What remains constant when a monochromatic harmonic plane wave passes through an…
- User
What remains constant when a monochromatic harmonic plane wave passes through an interface between two media?A: (k_R = k_L) B: (c_R = c_L) C: (\omega_R = \omega_L) D: (A_R = A_L)
Assistant
A: (k_R = k_L) (wave number) B: (c_R = c_L) (wave speed) C: (\omega_R = \omega_L) (angular frequency) D: (A_R = A_L) (amplitude)
We consider a plane wave incident from medium L (left) to medium R (right). At the interface, boundary conditions must be satisfied for all times. For a harmonic wave, the time dependence is of the form (e^{-i\omega t}) (or (\cos(\omega t + \phi))). The incident, reflected, and transmitted waves all share the same temporal frequency because the boundary conditions couple the fields on both sides. If the transmitted wave had a different frequency, the continuity of the field (or its derivative, depending on the physical nature of the wave) at the interface could not hold for all (t), as the time-dependent factors would not match. Therefore, the frequency (\omega) must be identical on both sides.
The wave number (k = 2\pi/\lambda) is related to the wavelength. In a medium, the wavelength is (\lambda = c/f), where (c) is the phase speed and (f = \omega/(2\pi)). Since the speed (c) changes when the wave enters a different medium (e.g., due to refractive index for light or density for sound), the wavelength changes, and thus (k) changes. Hence (k_R \neq k_L) generally.
The wave speed (c) is a property of the medium (e.g., (c = c_0/n) for light). It differs between media unless the media have identical properties, which is not generally the case. So (c_R \neq c_L).
The amplitude (A) is not constant because part of the wave is reflected at the interface, and the transmitted amplitude is determined by the transmission coefficient, which depends on the impedances of the media. Only in the special case of matched impedance would the amplitude be the same, but generally it is not. So (A_R \neq A_L).
Thus, the only quantity that remains constant across the interface is the angular frequency (\omega).
Therefore, the correct answer is C: (\omega_R = \omega_L).
The angular frequency (\omega) remains constant when a monochromatic harmonic plane wave passes through an interface between two media. This is a fundamental property of wave propagation: the frequency is determined by the source and cannot be altered by a passive boundary. Boundary conditions at the interface require that the time dependence of the wave fields on both sides match for all times, which forces (\omega) to be the same in both media. In contrast, the wave number (k), phase speed (c), and amplitude (A) change because they depend on the properties of the medium and on reflection/transmission coefficients.
Hence, the correct choice is C: (\omega_R = \omega_L).