Skip to content
TheChatArchiveThe Chat Archive
GLMGLM-5 / Pony Alpha· unknownHugging Face Frontier Reasoning Traces

Write a Julia function that uses the @generated macro to create optimized code for…

  1. User

    Write a Julia function that uses the @generated macro to create optimized code for matrix multiplication based on input dimensions.

  2. GLM Assistant

    1. Understand the Goal: The user wants a Julia function using the @generated macro to perform matrix multiplication. The key is that the function should generate optimized code based on the input dimensions (sizes) of the matrices at compile time (or rather, just before runtime for specific types).

    1. Analyze @generated:

      • How it works: A generated function takes the types of the arguments as input and returns an expression (AST) that is then compiled and executed.
      • Why use it: To unroll loops, avoid bounds checking, call specific BLAS routines, or use specialized algorithms (like Strassen) based on size. The prompt asks for optimization based on dimensions.
      • Limitations: You can't inspect values of the arguments (the actual matrix data), only their types. StaticArrays are the perfect candidate for this because their dimensions are encoded in the type.
    2. Determine the Strategy:

      • Scenario A: Standard Array. Dimensions are part of the value, not the type. A generated function cannot know the dimensions of a standard Array{Float64, 2} at compile time. It would have to rely on size(A) inside the generated body, but that returns a value, which the generated function generator can't access (it only sees types). Correction: Actually, generated functions can generate code that calls size() at runtime, but that defeats the purpose of "optimization based on input dimensions" because the compiler doesn't know the size statically.
      • Scenario B: StaticArrays (SArray or MArray). Dimensions are in the type (e.g., SMatrix{3, 3, Float64}). This allows the generated function to extract NN and MM from the type parameters and generate unrolled code.

      Decision: The prompt implies optimizing based on dimensions. In Julia, this is almost exclusively done with StaticArrays. If the user meant standard arrays, @generated isn't the right tool for dimension-specific optimization (BLAS handles that at runtime). I should implement this using StaticArrays logic (even if I write the function generally, the benefit comes from static types).

      Refinement: I will write a function that takes standard Arrays or StaticArrays but checks if the dimensions are static. If they are static, it unrolls. If not, it falls back to standard *. Actually, let's stick to the most educational and practical example: A "Poor man's StaticArrays" implementation or a wrapper that specifically targets small static matrices for loop unrolling.

      Let's define the scope:

      • Input: Two matrices A and B.
      • Goal: If dimensions are small and known at compile time (via types), generate unrolled code. Otherwise, fallback to generic mul! or *.
    3. Drafting the Code:

      • Signature: function gen_matmul(A, B) end

      • The Generator:

        @generated function gen_matmul(A, B)
            # Extract types
            TA, TB = A, B # wait, A and B here are Types
            # Need to check if they have size parameters.
            # Let's assume inputs are AbstractArrays.
        end
        
      • Handling Type Parameters: I need to check if A and B are subtypes of AbstractArray and have Size or simply N, M in their parameters. Standard Array{T, N} doesn't have size in parameters. StaticArrays.SArray{S, T, N, L} has size S (Tuple) in parameters.

        Let's try to be generic. If A isa AbstractArray and B isa AbstractArray.

        Logic:

        1. Check if dimensions are known statically (Type parameters).
        2. If yes, and small (e.g., < 5x5), generate unrolled loop expressions.
        3. If no or large, return :(A * B).
      • The Unrolling Logic: For matrix C=A×BC = A \times B: Cij=∑kAikBkjC_{ij} = \sum_k A_{ik} B_{kj}

        I need to construct the AST for this. quote ... end or Expr(...).

      • Implementation Detail - Extracting Dimensions: How to get dimensions from types inside @generated? Base.dims(A) isn't quite right for types. If using StaticArrays, the type might look like SArray{Tuple{2, 3}, Float64, 2, 6}. I should probably use StaticArrays package in the example because it's the standard way to do this. However, writing a standalone function without dependencies is often preferred for "Write a function..." prompts unless specified. Can I do it without importing StaticArrays? Yes, by assuming the user provides types with size in parameters, or just treating standard arrays differently.

        Actually, the most common "Hello World" for @generated is manually unrolling a loop. Let's create a function that works on Standard Arrays but checks if the Type implies a specific size (which it won't for standard arrays). Wait, if I write a generated function for Array{T, 2}, I cannot know the size. Therefore, the prompt implicitly implies we are dealing with types where dimensions are available (like StaticArrays).

        Let's write a self-contained example that simulates how StaticArrays works, or specifically targets types that expose dimensions.

        Let's define a specific struct for the example to make it runnable? Or, let's write it for StaticArrays because that's the only practical answer. Alternative: I can write a generated function that decides which BLAS to call? No, that's internal compiler stuff.

        Let's go with the "Unrolling for Static Arrays" approach. I will verify if the types have size info. If they don't, I'll fall back to *.

      • Refining the Code Structure:

        @generated function my_mul(A, B)
            # Check for dimensions in type parameters.
            # This is tricky to do generically without StaticArrays.
            # Let's assume the user wants to see HOW to generate code.
        
            # Let's try a simpler approach:
            # If the type is a standard Array, we can't optimize by size.
            # So I will define a dummy type or use StaticArrays in the explanation.
        
            # Better approach:
            # Create a generated function that accepts Tuples of Tuples?
            # Or just assume StaticArrays.jl logic.
        
            # Let's look at the prompt again: "based on input dimensions".
            # This strongly suggests compile-time knowledge.
        
            # I will write a function that handles:
            # 1. StaticArrays (SArray) -> Unroll
            # 2. Standard Arrays -> Fallback to *
        end
        
      • Writing the Unroller: Dimensions M,K,K,N→M,NM, K, K, N \rightarrow M, N. Need to check A has dimensions (M, K) and B has (K, N). Code generation:

        ex = Expr(:block)
        # Preallocate C? No, let's assume output is new matrix.
        # To do this efficiently in a generated function without allocating a dynamic array inside the generator is key.
        # We can generate a tuple of tuples for the result.
        
      • Let's look for a specific optimization: Maybe vectorization? No, too complex for a snippet. Maybe just simple loop unrolling: Cij=Ai1B1j+Ai2B2j...C_{ij} = A_{i1}B_{1j} + A_{i2}B_{2j} ...

    4. Constructing the Solution:

      I will provide a solution that uses StaticArrays concepts (since standard arrays hide dimensions). I'll create a simplified version that checks if the types are SArray (from the package) or NTuple based matrices. Actually, to make the code runnable without installing packages, I can define a simple struct FixedSizeMatrix{M, N, T} and implement the logic for that. This explains the concept perfectly.

      Plan:

      1. Define a struct FixedSizeMatrix{M, N, T}.
      2. Write getindex for it.
      3. Write the @generated matmul function.
        • Input: Types of A and B.
        • Extract M, K, N from types.
        • If any dimension is unknown (dynamic), return :(A * B).
        • If known, check if compatible.
        • Generate nested loops as expressions.
    5. Refining the Generated Expression: We want to produce something like:

      C = FixedSizeMatrix{M, N, eltype(A)}(undef)
      @inbounds for i in 1:M, j in 1:N
          val = zero(T)
          for k in 1:K
              val += A[i,k] * B[k,j]
          end
          C[i,j] = val
      end
      return C
      

      But @generated allows us to unroll the inner loop. val = A[i,1] * B[1,j] + A[i,2] * B[2,j] ...

    6. Handling "Standard" Arrays: I must mention that @generated cannot optimize standard Arrays based on size because the size isn't in the type. The optimization applies to types where size is a type parameter (StaticArrays).

    7. Final Code Structure:

      • Use StaticArrays as the primary example because it's the idiomatic Julia way.
      • Or, to be self-contained, use a hypothetical wrapper or just assume types where size is known.
      • Decision: I will implement it for NTuples representing matrices or a simple custom struct to ensure it runs out of the box, but I will reference StaticArrays as the industry standard.
      • Actually, let's just stick to the logic. I'll write a generic generator that checks Base.size(A). If it returns a Tuple of Integers (static), generate unrolled code. If it returns Tuple{Vararg{Int}} (dynamic), return A*B.

      Wait, Base.size(::Type{Array{T, N}}) where N=2 doesn't give M,KM, K. Standard arrays are Array{T, N}. The size is not in the type. So I must use a type that encodes size. I'll define a simple wrapper struct in the code block to demonstrate.

      Drafting the custom struct:

      struct StaticMatrix{M, N, T}
          data::Vector{T}
      end
      # ... boilerplate ...
      

      This is getting too verbose.

      Alternative: Write the function for StaticArrays directly. It's the most honest answer. I'll provide instructions to Pkg.add("StaticArrays").

      Wait, I can try to inspect the type parameters. If A is a StaticArrays.SArray{S, T, N, L}, S is a Tuple of dims. If A is an Array{T, 2}, I can't do it.

      Pivot: I will write the function such that it demonstrates the syntax of @generated to unroll loops, assuming dimensions are available. I'll provide a small helper macro or function to mock the static size retrieval.

      Actually, the most impressive demo is loop unrolling. Let's create a generated function fast_mul(A, B). It will inspect the types. Logic:

      1. Get dimensions M, K and K2, N.
      2. Ensure K == K2.
      3. Build expression.

      Let's assume inputs are SMatrix from StaticArrays for the most realistic example, but I will also provide a fallback for standard arrays (just calling *).

      Self-Correction: The user might not want to install a package. I will write the example using Tuples of Tuples to represent matrices, or just explain the logic clearly. No, Tuples are 1D. Tuples of Tuples are row-major. Let's go with: "Here is how you would write it for a custom static matrix type".

      Let's refine the "Input Dimensions" part. If the user passes Array{Float64, 2}, the type is just that. If the user passes SArray{Tuple{2,3}, Float64}, the type has the dims. The code must handle the case where dims are not in the type.

    8. Final Plan for the Code:

      1. Define a custom struct Mat{M,N,T} to make the code runnable and self-contained. This teaches the user how it works.
      2. Implement getindex.
      3. Implement @generated function mul.
      4. Inside the generator:
        • Extract M, K from Mat{M,K,T}.
        • Extract K2, N from Mat{K2,N,T2}.
        • Assert K == K2.
        • If sizes are small (< 10x10), generate unrolled code C[i,j] = sum(A[i,k]*B[k,j]).
        • Else generate loop code with @inbounds.
    9. Writing the Expression Generator: We want:

      begin
          res = Mat{M,N,RetT}(zeros(...)) # or similar
          res[1,1] = A[1,1]*B[1,1] + A[1,2]*B[2,1] ...
          ...
          return res
      end
      

      Actually, generating the initialization is annoying with a custom struct. Maybe just generate the calculation logic and put it inside a generic function? No, the prompt asks for a function that creates optimized code. I will generate the unrolled sums for each element.

      Code Snippet Logic:

      @generated function matmul(A::Mat{M,K}, B::Mat{K,N}) where {M,K,N}
          # ... extract T types ...
          # Build expressions
          ex = Expr(:block)
          # Pre-allocate result logic here? Or return a constructor call?
          # Let's try to return a tuple of tuples? No, returning the same type Mat is better.
      
          # Generating the body
          body = quote
              C = Mat{M, N, promote_type(TA, TB)}(undef) # Assuming a constructor
          end
      
          for i in 1:M, j in 1:N
              # Unroll k
              terms = [:(A[$i, $k] * B[$k, $j]) for k in 1:K]
              push!(body.args, :(C[$i, $j] = $(Expr(:call, :+, terms...))))
          end
          push!(body.args, :(return C))
          return body
      end
      

      This looks correct and educational. It shows:

      1. Accessing type parameters.
      2. Constructing ASTs (Expr, quote).
      3. Unrolling loops.
      4. Interpolation of values ($i).
    10. Refining the explanation:

      • Explain that @generated receives types, not values.
      • Explain that standard Arrays don't carry dimensions in types, so this technique is for StaticArrays or custom types.
      • Provide the code.
    11. Double Check: Does A and B in the generated function header refer to types? Yes.

      • function matmul(A::Type{Mat{M,K,TA}}, B::Type{Mat{K2,N,TB}})? No.
      • Syntax: @generated function foo(x) ... end.
      • Inside, x is the type of the argument passed.
      • So if I call foo([1.0]), inside foo, x is Vector{Float64}.
      • In the signature matmul(A::Mat{M,K,TA}, B::Mat{K2,N,TB}) where {...}, inside the body, A and B are types? No, wait.
      • Correction: Inside a generated function, the arguments passed to the method body generator are the types of the runtime arguments.
      • If the function signature is foo(x::Int), and I call foo(1), the generator receives Int.
      • If the signature has where {N}, the generator receives Array{Int, N} (as a type).
      • I can use N directly in the generator body if it's in the where clause.
      • So: function gen_mul(A::Mat{M,K,TA}, B::Mat{K2,N,TB}) where {M,K,TA,K2,N,TB}.
      • Inside: M, K, etc. are available as values (Integers) because where parameters are treated as compile-time constants.
    12. Putting it together: I'll define a minimal Mat struct. I'll implement getindex. I'll implement the generated *.

      Self-Correction on Safety: Unrolling huge matrices is bad for compile time and code size. I should add a check: if M*N*K > 100 return :(generic_mul(A, B)) end.

      Structure of the Output:

      1. Explanation of @generated.
      2. Explanation of why we need a custom type (or StaticArrays).
      3. The Code (Struct + Implementation).
      4. Demonstration of usage.

      Code Details: The struct needs to hold data. struct StaticMat{M, N, T} data::NTuple{M*N, T} end Linear indexing is easier. ArcA_{rc} corresponds to index (r−1)×Cdim+c(r-1) \times C_{dim} + c. (Column major is Julia standard). getindex(A, r, c) = A.data[(c-1)*M + r]

      Refined Generated Logic:

      @generated function Base.:*(A::StaticMat{M,K,TA}, B::StaticMat{K,N,TB}) where {M,K,N,TA,TB}
          # Return type
          T = promote_type(TA, TB)
      
          # If too large, fallback to generic loop (though for this demo, unrolling is the point)
          # Let's just assume small sizes for the demo.
      
          # Build the result NTuple directly for maximum efficiency
          # res_data = ( ..., val_for_C_i_j, ... )
          # We need to build an expression that constructs the tuple.
      
          result_exprs = Expr(:tuple)
          # Iterate over linear indices of result C (Column major: M rows, N cols)
          for idx in 1:(M*N)
              # Calculate (i,j) from linear idx
              # Or iterate i,j to be clear
          end
      end
      

      Actually, iterating i,ji,j is clearer. For each element CijC_{ij}: term = Expr(:call, :+, [:(A[$i,$k] * B[$k,$j]) for k=1:K]...) Push term to result_exprs.

      Wait, A[i,k] inside the generated expression will call getindex. Since StaticMat is immutable and size is known, Julia will likely inline getindex. However, A inside the returned expression refers to the value of A (the struct instance), not the type. That's correct.

      Let's make sure the code is copy-pasteable and runs.

      Summary of Code:

      1. struct StaticMat
      2. getindex
      3. @generated Base.:*
      4. Test cases. Here is a Julia function that uses the @generated macro to create optimized code for matrix multiplication.

    The Concept

    Standard Julia arrays (Array) do not carry their dimensions as type information (a Matrix{Float64} can be 2×22 \times 2 or 1000×10001000 \times 1000). To optimize based on dimensions using @generated, we must use types where the size is part of the type signature, such as StaticArrays or a custom type.

    Below, I define a custom StaticMatrix type so the example is self-contained and runs without external packages. The generated function inspects the matrix dimensions at compile time and produces a nested loop (unrolled code) specifically for those sizes.

    The Code

    # 1. Define a simple custom matrix type where dimensions M, N are in the type parameters.
    #    This allows the compiler to "see" the size during code generation.
    struct StaticMatrix{M, N, T}
        data::Matrix{T}
        
        function StaticMatrix(data::Matrix{T}) where {T}
            M, N = size(data)
            new{M, N, T}(data)
        end
    end
    
    # Define basic properties for our type
    Base.size(::StaticMatrix{M, N}) where {M, N} = (M, N)
    Base.getindex(A::StaticMatrix, i::Int, j::Int) = A.data[i, j]
    Base.eltype(::StaticMatrix{M, N, T}) where {M, N, T} = T
    
    # 2. The Generated Function
    #    This function takes TYPES as arguments and returns an EXPRESSION (AST).
    @generated function Base.:*(A::StaticMatrix{M, K, TA}, B::StaticMatrix{K, N, TB}) where {M, K, N, TA, TB}
        # T is the promotion type of the inputs (e.g., Float64 * Int64 -> Float64)
        T = promote_type(TA, TB)
        
        # --- Logic to decide on optimization strategy ---
        # If the matrices are tiny, we fully unroll the loops into arithmetic.
        # If they are larger, we fall back to a standard generic loop to avoid code bloat.
        
        LIMIT = 8  # Threshold for unrolling (e.g., 8x8 or smaller)
        
        if M * K * N < LIMIT * LIMIT * LIMIT
            # STRATEGY A: Generate Unrolled Code (Loop Unrolling)
            # We build the code structure: 
            # result = zeros(T, M, N)
            # result[i, j] = sum(A[i, k] * B[k, j])
            
            # Create the expression for the result matrix initialization
            body = Expr(:block)
            
            # We cannot simply generate `zeros(M, N)` because M, N are Int values 
            # in the generated code context, but we need them available at runtime 
            # or hardcode the construction.
            # Let's generate a hardcoded tuple of tuples or use a comprehension.
            
            # We build the code: 
            # T[ sum(A[i,k]*B[k,j] for k in 1:K) for i in 1:M, j in 1:N ]
            
            # Create the inner sum expressions
            calc_rows = Expr(:vcat) # To construct the matrix
            
            for i in 1:M
                row_exprs = Expr(:row)
                for j in 1:N
                    # Compute the dot product for A row i and B col j
                    terms = [:(A[$i, $k] * B[$k, $j]) for k in 1:K]
                    sum_expr = Expr(:call, :+, terms...)
                    push!(row_exprs.args, sum_expr)
                end
                push!(calc_rows.args, row_exprs)
            end
            
            # Return the expression that constructs the StaticMatrix with the computed data
            return :(StaticMatrix($T[$calc_rows]))
        else
            # STRATEGY B: Fallback to Standard Generic Loop
            # We generate code that looks like standard multiplication but preserves 
            # the specific StaticMatrix wrapper.
            
            return quote
                # Standard triple loop
                C = zeros($T, $M, $N)
                @inbounds for i in 1:$M
                    for j in 1:$N
                        s = zero($T)
                        for k in 1:$K
                            s += A[i, k] * B[k, j]
                        end
                        C[i, j] = s
                    end
                end
                StaticMatrix(C)
            end
        end
    end
    
    # --- Usage Example ---
    
    # 3x2 Matrix
    A = StaticMatrix([1.0 2.0; 3.0 4.0; 5.0 6.0]) 
    
    # 2x4 Matrix
    B = StaticMatrix([1 2 3 4; 5 6 7 8])
    
    # Perform multiplication
    # The compiler generates specific code for (3x2) * (2x4) -> (3x4)
    C = A * B
    
    println("Matrix A (3x2):")
    display(A.data)
    
    println("\nMatrix B (2x4):")
    display(B.data)
    
    println("\nResult C (3x4):")
    display(C.data)
    
    # Verify correctness against standard Julia multiplication
    @assert C.data ≈ (A.data * B.data)
    

    How it works

    1. Type Parameters: The struct StaticMatrix{M, N, T} puts the dimensions M and N into the type parameters.
    2. Argument Capture: In @generated function f(A::Type, B::Type), the variables A and B inside the function body are actually the types (e.g., StaticMatrix{3, 2, Float64}), not the matrix values.
    3. Compile-Time Constants: The where {M, K, N} clause extracts the dimensions as compile-time constants (integers).
    4. Code Construction:
      • Small Matrices: If the dimensions are small (below the LIMIT), we manually construct the Abstract Syntax Tree (AST) for the calculation. For a 2×22 \times 2 multiplication, instead of generating for loops, we generate C[1,1] = A[1,1]*B[1,1] + A[1,2]*B[2,1]. This removes all loop overhead and branching.
      • Large Matrices: If the dimensions are large, generating unrolled code would cause "code bloat" (the compiled code would be massive). In this case, we return a quoted expression (quote ... end) containing standard loops, but we still use the static dimensions $M and $N to ensure the loops are optimized by the lower-level compiler.

    You can verify the generated code using @code_lowered A * B or @code_typed A * B. You will see that for small matrices, the code consists of simple arithmetic operations with no loops.