Skip to content
TheChatArchiveThe Chat Archive
GLMGLM-5 / Pony Alpha· unknownHugging Face Frontier Reasoning Traces

Prove that every bounded sequence has a convergent subsequence (Bolzano-Weierstrass…

  1. User

    Prove that every bounded sequence has a convergent subsequence (Bolzano-Weierstrass theorem).

  2. GLM Assistant

    The user wants a proof of the Bolzano-Weierstrass theorem for sequences.

    Theorem Statement: Every bounded sequence in R\mathbb{R} has a convergent subsequence.

    Proof Approaches: There are a few standard ways to prove this.

    1. Bisection Method (Nested Intervals): This is the classic, constructive approach. Start with an interval containing the sequence. Since there are infinitely many points (or rather, infinite terms of the sequence, though the values might repeat), split the interval in half. At least one half must contain infinitely many terms. Pick that half, pick a term in it, repeat. This gives a Cauchy subsequence (and thus convergent in R\mathbb{R}).
    2. Peak/Bottom Argument (Lemma of Rising Tides): Define a "peak" point (xnx_n is a peak if xn≥xmx_n \ge x_m for all m>nm > n). Either there are infinitely many peaks (which form a decreasing subsequence) or finitely many peaks (in which case we can construct an increasing subsequence). Since the sequence is bounded, the monotone subsequence must converge.
    3. Compactness Argument (Heine-Borel): In Rn\mathbb{R}^n, closed and bounded sets are compact. Sequential compactness follows from compactness. This is usually too high-level for a standard request unless specified (e.g., "using topology"). I'll stick to the elementary analysis proofs.

    Selection: The Bisection Method is the most "standard" textbook proof for an introductory real analysis course. It explicitly constructs the subsequence and the limit. The Peak Point Lemma is elegant but slightly less constructive regarding the limit value directly (though it proves the existence of a monotone subsequence). I will likely present the Bisection Method as the primary proof because it's very visual and intuitive.

    Drafting the Proof (Bisection Method):

    1. Assumption: Let (xn)(x_n) be a bounded sequence. Thus, there exist real numbers a0,b0a_0, b_0 such that a0≤xn≤b0a_0 \le x_n \le b_0 for all n∈Nn \in \mathbb{N}.
    2. Bisection Process: Divide I0=[a0,b0]I_0 = [a_0, b_0] into two equal halves.
      • Claim: At least one half contains infinitely many terms of the sequence. (Strictly speaking, terms of the sequence implies indices. Since nn goes to infinity, there are infinitely many terms. Even if values are constant, the set of indices is infinite).
    3. Selection: Let I1I_1 be a half-interval containing infinitely many terms of (xn)(x_n). Choose n1n_1 such that xn1∈I1x_{n_1} \in I_1.
    4. Iteration: Repeat. Split IkI_k into halves. Choose Ik+1I_{k+1} containing infinitely many terms. Choose nk+1>nkn_{k+1} > n_k such that xnk+1∈Ik+1x_{n_{k+1}} \in I_{k+1}. This is always possible because Ik+1I_{k+1} has infinitely many terms, so there must be terms with indices larger than nkn_k.
    5. Properties of the Subsequence:
      • The indices nkn_k are strictly increasing, so (xnk)(x_{n_k}) is a subsequence.
      • The intervals are nested: I0⊃I1⊃I2⊃…I_0 \supset I_1 \supset I_2 \supset \dots
      • Length of IkI_k is (b0−a0)/2k(b_0-a_0)/2^k, which goes to 0.
    6. Conclusion:
      • Let LL be the unique point in the intersection of these nested intervals (Nested Interval Property).
      • Alternatively, use Cauchy criterion: For any ϵ>0\epsilon > 0, choose KK such that length of IK<ϵI_K < \epsilon. For j,k≥Kj, k \ge K, xnj,xnkx_{n_j}, x_{n_k} are in IKI_K, so ∣xnj−xnk∣<ϵ|x_{n_j} - x_{n_k}| < \epsilon. Thus it's Cauchy, hence convergent.
      • Or just show ∣xnk−L∣≤length(Ik)→0|x_{n_k} - L| \le \text{length}(I_k) \to 0.

    Refining the "Infinitely many terms" part: Technically, a sequence is a function f:N→Rf: \mathbb{N} \to \mathbb{R}. The "infinitely many terms" refers to the preimage of an interval being infinite. If the range of the sequence is finite (e.g., 1,0,1,0,…1, 0, 1, 0, \dots), we need to be careful. If the range is finite, say S={y1,…,ym}S = \{y_1, \dots, y_m\}, then at least one yiy_i must appear infinitely many times. The constant subsequence yi,yi,…y_i, y_i, \dots converges. If the range is infinite, we use the bisection method. Self-correction: Usually, the bisection method is presented assuming the set of values {xn}\{x_n\} is infinite. If it's finite, the theorem is trivial (pick a value that repeats infinitely often). I should mention this edge case or handle it implicitly. The "preimage is infinite" argument works for the bisection method even if the range is finite, provided we select the interval carefully. Actually, if the range is finite, any interval containing an infinitely occurring value will do. But the bisection logic "At least one half contains infinitely many indices" holds regardless.

    Proof Structure for the Output:

    1. State the theorem clearly.
    2. Provide the proof using the Bisection Method (nested intervals).
    3. Step-by-step construction.
      • Enclose sequence in [a,b][a,b].
      • Bisect.
      • Select subinterval with infinitely many points.
      • Select element from subinterval.
      • Show convergence.

    Alternative: Peak Point Lemma. This is also very popular.

    1. Define peak.
    2. Case 1: Infinite peaks. They form a decreasing subsequence.
    3. Case 2: Finite peaks. Let NN be the index of the last peak. Then xN+1x_{N+1} is not a peak, so there exists n2>n1n_2 > n_1 with xn2≥xn1x_{n_2} \ge x_{n_1}. Repeat to get increasing subsequence.
    4. Since sequence is bounded, monotone subsequence converges by Monotone Convergence Theorem.

    I think the Bisection Method is more direct for "every bounded sequence" without invoking the Monotone Convergence Theorem first (though MCT is standard knowledge). I'll stick to Bisection as the primary proof but perhaps mention the Peak Point approach as an alternative perspective or just stick to one clear proof to avoid confusion. Bisection is the "classic" Bolzano-Weierstrass proof.

    Writing the response:

    • Introduction: Define the terms.
    • Proof: Use the Bisection Method.
      • Let (xn)(x_n) be bounded, so xn∈[a,b]x_n \in [a, b] for all nn.
      • Divide [a,b][a, b] into two halves. At least one half must contain xnx_n for infinitely many nn.
      • Call this half I1I_1. Pick n1n_1 such that xn1∈I1x_{n_1} \in I_1.
      • Repeat: Split IkI_k, choose half Ik+1I_{k+1} with infinitely many terms, pick nk+1>nkn_{k+1} > n_k such that xnk+1∈Ik+1x_{n_{k+1}} \in I_{k+1}.
      • Check: Is nk+1>nkn_{k+1} > n_k always possible? Yes, because there are infinitely many indices in Ik+1I_{k+1}, so we can pick one larger than the current max.
    • Convergence:
      • The length of IkI_k is (b−a)/2k→0(b-a)/2^k \to 0.
      • Let LL be the intersection point.
      • ∣xnk−L∣≤diam(Ik)→0|x_{n_k} - L| \le \text{diam}(I_k) \to 0.
      • Therefore xnk→Lx_{n_k} \to L.

    This looks solid. I will format it nicely with LaTeX.

    Double check: Does the theorem require the sequence to be distinct? No. Does the bisection method fail if values repeat? Suppose sequence is 1,1,1,1,…1, 1, 1, 1, \dots bounded in [0,2][0, 2]. Left half [0,1][0, 1], right half [1,2][1, 2]. xn∈[0,1]x_n \in [0, 1] for all nn. Infinitely many indices there. Select [0,1][0, 1]. Pick n1=1n_1=1. Next step: [0,0.5][0, 0.5] has 0 terms (indices). [0.5,1][0.5, 1] has infinitely many. Select [0.5,1][0.5, 1]. Pick n2=2n_2=2. The interval shrinks around 1. Subsequence is 1,1,11, 1, 1. Converges to 1. It works.

    What if the sequence is 1,0,1,0,…1, 0, 1, 0, \dots Start [0,1][0, 1]. Split [0,0.5][0, 0.5] and [0.5,1][0.5, 1]. Right half contains infinitely many indices (all odd indices). Left half contains infinitely many indices (all even indices). We can pick either. If we pick Right: Subsequence is 1,1,1…1, 1, 1 \dots (converges). If we pick Left: Subsequence is 0,0,0…0, 0, 0 \dots (converges). The logic holds: "At least one half contains infinitely many terms (indices)".

    I should use the phrase "infinitely many terms of the sequence" or "infinitely many indices" carefully. In analysis, "infinitely many terms of the sequence in interval II" usually means the set {n∈N:xn∈I}\{n \in \mathbb{N} : x_n \in I\} is infinite. I will make this explicit.

    Final check of the steps.

    1. Bounded sequence (xn)(x_n) implies ∃a,b\exists a, b such that a≤xn≤ba \le x_n \le b.
    2. Let I0=[a,b]I_0 = [a, b].
    3. Bisect I0I_0. Let L0,R0L_0, R_0 be the halves.
    4. At least one of L0,R0L_0, R_0 contains xnx_n for infinitely many indices nn. Let this be I1I_1.
    5. Choose n1n_1 such that xn1∈I1x_{n_1} \in I_1.
    6. Inductive step: Having defined IkI_k and nkn_k, bisect IkI_k. One half contains xnx_n for infinitely many indices. Let this be Ik+1I_{k+1}.
    7. Since there are infinitely many indices mm with xm∈Ik+1x_m \in I_{k+1}, there must be such an index m>nkm > n_k. Set nk+1=mn_{k+1} = m.
    8. This constructs subsequence (xnk)(x_{n_k}).
    9. xnk∈Ikx_{n_k} \in I_k. Length of IkI_k is (b−a)/2k(b-a)/2^k.
    10. By Nested Interval Theorem (or construction), intersection is a singleton LL.
    11. ∣xnk−L∣≤length(Ik)→0|x_{n_k} - L| \le \text{length}(I_k) \to 0.
    12. Thus xnk→Lx_{n_k} \to L.

    The proof is complete. I will write it out clearly.

    I'll also briefly mention the Peak Point Lemma method as an alternative, as it is very common in textbooks like Rudin. It adds value. But the bisection method is the constructive one often expected by the name "Bolzano-Weierstrass".

    Let's structure the answer:

    1. Theorem Statement.
    2. Proof 1: The Bisection Method (Nested Intervals). This is the main one.
    3. Proof 2: The Peak Point Lemma. A concise alternative.

    I will prioritize Proof 1 as it feels more fundamental to the geometric intuition of B-W.

    Proof 1 Details:

    • Lemma: A union of two finite sets is finite.
    • Contrapositive: If the union of two sets is infinite, at least one is infinite.
    • This justifies the "at least one half" step.

    Proof 2 Details:

    • Definition of Peak.
    • Lemma: Every sequence has a monotone subsequence.
    • Proof of lemma via cases (infinite peaks vs finite peaks).
    • Apply Boundedness + Monotone Convergence Theorem.

    I will stick to Proof 1 as the "Proof" and maybe add a note about Proof 2 if it feels right, but usually one rigorous proof is better than two sketchy ones. I will focus on the Bisection method. It is the historical proof due to Bolzano.

    Language: English. Math in LaTeX. Check constraints: "Prove that..." -> Provide a formal proof.

    One minor detail: "Infinitely many terms". Strictly speaking, a sequence is a map N→S\mathbb{N} \to S. The image might be finite. I will phrase it as: "The set of indices {n∈N:xn∈I}\{n \in \mathbb{N} : x_n \in I\} is infinite." This is precise.

    Ready to write. The Bolzano-Weierstrass Theorem states that every bounded sequence in R\mathbb{R} has a convergent subsequence.

    Below are two standard proofs of this theorem. The first uses the Bisection Method (Nested Intervals), which is constructive and illustrates exactly where the subsequence comes from. The second uses the Monotone Convergence Theorem via the "Peak Point" argument.


    Proof 1: The Bisection Method (Nested Intervals)

    Strategy: We start with an interval containing the entire sequence. We repeatedly bisect this interval, always choosing the half that contains infinitely many terms of the sequence. This traps the subsequence inside smaller and smaller intervals, forcing it to converge to a single point.

    Step 1: Constructing the Nested Intervals Let (xn)(x_n) be a bounded sequence. Since it is bounded, there exist real numbers a0a_0 and b0b_0 such that a0≤xn≤b0a_0 \le x_n \le b_0 for all nn. Let I0=[a0,b0]I_0 = [a_0, b_0].

    Bisect the interval I0I_0 into two subintervals of equal length: Jleft=[a0,a0+b02]andJright=[a0+b02,b0]J_{left} = \left[a_0, \frac{a_0+b_0}{2}\right] \quad \text{and} \quad J_{right} = \left[\frac{a_0+b_0}{2}, b_0\right] Since every term xnx_n is in I0I_0, it must be in at least one of these two halves. Therefore, at least one of these halves must contain infinitely many terms of the sequence (xn)(x_n). (If both contained only finitely many terms, the union—which is I0I_0—would contain only finitely many terms, which is a contradiction).

    Select one of the halves that contains infinitely many terms and call it I1=[a1,b1]I_1 = [a_1, b_1].

    Step 2: Induction Repeat this process inductively. Having constructed an interval Ik=[ak,bk]I_k = [a_k, b_k] that contains infinitely many terms of the sequence, bisect IkI_k. At least one half contains infinitely many terms; choose one and call it Ik+1=[ak+1,bk+1]I_{k+1} = [a_{k+1}, b_{k+1}].

    This produces a sequence of nested intervals I0⊃I1⊃I2⊃…I_0 \supset I_1 \supset I_2 \supset \dots such that:

    1. Each IkI_k contains infinitely many terms of (xn)(x_n).
    2. The length of IkI_k is b0−a02k\frac{b_0 - a_0}{2^k}.

    Step 3: Constructing the Subsequence We now select the terms of our subsequence (xnk)(x_{n_k}).

    • Choose n1n_1 such that xn1∈I1x_{n_1} \in I_1. (This is possible since I1I_1 has infinitely many terms).
    • Choose n2>n1n_2 > n_1 such that xn2∈I2x_{n_2} \in I_2. (This is possible since I2I_2 has infinitely many terms, so there must be terms with indices larger than n1n_1).
    • Continue this process: having chosen xnk∈Ikx_{n_k} \in I_k, choose nk+1>nkn_{k+1} > n_k such that xnk+1∈Ik+1x_{n_{k+1}} \in I_{k+1}.

    This constructs a subsequence (xnk)(x_{n_k}) where xnk∈Ikx_{n_k} \in I_k for every kk.

    Step 4: Convergence By the Nested Interval Property, since the length of IkI_k goes to 0 as k→∞k \to \infty, there exists a unique real number LL such that L∈IkL \in I_k for all kk. Specifically, lim⁡k→∞ak=L\lim_{k \to \infty} a_k = L and lim⁡k→∞bk=L\lim_{k \to \infty} b_k = L.

    Since xnk∈Ik=[ak,bk]x_{n_k} \in I_k = [a_k, b_k] for all kk, it follows that ak≤xnk≤bka_k \le x_{n_k} \le b_k. By the Squeeze Theorem: lim⁡k→∞ak≤lim⁡k→∞xnk≤lim⁡k→∞bk\lim_{k \to \infty} a_k \le \lim_{k \to \infty} x_{n_k} \le \lim_{k \to \infty} b_k L≤lim⁡k→∞xnk≤LL \le \lim_{k \to \infty} x_{n_k} \le L Therefore, lim⁡k→∞xnk=L\lim_{k \to \infty} x_{n_k} = L.


    Proof 2: The "Peak" Method (Monotonicity)

    Strategy: We show that every sequence has a monotone subsequence (either always increasing or always decreasing). If the original sequence is bounded, this monotone subsequence must also be bounded, and thus convergent by the Monotone Convergence Theorem.

    Step 1: Defining a "Peak" A term xnx_n of the sequence is called a peak if it is greater than or equal to all subsequent terms: xn≥xmfor all m>nx_n \ge x_m \quad \text{for all } m > n

    Step 2: Cases There are two possibilities for the number of peaks in the sequence (xn)(x_n):

    Case A: There are infinitely many peaks. Let the peaks occur at indices n1<n2<n3<…n_1 < n_2 < n_3 < \dots. Consider the subsequence of peaks (xnk)(x_{n_k}). By definition of a peak, xnk≥xnk+1x_{n_k} \ge x_{n_{k+1}} (since nk+1>nkn_{k+1} > n_k). Thus, the subsequence of peaks is monotone decreasing.

    Case B: There are finitely many peaks. Let NN be the index of the last peak (or 0 if there are no peaks). Then for any n>Nn > N, xnx_n is not a peak. By the definition of a peak, if xnx_{n} is not a peak, there must exist some m>nm > n such that xm>xnx_m > x_n. We can use this to construct an increasing subsequence:

    1. Start with n1=N+1n_1 = N + 1. Since xn1x_{n_1} is not a peak, there exists n2>n1n_2 > n_1 such that xn2>xn1x_{n_2} > x_{n_1}.
    2. Since xn2x_{n_2} is not a peak, there exists n3>n2n_3 > n_2 such that xn3>xn2x_{n_3} > x_{n_2}.
    3. Continuing this way, we obtain a strictly monotone increasing subsequence (xnk)(x_{n_k}).

    Step 3: Conclusion In both cases, we have constructed a monotone subsequence.

    • Since the original sequence (xn)(x_n) is bounded, the subsequence is also bounded.
    • By the Monotone Convergence Theorem, every bounded monotone sequence converges.

    Therefore, (xn)(x_n) has a convergent subsequence.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.