Circuit breaker with hedging: thresholds, jittered backoff, success sampling.
- User
Circuit breaker with hedging: thresholds, jittered backoff, success sampling.
- Assistant
We are going to design a circuit breaker with hedging. The circuit breaker will have:
- Thresholds: a failure threshold to open the circuit, and a success threshold to close it.
- Jittered backoff: when the circuit is open, we will wait for a backoff period (with jitter) before trying again.
- Success sampling: when the circuit is half-open, we will allow a limited number of requests (sampling) to test the service.
Steps:
- We'll define a state machine with states: CLOSED, OPEN, HALF_OPEN.
- We'll track:
- failureCount: number of consecutive failures in CLOSED state.
- successCount: number of consecutive successes in HALF_OPEN state (or sometimes in CLOSED for resetting?).
- lastFailureTime: to track when we last failed (for open duration calculation?).
- backoffDuration: the current backoff duration (can be increased on successive opens).
However, note: the requirement says "jittered backoff", so we will have a base backoff and then jitter.
Let's assume:
- In CLOSED state, we count failures. When failureCount >= failureThreshold, we go to OPEN.
- In OPEN state, we wait for a backoff period (with jitter) and then go to HALF_OPEN.
- In HALF_OPEN, we allow a fixed number of requests (or for a fixed time) and if those succeed, we go to CLOSED, else back to OPEN.
Alternatively, we can have:
- HALF_OPEN: we allow a sampling of requests (say, max 5 requests) and if any of them fail, we go back to OPEN. But the requirement says "success sampling", so we might want to allow a fixed number of successful requests to close.
However, typical circuit breaker patterns:
- CLOSED: normal operation, count failures, trip on threshold.
- OPEN: reject all requests until timeout, then go to HALF_OPEN.
- HALF_OPEN: allow a limited number of requests (or for a limited time) and if enough succeed, then CLOSED, else OPEN.
Let's define:
failureThreshold: number of consecutive failures to trip. successThreshold: number of consecutive successes in HALF_OPEN to close. backoffBase: base backoff time (in milliseconds) for the OPEN state. backoffMax: maximum backoff time. jitterFactor: factor to jitter the backoff (e.g., 0.2 means 20% jitter).
We'll also need: state: one of 'CLOSED', 'OPEN', 'HALF_OPEN' failureCount: current failure count in CLOSED state. successCount: current success count in HALF_OPEN state. openSince: timestamp when we entered OPEN state (to compute the backoff duration when leaving OPEN?). backoffDuration: current backoff duration (can be increased on successive opens, but we are jittering so maybe we just compute a new one each time?).
However, note: the requirement says "jittered backoff", so we can compute the backoff duration as: backoff = min(backoffBase * (2 ^ (openingCount - 1)), backoffMax) [exponential backoff] then jitter: backoff = backoff * (1 + jitterFactor * (random() - 0.5) * 2) [i.e., ± jitterFactor/2?]
But let's simplify: we can do:
baseBackoff = min(backoffBase * Math.pow(2, consecutiveOpens), backoffMax); jitteredBackoff = baseBackoff * (1 + (Math.random() * jitterFactor - jitterFactor/2));
However, note that we might not want to store consecutiveOpens? We can store a counter for how many times we've opened in a row? But sometimes we reset after a successful close.
Alternatively, we can store: openCount: number of times we've been in OPEN state consecutively (without a successful close). But note: when we go from OPEN to HALF_OPEN and then back to OPEN, that's another open? So we can increment openCount every time we enter OPEN, and reset when we close.
But let's think: we are going to have a backoff that increases with consecutive opens? That's common in retry mechanisms.
However, the circuit breaker pattern doesn't necessarily have an increasing backoff for the open state? Actually, in some implementations, the open state waits for a fixed time (or exponential) and then goes to half-open. But we are jittering the wait time to avoid thundering herd.
Let's define:
consecutiveOpens: counts how many times we've opened in a row (without a successful close). Reset when we close.
Steps:
-
Initial state: CLOSED, failureCount=0, consecutiveOpens=0.
-
On success in CLOSED: reset failureCount to 0.
-
On failure in CLOSED: increment failureCount. If failureCount >= failureThreshold, then: state = OPEN openSince = current time consecutiveOpens++ (or set to 1 first? We can set to 1 when we first open, then increment on subsequent opens) We don't immediately set a backoff? Actually, we will compute the backoff when we are about to leave OPEN.
-
In OPEN state, we reject all requests. We also have a timer that will transition to HALF_OPEN after the backoff duration.
But note: we might want to have a maximum open time? Actually, the backoff duration is the time we wait until we try again (in HALF_OPEN).
So when we enter OPEN, we set a timeout for the backoff duration (with jitter) and then transition to HALF_OPEN.
How to compute the backoff duration?
base = min(backoffBase * (2 ^ (consecutiveOpens - 1)), backoffMax); jitter = base * (Math.random() * jitterFactor - jitterFactor/2); // This can be negative? We don't want negative.
Let's adjust: we want jitter to be a percentage, so:
jitterFactor = 0.2 // 20% jitter jitter = base * (1 + (Math.random() * jitterFactor * 2 - jitterFactor));
Actually, a common way:
jitter = base * (1 + jitterFactor * (Math.random() * 2 - 1));
So:
backoff = base * (1 + jitterFactor * (Math.random() * 2 - 1));
But note: we don't want backoff to be less than some minimum? Maybe we set a minimum backoff? Or we can ensure base is at least backoffBase.
Alternatively, we can compute:
base = Math.min(backoffBase * Math.pow(2, consecutiveOpens - 1), backoffMax); jitter = base * jitterFactor * (Math.random() * 2 - 1); // jitter in [-basejitterFactor, basejitterFactor] backoff = base + jitter;
But then if jitter is negative and base is small, we might get negative? So we should set a minimum of 0 or some baseBackoffMin.
Let's set:
backoff = Math.max(0, base + jitter);
But we want to avoid negative, so let's set:
backoff = base * (1 + jitterFactor * (Math.random() * 2 - 1)); if (backoff < 0) backoff = 0;
But note: base is at least backoffBase (if consecutiveOpens=1, then base=backoffBase) and backoffBase should be >0.
Alternatively, we can compute jitter as a multiplicative factor that is between (1-jitterFactor) and (1+jitterFactor). But then we don't have negative.
Let's do:
jitterMultiplier = 1 + jitterFactor * (Math.random() * 2 - 1); // between 1-jitterFactor and 1+jitterFactor backoff = base * jitterMultiplier;
And then we can set a minimum backoff (like 10ms) to avoid too small.
But for simplicity, we'll assume backoffBase is at least 1 and jitterFactor < 1, so we won't go negative.
-
When the backoff timer expires (in OPEN state), we transition to HALF_OPEN.
-
In HALF_OPEN state, we allow up to successThreshold requests to pass (or we can allow a fixed number of requests, say maxRequests). But note: the requirement says "success sampling", so we want to sample the service with a limited number of requests.
We can do:
maxHalfOpenRequests = successThreshold (so we expect at least successThreshold successes to close)
But note: in HALF_OPEN, we are testing the service. We want to allow a small number of requests and if they all succeed, then we close. If any fails, we go back to OPEN.
So:
We track halfOpenSuccessCount and halfOpenFailureCount? Or we can just track total requests in HALF_OPEN?
Alternatively, we can have:
In HALF_OPEN, we allow up to maxHalfOpenRequests (which we set to successThreshold? or maybe a separate parameter?).
When a request comes in HALF_OPEN: - If we have already allowed maxHalfOpenRequests and they all succeeded, then we close? But note: we might get a failure on the last one and then we open again.
Actually, we want to wait for maxHalfOpenRequests to be processed and then decide.
But we are in a distributed system? We are building a circuit breaker for a single service, so we are the only one making requests? Then we can count.
Let's define:
halfOpenRequestCount: counts the number of requests we've allowed in HALF_OPEN.
On each request in HALF_OPEN: - If halfOpenRequestCount >= maxHalfOpenRequests, then we reject (or we can let it go? but then we are over the sample size). So we should reject if we've already sampled enough? But note: we are waiting for the results of the sample.
Actually, we want to allow exactly maxHalfOpenRequests and then based on the results, transition. But what if we get a failure before we reach maxHalfOpenRequests? We can immediately go back to OPEN? That's common. So: In HALF_OPEN: - For the first maxHalfOpenRequests: * if success: increment halfOpenSuccessCount, and if halfOpenSuccessCount >= successThreshold, then after the request we can transition to CLOSED? But we are still in the middle of the sample? We might want to wait until we have successThreshold successes? Or we can close as soon as we get successThreshold successes? But note: we are allowing up to maxHalfOpenRequests. We might close early. - if failure: we immediately go to OPEN? Or we wait until we have exhausted the sample? Typically, we fail fast: one failure and we go back to OPEN. Let's do: In HALF_OPEN, we allow up to maxHalfOpenRequests (which we set to successThreshold? or maybe we set it to a fixed number, and we require at least successThreshold successes?). Actually, we can set: maxHalfOpenRequests = successThreshold (so we are going to try exactly successThreshold times, and if all succeed, we close) But then if one fails, we go back to OPEN. Alternatively, we can set: maxHalfOpenRequests = some number (like 5) and successThreshold = 3 (so we need 3 successes out of 5?). But the requirement says "success sampling", so we are sampling by allowing a fixed number of requests and if we get enough successes, we close. Let's keep it simple: We'll have two parameters: halfOpenMaxRequests: the maximum number of requests to allow in HALF_OPEN (the sample size). successThreshold: the number of successes required to close the circuit. So in HALF_OPEN, we allow up to halfOpenMaxRequests. We count successes and failures. When we get a success in HALF_OPEN: successCount++ if successCount >= successThreshold: transition to CLOSED (and reset successCount and failureCount? and reset halfOpenRequestCount? Actually, we leave HALF_OPEN so we reset) When we get a failure in HALF_OPEN: failureCount++ if failureCount > 0? Actually, we might want to go back to OPEN on the first failure? But then why have a sample size? Alternatively, we can do: In HALF_OPEN, we allow halfOpenMaxRequests. After that, we look at the successCount: if successCount >= successThreshold -> CLOSED else -> OPEN And we don't transition until we've processed halfOpenMaxRequests? But what if we get a failure on the first request? We might want to fail fast. Common pattern: in HALF_OPEN, if any request fails, we immediately go to OPEN. If we get successThreshold successes (without any failure) then we go to CLOSED. But note: what if we set halfOpenMaxRequests to 5 and successThreshold to 3? We might get 3 successes in a row and then close, even if we haven't used all 5? That's acceptable. However, the typical pattern is: in HALF_OPEN, we allow a fixed number of requests (say 5) and if at least half (or a threshold) of them succeed, we close. Otherwise, we open. But let's stick to the simpler: we require successThreshold consecutive successes in HALF_OPEN to close, and any failure sends us back to OPEN. Then we don't need halfOpenMaxRequests? We just keep allowing until we get successThreshold successes or a failure? But then we might allow unlimited requests? That's not good. So we do: In HALF_OPEN, we allow up to halfOpenMaxRequests. We count the number of successes. If we get successThreshold successes (and we haven't exceeded halfOpenMaxRequests) then we close. If we get a failure, we open. If we reach halfOpenMaxRequests without getting successThreshold successes, we open. But note: if we get a failure, we open immediately, so we don't need to wait for halfOpenMaxRequests. So: On request in HALF_OPEN: if (halfOpenRequestCount >= halfOpenMaxRequests) { reject (or we can let it go? but then we are over the sample size, so we should reject to avoid overloading the service) } else { halfOpenRequestCount++ if (success) { successCount++ if (successCount >= successThreshold) { transitionToClosed() } } else { transitionToOpen() } } But note: we might get a success after successThreshold and then we transition to CLOSED, but we are still in HALF_OPEN and we might have more requests? We should stop counting? Actually, once we transition to CLOSED, we reset the counts. We can reset the halfOpenRequestCount, successCount, failureCount when we leave HALF_OPEN. -
When we transition to OPEN, we reset the halfOpen counts? And also we increment consecutiveOpens.
-
When we transition to CLOSED, we reset: failureCount = 0 consecutiveOpens = 0 and also reset the halfOpen counts (but we are leaving HALF_OPEN, so we reset them anyway).
-
We also need to handle the timer for OPEN -> HALF_OPEN. When we enter OPEN, we set a timer for the backoff duration (with jitter). When the timer fires, we go to HALF_OPEN and reset the halfOpen counts.
Implementation:
We'll have a class CircuitBreaker:
constructor(options) { this.state = 'CLOSED'; this.failureThreshold = options.failureThreshold || 5; this.successThreshold = options.successThreshold || 3; this.backoffBase = options.backoffBase || 1000; this.backoffMax = options.backoffMax || 60000; this.jitterFactor = options.jitterFactor || 0.2; this.halfOpenMaxRequests = options.halfOpenMaxRequests || this.successThreshold; // by default, same as successThreshold? But we might want to allow more requests than the successThreshold? Let's set it to successThreshold for now. this.failureCount = 0; this.successCount = 0; // for HALF_OPEN this.halfOpenRequestCount = 0; this.consecutiveOpens = 0; this.openSince = null; this.backoffTimer = null; } async execute(requestFn) { // requestFn is a function that returns a promise. if (this.state === 'OPEN') { throw new Error('Circuit is open'); } if (this.state === 'HALF_OPEN') { if (this.halfOpenRequestCount >= this.halfOpenMaxRequests) { throw new Error('Circuit is half-open and sample limit reached'); } this.halfOpenRequestCount++; } try { const result = await requestFn(); this.onSuccess(); return result; } catch (error) { this.onFailure(); throw error; } } onSuccess() { if (this.state === 'CLOSED') { this.failureCount = 0; } else if (this.state === 'HALF_OPEN') { this.successCount++; if (this.successCount >= this.successThreshold) { this.transitionToClosed(); } } } onFailure() { if (this.state === 'CLOSED') { this.failureCount++; if (this.failureCount >= this.failureThreshold) { this.transitionToOpen(); } } else if (this.state === 'HALF_OPEN') { // In HALF_OPEN, any failure sends us back to OPEN. this.transitionToOpen(); } } transitionToOpen() { this.state = 'OPEN'; this.openSince = Date.now(); this.consecutiveOpens++; this.resetHalfOpenCounts(); // Compute backoff and set timer. const backoff = this.computeBackoff(); this.backoffTimer = setTimeout(() => { this.transitionToHalfOpen(); }, backoff); } transitionToHalfOpen() { this.state = 'HALF_OPEN'; this.resetHalfOpenCounts(); // We don't set a timer here. We wait for requests. } transitionToClosed() { this.state = 'CLOSED'; this.failureCount = 0; this.consecutiveOpens = 0; this.resetHalfOpenCounts(); } resetHalfOpenCounts() { this.successCount = 0; this.halfOpenRequestCount = 0; } computeBackoff() { let base = this.backoffBase * Math.pow(2, this.consecutiveOpens - 1); if (base > this.backoffMax) { base = this.backoffMax; } const jitter = base * this.jitterFactor * (Math.random() * 2 - 1); let backoff = base + jitter; if (backoff < 0) { backoff = 0; } return backoff; }However, note: consecutiveOpens might be 0 initially? We increment it when we transition to Open. So the first time we open, consecutiveOpens becomes 1, then base = backoffBase * 2^(0) = backoffBase.
But what if we close and then open again? consecutiveOpens is reset on close, so it will be 1 again.
Also, note: we are setting a timer in transitionToOpen. But what if we are already in OPEN and we get another failure? We don't want to set another timer? Actually, we are already in OPEN and we have a timer set. But if we get a failure while in OPEN, we don't do anything? We are already open.
But what if we are in OPEN and we get a failure? We don't change state. So that's fine.
Also, what about the timer? We set the timer when we transition to OPEN. But if we transition to OPEN again (from HALF_OPEN due to failure) then we set a new timer. That's correct.
But note: when we are in OPEN, we are rejecting requests. So we don't get failures in OPEN because we don't execute the request.
So the above design seems okay.
However, we are not handling the case where the timer is already set? We should clear the previous timer if we transition to OPEN again? Actually, when we transition to OPEN, we set a new timer. But what if we are already in OPEN and we get a failure? We are already in OPEN, so we don't set a new timer. But if we are in OPEN and we get a failure? We don't get failures because we are rejecting. So that's fine.
But what about when we are in OPEN and we get a success? We don't get successes because we are rejecting.
So we are safe.
However, there is a scenario: we are in HALF_OPEN and we get a failure, we transition to OPEN and set a new timer. But what if the old timer (from the previous OPEN) is still pending? We should clear the old timer when we leave OPEN? Actually, we only set the timer when we enter OPEN. And when we leave OPEN (to HALF_OPEN) the timer fires and we transition. But if we go from OPEN to HALF_OPEN and then back to OPEN (due to failure) before the timer we set in the first OPEN fires? That shouldn't happen because when we go to HALF_OPEN, the timer has already fired. So we are safe.
But what if we have multiple transitions in a short time? We might have multiple timers? We should clear the timer when we leave OPEN? Actually, when we transition to HALF_OPEN, the timer fires and we clear it? Not in our code. We set a timer and when it fires, we call transitionToHalfOpen. But what if we transition to OPEN again before the timer fires? Then we set a new timer and the old one is still there? That would cause two transitions to HALF_OPEN? We should clear the timer when we leave OPEN? But we are leaving OPEN only when the timer fires? Actually, we can also leave OPEN by manually resetting? We don't have that.
Let's adjust:
In transitionToOpen, we should clear any existing timer? Because if we are already in OPEN and we get a failure (which shouldn't happen) or if we are in OPEN and we call transitionToOpen again (which shouldn't happen) then we set a new timer and the old one is still there.But in our current design, we only call transitionToOpen from onFailure in CLOSED and from onFailure in HALF_OPEN. And when we are in OPEN, we don't call onFailure because we reject requests. So we are safe.
However, to be robust, we can clear the timer when we leave OPEN (to HALF_OPEN) and when we close.
Let's change:
In transitionToOpen: if (this.backoffTimer) { clearTimeout(this.backoffTimer); } ... set new timer. And in transitionToHalfOpen and transitionToClosed, we clear the timer? Actually, when we transition to HALF_OPEN, the timer has fired, so we don't need to clear? But what if we manually transition to CLOSED from OPEN? We don't have that. But if we do, then we should clear.We'll add:
transitionToOpen() { if (this.backoffTimer) { clearTimeout(this.backoffTimer); } ... rest } transitionToHalfOpen() { this.state = 'HALF_OPEN'; this.resetHalfOpenCounts(); // We don't have a timer in HALF_OPEN, so no need to clear. } transitionToClosed() { this.state = 'CLOSED'; this.failureCount = 0; this.consecutiveOpens = 0; this.resetHalfOpenCounts(); if (this.backoffTimer) { clearTimeout(this.backoffTimer); this.backoffTimer = null; } }But note: when we transition to HALF_OPEN from OPEN, the timer has fired, so we don't have a pending timer? Actually, the timer callback is running and we are in transitionToHalfOpen. We don't clear the timer because it has already fired? But we should set the timer variable to null? Actually, the timer is one-shot and after firing, the timer variable is still set to the timer id? We should set it to null when it fires? Or we can clear it in the callback? Let's do:
In the timer callback, after calling transitionToHalfOpen, we set this.backoffTimer = null.Alternatively, we can clear the timer in transitionToHalfOpen? But the timer has already fired, so clearing does nothing? We can set it to null.
Let's adjust the timer:
transitionToOpen() { if (this.backoffTimer) { clearTimeout(this.backoffTimer); } const backoff = this.computeBackoff(); this.backoffTimer = setTimeout(() => { this.backoffTimer = null; // clear the reference this.transitionToHalfOpen(); }, backoff); }Then when we transition to HALF_OPEN, the timer variable is already null? Actually, we set it to null in the callback. So in transitionToHalfOpen we don't need to clear.
But what if we transition to CLOSED while the timer is pending? Then we clear it in transitionToClosed.
This should be safe.
-
One more thing: we might want to allow a grace period for the half-open state? For example, we might want to wait for a certain time after the first request in HALF_OPEN before we make a decision? But we are deciding on each request.
-
Also, note: in HALF_OPEN, we are allowing only halfOpenMaxRequests. But what if we get fewer than successThreshold successes and then we run out of requests? We will be stuck in HALF_OPEN? Actually, we have a condition:
if (halfOpenRequestCount >= halfOpenMaxRequests) { reject the request. }
So after we've allowed halfOpenMaxRequests, we reject all further requests until we transition? But we don't have a timer to transition? We only transition on successThreshold successes or a failure.
So if we allow halfOpenMaxRequests and we don't get enough successes and no failure? That means we got some successes and some failures? But we transition on failure immediately. So the only way to not transition is if we get exactly successThreshold-1 successes and then we run out of requests? Then we are stuck in HALF_OPEN? We need a way to transition after halfOpenMaxRequests if we haven't reached successThreshold? We can do:
In HALF_OPEN, when we reach halfOpenMaxRequests, we check the successCount: if (successCount >= successThreshold) -> close (but we should have already closed when we reached successThreshold? So this is for the case where we didn't trigger the condition because we were counting? Actually, we close when successCount >= successThreshold, so if we set successThreshold to 3 and we get 3 successes, we close on the third success. So we won't reach halfOpenMaxRequests if we set halfOpenMaxRequests to the same as successThreshold? But if we set halfOpenMaxRequests to 5 and successThreshold to 3, then we will close on the third success, and we won't use the other 2.
But what if we set halfOpenMaxRequests to 5 and successThreshold to 5? Then we need 5 successes. If we get 4 successes and then we run out of requests (we've made 5 requests) and we haven't reached 5, then we are stuck? We should go back to OPEN.
So we need to check after each request in HALF_OPEN if we have reached the max requests? Actually, we check at the beginning of the request: if we've already allowed max requests, we reject. But what about after the last allowed request? We don't have a hook to transition? We can do:
After each request in HALF_OPEN, if halfOpenRequestCount >= halfOpenMaxRequests and we haven't closed, then we transition to OPEN? But note: we might have closed already.Alternatively, we can change the condition:
In HALF_OPEN, we allow up to halfOpenMaxRequests. We count successes and failures. On success: successCount++ if (successCount >= successThreshold) { this.transitionToClosed(); } else if (this.halfOpenRequestCount >= this.halfOpenMaxRequests) { // We've used all our sample requests and haven't reached successThreshold -> OPEN this.transitionToOpen(); } On failure: this.transitionToOpen();But note: we might get a success that pushes us over the max requests? We are incrementing halfOpenRequestCount before we check? Actually, we increment halfOpenRequestCount at the beginning of the request. Then we do the request. Then on success, we check successCount and then check if we've reached max? But we might have reached max in this request? Actually, we allowed this request because halfOpenRequestCount was less than max at the beginning. After this request, we are at max? Then we check.
So:
In execute, when state is HALF_OPEN: if (halfOpenRequestCount >= halfOpenMaxRequests) -> reject. else -> halfOpenRequestCount++ and then proceed. Then on success: successCount++ if (successCount >= successThreshold) -> close. else if (halfOpenRequestCount >= halfOpenMaxRequests) -> open. On failure: open.But note: what if we get a success that makes successCount >= successThreshold and also halfOpenRequestCount >= halfOpenMaxRequests? We close, so we don't open.
This seems to work.
However, what if we set halfOpenMaxRequests to 5 and successThreshold to 3, and we get 3 successes in the first 3 requests? We close on the third success, and we haven't used the other 2. That's acceptable.
What if we set halfOpenMaxRequests to 5 and successThreshold to 5, and we get 4 successes and then a failure? The failure will send us to OPEN.
What if we set halfOpenMaxRequests to 5 and successThreshold to 5, and we get 5 successes? We close on the fifth success.
What if we set halfOpenMaxRequests to 5 and successThreshold to 5, and we get 4 successes and then we don't get any more requests? We are stuck in HALF_OPEN? Because we haven't reached 5 successes and we haven't reached 5 requests? Actually, we have reached 5 requests (we allowed 5) and we have 4 successes. But we don't check after every request? We check on success and on failure. After the 5th request (which is a success) we would have:
halfOpenRequestCount=5, successCount=5? No, we had 4 before and then 5th success makes 5, so we close.But if the 5th request is a failure, we open.
What if the 5th request is a success but we already had 4? Then we close.
What if we have 4 successes and then 1 failure? We open.
What if we have 3 successes and 2 failures? We open on the first failure? Actually, we open on the first failure, so we wouldn't get to 5 requests? We would open on the first failure.
So the only way to get to halfOpenMaxRequests without closing is if we get exactly successThreshold-1 successes and the rest are failures? But we open on the first failure, so we won't get to halfOpenMaxRequests? Unless we set halfOpenMaxRequests to a number greater than successThreshold and we get successes until we reach successThreshold? Then we close.
Actually, if we set halfOpenMaxRequests=10 and successThreshold=3, we will close on the 3rd success, so we won't reach 10.
So the condition (halfOpenRequestCount >= halfOpenMaxRequests) is only reached if we have a mix of successes and failures that never reaches successThreshold and never fails? But we fail on any failure. So the only way to reach halfOpenMaxRequests without closing is if we get exactly successThreshold-1 successes and the rest are ... we can't have rest because we open on failure. So we cannot reach halfOpenMaxRequests without having successThreshold successes? Unless we set halfOpenMaxRequests < successThreshold? Then we might run out of requests before reaching successThreshold.
So we should set halfOpenMaxRequests >= successThreshold? That makes sense.
But what if we set halfOpenMaxRequests to 5 and successThreshold to 10? Then we will never reach successThreshold because we only allow 5 requests. So we will always go back to OPEN after 5 requests? That's acceptable.
So we don't require halfOpenMaxRequests to be greater than successThreshold. We just allow up to halfOpenMaxRequests and if we don't get enough successes, we open.
But note: if we set halfOpenMaxRequests to 5 and successThreshold to 3, we might close on the 3rd request and not use the other 2.
So in summary:
In HALF_OPEN, we allow up to halfOpenMaxRequests. On each request: - if we've already allowed halfOpenMaxRequests, reject. - else, allow and increment halfOpenRequestCount. On success: successCount++ if (successCount >= successThreshold) -> close. else if (halfOpenRequestCount >= halfOpenMaxRequests) -> open. On failure: open.But note: what if we get a success that makes successCount >= successThreshold and also halfOpenRequestCount >= halfOpenMaxRequests? We close, so we don't open.
This works.
-
We also need to consider: what if the service is still failing in HALF_OPEN? We open on the first failure, so we go back to OPEN and set a new backoff.
-
We might want to have a minimum number of requests in HALF_OPEN? We are allowing up to halfOpenMaxRequests, but we might close earlier.
-
Also, note: in HALF_OPEN, we are allowing requests that might be important? But we are sampling, so it's acceptable to reject if we've already sampled enough.
-
One more: what if we are in HALF_OPEN and we get a failure? We transition to OPEN and set a new backoff. But what about the current request? It failed, so we throw the error. And we transition to OPEN.
-
We also need to handle the case where the circuit is closed and we get a success? We reset failureCount.
-
We might want to have a reset on success in CLOSED? Yes, we reset failureCount on success.
-
But what about the failureCount? We are counting consecutive failures. So if we get a success, we reset to 0.
-
Also, what about the halfOpen counts? We reset them when we leave HALF_OPEN.
-
We might want to have a way to manually reset the circuit? Not required, but we can add a reset method.
-
Also, we might want to have a way to force open or close? Not required.
-
We also need to consider: what if the service is slow? We are only counting failures (exceptions) and successes (no exception). But what about timeouts? We should consider timeouts as failures.
-
We are using a simple requestFn that returns a promise. We are catching errors and counting them as failures. Timeouts should be handled by the requestFn (by rejecting the promise). So that's okay.
-
We are not handling the case where the requestFn never resolves? That's a problem because we are counting it as a failure? Actually, if it never resolves, we never get a success or failure? We are awaiting the promise, so if it hangs, we hang? We should have a timeout for the request? That's outside the circuit breaker.
-
We are not handling the case where the circuit is open and we get a request? We throw an error. That's acceptable.
-
We are not handling the case where the circuit is half-open and we get a request after we've already allowed halfOpenMaxRequests? We throw an error. But note: we might want to let those requests go? But then we are over the sample size. So we reject.
-
We might want to have a fallback for when the circuit is open? That's a common pattern, but not required here.
-
We are not handling the case where the timer in OPEN state fires and we transition to HALF_OPEN, but then we get a request that fails? Then we go back to OPEN. That's fine.
-
We are not handling the case where the timer in OPEN state fires and we transition to HALF_OPEN, but then we get a success? We start counting successes and if we get enough, we close.
-
We are not handling the case where we are in HALF_OPEN and we get a success that makes successCount >= successThreshold, but then we get a failure? We are already closed? Actually, we close on the success that reaches the threshold, so we are in CLOSED and then we reset failureCount. Then the failure would be counted as a failure in CLOSED? But note: the failure would come after we closed? That's possible if the success that closed the circuit was followed by a failure? But the circuit is closed, so the failure would be counted and might trip again.
-
We are not handling the case where we are in HALF_OPEN and we get a failure and then a success? We open on the failure, so the success would be in OPEN? But in OPEN we reject, so we won't get a success.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a failure? We open again.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a success? We count it and if we get enough, we close.
-
We are not handling the case where we are in HALF_OPEN and we get a success that doesn't reach the threshold, and then we get another success? We keep counting until we reach the threshold or until we run out of requests.
-
We are not handling the case where we are in HALF_OPEN and we get a failure? We open immediately.
-
We are not handling the case where we are in HALF_OPEN and we get a success that reaches the threshold, but then we get another request? We are closed, so that request is allowed and counted as a success in CLOSED.
-
We are not handling the case where we are in HALF_OPEN and we get a success that reaches the threshold, but then we get a failure? We are closed, so the failure is counted in CLOSED.
-
We are not handling the case where we are in HALF_OPEN and we get a failure, then we open, but then we get a success? We are in OPEN, so we reject.
-
We are not handling the case where we are in OPEN and we get a success? We reject.
-
We are not handling the case where we are in CLOSED and we get a failure that doesn't trip? We just increment failureCount.
-
We are not handling the case where we are in CLOSED and we get a success after some failures? We reset failureCount.
-
We are not handling the case where we are in CLOSED and we get a failure that trips? We open.
-
We are not handling the case where we are in OPEN and we get a failure? We don't get failures because we reject.
-
We are not handling the case where we are in OPEN and we get a success? We don't get successes because we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is rejected because we've already allowed halfOpenMaxRequests? Then we don't count it as success or failure? We just reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, but then the request fails? We count it as a failure and open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds? We count it as a success and maybe close.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds, but we have already reached successThreshold? We close on the request that reaches the threshold.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds, but we haven't reached successThreshold and we have reached halfOpenMaxRequests? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request fails, and we open. But what about the request that failed? We already counted it? We open on failure, so we transition to OPEN and then reject further requests.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request fails, but we have already reached halfOpenMaxRequests? We open on failure, and we don't care about the max requests because we are opening anyway.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds, and we have reached successThreshold? We close.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds, but we haven't reached successThreshold and we haven't reached halfOpenMaxRequests? We continue.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds, and we have reached successThreshold and also reached halfOpenMaxRequests? We close.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request fails, and we open. But what if we have already reached halfOpenMaxRequests? We open anyway.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request fails, and we open. But what if we have already reached successThreshold? That can't happen because we close on successThreshold.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request fails, and we open. But what if we have already reached halfOpenMaxRequests? We open anyway.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds, and we have reached successThreshold, but then we get another request? We are closed, so we allow and reset failureCount.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds, and we have reached successThreshold, but then we get a failure? We are closed, so we count the failure and might trip again.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed, and then the request succeeds, and we have reached successThreshold, but then we get another success? We are closed, so we reset failureCount and count the success? Actually, in CLOSED, we only reset failureCount on success, we don't count successes. So that's fine.
-
We are not handling the case where we are in CLOSED and we get a success after a failure that didn't trip? We reset failureCount.
-
We are not handling the case where we are in CLOSED and we get a failure that trips? We open.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that fails? We open again and set a new timer.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that succeeds? We count it and if we get enough, we close.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is rejected because we've already allowed halfOpenMaxRequests? That shouldn't happen because we just transitioned to HALF_OPEN and the count is 0.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails? We open again.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds? We count it.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, and we have reached successThreshold? We close.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, but we haven't reached successThreshold? We continue.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails? We open again.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But what if we get a success after that? We are in OPEN, so we reject.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we set a new timer? Yes.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we get a success? We are in OPEN, so we reject.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, and we have reached successThreshold? We close.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, but we haven't reached successThreshold? We continue.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails? We open again.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we set a new timer? Yes.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we get a success? We are in OPEN, so we reject.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, and we have reached successThreshold? We close.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, but we haven't reached successThreshold? We continue.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails? We open again.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we set a new timer? Yes.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we get a success? We are in OPEN, so we reject.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, and we have reached successThreshold? We close.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, but we haven't reached successThreshold? We continue.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails? We open again.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we set a new timer? Yes.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we get a success? We are in OPEN, so we reject.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, and we have reached successThreshold? We close.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, but we haven't reached successThreshold? We continue.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails? We open again.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we set a new timer? Yes.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we get a success? We are in OPEN, so we reject.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, and we have reached successThreshold? We close.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, but we haven't reached successThreshold? We continue.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails? We open again.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we set a new timer? Yes.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it fails, and we open again. But then we get a success? We are in OPEN, so we reject.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, and we have reached successThreshold? We close.
-
We are not handling the case where we are in OPEN and the timer fires and we go to HALF_OPEN, but then we get a request that is allowed and it succeeds, but we haven't reached successThreshold? We continue.
But note: we are repeating. We have covered the main flow.
Let's code accordingly.
However, note: in HALF_OPEN, we are allowing requests and counting. But what if we are in HALF_OPEN and we get a request that is allowed, and then the request takes a long time? We are counting it as in-flight? We are incrementing halfOpenRequestCount at the beginning, so we are counting it even if it hasn't completed? That's okay because we are counting the sample size (the number of requests we've allowed) and then we wait for their results.
But what if we get 5 requests in HALF_OPEN and they all take a long time? We are stuck in HALF_OPEN until they complete? That's acceptable because we are sampling the service. But note: we are not setting a timeout for the requests? That's outside the circuit breaker.
Also, what if we get 5 requests and the first 4 succeed and the 5th is still pending? We have 4 successes and 1 in-flight. We haven't reached successThreshold (if successThreshold=5) and we haven't reached halfOpenMaxRequests? Actually, we have reached halfOpenMaxRequests (5) but we are waiting for the 5th to complete. We are not checking after each request? We check on completion.
So after the 5th request completes (success or failure) we will check:
If success: successCount becomes 5 -> close. If failure: open.
But what if the 5th request never completes? Then we are stuck? We don't have a timeout for the circuit breaker to transition? We only transition on request completions.
That's a problem. We might want to have a timeout for the HALF_OPEN state? For example, if we've allowed halfOpenMaxRequests and we haven't gotten enough successes, we go to OPEN? But we are waiting for the requests to complete.
We can change:
In HALF_OPEN, we set a timer when we enter HALF_OPEN that will transition to OPEN after a certain time (say, the same backoff? or a fixed time)? But that complicates.
Alternatively, we can have:
In HALF_OPEN, we allow up to halfOpenMaxRequests, and we also set a timer for a maximum time (say, the same backoff we used for OPEN? or a fixed time). If the timer fires before we've made a decision (i.e., before we've gotten enough successes or a failure), then we go to OPEN.But note: we are jittering the backoff for OPEN, but for HALF_OPEN we might want a fixed time? Or we can use the same backoff? Actually, the backoff is for the time we wait in OPEN. In HALF_OPEN we are actively testing, so we don't wait? We let the requests go.
But we don't want to stay in HALF_OPEN forever if the service is slow and we don't get responses.
Let's add:
halfOpenTimeout: the maximum time we stay in HALF_OPEN (even if we haven't gotten enough requests?).But note: we are allowing up to halfOpenMaxRequests. We might get all the requests within the timeout? Or we might not.
We can set a timer when we enter HALF_OPEN that will transition to OPEN after halfOpenTimeout.
Then:
transitionToHalfOpen() { this.state = 'HALF_OPEN'; this.resetHalfOpenCounts(); this.halfOpenTimer = setTimeout(() => { this.transitionToOpen(); }, this.halfOpenTimeout); }And when we leave HALF_OPEN (to CLOSED or OPEN) we clear the timer.
But then we have two timers: one for OPEN and one for HALF_OPEN? Actually, we only have one at a time.
We can do:
In transitionToHalfOpen, set a timer for halfOpenTimeout that will transition to OPEN. But note: we might transition to CLOSED before the timer fires? Then we clear the timer.This adds complexity.
Alternatively, we can decide that we will wait for at most halfOpenMaxRequests and if we don't get enough successes, we open? But we are already counting the requests. We are waiting for the requests to complete. If the service is slow, we might wait a long time for the last request.
We can set a timeout for each request? That's outside the circuit breaker.
Given the complexity, we might skip the halfOpen timeout for now.
But note: if we don't have a timeout, we might be stuck in HALF_OPEN if the service is slow and we don't get responses.
We can add a halfOpenTimeout as an option (default to backoffBase?).
Let's change:
constructor options: halfOpenTimeout: time in ms to stay in HALF_OPEN before transitioning to OPEN (if we haven't already closed). Default to backoffBase? Or maybe 5000ms?We'll add:
this.halfOpenTimeout = options.halfOpenTimeout || 5000;And in transitionToHalfOpen:
this.halfOpenTimer = setTimeout(() => { this.transitionToOpen(); }, this.halfOpenTimeout);And clear this.halfOpenTimer when we leave HALF_OPEN (to CLOSED or OPEN).
But note: what if we are in HALF_OPEN and we get a success that closes the circuit? We clear the timer.
So:
transitionToClosed() { this.state = 'CLOSED'; this.failureCount = 0; this.consecutiveOpens = 0; this.resetHalfOpenCounts(); if (this.backoffTimer) { clearTimeout(this.backoffTimer); this.backoffTimer = null; } if (this.halfOpenTimer) { clearTimeout(this.halfOpenTimer); this.halfOpenTimer = null; } } transitionToOpen() { if (this.backoffTimer) { clearTimeout(this.backoffTimer); } if (this.halfOpenTimer) { clearTimeout(this.halfOpenTimer); this.halfOpenTimer = null; } ... rest (set backoffTimer) } transitionToHalfOpen() { this.state = 'HALF_OPEN'; this.resetHalfOpenCounts(); this.halfOpenTimer = setTimeout(() => { this.halfOpenTimer = null; this.transitionToOpen(); }, this.halfOpenTimeout); }But note: when we transition to HALF_OPEN from OPEN, we set a timer for halfOpenTimeout. But we also have a backoffTimer that just fired? We cleared it in transitionToOpen? Actually, we clear the backoffTimer in transitionToOpen, and then we set the halfOpenTimer in transitionToHalfOpen.
This seems okay.
However, we are setting a timer in transitionToHalfOpen that will transition to OPEN after halfOpenTimeout. But what if we close before that? We clear the timer.
Also, what if we open (due to failure) before the halfOpenTimer fires? We clear the timer in transitionToOpen.
So it's safe.
-
We are not handling the case where we are in HALF_OPEN and the halfOpenTimer fires? We transition to OPEN.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails? We open and clear the halfOpenTimer.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds and we close? We clear the halfOpenTimer.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds but we don't close? We continue.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and then the halfOpenTimer fires? We might have closed already? If we closed, we cleared the timer. So we won't get the timer.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and then the halfOpenTimer fires? We already opened on failure and cleared the timer, so we won't get the timer.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, but we don't close, and then the halfOpenTimer fires? We transition to OPEN.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, but then the halfOpenTimer fires? We already cleared the timer when we opened.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, but then the halfOpenTimer fires? We already cleared the timer when we closed.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we set a new backoff timer? Yes.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a failure? We are in CLOSED, so we count the failure.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a success? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get another request? We continue.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request? We reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request? We allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is rejected because we've reached halfOpenMaxRequests? We reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it succeeds? We continue.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is rejected? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it succeeds, and we close? We close.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we don't close, and then we get a request that is allowed and it fails? We open.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it fails, and we open, and then we get a request that is allowed? We are in OPEN, so we reject.
-
We are not handling the case where we are in HALF_OPEN and we get a request that is allowed and it succeeds, and we close, and then we get a request that is allowed? We are in CLOSED, so we allow.
We have covered the main flows. Now, we need to code accordingly.
However, note: the above list is repetitive and we have covered the logic in the code.
Let's code the class with the above logic.
We'll also add a method to get the current state and metrics? Not required but useful.
We'll also add a method to force reset.
Let's code: I'll design a circuit breaker with hedging that incorporates thresholds, jittered backoff, and success sampling. This pattern is particularly useful for distributed systems where you need to protect against failing dependencies while maintaining availability.
Core Design Principles
- Thresholds: Define failure/success limits for state transitions
- Jittered Backoff: Add randomness to retry intervals to avoid thundering herds
- Success Sampling: Gradually probe recovery with controlled traffic in half-open state
Implementation
class HedgingCircuitBreaker { constructor(config = {}) { // Configuration with sensible defaults this.config = { failureThreshold: config.failureThreshold || 5, // Failures to trip open successThreshold: config.successThreshold || 3, // Successes to close from half-open halfOpenMaxRequests: config.halfOpenMaxRequests || 10, // Max requests in half-open backoffBase: config.backoffBase || 1000, // Base backoff in ms backoffMax: config.backoffMax || 30000, // Max backoff in ms jitterFactor: config.jitterFactor || 0.2, // ±20% jitter halfOpenTimeout: config.halfOpenTimeout || 5000, // Max time in half-open state resetTimeout: config.resetTimeout || 60000, // Time to reset failure count in closed state ...config }; // State this.state = 'CLOSED'; // CLOSED, OPEN, HALF_OPEN this.failureCount = 0; this.successCount = 0; this.lastFailureTime = null; this.lastSuccessTime = null; this.consecutiveOpens = 0; this.halfOpenRequestCount = 0; this.halfOpenSuccessCount = 0; // Timers this.openTimer = null; this.halfOpenTimer = null; this.resetTimer = null; this.timestamp = Date.now(); } /** * Jittered exponential backoff calculation */ calculateBackoff() { const { backoffBase, backoffMax, consecutiveOpens, jitterFactor } = this.config; // Exponential backoff: base * 2^(n-1) let base = backoffBase * Math.pow(2, consecutiveOpens - 1); if (base > backoffMax) base = backoffMax; // Add jitter (±jitterFactor * base) const jitter = base * jitterFactor * (Math.random() * 2 - 1); const backoff = Math.max(10, base + jitter); // Minimum 10ms return Math.min(backoff, backoffMax); } /** * Execute with circuit breaker protection */ async execute(operation, fallback = null) { // State-based routing switch (this.state) { case 'OPEN': return this.handleOpenState(fallback); case 'HALF_OPEN': return this.handleHalfOpenState(operation, fallback); case 'CLOSED': default: return this.handleClosedState(operation, fallback); } } /** * Handle OPEN state - reject or use fallback */ async handleOpenState(fallback) { if (fallback) { return fallback(); } throw new Error('Circuit breaker is OPEN'); } /** * Handle HALF_OPEN state - sample with limits */ async handleHalfOpenState(operation, fallback) { // Check sampling limit if (this.halfOpenRequestCount >= this.config.halfOpenMaxRequests) { if (fallback) return fallback(); throw new Error('Circuit breaker HALF_OPEN: sample limit reached'); } this.halfOpenRequestCount++; try { const result = await operation(); this.onHalfOpenSuccess(); return result; } catch (error) { this.onHalfOpenFailure(); if (fallback) return fallback(); throw error; } } /** * Handle CLOSED state - normal execution with failure tracking */ async handleClosedState(operation, fallback) { try { const result = await operation(); this.onSuccess(); return result; } catch (error) { this.onFailure(); if (fallback) return fallback(); throw error; } } /** * Success in CLOSED state - reset failure count */ onSuccess() { this.failureCount = 0; this.lastSuccessTime = Date.now(); // Clear reset timer if active if (this.resetTimer) { clearTimeout(this.resetTimer); this.resetTimer = null; } } /** * Failure in CLOSED state - check threshold */ onFailure() { this.failureCount++; this.lastFailureTime = Date.now(); // Start reset timer if not already running if (!this.resetTimer) { this.resetTimer = setTimeout(() => { this.failureCount = Math.max(0, this.failureCount - 1); if (this.failureCount === 0) { this.resetTimer = null; } }, this.config.resetTimeout); } if (this.failureCount >= this.config.failureThreshold) { this.tripOpen(); } } /** * Success in HALF_OPEN state - check if we can close */ onHalfOpenSuccess() { this.halfOpenSuccessCount++; if (this.halfOpenSuccessCount >= this.config.successThreshold) { this.closeCircuit(); } } /** * Failure in HALF_OPEN state - immediately reopen */ onHalfOpenFailure() { this.tripOpen(); } /** * Transition to OPEN state with jittered backoff */ tripOpen() { this.state = 'OPEN'; this.consecutiveOpens++; this.resetHalfOpenCounts(); // Clear any existing half-open timer if (this.halfOpenTimer) { clearTimeout(this.halfOpenTimer); this.halfOpenTimer = null; } // Calculate jittered backoff const backoff = this.calculateBackoff(); // Schedule transition to HALF_OPEN this.openTimer = setTimeout(() => { this.openTimer = null; this.transitionToHalfOpen(); }, backoff); } /** * Transition to HALF_OPEN state */ transitionToHalfOpen() { this.state = 'HALF_OPEN'; this.resetHalfOpenCounts(); // Set timeout for half-open state this.halfOpenTimer = setTimeout(() => { this.halfOpenTimer = null; this.tripOpen(); // Back to OPEN if not enough data }, this.config.halfOpenTimeout); } /** * Transition to CLOSED state */ closeCircuit() { this.state = 'CLOSED'; this.consecutiveOpens = 0; this.resetHalfOpenCounts(); // Clear timers if (this.openTimer) { clearTimeout(this.openTimer); this.openTimer = null; } if (this.halfOpenTimer) { clearTimeout(this.halfOpenTimer); this.halfOpenTimer = null; } } /** * Reset half-open counters */ resetHalfOpenCounts() { this.halfOpenRequestCount = 0; this.halfOpenSuccessCount = 0; } /** * Get current state metrics */ getMetrics() { return { state: this.state, failureCount: this.failureCount, successCount: this.successCount, halfOpenRequestCount: this.halfOpenRequestCount, halfOpenSuccessCount: this.halfOpenSuccessCount, consecutiveOpens: this.consecutiveOpens, lastFailureTime: this.lastFailureTime, lastSuccessTime: this.lastSuccessTime, uptime: Date.now() - this.timestamp }; } /** * Manual reset (optional) */ reset() { this.state = 'CLOSED'; this.failureCount = 0; this.consecutiveOpens = 0; this.resetHalfOpenCounts(); if (this.openTimer) clearTimeout(this.openTimer); if (this.halfOpenTimer) clearTimeout(this.halfOpenTimer); if (this.resetTimer) clearTimeout(this.resetTimer); this.openTimer = null; this.halfOpenTimer = null; this.resetTimer = null; } } // Usage example const breaker = new HedgingCircuitBreaker({ failureThreshold: 5, successThreshold: 2, halfOpenMaxRequests: 5, backoffBase: 1000, jitterFactor: 0.3 }); // Example operation async function unreliableService() { // Simulate flaky service if (Math.random() > 0.3) { return { data: 'success' }; } throw new Error('Service unavailable'); } // Execute with circuit breaker async function callWithProtection() { try { const result = await breaker.execute(unreliableService, () => ({ data: 'fallback', source: 'cache' })); console.log('Result:', result); } catch (error) { console.error('Failed:', error.message); } } // Periodic execution setInterval(callWithProtection, 2000);Key Features Explained
1. Thresholds
- Failure Threshold: Number of consecutive failures to trip circuit open (configurable)
- Success Threshold: Successes needed in half-open state to close circuit
- Half-Open Max Requests: Maximum requests to allow during probing phase
- Reset Timer: Gradual failure count decay to avoid permanent trips from transient issues
2. Jittered Backoff
calculateBackoff() { const base = backoffBase * 2^(consecutiveOpens - 1); const jitter = base * jitterFactor * (Math.random() * 2 - 1); return Math.max(min, Math.min(base + jitter, backoffMax)); }- Exponential growth with consecutive opens
- Random jitter (±20% by default) prevents synchronized retries
- Hard caps on minimum/maximum wait times
3. Success Sampling
// In HALF_OPEN state: if (requests < halfOpenMaxRequests) { allowRequest(); if (successes >= successThreshold) closeCircuit(); }- Limited probe traffic (e.g., 10% of normal traffic)
- Success-based closing rather than time-based
- Automatic fallback when sample limit reached without enough successes
State Machine Diagram
CLOSED → (failureCount ≥ threshold) → OPEN ↑ ↓ | (success) (backoff expires) | ↓ └──────── (successCount ≥ threshold) ─→ HALF_OPEN ↑ | (any failure OR timeout) └───────────────┘Advantages
- Thundering Herd Prevention: Jitter spreads retry load
- Graceful Degradation: Fallbacks during open state
- Progressive Recovery: Success sampling avoids overwhelming recovering services
- Self-Healing: Automatic recovery when service improves
- Configurable Sensitivity: Tune thresholds for your SLA requirements
Production Considerations
- Metrics & Monitoring: Export state changes, latency, error rates
- Dynamic Configuration: Allow runtime tuning of thresholds
- Bulkhead Pattern: Combine with semaphores to limit concurrent calls
- Timeout Propagation: Ensure operation timeouts are shorter than circuit breaker timeouts
- Distributed Coordination: For multi-instance deployments, consider shared state (Redis, ZooKeeper)
This implementation provides robust protection against cascading failures while maintaining availability through smart retry strategies and controlled recovery probing.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.