Skip to content
TheChatArchiveThe Chat Archive
DeepSeekDeepseek v3.2· deepseekHugging Face Frontier Reasoning Traces

You are given a rebus of form ? + ? - ? + ? = n, consisting of only question marks,…

  1. User

    You are given a rebus of form ? + ? - ? + ? = n, consisting of only question marks, separated by arithmetic operation '+' and '-', equality and positive integer n. The goal is to replace each question mark with some positive integer from 1 to n, such that equality holds. Input

    The only line of the input contains a rebus. It's guaranteed that it contains no more than 100 question marks, integer n is positive and doesn't exceed 1 000 000, all letters and integers are separated by spaces, arithmetic operations are located only between question marks.

    Output

    The first line of the output should contain "Possible" (without quotes) if rebus has a solution and "Impossible" (without quotes) otherwise.

    If the answer exists, the second line should contain any valid rebus with question marks replaced by integers from 1 to n. Follow the format given in the samples.

    Examples

    Input

    ? + ? - ? + ? + ? = 42

    Output

    Possible 9 + 13 - 39 + 28 + 31 = 42

    Input

    ? - ? = 1

    Output

    Impossible

    Input

    ? = 1000000

    Output

    Possible 1000000 = 1000000

  2. DeepSeek Assistant

    We need to solve a rebus: an expression with k question marks (k >= 1), with operators '+' and '-' between them, and then '=' and an integer n. The operators alternate between question marks, but can be both plus and minus in any pattern. The expression is something like: ? op1 ? op2 ? ... op_{k-1} ? = n, where each op is either '+' or '-'. We need to assign positive integers from 1 to n inclusive to each ? such that the arithmetic expression evaluates to n. We need to output Possible/Impossible and a solution if possible.

    We need to consider the constraints: up to 100 question marks, n up to 1e6. So we need to determine existence and construct an assignment.

    Let the question marks be variables x1, x2, ..., xk. The expression is: x1 (op1) x2 (op2) ... (op_{k-1}) xk = n.

    Define sign for each variable: Typically we can consider that the first variable has positive sign (since it's at start). Actually expression is sum with signs: each variable appears with a sign determined by the number of preceding minus signs. For example: a + b - c + d: signs: a: +, b: +, c: -, d: +. So we have s_i = +1 or -1 for each x_i, where s_1 = +1, and for i>1, s_i = s_{i-1} multiplied by (+1 if operator before is '+' else -1?). Wait careful: In the usual evaluation of left-associative operations? But arithmetic operators are left-associative: ? + ? - ? means ( ( ? + ? ) - ? ). However, the sign of each variable depends on the operators and the order. Actually if we have expression: x1 + x2 - x3 + x4, standard left-to-right evaluation yields ((x1 + x2) - x3) + x4 = x1 + x2 - x3 + x4, which is equivalent to sum of each variable with coefficient +1 or -1: indeed coefficients: +1 for x1, +1 for x2, -1 for x3, +1 for x4. This holds because subtraction is equivalent to adding the negative. For any sequence of plus and minus, the net coefficient of each variable is either +1 or -1, and the sign of the first is always +. For i>1, the sign flips if the operator before it is '-'? Actually consider: x1 - x2 + x3 - x4: Evaluate: ((x1 - x2) + x3) - x4 = x1 - x2 + x3 - x4. So signs: x1:+, x2:-, x3:+, x4:-. So pattern: start with +. For each subsequent variable, its sign equals the sign of the operator preceding it if we consider '+' corresponds to +1 and '-' to -1? But operator before x2 is '-', and x2 gets coefficient -1. Indeed. So s_i = +1 if the operator before variable i is '+' (or if i=1, no operator, treat as implicit '+'), else s_i = -1. That matches. So we can treat the expression as: sum_{i=1 to k} s_i * x_i = n, where s_1 = +1, and for i >= 2, s_i = +1 if the (i-1)-th operator is '+', else -1.

    Thus we have a linear Diophantine equation: sum_{i} s_i * x_i = n, with each x_i integer between 1 and n inclusive (positive integer up to n). We need to find such x_i. Also note that each x_i must be at most n, but also at least 1. And we have up to 100 variables, n up to 1e6.

    Observation: Since the signs can be plus or minus, we can think of separating variables into two groups: those with positive sign (P) and those with negative sign (N). Then we have sum_{i in P} x_i - sum_{j in N} x_j = n. Or equivalently sum_{i in P} x_i = n + sum_{j in N} x_j.

    All x_i are positive. So sum_{P} x_i must be at least n + |N| (since each negative term at least 1). But also each variable at most n.

    We need to find any assignment.

    We can treat this as: we need to assign numbers such that the total sum of all numbers (positive signs counted as plus, negative signs as minus) equals n.

    Given that we have flexibility, existence conditions: The equation has many variables, so it's usually possible unless constraints are too tight.

    But we have restrictions: each x_i ∈ [1, n]. That gives both lower and upper bounds.

    Consider the maximum possible value of the sum: if we assign maximum n to all positive signed variables and 1 to all negative signed variables, the sum is sum_{P} n - sum_{N} 1 = n * p - n_min, where p = |P|, n_min = |N|. Similarly the minimum possible sum: assign 1 to positives, n to negatives, gives p1 - n_minn = p - n*n_min. That could be negative large. But we need sum exactly n.

    We need to find if there exists assignment with each variable between 1 and n inclusive satisfying sum s_i x_i = n.

    This is like a bounded knapsack but with small constraints, we could attempt a constructive approach.

    Since n can be up to 1e6 but number of variables up to 100, we might try to set all variables to 1 initially, then adjust.

    Let initial assignment: all x_i = 1. Then the sum S0 = sum_{i} s_i * 1 = (number of positive signs) - (number of negative signs). Denote P = count of '+ sign' variables, N = count of '-' sign variables. So S0 = P - N.

    We need to reach n. We can increase some variables. If we increase a variable with sign + by d (from 1 to 1+d), the sum increases by d. If we increase a variable with sign - by d, the sum decreases by d (since - (1+d) vs -1, difference = -d). So we have ability to adjust sum in steps by changing variables within their bounds [1,n].

    We need to achieve target n. Let delta = n - S0. If delta >= 0, we may need to increase sum (positive delta). To increase sum, we can increase positive variables or decrease negative variables? Actually increasing a negative variable (making it larger) decreases sum; decreasing a negative variable (making it smaller) increases sum. But we cannot decrease a variable below 1. Initially all are 1, so we can only increase them. So initially we are at minimum for positive variables? For positive variables, the minimum is 1, so to increase sum we can increase positive variables (increases sum) or decrease negative variables (which would increase sum) but negative variables are at minimum 1, we cannot decrease them because they're already at 1. Actually if sign is negative, the value x_i contributes -x_i. The minimum contribution from that variable is when x_i is as large as possible? Wait: s_i = -1, so contribution = -x_i. To maximize sum, we want x_i as small as possible (since -x_i is larger when x_i is smaller). The minimum x_i is 1, which gives contribution -1. The maximum x_i gives contribution -n, which is lower. So from initial assignment (all 1), the sum is at maximum? Actually check: For negative variables, setting x_i=1 gives contribution -1, which is the highest possible (since -1 > -n). For positive variables, setting x_i=1 gives contribution 1, which is the lowest possible (since n > 1). So overall, with all ones, the sum is: P1 + N(-1) = P - N. Is this the maximum possible sum? Let's see: to increase sum beyond P-N, we could increase positive variables (increase sum) or decrease negative variables (increase sum). But negative variables are already at the minimum (1), so we cannot decrease them further; we can only increase them, which would decrease sum. Positive variables can be increased to increase sum. So from all ones, the sum can be increased by raising positive variables. So P - N is the minimum? Let's compute: For positive variables, minimal value is 1 giving minimal contribution; maximal is n giving max contribution. For negative variables, minimal x_i gives max contribution (since -1 > -n), so setting them to 1 gives max contribution, and setting them to n gives min contribution. So the sum can vary from (minimum sum) to (maximum sum). Let's define:

    Minimum possible sum: we want sum as low as possible. That would be: minimize sum = sum_{P} x_i - sum_{N} x_i. To minimize, set positives to minimum (1) and negatives to maximum (n). So min_sum = P1 - Nn = P - N*n.

    Maximum possible sum: set positives to maximum (n) and negatives to minimum (1). So max_sum = Pn - N1 = P*n - N.

    Our target n must lie between min_sum and max_sum inclusive. That's a necessary condition.

    But is it also sufficient? Not exactly, because there might be gaps due to integer steps? However with enough flexibility, we can achieve any integer between min_sum and max_sum, because we have multiple variables and can adjust by increments of 1. But we need to check if any integer in that range is achievable given each variable's domain [1, n] independently. This is like a bounded integer combination problem. Since each variable's contribution is s_i * x_i, and we can change x_i from 1 to n, the set of achievable sums might be contiguous if the ranges are large enough. I suspect that for this specific setting, with each variable able to take any integer between 1 and n, and many variables, the set of achievable sums is exactly the interval [min_sum, max_sum]. But we need to be careful: For a single variable with positive sign, achievable contributions are from 1 to n, so all integers. For negative sign, contributions are -1 to -n, i.e., all integers -1, -2, ..., -n. Then sum of multiple such sets is the Minkowski sum of intervals, which generally yields an interval if the step is 1 and the ranges cover all integers. More formally, if you have independent variables x_i ∈ [1, n] and the sum is ∑ a_i x_i where a_i = ±1, then the set of achievable sums is an interval of integers? Not always if there are both positive and negative coefficients? But since each coefficient is ±1, it's like sum of positive variables minus sum of negative variables. Let A = sum_{P} x_i, B = sum_{N} x_i. Then the sum is A - B. A ranges from P to Pn (any integer? Actually sum of P independent variables each from 1..n. The set of possible sums is from P to Pn, but not all integers are necessarily achievable? For P numbers each 1..n, the set of possible sums is all integers from P to Pn. This is because we can achieve any sum by taking some variables as 1 and one variable varying? Actually it's a classic: the set of sums of P numbers each between 1 and n inclusive is all integers between P and Pn. Reason: minimal sum is P, maximal is Pn. For any integer s in between, we can set all to 1 and then distribute s-P among the P variables, each can increase up to n-1. Since each can take at most n-1 extra, the total extra capacity is P(n-1). For any extra Δ = s-P with 0 ≤ Δ ≤ P*(n-1), we can greedily assign: assign min(Δ, n-1) to first variable, subtract, etc. This always works because Δ is within capacity, so we can achieve any sum. Similarly, B ranges from N to Nn. Now the overall sum is A - B, where A and B independent. The set of possible A-B is the set of differences of two sets S and T where S = [P, Pn] (all integers) and T = [N, Nn] (all integers). The difference set S - T = { a - b | a∈S, b∈T } = [P - Nn, Pn - N] (since min difference = min S - max T = P - Nn; max difference = max S - min T = Pn - N). And because S and T are intervals of integers, the set of differences is also an interval of integers (every integer between min and max is achievable). Is that always true? Yes, if S and T are intervals of integers, then S - T = { s-t | s∈S, t∈T } is also an integer interval from minS - maxT to maxS - minT, and it is "convex" (every integer in between is achievable). Reason: For any d in that range, we need s∈S, t∈T such that s - t = d. This is equivalent to s = d + t, where t ∈ T and d+t ∈ S. Since S and T are intervals, the condition is that there exists t such that t ∈ T and d+t ∈ S. The set of t that satisfy is T ∩ (S - d). Since S-d is an interval shifted, and T is an interval, their intersection is an interval (maybe empty). But does it always contain an integer for any d between the extremes? Let's check: For d_min = P - Nn, we can take s = P, t = Nn. For d_max = Pn - N, take s = Pn, t = N. For intermediate d, we can choose t = N (min T) and s = d+N; but s = d+N must be ≤ Pn and ≥ P. For d ∈ [P - Nn, Pn - N], we have d+N ∈ [P - Nn + N, Pn - N + N] = [P - N*(n-1), Pn]. But we need also s >= P. Lower bound: d+N >= P? d >= P - N? Actually d_min = P - Nn, so d_min+N = P - Nn + N = P - N(n-1) which is <= P (since N*(n-1) >=0). So it's possible that d+N could be less than P for d < P - N? Let's analyze: For d between P - Nn and P - N, d+N <= P? Example: n=5, P=3, N=2. Then P - Nn = 3 - 10 = -7; P - N = 1. For d= -5, then s = d+N = -5+2 = -3, which is less than P=3, not allowed. So that choice fails. But we could choose a different t. For d in that range, we might need to adjust. I think the difference of two integer intervals is indeed an integer interval; it's known that the sum/difference of intervals is an interval. More formally, the set of possible differences is { d | ∃ t such that t ∈ T and d+t ∈ S } = ∪_{t∈T} { d | d = s-t, s∈S } = { d | S ∩ (d+T) ≠ ∅ }. Since S and T are intervals, the condition that S ∩ (d+T) ≠ ∅ is equivalent to: the intervals overlap: [P, Pn] and [d+N, d+Nn] must intersect. Overlap exists iff P ≤ d+Nn and Pn ≥ d+N. So we need both conditions: d ≥ P - Nn (from P ≤ d+Nn => d ≥ P - Nn) and d ≤ Pn - N (from Pn ≥ d+N). So any integer d satisfying those two inequalities is possible. Is that enough to guarantee existence? For any d in that closed interval, there exists some t such that the intervals overlap? Actually if d satisfies those two inequalities, then the intervals [P, Pn] and [d+N, d+Nn] are both intervals, and the left endpoint of the second is d+N, right endpoint is d+Nn. For them to have non-empty intersection, we need max(P, d+N) ≤ min(Pn, d+Nn). That is exactly: we need P ≤ d+Nn AND d+N ≤ Pn. These are precisely the two inequalities we have. So for any d satisfying these, the two intervals have some overlap. Since they are integer intervals, there will be integer s and t such that s = t + d and both within bounds. But we need to be sure that we can pick integer s and t that are achievable as sums A and B. However A and B are not arbitrary integers in [P, Pn] and [N, Nn] respectively? Actually A is sum of P numbers each 1..n; the set of possible sums is exactly all integers from P to Pn (as argued). Similarly B is all integers from N to Nn. So indeed any integer in those ranges is achievable. Therefore for any d in [P - Nn, Pn - N], there exist integers A in [P, Pn] and B in [N, Nn] with A-B = d. Since the intervals are full, there exist such A,B. So the necessary and sufficient condition for existence is that n (the target sum) lies within [min_sum, max_sum] inclusive.

    But wait: There is also the constraint that each individual x_i ≤ n. That's already accounted for. Also, each x_i must be positive integer, which we used. So condition seems: if min_sum ≤ n ≤ max_sum, then possible. However, we need to also consider the case where there is only one variable: k=1. Then the expression is "? = n". Here sign is + (since first variable is positive). Then min_sum = 1, max_sum = n. So condition is 1 ≤ n ≤ n, always true because n≥1. So we can always assign x1 = n. That's fine. But the sample: "? = 1000000" output Possible, assign 1000000. Good.

    Second sample: "? - ? = 1". Here k=2, first sign +, second sign - (since operator before second is '-'). So P=1, N=1. Then min_sum = P - Nn = 1 - 1n = 1 - n. max_sum = P*n - N = n - 1. So interval is [1-n, n-1]. For n=1, interval is [0, 0]. But target n=1 is not in [0,0]? Actually 1 is not ≤ 0. So impossible. That matches sample.

    So condition appears correct.

    But wait, there is subtlety: The operators are between question marks. The expression is evaluated left to right, but we assumed it's equivalent to sum with signs as described. Since addition and subtraction are left-associative but also associative and commutative? Actually with only plus and minus, the left-associative evaluation yields the same as treating it as sum with signs. Because subtraction is not associative but with parentheses it's fine: (a - b) - c = a - b - c, and (a - b) + c = a - b + c. So indeed the coefficient of each variable is determined solely by the parity of preceding minuses? Actually for a sequence like a - b - c: first sign +, second sign -, third sign? operator before c is '-', so sign of c = -? But evaluate: (a - b) - c = a - b - c, so c has sign -, yes. So the rule is s_i = +1 for i=1, and for i>1, s_i = s_{i-1} * (1 if op_{i-1} is '+' else -1)? Not exactly, but simpler: s_i = +1 if number of minus signs before i is even? Actually since each minus toggles the sign? Let's derive: Starting with +. When we see operator op before variable i, the sign for variable i is the sign of the result of the previous operation? But easier: In expression x1 op1 x2 op2 x3 ... op_{k-1} xk, the standard interpretation is (((x1 op1 x2) op2 x3) ...). The sign of x_i can be computed as: sign_i = +1 if the number of '-' among op1..op_{i-1} is even, else -1? Let's test: x1: no operators, even (0) -> +. For x2: operator op1. If op1 is '-', then number of '-' = 1 (odd) -> sign = -? But we earlier said sign for x2 should be - if operator before is '-', yes. For x3: operators op1 and op2. Consider x1 - x2 + x3: operators: '-' then '+'. Number of '-' =1 (odd) -> sign should be? Evaluate: (x1 - x2) + x3 => x3 sign +. So odd gave +? That contradicts. Actually (x1 - x2) + x3: the sign of x3 is +. The number of '-' among op1 and op2? op1='-', op2='+'. Count of '-' = 1 (odd). But sign is +. So not simply parity. Because the plus does not toggle. Need to think differently.

    Wait, I think my earlier simple rule "s_i = +1 if operator before is '+', else -1" is correct for i>1. Let's test: For expression "? - ? + ?", operator before second is '-', so second sign = -1; operator before third is '+', so third sign = +1. That yields: x1 - x2 + x3. That's correct. For "? - ? - ?", operators: before second '-', before third '-'. So signs: first +, second -, third? According to rule: third sign = - (since operator before is '-'). That yields x1 - x2 - x3, which matches evaluation: (x1 - x2) - x3 = x1 - x2 - x3. Good. For "? + ? - ?", third sign = - (operator before is '-') gives x1 + x2 - x3, correct. For "? - ? + ? - ?", signs: +, -, +, -? Let's compute: x1 - x2 + x3 - x4 => signs: +, -, +, -; which matches rule: second sign = - (op1='-'), third sign = + (op2='+'), fourth sign = - (op3='-'). So rule is correct. So we can compute signs as: s1 = +1; for i>=2, s_i = +1 if operator i-1 is '+' else -1.

    Thus we can compute P = count of i with s_i=+1, N = count with s_i=-1.

    Now condition min_sum ≤ n ≤ max_sum.

    But is this condition also sufficient for existence given that each variable must be ≤ n? We argued that the set of achievable sums is exactly the interval [min_sum, max_sum]. However, we should verify that we can always construct such an assignment within the bounds, especially when there are many variables and large n. The argument using sums of independent variables is valid: For any desired sum d in that interval, we need to find A (sum of positive variables) and B (sum of negative variables) such that A - B = d, with A in [P, Pn], B in [N, Nn]. Then we need to break A into P numbers each in [1,n] and B into N numbers each in [1,n]. That is always possible if A and B are within the respective intervals and also A≥P and B≥N (obviously) and A≤Pn, B≤Nn. And we also need to consider that the numbers assigned to individual variables can be any integers 1..n, and the sum constraints are independent. So if we can find such A and B, we can then assign numbers to achieve those sums individually. The question: for a given A in [P, Pn], can we always represent it as sum of P numbers each between 1 and n? Yes, as argued: start with all ones, then distribute extra A-P among the P variables, each up to n-1. Since extra ≤ P(n-1), it's feasible. Similarly for B. So the problem reduces to finding A and B satisfying A - B = n, with P ≤ A ≤ Pn, N ≤ B ≤ Nn.

    Given that n is within [P - Nn, Pn - N], such A and B exist. But we need to also ensure that the chosen A and B are integers (they are). So we can simply pick some feasible pair. For instance, we can try to set B to its minimum N, then set A = n + B = n + N. Then we need to check if A ≤ Pn and A ≥ P. So we require P ≤ n+N ≤ Pn. This condition is equivalent to n ≤ Pn - N and n ≥ P - N. But we know n is within [P - Nn, Pn - N], which is a larger range. But n+N might exceed Pn? Let's check. Since n ≤ max_sum = Pn - N, we have n+N ≤ Pn, so A = n+N ≤ Pn. Also we need A ≥ P. That requires n+N ≥ P => n ≥ P - N. But is it guaranteed that n ≥ P - N? Not necessarily. For example, consider P=1, N=5, n= -? Actually n positive, but P - N might be negative if N > P, then n ≥ negative always true since n positive. If N=0 then P - N = P, so need n ≥ P. But if n is less than P? Let's test: Suppose expression: "? + ? + ? = 1" (three plus signs). Then P=3, N=0. min_sum = 3, max_sum = 3n = 3 (since n=1? Actually n=1, max_sum = 31=3). So min_sum=3, max_sum=3, so only sum=3 possible, but target n=1 not in range, so impossible. That's fine. But suppose we have P=3, N=1, n=2? Let's compute min_sum = P - Nn = 3 - 1n = 3 - n. For n=2, min_sum=1. max_sum = Pn - N = 32 - 1 = 5. So n=2 is in [1,5]. So condition satisfied. Now try B=N=1, then A = n + B = 3. Need A between P=3 and Pn=6, okay. So feasible. So set B=1 (i.e., the single negative variable must be 1). That works. But what if we had P=1, N=2, n=1? Then min_sum = 1 - 21 = -1, max_sum = 11 - 2 = -1, so n=1 not in [-1,-1]? Actually max_sum = -1, min_sum = -1, so only -1 possible, so impossible. So fine. For cases where B=N is too small? Actually B=N means each negative variable set to 1. But if N>0 and n is large, it's okay. But what if n is very small relative to P? Consider P=5, N=0, n=1. Then min_sum=5, max_sum=5*n=5, but n=1 is not within [5,5], impossible. So condition fails. So if condition holds, we need to find A and B that work. Many choices: We can set B to some value, then A = n + B. The constraints are:

    B ∈ [N, Nn] and also A = n+B ∈ [P, Pn] → P ≤ n+B ≤ Pn → B ∈ [P - n, Pn - n].

    So we need B to be in the intersection of [N, Nn] and [max(N, P - n), min(Nn, Pn - n)]? Actually more systematically: pick B = N (minimum) if that satisfies A ≤ Pn. Condition: n+N ≤ Pn => n ≤ Pn - N, which is true because n ≤ max_sum = Pn - N. Also need A ≥ P: n+N ≥ P? This is n ≥ P - N. If this fails, we can increase B to raise A? Actually A = n+B, if B increases, A increases, so to satisfy A ≥ P we might need B ≥ P - n. Since n may be less than P - N? But if n < P - N, then P - n > N. So B must be at least P - n > N. So we need B to be at least max(N, P - n). Also B cannot exceed Nn, and also A ≤ Pn gives B ≤ Pn - n. So we need an integer B in [max(N, P - n), min(Nn, Pn - n)]. Since we know a solution exists, this interval should be non-empty. So we can compute B = max(N, P - n) and check if it's ≤ min(Nn, Pn - n). Then set A = n+B. This gives a feasible pair.

    But we might also consider the alternative: set A = P (minimum) and then B = A - n = P - n. That would require B ≥ N and B ≤ N*n. So that gives B = P - n, but if P - n < N, then not feasible. But we can adjust. So the above method should work.

    Now once we have target sums A and B, we need to assign actual numbers to variables: for positive group, we need to assign P numbers each in [1,n] summing to A; for negative group, N numbers each in [1,n] summing to B.

    We also need to output the specific numbers in the order of question marks. So after constructing groups, we assign them to the appropriate positions.

    Thus algorithm:

    1. Parse input string. It consists of tokens: "?" separated by operators '+' or '-', then "=", then integer n. There can be spaces.

    Simplify: Read line, split by spaces? But tokens may be separated by spaces, e.g., "? + ? - ? = 42". So we can split into tokens by whitespace. Then we process tokens: they will be either "?", "+", "-", "=", or a number. The rebus pattern: first token is "?", then alternating operator and "?" until "=" appears, then n. But there could be multiple operators? Yes. So we can extract the sequence: start with a "?", then for each operator before the next "?".

    We'll build arrays: signs list where we'll set s[0]=+1. Also we'll note the operators in order. The number of question marks k is count of "?" tokens. The operators count = k-1, tokens of "+" or "-". So we can iterate over tokens, ignoring spaces. But it's easier: read line, then replace " +" with "+", " -" with "-", " = " with "=", then split? But simpler: we can just loop through characters? However tokens are separated by spaces, but could there be no spaces? The problem says: "all letters and integers are separated by spaces". So there are spaces between tokens. So we can split by spaces and get a list of tokens.

    For example: "? + ? - ? + ? + ? = 42" tokens: ["?", "+", "?", "-", "?", "+", "?", "+", "?", "=", "42"]. Good.

    Thus we can parse:

    tokens = input().split() We'll have a list. We'll iterate index i=0; let signs = []; ops = []; We'll process:

    The first token should be "?"; signs.append(1); Then i=1; while tokens[i] != "=": op = tokens[i] # either '+' or '-' i+=1 next_token = tokens[i] # should be '?' i+=1 signs.append(1 if op == '+' else -1) ops.append(op) # maybe not needed after signs are computed.

    Then after loop, token[i] is "="; i+=1; n = int(tokens[i]).

    Now we have k = len(signs). Let P = count of +1, N = count of -1.

    Compute min_sum = P1 - Nn = P - Nn. Compute max_sum = Pn - N1 = Pn - N.

    If n < min_sum or n > max_sum: print "Impossible" and exit.

    Otherwise: We need to assign numbers.

    Plan: Choose B (sum of negative variables) appropriately.

    Let sum_neg_target = B, sum_pos_target = A = n + B.

    We need to choose B such that:

    • B_min = N (if N>0 else 0; but if N=0, then B must be 0 and we only have positive group; we can handle separately.)
    • B_max = N*n (if N>0 else 0)
    • A_min = P
    • A_max = P*n

    Given A = n + B, constraints become: B ≥ P - n? Actually from A ≥ P => n+B ≥ P => B ≥ P - n. And from A ≤ Pn => B ≤ Pn - n.

    So B must satisfy:

    lower = max(N, P - n) upper = min(Nn, Pn - n)

    If N=0, then B is forced to be 0. The constraint becomes: B=0 must satisfy B ≥ P - n? That is 0 ≥ P - n => n ≥ P. Also B ≤ Pn - n => 0 ≤ Pn - n which holds if n ≤ Pn - n? Actually 0 ≤ Pn - n is n(P-1) ≥ 0, true if P≥1 or n=0? n>0, P≥1. So the main condition is n ≥ P. But also from overall condition n ≤ max_sum = Pn - 0 = Pn, and n ≥ min_sum = P - 0 = P, so indeed n ≥ P is required. So for N=0, condition simplifies to n >= P, which matches min_sum = P and max_sum = P*n, so n must be at least P. That's consistent.

    If N>0, we need to find B in that interval. Since we know solution exists, the interval is non-empty. We can set B = lower (or any value). Let's choose B = max(N, P - n). However, we also need to ensure that B ≤ Nn and B ≤ Pn - n. Since existence guarantees that lower ≤ upper. So we can set B = lower. But wait: lower = max(N, P - n). If N is large, lower might be N. If P - n is larger, lower = P - n. We need to be careful about case where N=0, we handle separately.

    Now we need to assign numbers to positive group (size P) that sum to A = n + B, each between 1 and n. Similarly negative group (size N) sum to B, each between 1 and n.

    We also need to output in the original order. So we'll create an answer list of numbers for each variable in order. We'll assign the numbers from the positive group and negative group accordingly.

    Approach for splitting sum into bounded numbers:

    Given size s (number of variables) and total sum target T, with each variable in [1, n], and we need to produce some distribution. This is always possible if s ≤ T ≤ sn. We can use greedy: start with all ones, then distribute the remainder R = T - s among the variables, adding up to at most n-1 per variable. For each variable, add inc = min(R, n-1), R -= inc. This works as long as R ≤ s(n-1). Since T ≤ sn, R = T - s ≤ s(n-1). So okay.

    We'll compute list for positive group: start with all 1's of length P. remainder = A - P. For i in range(P): add = min(remainder, n-1); value_i = 1 + add; remainder -= add. Since remainder initially ≤ P*(n-1), this fills exactly, after loop remainder becomes 0. Similarly for negative group: values all 1, remainder = B - N; distribute.

    But careful: B might be less than N? No, B ≥ N, so B - N ≥ 0. Also B ≤ Nn, so remainder ≤ N(n-1).

    Now assign to positions: iterate over signs; if sign = +1, take next number from positive list; if -1, take from negative list.

    Output: we need to print the rebus with numbers in place of '?', preserving operators and spaces. The sample output shows: "9 + 13 - 39 + 28 + 31 = 42". So we should output: first number, then space, operator, space, number, ... with proper spacing. The original format: tokens separated by spaces. So we can reconstruct: the first token is the first number; then for each subsequent variable, we output the operator and then the number. Finally "=" and n. So we can build output string: parts = [] ; parts.append(str(nums[0])); for i in range(1, k): parts.append(ops[i-1]) # operator; parts.append(str(nums[i])); then parts.append("="); parts.append(str(n)). Then print " ".join(parts). But note the original input may have spaces exactly as shown, but the problem doesn't require preserving exact spacing; just output in that format: numbers and operators separated by spaces, and "=" with spaces around. That's typical.

    Thus solution appears straightforward.

    But we must also consider edge cases: N=0 or P=0? Could there be no positive signs? The first variable always has positive sign per expression? Actually the first variable always has positive sign because it's not preceded by any operator. So P≥1. Could N=0? Yes, if all operators are '+', then N=0. Then we have only positive group. Condition: n must be between P and P*n. If n < P, impossible. Example: "? + ? = 2": P=2, min_sum=2, max_sum=2n (n=2?), actually target n=2, min_sum=2, max_sum=4, so possible. But "? + ? = 1": P=2, min_sum=2, so impossible. That makes sense: sum of two positive ints from 1 to n (n=1) can't be 1 because min sum is 2. So output Impossible.

    Now consider P=0? Not possible because first variable is positive.

    But what if there is only one variable? N=0, P=1, condition: 1 ≤ n ≤ n, always true, assignment: x1=n.

    Now consider negative signs only? That would require first variable positive, then subsequent negative. So there will be at least one positive.

    Now verify condition with sample 1: "? + ? - ? + ? + ? = 42". Let's compute signs: +, +, -, +, + (since operators: +, -, +, +). So P=4 (positions 1,2,4,5), N=1 (position 3). n=42. min_sum = P - Nn = 4 - 142 = -38. max_sum = Pn - N = 442 -1 = 168 -1=167. So 42 is within. So possible. Our assignment method: B = sum of negatives (just one variable). Choose B = max(N, P - n) = max(1, 4-42= -38) = 1. Check upper: min(Nn=42, Pn - n = 4*42-42=168-42=126) = 42. So B=1 ok. Then A = n+B = 43. Need positive sum 43 with P=4 numbers each 1..42. 4 ≤ 43 ≤ 168, ok. Positive numbers: all ones, remainder 43-4=39. Distribute: n-1 = 41, so we can add 39 to one variable: values: [40,1,1,1] but need to assign to positive positions (4 variables). But we have 4 positive positions: we can assign any distribution. However, we also have negative variable: target B=1, so its value is 1. The sample solution: 9 + 13 - 39 + 28 + 31 = 42. Their negative variable (third) is 39, not 1. That's different: they used negative variable value 39, positive sum = 9+13+28+31 = 81, negative sum = 39, difference 81-39=42. Here B=39, A=81, A-B=42. So B=39 is also valid. Our method could have chosen B=1, but that yields positive sum 43, negative 1. But are we able to achieve positive sum 43 with numbers up to 42? Yes, 43 with 4 numbers each ≤42: possible? For example, [1,1,1,40] all ≤42? 40 <=42 okay. But we must also ensure that each variable ≤ n (42). 40 is okay. So our assignment would be: positive variables: maybe 40,1,1,1, negative variable:1. Then expression: let's assign order: signs: + + - + +. We need to assign numbers to positions: we have 4 positive numbers: we need to place them at indices with sign +. We have a list of positive values, and negative list. We can assign the large 40 to one of the positive positions. But then evaluate: e.g., numbers: first ?=40, second ?=1, third ?=1, fourth ?=1, fifth ?=1? Wait negative variable is third? Actually sign pattern: positions: 1:+,2:+,3:-,4:+,5:+. So negative is position 3, positive are 1,2,4,5. Our negative list = [1]. Positive list = [40,1,1,1] (if we assign remainder 39 to first positive). Then expression: 40 + 1 - 1 + 1 + 1 = 42? Compute: 40+1=41, -1 =40, +1=41, +1=42. Yes! So 40+1-1+1+1=42 works. But the sample uses 9+13-39+28+31=42, which is more balanced. Our assignment is also valid, but is there any issue? 1 is allowed (positive integer from 1 to n). So we could output that. However, note that we must output the numbers in the order corresponding to the positions. Our assignment yields negative variable =1, which is positive integer 1. That's fine.

    But is there any constraint that all numbers must be from 1 to n, inclusive? Yes, and 1 is fine. So our solution is valid.

    But wait: Our method set B = max(N, P - n). In this case, P - n = 4-42 = -38, so B = N = 1. That's okay. However, we must also check if the resulting positive sum A = n+B = 43 is ≤ Pn = 168, yes. Also A ≥ P =4. So it works. However, is it always valid to assign positive numbers with sum A? Yes if A ≤ Pn. But A = n+B, and B ≥ N ensures A = n+B ≥ n+N. Is it always ≤ Pn? Since B ≤ Nn, A ≤ n + Nn = n(N+1). But we need A ≤ Pn, i.e., n(N+1) ≤ Pn => N+1 ≤ P => P ≥ N+1. But is it always true that P >= N+1? Since first sign is always positive, and each minus toggles? Not necessarily: consider pattern: ? - ? - ? - ? ... we could have many negatives. For k=3, signs: +, -, -? Actually expression: ? - ? - ? yields signs: +, -, -. So P=1, N=2. So P =1, N=2, then P < N+1? N+1=3, P=1, not true. In that case, with B=N, A = n+N. For P=1, N=2, n some value. Then A = n+2, and Pn = n. So we need A ≤ Pn => n+2 ≤ n => impossible. So setting B=N would not work. That means our simple choice B = max(N, P - n) might need to be larger than N to satisfy A ≤ Pn. Indeed in the constraint for B we have B ≤ Pn - n. So if N > Pn - n, then B = N would be too large. In that case we need to pick B = Pn - n maybe? But must also satisfy B ≥ N? If N > Pn - n, then lower bound N is greater than upper bound P*n - n, which would mean no solution? But existence condition ensures there is some B. Let's analyze case P=1, N=2.

    Take example: "? - ? - ? = n". P=1, N=2. Condition: min_sum = P - Nn = 1 - 2n. max_sum = Pn - N = n - 2. So we need n to satisfy 1-2n ≤ n ≤ n-2? That upper bound is n-2, which is less than n for n>0. So we need n ≤ n-2 which is false unless maybe negative? For n=1: min_sum = 1-2= -1, max_sum = 1-2= -1, so n=1 not equal -1 -> impossible. For n=2: min_sum = 1-4= -3, max_sum = 2-2=0, n=2 not ≤0 -> impossible. For any n>0, max_sum = n-2, which is < n for n>0. So impossible for any positive n? Check n=3: max_sum =1, not ≥3. So indeed no solution for such pattern? Let's test manually: ? - ? - ? = n. With positive numbers between 1 and n. Let x - y - z = n => x = n + y + z. Since x ≤ n, the only way is n + y + z ≤ n => y+z ≤ 0, impossible because y,z≥1. So indeed no solution. So condition indicates impossible. So for feasible cases, we must have P*n - n ≥ N? Let's derive from feasibility condition.

    Given that min_sum ≤ n ≤ max_sum. For case P=1,N=2, min_sum = 1 - 2n, max_sum = n - 2. For n to be ≥ min_sum, automatically; but we also need n ≤ max_sum => n ≤ n-2 => impossible unless n is negative. So indeed no feasible n. So if the inequality n ≤ max_sum holds, then we have n ≤ Pn - N => rearr: n + N ≤ Pn => Pn - n ≥ N => upper bound for B is Pn - n, and that must be at least N to have B≥N possible? Actually we need existence of B such that B ≥ N and B ≤ Pn - n. So a necessary condition is N ≤ Pn - n. This is equivalent to n ≤ Pn - N => n ≤ max_sum, which is exactly the upper bound condition. So if n ≤ max_sum, then N ≤ Pn - n? Let's check: n ≤ max_sum = Pn - N => Pn - n ≥ N. Yes, that's equivalent. So from n ≤ max_sum we get Pn - n ≥ N. So the upper bound for B is at least N. Similarly from n ≥ min_sum = P - Nn, we get n ≥ P - Nn => n + Nn ≥ P => n*(N+1) ≥ P =>? Actually n ≥ P - Nn => n + Nn ≥ P => n*(N+1) ≥ P. That's another condition. But this is automatically satisfied if n ≥ min_sum. So existence gives us N ≤ Pn - n and also P ≤ n(N+1) (since min_sum condition). So the interval [max(N, P - n), min(Nn, Pn - n)] is non-empty. Indeed, we can compute B = max(N, P - n). But we need to ensure B ≤ min(Nn, Pn - n). We'll compute lower and upper. If lower > upper, then maybe no solution, but existence should guarantee lower ≤ upper. However, due to rounding issues with integers, it's fine.

    But in our earlier example with P=1,N=2, min_sum condition fails because n is too small? Actually let's test with n large: P=1,N=2. min_sum = 1 - 2n, which is negative; max_sum = n-2. For n=100, max_sum=98, so n=100 > 98, fails. So indeed no n works. So for any feasible case, lower ≤ upper.

    Now the question: in the feasible case, can we always pick B = max(N, P - n) and it will be ≤ min(Nn, Pn - n)? We need to prove that. Since existence holds, we know there exists some B. But does it guarantee that the lower bound is ≤ upper bound? Yes, because lower = max(N, P - n) and upper = min(Nn, Pn - n). Existence of any B implies that there is some integer B meeting N ≤ B ≤ Nn and P - n ≤ B ≤ Pn - n. That implies the intervals [N, Nn] and [P - n, Pn - n] have non-empty intersection. The leftmost point of the intersection is max(N, P - n). The rightmost is min(Nn, Pn - n). So existence implies max(N, P - n) ≤ min(Nn, Pn - n). So we can safely set B = max(N, P - n). That should work.

    Edge case: If N=0, then we need to treat separately because B is forced 0. For N=0, constraints become: B=0, and we need A = n. And also need P ≤ n ≤ P*n. So we just assign positive numbers to sum to n. Our algorithm can still work: we can set B = max(0, P - n). But B must be 0, but if P - n > 0, then max(0, P - n) > 0, but B cannot be >0 because there are no negative variables. Actually if N=0, we have no negative group, so B is not defined. So we should handle N=0 separately. However, our interval approach for B is meaningless because B must be exactly 0, and we need to check that n ≥ P (since min_sum = P). So if N=0 and n ≥ P, we can assign positive numbers to sum to n. So we can just treat that case.

    But we can unify: If N>0, compute B = max(N, P - n). Then A = n + B. Check that A ≤ P*n (should hold). For N=0, we just assign A = n and ensure n ≥ P.

    However, note that our earlier derivation for lower bound includes P - n possibly negative; but for N=0, we don't have a B. So better to separate.

    Alternatively, we can treat the general case by considering we need to assign numbers to all variables directly without splitting into sums. Perhaps easier: we can start from all ones, then adjust the sum to target by increasing positive variables or negative variables appropriately. But we already have a constructive method.

    Let's test with a feasible but edge case: P=1,N=1 (like "? - ? = n"). Condition: min_sum = 1 - n, max_sum = n - 1. So feasible if n ≤ n-1? Actually max_sum = n-1, so n must be ≤ n-1 which is false unless n-1 ≥ n => impossible. So no n satisfies. Indeed impossible for all n>0. So algorithm would output Impossible.

    But consider "? + ? - ? = n" with n=2. P=2,N=1. min_sum = 2 - n = 2-2=0? Wait min_sum = P - Nn = 2 - 1n = 2 - n. For n=2, min_sum=0. max_sum = Pn - N = 22 -1 =3. So 2 in [0,3] feasible. Our method: N=1, P=2, n=2. B = max(N, P - n) = max(1, 2-2=0) =1. Then A = n+B = 3. Positive group sum=3 with 2 numbers each ≤2. 2 numbers from 1..2 sum to 3: possible as (1,2) or (2,1). Negative group sum=1 with 1 number =1. So assignment: e.g., 2 + 1 - 1 = 2? Actually we need order: signs: +, +, -. Let positive positions (first two) numbers: maybe 2 and 1, negative position (third) 1: expression: 2 + 1 - 1 = 2. Works. Good.

    Another feasible case: P=1,N=1? Actually we saw it's impossible. So fine.

    Now consider case where P - n > N. Example: P=10, N=1, n=5. Then min_sum = 10 - 15 =5, max_sum = 105 -1 =49, so feasible (n=5). P - n = 10-5=5, N=1, so max(N, P - n)=5. B=5. Then A = n+B = 10. Positive group sum=10 with 10 numbers each ≤5: min sum =10, max sum=50, so achievable (all ones => sum=10 exactly). Negative group sum=5 with 1 number: must be 5 (≤5). So assignment: all positive ones, negative 5. That yields 1+1+... (10 positives) -5 = 10-5=5. Works.

    Now consider P=10,N=2,n=5. min_sum = 10 - 25=0, max_sum=105 -2=48, feasible. P - n =5, N=2, lower = max(2,5)=5. B=5. Then A = n+B=10. Positive sum=10 (10 numbers, all ones). Negative sum=5 (2 numbers, each 1..5). Need two numbers sum to 5, each ≤5, min sum 2, max sum 10. Can be (1,4) etc. So assign negative numbers e.g., 2 and 3? But careful: we need to assign numbers ≤ n=5. That's fine.

    Now consider case where N*n is small relative to P - n? But existence ensures it's okay.

    Thus the constructive algorithm seems correct.

    Now we must also check that after assigning numbers, each number is ≤ n. In our distribution method, for positive group we assign numbers starting from 1 and add up to n-1 extra. Since remainder ≤ P*(n-1), each value after addition is at most 1 + (n-1) = n. So valid. Similarly negative group.

    Now we need to output "Possible" and the rebus.

    Edge Cases: n might be very large, up to 1e6, and variables up to 100, so numbers up to 1e6. That's fine.

    Now verify with sample 2: "? - ? = 1". P=1,N=1, min_sum=1-11=0? Actually n=1: min_sum = 1 - 1 = 0? Wait N=1, n=1: min_sum = P - Nn = 1 - 11 = 0. max_sum = Pn - N = 1*1 -1 =0. So interval [0,0] includes n=1? n=1 is not 0. So impossible. Our algorithm would output Impossible. Good.

    Now check sample 3: "? = 1000000". P=1,N=0, n=1000000. min_sum=1, max_sum=1*1000000=1000000, so feasible. Output "Possible" and "1000000 = 1000000". Good.

    Now we should test some other cases.

    But is there any scenario where the condition min_sum ≤ n ≤ max_sum is sufficient but our constructive assignment may fail because we need to assign numbers to both groups but we may need to ensure that the numbers assigned to the positive group do not conflict with the ordering? No, ordering doesn't matter; we just assign arbitrary numbers from each group to the positions with that sign. So any distribution works.

    Thus solution is straightforward.

    But wait, we must also consider that numbers must be from 1 to n inclusive. Our assignment ensures that.

    One more nuance: The expression is evaluated as integer arithmetic with left-to-right operations, but we have treated it as sum of signed variables. This is correct because addition and subtraction are left-associative and equivalent