 – 2 – 3
  2. DeepSeek Assistant

    We need to solve a problem: given a tree (n up to 1e5, q up to 1e5). For each query, we add an extra edge (x,y) (bidirectional, not in the original tree). Then we need to determine if there exists a walk (path can repeat vertices and edges) from a to b with exactly k edges (i.e., length k). Walk allowed to repeat vertices/edges? The problem says: "A path can contain the same vertices and same edges multiple times." So it's a walk, not necessarily a simple path. So we are asked if there exists a walk from a to b of length exactly k in the graph consisting of original tree plus extra edge (x,y). The added edge is only for that query, then removed.

    We need to answer YES/NO.

    We can think about parity and distances. Since we can repeat edges, we can always "waste" time by going back and forth along an edge. In a tree (or any graph), the existence of a walk of length exactly k between two vertices depends on parity of k relative to the shortest path distance, and also whether there's any cycle to adjust parity. More precisely, in any graph, if there is any walk from a to b, then there exists a walk of length exactly k for any k >= d, where d is the shortest path distance, provided k and d have the same parity, if the graph is bipartite? Wait, let's recall:

    For a graph, the set of lengths of walks between two vertices is related to the adjacency matrix. In a bipartite graph, any walk between vertices in the same part must have even length; between opposite parts must have odd length. This is because edges always go from one part to the other. So parity constraint is tied to bipartiteness. Since the original tree is bipartite, and adding an edge that connects vertices in the same part introduces an odd cycle (makes graph non-bipartite). But even if graph remains bipartite (if edge connects opposite parts), parity constraint still holds: all walks between a and b must have parity equal to the parity of distance in bipartite sense (i.e., same parity as the distance mod 2). However, if graph becomes non-bipartite (i.e., contains an odd cycle), then parity constraint is relaxed: for any two vertices in the same connected component, there exist walks of both parities beyond some length? Actually, if the graph contains an odd cycle, then the graph is not bipartite; then for any two vertices in the same connected component, there exist walks of all sufficiently large lengths? Let's examine:

    Suppose we have a connected graph with at least one odd cycle. Then the set of lengths of walks from a to b is eventually all integers greater than or equal to some bound, and with parity condition maybe? Let's analyze:

    • The graph is connected. Let d = dist(a,b) (shortest path length). There exists a walk of length d.
    • If there exists any cycle of length c, we can incorporate that cycle into a walk, increasing length by c. So for any non-negative integer t, we have walks of length d + t*c. So if we have a cycle of even length, we can increase by even numbers only. But if we have an odd cycle, we can increase by odd increments. Actually, if we have both an even and odd cycle? But with one odd cycle, we can get both parity adjustments? Let's consider: If we have an odd cycle (length odd), then adding that cycle toggles parity (since odd changes parity). So starting from a walk of length d, we can achieve lengths d (mod 2) and d+odd (opposite parity). So we can achieve both parities for sufficiently large lengths. But is it always possible to achieve any length >= some threshold? The classical result: In a non-bipartite connected graph, the set of lengths of walks between two vertices is co-finite (all sufficiently large integers) if the graph is not bipartite? Actually, consider a graph that is just a triangle (3-cycle). Between two distinct vertices, the distances: shortest path length = 1. You can have walks of lengths: 1, 3, 5, ...? Let's list: from vertex A to B: direct edge length 1; A->B->A->B length 3; A->B->C->B length? That's A to B via C: A-C (edge) then C-B (edge) length 2? But that's a different path? Actually triangle: vertices A,B,C all connected. Walk from A to B:
    • length 1: A-B
    • length 2: A-C-B, A-B-A? But A-B-A ends at A, not B. So length 2: A-C-B (2 edges) works. So length 2 exists.
    • length 3: A-B-A-B (repeating edge) -> 3 edges; also A-B-C-B etc.
    • length 4: A-B-A-C-B? That's 4? Possibly. So actually all lengths >=1 exist? Check length 0? Not needed. So yes, for triangle, all positive lengths are possible. Another example: graph that is a tree plus one extra edge creating exactly one odd cycle, but still bipartiteness broken. Should be that for any two vertices, there exists a walk of any length >= some bound? Let's test with a simple graph: a path of length 2 (3 vertices: 1-2-3) plus an extra edge 1-3 (odd cycle? Actually triangle? That's exactly triangle). Already covered. What about a path of length 3 (4 vertices: 1-2-3-4) plus extra edge 1-3? That creates a cycle of length 3 (1-2-3-1) odd. So non-bipartite. Between vertices 1 and 4: shortest distance = 3 (1-2-3-4). Can we get length 4? Walk: 1-2-3-2-3-4? That's 5? Let's find: 1-2-3-4 length 3; 1-2-1? Wait extra edge 1-3? Actually edges: 1-2, 2-3, 3-4, and extra 1-3. Shortest path: 1-3-4 length 2? Because with extra edge, 1 to 3 is 1 edge, then 3 to 4 is 1 edge, so distance becomes 2. So new shortest path = 2 (even). So we have distances. But we want to see if we can achieve any length >=? Let's systematically compute reachable lengths between two vertices in a non-bipartite graph. Generally, in a connected non-bipartite graph, the set of walk lengths from a vertex to itself includes both even and odd numbers beyond some point (because you can take an odd cycle to flip parity). For two distinct vertices, it's a bit more nuanced, but still you can get all lengths >= some L. This is akin to the concept of "graph's adjacency matrix is primitive" for non-bipartite connected graphs? Actually, a connected non-bipartite graph is aperiodic (its greatest common divisor of cycle lengths is 1). This implies that for any two vertices, there exists some N0 such that for all n >= N0, there is a walk of length n. The period is gcd of lengths of cycles. If gcd = 1, then the graph is aperiodic, and the set of walk lengths is co-finite. Yes, that's a standard result: In a strongly connected aperiodic digraph, the number of walks of length n is positive for all sufficiently large n. For undirected graphs, it's similar. For two vertices in the same component, if the component is aperiodic (gcd of cycle lengths = 1), then there exists some threshold N such that for all n >= N, there exists a walk of length n between them. In a bipartite graph, the period is 2, so only lengths of a certain parity (equal to distance mod 2) are possible, but for sufficiently large lengths with that parity, there are walks (provided the component is not just a tree? Actually in a tree, there are no cycles, so the only walks are exactly those with length = distance + 2t for any t >= 0 because you can go back and forth along an edge, but no other cycles. So the set of lengths is {d + 2t: t >= 0} where d is the distance. So it's infinite but only one parity. For a bipartite graph with cycles, the set of lengths is also co-finite within that parity? Possibly, but since cycles are even, they add even numbers, so the parity remains fixed. So yes, it's distances mod 2 constant.

    Now, with added edge, the graph becomes either still bipartite (if the edge connects vertices of opposite colors in the original tree) or non-bipartite (if it connects same color). The original tree is bipartite; we can assign a bipartition (colors 0/1) based on tree (any root). The added edge connects vertices x and y. If color(x) != color(y), then the graph remains bipartite (since all cycles will have even length: tree path between x and y plus edge (x,y) -> path length L (distance in tree) plus 1 edge, but distance in tree between opposite colors is odd? Actually in a tree, distance between two vertices with same color is even, with opposite color is odd. Because bipartite: moving along an edge flips color; distance = number of edges. So if color(x) != color(y), then distance d_tree(x,y) is odd. Then adding edge (x,y) creates a cycle of length d_tree(x,y)+1, which is odd+1 = even. So cycle is even, graph remains bipartite. If color(x) == color(y), then d_tree(x,y) is even, plus edge -> cycle length even+1 = odd, so odd cycle, graph becomes non-bipartite, thus aperiodic (gcd of cycles = 1). So the parity constraint may be relaxed.

    Thus, for each query, we need to check if there exists a walk from a to b of exactly length k.

    We can compute distances in the original tree quickly using LCA (preprocess). Since n up to 1e5, q up to 1e5, we need O(log n) per query.

    Approach:

    Given original tree, preprocess LCA (binary lifting) to compute distance between any two nodes: dist(u,v) = depth[u] + depth[v] - 2*depth[lca(u,v)].

    Now with added edge (x,y), we have an extra edge. For a walk from a to b, we have multiple possibilities because we could use the added edge zero times, once, twice, etc. Since walk can repeat edges, we can incorporate the extra edge any number of times, but each usage adds some length: traveling from a to x (or y) then crossing the added edge, then from y (or x) to b, etc. Also we might use the added edge multiple times, possibly going back and forth.

    But rather than enumerating, we can think in terms of the graph's property: For a given graph (original tree + edge (x,y)), we want to know if there exists a walk of length exactly k between a and b.

    We can compute the shortest path distance between a and b in this new graph, denote d0 = shortest distance (with possibly using the new edge). Then, because we can add cycles, the possible lengths are d0 + 2t (if the graph is bipartite) or any length >= d0 (if non-bipartite) possibly with parity restrictions? Actually if the graph is non-bipartite, then for sufficiently large lengths, both parities are possible. But we need exact k, maybe small. So we need to check if k is at least some minimal achievable length, and if parity matches when bipartite. But also we could have longer paths by traversing cycles (like going back and forth along an edge, or going around cycles). In a tree (without extra edge), the possible walk lengths from a to b are exactly those that are >= dist(a,b) and have the same parity as dist(a,b). Because you can take the shortest path, then any number of "back-and-forth" moves along any edge (which adds 2 each time). So set = {d + 2t | t >= 0}.

    In the new graph with extra edge, there might be multiple cycles. But the key is: we can always waste by adding 2: take any edge and go back and forth. So if the graph is connected (it is), then for any walk length L that is achievable, L+2 is also achievable (by adding a back-and-forth on any edge). Therefore, the set of achievable lengths from a to b is either all numbers >= some minimal m that have same parity as m (if bipartite) or all numbers >= some m (if non-bipartite). Actually, with a non-bipartite graph, we can change parity by traversing an odd cycle once. So we can achieve both parities. But is it always that if the graph is non-bipartite, then there exists some integer L0 such that for all k >= L0, there is a walk? The classical result: for an aperiodic connected graph, the set of lengths of walks between any two vertices is co-finite (all sufficiently large integers). Additionally, the minimum length (the distance) is the shortest path length. So indeed, if graph is non-bipartite, then there exists some threshold T (maybe the diameter or something) such that for all k >= T, there is a walk of length k. However, we need to compute exactly for each query whether k is achievable. Since k up to 1e9, we cannot simulate. But we can determine based on parity and distance.

    But is the set exactly all k >= d0 if non-bipartite? Not necessarily for small k. For example, consider a graph that is a tree plus one edge creating an odd cycle. Could there be a gap? Suppose we have a path of length 2: vertices A-B-C, with extra edge A-C (making triangle). Distances: between A and B: shortest = 1 (A-B). Achievable lengths: can we get length 2? Yes: A-C-B (2 edges). Length 3: A-B-A-B (3). So all lengths >= 1. Between B and C: similar. Between A and C: shortest = 1 (A-C). Length 2: A-B-C (2). So all lengths >= 1. So no gap.

    Consider a more complex tree: a path of length 3: vertices 1-2-3-4, extra edge 1-3 (odd cycle). Distances: between 2 and 4: shortest? 2-3-4 =2, also 2-1-3-4 =3? Actually 2-1 edge exists? Yes 1-2 is original; 1-3 extra. So 2-1-3-4 =3. So shortest =2. Can we get length 3? Possibly 2-3-4-3? That ends at 4? 2-3-4 is length2; to get length3 ending at4: 2-3-2-3-4? That's length4. Let's systematically: Walk from 2 to 4. Options:

    • Use no extra edge: 2-3-4 length2.
    • Use extra edge: 2-1-3-4 length3.
    • Use extra edge twice? 2-1-3-1-3-4 length5? etc. So length3 is achievable. So all lengths >=2? Could length1 be achievable? No because distance >1. So minimal distance =2, and we can get 2,3,4,...? Check length4: 2-3-4-3-4? That's length4? That's 2-3-4 (2) then 4-3-4 (2 more) total 4, ends at 4? Actually 2-3-4-3-4: start at2, edges: 2-3 (1), 3-4 (2), 4-3 (3), 3-4 (4) ends at4. So yes. So all lengths >=2. So seems that as soon as we have an odd cycle, the set of achievable lengths from a to b is all k >= d0 (the shortest path distance). Is it always true? I suspect yes because we can always adjust parity by using the odd cycle if needed, and we can always add 2 by a back-and-forth. So the set becomes {k | k >= d0}. Let's confirm: For any k >= d0, we can construct a walk. Since we can waste 2's, the only issue is parity. If k and d0 have same parity, we can take shortest path and add (k-d0)/2 back-and-forth moves. If they have different parity, we need to change parity by incorporating an odd cycle. If we have an odd cycle, we can take shortest path modified to include the odd cycle somewhere, increasing length by an odd number. But we need to ensure we can increase by exactly 1 modulo 2 adjustments without overshooting beyond k? We need to show that we can achieve any length >= d0. Since we can add 2 arbitrarily, it suffices to show that we can achieve both d0 and d0+1 (i.e., one parity and the other). Then by adding 2, we can reach all numbers >= d0. So we need to check whether d0+1 is always achievable when graph is non-bipartite. But is d0+1 always achievable? Possibly not if d0 is already large? But we can always add an odd cycle to a path, increasing length by some odd number L_odd (at least 1). The smallest odd increase we can add to a shortest path? We could replace a segment of the shortest path with a detour that uses the odd cycle, increasing length by some odd amount. But is there always a way to increase by exactly 1? Not necessarily. For example, consider a graph that is a tree plus an extra edge that creates a triangle? That odd cycle length 3. Using that triangle, we can increase length by 2? Wait, if we go from a to b via the triangle, we might add length 2 (if we go around the triangle instead of direct edge)? Actually, consider two vertices a and b that are adjacent in the tree, and extra edge creates an odd cycle somewhere else. Can we achieve d0+1? d0 is maybe 1. We need a walk of length 2 (i.e., d0+1) between a and b. Is that always possible? Let's test with an example: Tree: path 1-2-3-4, extra edge 1-3 (odd cycle). Consider a=2, b=2 (same vertex). Shortest distance d0=0. Can we have walk of length 1 from 2 to 2? That would require a cycle of odd length? Actually, walk from a vertex to itself of length 1 would require a self-loop, not present. So maybe we need to consider a and b distinct. But the problem includes possibly a=b? Yes, queries can have a and b any vertices, possibly equal? The constraints say 1 ≤ a,b ≤ n, not necessarily distinct? It doesn't say a≠b. In example, there is query with a=b? Example queries: "4 2 3 3 9" a=3, b=3. So a and b can be the same. So we need to handle that. For a=b, d0=0. In a bipartite graph, only even lengths are possible (since any walk from a vertex to itself has even length because you must return to same color after even number of flips). In non-bipartite graph, odd lengths become possible as well (e.g., triangle: walk from A to A of length 3: A-B-A? That's length2? Actually A-B-A is length2 (even). A-B-C-A is length3? A-B-C-A: edges A-B, B-C, C-A: length3. So yes, odd lengths possible. So d0+1 =1? Can we have walk length 1 from a to itself? That would require a self-loop, not present. So for a=b, we cannot achieve length 1 if there is no self-loop. So for a=b, d0=0, but d0+1 may not be achievable even if graph is non-bipartite. However, we might achieve length 3,5,... but not 1. So the set of achievable lengths from a to a may be: 0,2,3,4,... maybe missing 1. Actually, in a non-bipartite connected graph with no self-loops, can we have odd-length closed walks? Yes, odd cycles give odd-length closed walks, but the smallest odd length might be 3 (if triangle) or larger odd cycle. So d0=0, and we can achieve 2 (by going back and forth along an edge), and 3 (by going around odd cycle), and then all numbers >= 2? Possibly 1 is missing. So the set might be all integers >= 2 except maybe some small numbers. But for our problem, k can be up to 1e9, so we need to check specific k.

    Thus we need a more systematic approach: For each query, we consider the graph G = tree + edge (x,y). Determine if there exists a walk of length exactly k between a and b.

    Because the graph is simple (no multiple edges initially, but plus an extra edge might create a parallel edge? Actually the extra edge is between x and y which originally not connected, so it's a new edge, so no parallel. So it's still simple.

    Given that the tree is sparse and the extra edge is just one, we can compute distances and also possible alternative routes using the extra edge.

    Observation: Any walk from a to b can be expressed as: take some (maybe zero) uses of the extra edge. Since we can repeat edges, we can use the extra edge multiple times, but each use adds at least 1 to length. However, we can treat the effect of using the extra edge as adding a "detour" that changes the length by some amount.

    Alternatively, we can think of the graph as having one extra edge. The shortest path distances between any two vertices can be computed in O(1) by considering whether using the extra edge yields a shorter path. Specifically, the distance d_new(a,b) = min( d(a,b), d(a,x)+1+d(y,b), d(a,y)+1+d(x,b) ). Because you can either not use the extra edge, or use it once in either direction. Could using it more than once lead to a shorter path? Not for the shortest distance, but for constructing walks of a given length, we may use the extra edge more than once, but if we use it multiple times, we would be adding cycles that increase length, not decrease. So the minimal distance is as above.

    Now, for existence of a walk of length k, we consider parity and the presence of odd cycle.

    General principle: In any connected graph, the set of lengths of walks from a to b is the set of integers k such that k >= d_min and k ≡ d_min (mod g) for some g? Actually, the set of lengths is eventually periodic with period equal to the gcd of lengths of all cycles in the graph (or something like that). More precisely, for a strongly connected directed graph, the set of lengths of walks from i to j is eventually all integers that are congruent to some residue modulo the period, where period is gcd of lengths of cycles. For undirected graphs, similar. For a connected undirected graph, the period for a pair (a,b) is the gcd of lengths of all closed walks starting and ending at a? There is a known concept: In a graph, the set of lengths of walks from u to v is eventually periodic with period 2? Not exactly. The correct statement: For an undirected graph, the adjacency matrix is symmetric, and the graph is bipartite iff all eigenvalues are symmetric? Actually, we can reason combinatorially.

    Better: For any two vertices in a connected graph, there exists some integer L0 such that for all k >= L0 with k ≡ d_min (mod 2?) if bipartite? Or if graph is non-bipartite, then for all sufficiently large k, there exists a walk. But we need exact condition for each query for arbitrary k up to 1e9. However, since we have only one extra edge, we might be able to characterize achievable lengths precisely by a small set of possible distances using 0,1,2 uses of extra edge? Because repeated uses of extra edge can be "absorbed" into parity and length adjustments. Let's analyze more concretely.

    Let G be tree T plus extra edge e between x and y.

    We need to check if there is a walk of length k from a to b.

    Because T is a tree, any walk in G can be seen as a walk in T with possible traversals of e. Since e is the only cycle-creating edge, any walk can be decomposed as: start at a, walk in T to some vertex, cross e, walk in T, cross e again, ..., eventually end at b. So the walk consists of segments in T (paths) between occurrences of e crossings. However, since T is a tree, the path between two vertices is unique. So any segment that stays within T corresponds to the unique simple path between its endpoints. Thus the total length of the walk is sum of lengths of those tree path segments plus number of e-crossings (each crossing counts as 1). Also, we may traverse tree edges multiple times, but the unique path property implies that the minimal length for traveling between two vertices in T is the tree distance, but we could also wander around in T (by going back and forth) to increase length arbitrarily by multiples of 2 (since going away and back along an edge adds 2). Indeed, in a tree, any walk between u and v can be expressed as the unique simple path from u to v plus some even-length detours (back-and-forth along edges). This is because any walk in a tree, if you remove backtracks, collapses to the unique simple path. The total length = distance(u,v) + 2 * (some non-negative integer). Because any extra wandering adds an even number (since you have to return along the same edges). So in T alone, the set of possible walk lengths from u to v is { d(u,v) + 2t | t >= 0 }.

    Now with e, we have an additional edge. A walk can use e zero or multiple times. Each use of e adds 1 to length (the edge itself). Between uses of e, we have walks within T (possibly with extra detours). So the walk can be represented as:

    a = v0 -> (walk in T) -> w1 (either x or y) -> cross e -> w2 (the other endpoint) -> (walk in T) -> w3 (maybe x or y) -> cross e -> ... -> b.

    The segments between e-crossings are walks in T between:

    • a and first endpoint,
    • last endpoint and b,
    • between consecutive endpoints (after crossing, you are at the opposite endpoint, then you might walk in T to some vertex then cross again; but if you cross consecutively, you could go from one endpoint to the same endpoint? Actually crossing e twice in a row: from x, cross to y, then immediately cross back to x? But that would be x -> y (cross) then y -> x (cross) resulting in a loop of length 2, but you could also incorporate tree walks between crossings. However, you can also use e multiple times in a row without tree segments: e.g., x-y-x-y-... but that would just be alternating. That corresponds to segments of zero-length tree walks (i.e., staying at the endpoint). But walking from y to x can be done either by crossing e (length 1) or by taking the tree path between y and x (length d(y,x)). The tree path might be longer. So we have flexibility.

    But the key: Because we can always add even-length detours in T (by back-and-forth), any segment's length can be increased by multiples of 2. Also, we can add cycles using e: For example, if we go from x to y via e (1) then back to x via tree (distance d(x,y)) we get a cycle of length d(x,y)+1. That's odd or even depending on d(x,y) parity. Alternatively, we can go x -> y via tree (d) then back to x via e (1) to get same cycle. So the graph contains a cycle of length d(x,y)+1. That's the only simple cycle (apart from combinations). Also, we can create longer cycles by combining.

    Now, the existence of a walk of length k can be decided by checking if k can be expressed as some combination of distances plus 2t. More systematically, we can consider three "shortest path" distances using the extra edge at most once? But repeated uses can be reduced modulo 2 because they add cycles of length L = d(x,y)+1. Since you can go from x to y via the tree and back via the extra edge (or vice versa) to form a closed walk at x (or y) of length (d(x,y) + 1). Actually, going from x to y via tree (distance d) and back via extra edge (1) gives a closed walk at x of length d+1. Similarly, going from x to y via extra edge (1) and back via tree (d) also gives length d+1. So there is a cycle (starting and ending at x) of length d+1, which is odd if d even, even if d odd. Additionally, we have the ability to add 2 anywhere by back-and-forth on any edge.

    Thus, the set of possible walk lengths from a to b is essentially: { d0 + 2p + m*(d(x,y)+1) | p >=0, m >=0 }? Not exactly, because you can incorporate the cycle in more complex ways, but any use of the extra edge can be thought of as adding the cycle length to the path, possibly with modifications.

    We need a precise condition.

    Let's define:

    Let d(u,v) denote tree distance.

    Let extra edge between x and y, length 1.

    Consider any walk from a to b. The walk is in a graph that has tree edges and one extra edge. The walk can be "projected" onto the tree by replacing each traversal of the extra edge by a virtual step; but perhaps we can think in terms of parity and distances.

    Alternate approach: Use graph theory concepts: For any two vertices in a connected graph, the set of lengths of walks between them is exactly the set of integers k such that k >= some L and k ≡ d_min (mod g) where g is the gcd of lengths of all cycles in the graph? But need to be careful.

    In any connected graph, define the set S_{a,b} = { lengths of walks from a to b }. There is known result: There exists some integer N such that for all k >= N, k ∈ S_{a,b} if and only if k ≡ r (mod g) where g is the greatest common divisor of lengths of all cycles? Actually, for a strongly connected directed graph, the set of lengths of walks from i to j is eventually periodic with period equal to the period of the graph (gcd of lengths of cycles). For undirected graphs, the graph is strongly connected as undirected (if connected). The period for a vertex is the gcd of lengths of all closed walks starting and ending at that vertex. For an undirected graph, this period is either 1 or 2. Actually, consider a bipartite graph: all cycles are even, so gcd of cycle lengths is at least 2 (could be 2 or higher multiple). But is it exactly 2? For a bipartite graph, any closed walk has even length, so the set of possible lengths of closed walks from a vertex to itself are multiples of 2? But could also be multiples of larger numbers? If the graph is a tree (no cycles), then there are no closed walks? Actually, in a tree, there are cycles? There are no cycles, but you can have closed walks that repeat edges: e.g., go from a to neighbor and back: length 2. So closed walks exist, and they are all even? In a tree, any closed walk must have even length because it's bipartite and you must return to same color, so length is even. So the gcd of all closed walk lengths from a vertex could be 2? But consider a tree with a vertex of degree >1: you can have closed walk: a-b-a (length 2), a-c-a (2), also a-b-a-b-a (4). So gcd of {2,4,...} is 2. So period = 2. For a non-bipartite graph, there exists an odd cycle, so gcd of cycle lengths is 1 (since odd and even? Actually if there is an odd cycle, say length 3, then gcd(2,3) = 1, so period becomes 1. Indeed, period = 1 for non-bipartite connected graphs. So the period (gcd of all cycle lengths) is 1 if graph has an odd cycle, else 2 if bipartite (assuming graph has at least one edge). This matches the parity property.

    But is the set of walk lengths exactly those numbers >= some threshold that are congruent to d_min mod period? Not exactly; there may be small numbers missing even if parity matches. For example, in a tree (period 2), d_min = distance between a and b. For a=leaf, b=leaf far away, you can achieve d_min + 2t for any t>=0, but you cannot achieve d_min+2 for t=1? Actually you can: d_min+2 is achievable by going to a neighbor and back then go shortest path. So yes, all numbers with same parity and >= d_min are achievable in a tree? Let's test with a simple tree: two vertices connected by one edge. a=1, b=2. d_min=1. Achievable lengths: 1, 3, 5, ...? Can we get 3? 1-2-1-2 (length 3) yes. So set = odd numbers >=1. That's d_min + 2t. So all numbers with that parity and >= d_min. For a=1, b=1: d_min=0, achievable lengths: 0,2,4,... (even). So set = even numbers >=0. So yes, all numbers with parity matching d_min and >= d_min are achievable in a tree. In a tree, there is no other restriction because you can always add 2 by going back and forth on any edge. So the threshold is exactly d_min.

    Now, what about a graph that is tree plus an extra edge that makes it non-bipartite? Then period becomes 1. The set of walk lengths from a to b should be all integers >= some L_min? Possibly L_min = d_min or maybe d_min+something? In many graphs, it's known that for a connected non-bipartite graph, there exists for any two vertices a walk of any length >= some N (maybe the diameter). However, is it always that N = d_min? Let's test edge cases.

    Consider a graph that is a triangle (3-cycle). That's not a tree plus edge but it's a cycle of length 3. For a=b (same vertex), d_min = 0. Achievable lengths: 0, 2, 3, 4, 5, ...? Can we get 1? No. So N=2? Because 1 is not achievable. For a and b distinct, say vertices 1 and 2: d_min = 1. Achievable lengths: 1,2,3,4,...? Check length 2: 1-3-2 (exists). So all >=1. So N = d_min for distinct vertices. For a=b, N=2 (or maybe 0 is achievable). So the threshold can be higher than d_min when a=b? But in a tree (bipartite), for a=b, d_min=0, achievable lengths: even numbers >=0, so missing odd numbers. So in non-bipartite, we get odd numbers also, but not necessarily all odd numbers from the start? For a=b, we may need at least 3 to get an odd length? Let's examine triangle: a=b=1. Walk lengths: 0 (stay), 2: 1-2-1, 3: 1-2-3-1, 4: 1-2-1-2-1 (or 1-2-3-1-2-1?) Actually 4 can be done: 1-2-1-2-1 (1-2-1-2-1: edges: 1-2,2-1,1-2,2-1 => that's 4? Wait count: 1-2 (1), 2-1 (2), 1-2 (3), 2-1 (4) ends at 1, so length 4. Also 5: 1-2-3-1-2-1? That's 5. So odd lengths start at 3. So set is {0} ∪ {2,3,4,5,...}? Actually 1 is missing. So N = 2? But 2 is even. The smallest odd is 3. So all integers >= 2 are achievable, except maybe 1? So threshold = 2.

    Now consider a graph that is a tree plus an extra edge that creates an odd cycle but the cycle length is >3? For example, consider a path of 5 vertices: 1-2-3-4-5, add edge between 1 and 4. Distance between 1 and 4 in tree = 3 (odd? Actually 1-2-3-4: length 3, odd). Wait 1 and 4: colors? Suppose root at 1 color 0, then 2 color1,3 color0,4 color1, so colors differ => d=3 odd, so extra edge connects opposite colors => graph remains bipartite? We need odd cycle, so need edge connecting same color => d even. So choose edge connecting 1 and 3 (d=2 even) -> cycle length 3? Actually 1-2-3 length 2, plus edge 1-3 gives cycle length 3 (odd). So consider tree: 1-2-3-4-5, extra edge 1-3. Graph: vertices:1,2,3,4,5 with edges:1-2,2-3,3-4,4-5, and 1-3.

    Now consider a=b=1. d_min=0. Achievable lengths? In this graph, we have odd cycle (1-2-3-1) length 3. Also we have even cycles? Not directly. We can go from 1 to 1 via various walks. We want to see if we can achieve length 1? No self-loop. Length 2? 1-2-1 (using edge 1-2 twice? Actually 1-2-1: 1-2 (1), 2-1 (2) => yes, length 2. Length 3? 1-2-3-1 (1-2,2-3,3-1) length 3. So we have 0,2,3,... length 1 missing. So threshold for all integers >=2 is okay. So again N=2.

    What about a=b and graph that is just a tree (bipartite)? Achievable lengths are even numbers >=0, so threshold for all even numbers is 0, but odd numbers never achievable. So in bipartite case, we have parity restriction.

    Now consider a and b distinct in non-bipartite graph. Could there be a gap where some length between d_min and something is missing? For example, in the path with extra edge 1-3, consider a=2, b=4. Compute distances: shortest paths: 2-3-4 =2; 2-1-3-4 =3 (via extra edge). So d_min=2. Can we achieve length 3? Yes (2-1-3-4). Length 4? 2-3-4-3-4? That's 4? 2-3 (1),3-4 (2),4-3 (3),3-4 (4) ends at 4 => yes. So all >=2.

    Consider a=2, b=5: d_min? 2-3-4-5 =3; alternative 2-1-3-4-5 =4; so d_min=3. Can we get length 4? 2-1-3-4-5 =4. length 5? 2-3-2-3-4-5? Possibly: 2-3 (1),3-2 (2),2-3 (3),3-4 (4),4-5 (5) => yes. So all >=3.

    Thus seems that for distinct vertices, d_min itself is achievable (by definition). And d_min+1 is often achievable if there is an odd cycle accessible? But is it always achievable? Consider a graph that is a tree plus extra edge that creates an odd cycle but the odd cycle might be far from a and b, making it hard to get parity change without adding too much length. However, we can always incorporate the odd cycle somewhere along the path. The minimal increase to change parity would be to include the odd cycle detour somewhere, but the detour might increase length by an odd amount that is at least some minimum odd number (maybe 1, but we can't increase by exactly 1 because the odd cycle length might be 3 or more, but we can also use combinations of the cycle and back-and-forth to adjust by 1 modulo 2, but absolute increase might be larger than 1. However, we can then add back-and-forth (2) to fill up to any larger number. So to achieve d_min+1, we need to find a walk whose length is d_min+1. This is equivalent to checking if there exists a walk of length d_min+1. That's not guaranteed if the smallest odd increase is >1. For example, suppose the only odd cycle has length 5, and we want to increase length by 1 from d_min. Could we combine with other even cycles to get total increase 1? Since even cycles add even numbers, the parity change is determined by odd cycles. The smallest odd increase we can achieve is the length of the odd cycle? But we can also use the odd cycle multiple times, e.g., 5, 10, etc. All odd multiples of 5? Actually, using an odd cycle adds an odd number (like 5). Using it twice adds 10 (even). So the set of possible increments from a base path (shortest) by adding cycles (including back-and-forth edges) is the set of non-negative integer combinations of 2 (from back-and-forth) and the odd cycle length (say L_odd). This set eventually includes all numbers beyond some Frobenius coin problem bound if gcd(2, L_odd)=1 (since gcd(2, odd) = 1). Indeed, since 2 and an odd number are coprime, the semigroup generated by 2 and L_odd contains all integers >= some Frobenius number. The Frobenius number for two coprime positive integers a and b is ab - a - b. So with a=2, b=L_odd (odd >=3), the largest integer not representable as non-negative combination is 2L_odd - 2 - L_odd = L_odd - 2. So all integers >= L_odd - 1 can be expressed as 2x + L_oddy. For L_odd=3, largest not representable is 1? Actually 23-2-3=6-5=1, so numbers >=2 are representable. For L_odd=5, largest not representable is 5-2=3? Compute: 25 - 2 - 5 = 10 - 7 = 3. So numbers >=4 are representable. So for L_odd=5, numbers 1,2,3 may not be representable? Check: 1 =? no; 2 = 2 (yes using one 2); 3 =? cannot (since 2*? 2+? 1? no); So 3 is not representable. So if the minimal odd cycle length is 5, we can increase by 2 (even) arbitrarily, and by 5 (odd). So we can achieve increments: 0,2,4,... (evens); 5,7,9,... (odds >=5). Also 1,3 are not directly achievable as pure increments, but we might achieve d_min+1 by other routes not just shortest path plus cycles; maybe there exists a different path of length d_min+1 that is not shortest plus cycles? That path may incorporate the odd cycle in a different way, perhaps with a different base distance.

    In our graph, we have not only the odd cycle but also the ability to use the extra edge multiple times and tree detours. The possible lengths of walks from a to b form the set of numbers that can be expressed as distances of walks that may use the extra edge any number of times. Instead of thinking in terms of adding cycles to the shortest path, we can consider the graph distances with 0,1,2 uses of the extra edge, but also multiple uses may produce other lengths.

    Because the graph is small (only one extra edge), we can perhaps characterize all possible walk lengths as: k is achievable if and only if k >= some lower bound and satisfies some parity condition modulo 2 or modulo something, where the lower bound is something like the minimum distance with parity constraints. Since we can always add 2, the condition reduces to checking if k has the same parity as some achievable distance not exceeding k, or if the graph is non-bipartite, then any sufficiently large k works, but we need to handle small k.

    Given constraints q up to 1e5, we need a fast check per query. So we need to compute something like: the set of possible distances (mod something) between a and b in this graph.

    Observation: Since we can add any number of 2's, the achievable lengths are exactly those numbers that are >= some minimal achievable length and have the same parity as some achievable length (if graph bipartite) OR all numbers >= some threshold (if non-bipartite). But the minimal achievable length might be less than d_min? d_min is the shortest path distance, so that's the minimum possible length of any walk (since length cannot be less than distance). So lower bound is d_min.

    So for bipartite case (extra edge connects opposite colors), the graph remains bipartite. So all walks from a to b must have parity equal to parity of distance in bipartite graph. Since it's bipartite, the parity of any walk is fixed: it must be same as color difference. In a bipartite graph, any walk between a and b has length parity equal to (color(a) XOR color(b)). Because each edge changes color. So length mod 2 must equal (color(a) XOR color(b)). Note that this parity is the same as d(a,b) mod 2 in the original tree, and also same as d_new(a,b) mod 2? d_new may be shorter but parity still same because graph is bipartite. Actually, in a bipartite graph, any path length parity is fixed by bipartition. So condition: k mod 2 must equal (color(a) XOR color(b)). Additionally, we need k >= d_new(a,b) because we can't go shorter than the shortest distance. But also, is any k >= d_new with correct parity achievable? We need to ensure that we can always extend a walk by 2. Since we can always add a back-and-forth on any edge (the graph still has edges), we can increase length by 2 arbitrarily. Starting from a walk of length L (which is >= d_new and with correct parity), we can get L+2, L+4, etc. So the set is { L : L >= d_new and L ≡ parity (mod 2) } if we can achieve at least one L of each parity? But there is only one parity allowed. So we need to know: what is the smallest L >= d_new with that parity? That's either d_new if d_new has the correct parity, or maybe d_new+1? But d_new is the minimum possible length, so if d_new has the correct parity, then d_new works. If d_new has wrong parity, then the shortest walk might be longer than d_new? In a bipartite graph, any walk length parity is fixed. So if the shortest path distance d_new has wrong parity, that cannot happen because in a bipartite graph, any path length between a and b must have parity equal to the bipartite difference. The distance d_new is the length of some path (the shortest path), so it must automatically satisfy that parity. So d_new always has parity equal to color(a) XOR color(b). So in bipartite case, d_new itself satisfies parity. Therefore, for any k >= d_new with same parity, we can achieve it: start with shortest path (length d_new) and add (k - d_new)/2 back-and-forth loops. So condition: k >= d_new and (k mod 2) == (color(a) XOR color(b)). That's for bipartite case.

    Now for non-bipartite case (extra edge connects same color, creating odd cycle). Then the graph is non-bipartite. In such a graph, the set of achievable walk lengths from a to b is all integers >= some threshold L0, where L0 might be something like d_new or maybe d_new+1? But we need to determine L0 exactly.

    We need to answer queries quickly. So for non-bipartite case, we must compute the minimal k that is achievable? And then check if k >= that minimal and (maybe no parity condition). However, as argued, if the graph is non-bipartite, for any two vertices, there is a walk of length k for all sufficiently large k. But we need exact for any k up to 1e9, including small ones. So we need to compute the minimal achievable lengths and maybe also the next few values to see if there is a gap.

    In many problems with similar setting (like Codeforces problem 1304E? Actually this is Codeforces problem "1-Trees and Queries" maybe? I recall a problem: "1-Trees and Queries" from Codeforces Round #620? Yes, I think it's Codeforces problem 1304E - 1-Trees and Queries. The solution is to check three candidate path lengths (without extra edge, using extra edge once in each direction) and see if k is >= that candidate and parity matches. Wait, I recall a known problem: Given a tree, queries add an extra edge and ask if there is a path of exactly length k between a and b. The solution was to compute distances and then consider three possibilities: a->b directly, a->x->y->b, a->y->x->b. For each candidate distance L, if k >= L and (k-L) is even, then answer YES. Because you can add cycles of length 2 by traversing any edge back and forth. This is exactly what is done for that problem. I think I've seen this before. Let's verify: In Codeforces 1304E, the problem statement: "Gildong was hiking a mountain, ..." Yes it's exactly that problem. The solution is as described: for each query, compute distances in the tree: d(a,b), d(a,x)+1+d(y,b), d(a,y)+1+d(x,b). Let these be L1, L2, L3. Then if there exists Li such that Li <= k and (k - Li) is even, answer YES, else NO.

    But is that solution correct? Let's test with the given example. Query 1: x=1,y=3,a=1,b=2,k=2. Distances: d(1,2)=1? Actually tree: 1-2-3-4-5, so d(1,2)=1, L1=1; L2: a->x? a=1, x=1, so d(1,1)=0 +1+ d(y=3,b=2)= d(3,2)=1 => total 2; L3: d(1,y=3)=2 +1+ d(x=1,b=2)=1 => total 4. So candidates: 1,2,4. k=2: L2=2 exactly, parity diff 0 even -> YES. Output YES. Query2: 1 4 1 3 2. d(1,3)=2; L2: d(1,1)=0+1+d(4,3)=1 =>2; L3: d(1,4)=3+1+d(1,3)=2 =>6. Candidates:2,2,6. k=2 matches L1 or L2, diff 0 -> YES. Query3: 1 4 1 3 3. k=3, candidates 2,2,6. For L=2, k-L=1 odd, not allowed. For L=6, k<6. So NO. Output NO. Query4: 4 2 3 3 9. x=4,y=2,a=3,b=3,k=9. Tree: d(3,3)=0; L2: d(3,4)=1 +1+ d(2,3)=1 => 3; L3: d(3,2)=1 +1+ d(4,3)=1 =>3. Candidates:0,3,3. Check k=9: For L=0, 9-0=9 odd? Actually need even? 9-0=9 odd -> not allowed. For L=3, 9-3=6 even -> YES. Output YES. Query5: 5 2 3 3 9. x=5,y=2,a=3,b=3,k=9. Distances: d(3,3)=0; L2: d(3,5)=2+1+d(2,3)=1 =>4; L3: d(3,2)=1+1+d(5,3)=2 =>4. Candidates:0,4,4. k=9: 9-0=9 odd; 9-4=5 odd -> NO. Output NO.

    So the known solution matches the sample. So indeed the solution is: compute three distances: d1 = dist(a,b) (without using extra edge), d2 = dist(a,x) + 1 + dist(y,b), d3 = dist(a,y) + 1 + dist(x,b). If any of these is <= k and (k - that distance) is even, answer YES, else NO.

    But why is this sufficient? And why only these three? Because using the extra edge more than once would produce longer paths, but those longer paths can be reduced by subtracting 2's? Actually, any walk from a to b can be simplified: The extra edge might be used multiple times, but you can always eliminate pairs of traversals of the extra edge that cancel out? But maybe it's because any walk can be adjusted to use the extra edge at most once while preserving parity of length modulo 2? Let's reason.

    The graph is tree + one extra edge. Consider any walk from a to b. If the walk uses the extra edge multiple times, we can think of it as a walk in the tree with some "detours" via the extra edge. Since the tree is acyclic, each time we use the extra edge, we essentially add a cycle (the unique cycle formed by the extra edge and the tree path between its endpoints). Using the extra edge twice (i.e., go from x to y via extra edge, then later from y to x via extra edge) could be replaced by some tree path? Actually, going from x to y via extra edge (length 1) then later from y to x via extra edge (another 1) gives total 2, but could also be done by walking from x to y via tree (distance d(x,y)) and then back via tree? That would be longer. However, using extra edge multiple times might be necessary to achieve certain lengths? But the known solution suggests that it's sufficient to consider using the extra edge 0 or 1 times. Because using it more times will only increase length, and you can always adjust by adding 2-loops elsewhere.

    Let's attempt to prove: For any walk from a to b, we can transform it into a walk that uses the extra edge at most once, without increasing its length? Not exactly; we need to check parity constraints. The idea is: The only "cycle" that changes parity is the odd cycle (if exists). But we already account for that by considering one use. If we use the extra edge twice, the net effect is like adding an even-length cycle (since 2 edges plus possibly some tree paths between the two uses). Actually, using the extra edge twice could be replaced by a tree-only walk that might be longer or shorter? But we don't need to replace; we need to see if for a given k, existence of any walk implies existence of a walk with at most one use of the extra edge that has length <= k and same parity as k (or difference even). More formally, the set of achievable lengths is exactly the set of numbers that are >= some candidate distance among the three and have same parity (mod 2) as that candidate.

    Because we can always increase length by 2 (by taking a detour along any edge: go forth and back). So if there is any walk of length L, then for any L' >= L with L' ≡ L (mod 2), there exists a walk of length L'. Therefore, the condition for existence of a walk of length k is equivalent to: there exists some L in the set of lengths achievable with some "simple" pattern (like using extra edge 0 or 1 times) such that L <= k and L ≡ k (mod 2). Because you can pad with 2-steps.

    Thus, we need to characterize the set S of possible lengths of walks that are "simple" in the sense that they don't contain unnecessary detours. Actually, the minimal lengths achievable are those from using the extra edge 0 or 1 times (maybe also using it twice but in a way that yields a shorter length than these? Using extra edge twice cannot be shorter than using it once because it adds at least 2, but maybe using it twice could yield a path with different parity than the 0/1 options, and could be shorter than some other option? Let's consider: The graph might be non-bipartite (extra edge connects same color). In that case, the 0-use path (tree distance) has some parity p (equal to color difference). The 1-use paths (a->x->y->b and a->y->x->b) have lengths: d(a,x)+1+d(y,b) and d(a,y)+1+d(x,b). Their parities: Since d(a,x) and d(y,b) each have parity determined by colors. Since x and y have same color (non-bipartite case), then color(x)=color(y). So parity of d(a,x)+1+d(y,b) = (color(a) XOR color(x)) +1+ (color(y) XOR color(b)) = (color(a) XOR color(x)) +1+ (color(x) XOR color(b)) because color(y)=color(x). Compute mod2: (c_a XOR c_x) + (c_x XOR c_b) = c_a XOR c_b (since c_x cancels out). Then plus 1 gives opposite parity to c_a XOR c_b. So the 1-use path length parity is opposite to the 0-use path. So in non-bipartite case, we have two distances with opposite parities (if both are considered). Actually, both 1-use paths have same parity because they are symmetric: d(a,x)+1+d(y,b) and d(a,y)+1+d(x,b) have same parity? Let's check: d(a,y) parity = (c_a XOR c_y) = (c_a XOR c_x) (since c_y=c_x), d(x,b) parity = (c_x XOR c_b). So sum parity = (c_a XOR c_x) + 1 + (c_x XOR c_b) = (c_a XOR c_b) + 1 mod2, same as before. So both give opposite parity to tree distance. So in non-bipartite case, we have at least one distance of each parity among the three candidates? Actually we have tree distance (parity p) and the two 1-use distances (parity 1-p). So we have both parities available. So then for any k >= min(L_i), we can choose the candidate with parity matching k (since we have both parities), and then add 2's to reach exactly k, provided that candidate <= k. But is it always true that the candidate with the required parity is <= k? Not necessarily; it could be larger than k. However, if both candidates (with each parity) are > k, then maybe we can still achieve k using multiple uses of the extra edge to get a length shorter than those candidates? That seems impossible because using extra edge more than once will increase length further. For example, consider using extra edge twice: a -> ... -> x -> y (extra) -> ... -> y -> x (extra) -> ... -> b. This includes at least two traversals of extra edge (2) plus some tree paths. The total length would be at least d(a,x) + 1 + d(y,x)?? Actually careful: The simplest double use: a -> x (tree) -> y (extra) -> x (tree? maybe via tree) -> y (extra) -> b? That's messy. But it's likely longer than using extra edge once or zero times. Could it be shorter than one of the 1-use candidates? Possibly if the 1-use candidate is very long, but double use might be shorter? Let's try to find an example: Suppose tree is a long path, and x and y are far apart, then d(a,x) and d(y,b) could be large. But using extra edge twice might allow a different route that bypasses some long segments? For instance, a and b are near each other, but x and y are far. Using extra edge zero gives small distance. Using extra edge once might be large because you have to go to x and from y to b. Using extra edge twice: a -> ... -> x -> y (extra) -> ... -> y -> x (extra) -> ... -> b. That essentially goes from a to x, then across to y, then back to x, then across to y, then to b? That seems longer. But maybe there is a configuration where using the extra edge twice yields a path that is shorter than using it once? Since the extra edge is a direct connection, using it twice essentially means you go from a to one endpoint, cross, go somewhere, cross back, then go to b. This could be seen as: a to x (d1), then x-y (1), then some path from y to x (which could be the tree distance d(x,y)), then x-y (1), then y to b (d2). So total = d(a,x)+1+d(x,y)+1+d(y,b) = d(a,x)+d(x,y)+d(y,b)+2. That is essentially going from a to x, then tree path x to y, then extra edge y to x? Wait careful: In double use, you could do: a -> (tree) -> x -> (extra) -> y -> (tree) -> x -> (extra) -> y -> (tree) -> b. That's d(a,x) +1 + d(y,x) +1 + d(y,b). But d(y,x) = d(x,y). So total = d(a,x) + d(x,y) + d(y,b) + 2. Alternatively, you could do a -> y -> x -> b, etc. Another pattern: a -> x -> (extra) -> y -> (tree) -> x -> (extra) -> y -> b? That would be d(a,x) +1 + d(y,x) +1 + d(y,b) same. Or a -> x -> (extra) -> y -> (tree) -> y? Actually you need to end at b. More generally, using the extra edge an even number of times, you could net effect be that you start at one endpoint and end at the same endpoint after even crosses? But can you get a total length less than min(d(a,b), d(a,x)+1+d(y,b), d(a,y)+1+d(x,b))? Intuitively not, because any use of extra edge adds at least 1 and forces you to go to its endpoints. However, consider using extra edge twice might allow you to use a shorter tree path than the direct a-b? For example, suppose a and b are both near the middle of the path between x and y. The direct tree distance a-b might be long because they are on opposite sides? Actually, tree distance is unique. Let's attempt to construct a counterexample: Suppose tree is a path: vertices 1-2-3-4-5-6. Add extra edge between 2 and 5. So x=2, y=5. d(2,5)=3 (2-3-4-5). Now consider a=3, b=4. Direct distance d(3,4)=1. Using extra edge once: a->x->y->b: d(3,2)=1 +1+ d(5,4)=1 => total 3; a->y->x->b: d(3,5)=2+1+d(2,4)=2 => total 5. So best candidate is min(1,3,5)=1. So zero use is best.

    What about a=2,b=5? Direct distance d(2,5)=3; using extra edge once: 2->2? Actually a=x, so d(a,x)=0+1+d(y,b)=d(5,5)=0 =>1? Wait compute: d(2,2)=0, +1 + d(5,5)=0 => total 1. That's using extra edge directly: 2-5 via extra edge length 1. So best candidate =1. So zero use not best. So 1-use gives 1.

    Now can using extra edge twice give a length less than 1? No, because length must be positive.

    So it seems the minimal possible distance between a and b in the new graph is indeed min( d(a,b), d(a,x)+1+d(y,b), d(a,y)+1+d(x,b) ). Using extra edge more than once can only increase the length beyond that minimum, because each extra usage adds at least 1 and also forces additional traversal of tree paths. However, could using extra edge twice lead to a distance that is less than the 1-use distances but greater than direct? Possibly if the 1-use distances are large, but double-use might be smaller? Let's try to find a scenario where d(a,b) is large, but a to x and y to b are also large, but maybe a to x is small, y to b is small, but x to y is huge, so d(a,x)+1+d(y,b) is small? That's the 1-use candidate. Double-use would be larger because it adds d(x,y)+1 extra. So it's larger. What about using extra edge an odd number >1? E.g., 3 times: a -> x -> y -> x -> y -> b. That would be d(a,x) +1 + d(y,x) +1 + d(x,y) +1 + d(y,b) = d(a,x) + 3 + 2*d(x,y) + d(y,b). That's even larger. So minimal distances are achieved with at most one use. So for the minimal length L_min, we only need to consider 0 or 1 use. That's standard: the shortest path in a graph with one extra edge is min of those three.

    Now for existence of a walk of exactly length k, we care about any length, not just minimal. Since we can add 2-cycles (back-and-forth on any edge), we can increase length in increments of 2 arbitrarily. So if we have a walk of length L, we can achieve L+2t for any t>=0. Thus the set of achievable lengths is the union over all possible "base lengths" L (which could be from various numbers of extra edge uses) of the arithmetic progressions L mod 2 with step 2, starting at L. But we can also combine with odd cycles to change parity. The key is that using the extra edge an odd number of times flips parity relative to tree distance, while even number of times preserves parity (since each extra edge use adds 1, so odd number toggles parity). Also, using the extra edge multiple times adds at least some extra length beyond the minimal for that parity.

    But can using extra edge more than once give a base length that is smaller than the minimal base length for a given parity? Let's denote P0 = set of lengths achievable with 0 use (just tree paths, but we can also incorporate back-and-forth, but base we consider simple paths? Actually the minimal length for a given "pattern" (like using extra edge exactly t times) is some value. But we can also add even cycles to any base length. So for parity p, the set of achievable lengths of parity p is all numbers >= L_min_p that are congruent to p mod 2, where L_min_p is the minimum length among walks that have parity p. Because if we have a walk of length L with parity p, we can add 2 to get L+2, L+4, etc. So the smallest number with parity p that is achievable is L_min_p, and then all larger numbers with same parity are achievable. So the condition for existence of a walk of length k is: k >= L_min_{k mod 2} and (k mod 2) matches parity p (but that's automatic if we consider L_min for that parity). In other words, we need to