Skip to content
TheChatArchiveThe Chat Archive
DeepSeekDeepseek v3.2· deepseekHugging Face Frontier Reasoning Traces

You are given a non-empty string s=s1s2... sn, which consists only of lowercase Latin…

  1. User

    You are given a non-empty string s=s_1s_2... s_n, which consists only of lowercase Latin letters. Polycarp does not like a string if it contains at least one string "one" or at least one string "two" (or both at the same time) as a substring. In other words, Polycarp does not like the string s if there is an integer j (1 ≤ j ≤ n-2), that s_{j}s_{j+1}s_{j+2}="one" or s_{j}s_{j+1}s_{j+2}="two".

    For example:

    • Polycarp does not like strings "oneee", "ontwow", "twone" and "oneonetwo" (they all have at least one substring "one" or "two"),
    • Polycarp likes strings "oonnee", "twwwo" and "twnoe" (they have no substrings "one" and "two").

    Polycarp wants to select a certain set of indices (positions) and remove all letters on these positions. All removals are made at the same time.

    For example, if the string looks like s="onetwone", then if Polycarp selects two indices 3 and 6, then "onetwone" will be selected and the result is "ontwne".

    What is the minimum number of indices (positions) that Polycarp needs to select to make the string liked? What should these positions be? Input

    The first line of the input contains an integer t (1 ≤ t ≤ 10^4) — the number of test cases in the input. Next, the test cases are given.

    Each test case consists of one non-empty string s. Its length does not exceed 1.5⋅10^5. The string s consists only of lowercase Latin letters.

    It is guaranteed that the sum of lengths of all lines for all input data in the test does not exceed 1.5⋅10^6.

    Output

    Print an answer for each test case in the input in order of their appearance.

    The first line of each answer should contain r (0 ≤ r ≤ |s|) — the required minimum number of positions to be removed, where |s| is the length of the given line. The second line of each answer should contain r different integers — the indices themselves for removal in any order. Indices are numbered from left to right from 1 to the length of the string. If r=0, then the second line can be skipped (or you can print empty). If there are several answers, print any of them.

    Examples

    Input

    4 onetwone testme oneoneone twotwo

    Output

    2 6 3 0

    3 4 1 7 2 1 4

    Input

    10 onetwonetwooneooonetwooo two one twooooo ttttwo ttwwoo ooone onnne oneeeee oneeeeeeetwooooo

    Output

    6 18 11 12 1 6 21 1 1 1 3 1 2 1 6 0

    1 4 0

    1 1 2 1 11

    Note

    In the first example, answers are:

    • "onetwone",
    • "testme" — Polycarp likes it, there is nothing to remove,
    • "oneoneone",
    • "twotwo".

    In the second example, answers are:

    • "onetwonetwooneooonetwooo",
    • "two",
    • "one",
    • "twooooo",
    • "ttttwo",
    • "ttwwoo" — Polycarp likes it, there is nothing to remove,
    • "ooone",
    • "onnne" — Polycarp likes it, there is nothing to remove,
    • "oneeeee",
    • "oneeeeeeetwooooo".
  2. DeepSeek Assistant

    We need to solve the problem: given string s, we can delete a set of indices (simultaneously) to remove all substrings "one" and "two". We want the minimum number of deletions, and output the indices.

    We are to process up to t=1e4 test cases, total length up to 1.5e6.

    We need to design an algorithm that computes the minimal deletions.

    Observation: The forbidden patterns are overlapping substrings "one" and "two". The problem is similar to removing occurrences of these patterns by deleting minimal characters. We can delete characters to break all occurrences.

    This is a classic problem: remove "one" and "two" substrings by deleting minimal characters. Since patterns length 3, and we want to minimize deletions. Greedy approach often works: scan and when we find a forbidden substring, delete a character to break it, ideally one that also breaks overlapping future ones.

    But need to prove minimal. This problem appears on Codeforces: problem "1320A? Actually 1367C? I recall a problem: "Remove 'one' and 'two' from string" maybe "1367C Social Distance"? No. It's maybe "B. Remove 'one' or 'two'?" Actually there's a Codeforces problem: "1367B" no. Searching memory: There is CF Round #1442? I'm not sure.

    But I recall a problem "1462C" no. Let's think.

    We have two patterns: "one" and "two". They share characters? They share "o"? Actually "one" has 'o','n','e'; "two" has 't','w','o'. Overlap possible: The string "twone" has both "two" at indices 1-3 and "one" at indices 3-5? Let's see: "twone": positions: 1:'t',2:'w',3:'o',4:'n',5:'e'. So substring "two" at 1-3: t w o -> yes; substring "one" at 3-5: o n e -> yes. So they overlap on the middle 'o'. Deleting that single 'o' (position 3) would break both patterns at once. So optimal solution sometimes deletes one character to kill two birds.

    Similarly, there might be overlapping "one" and "one" if they overlap? "oneone": first at 1-3, second at 4-6? Actually overlapping "one" can overlap like "one"? The pattern "one" length 3. Two occurrences can overlap if s = "one"? Overlap would require "ne"? For "one", the only possible overlapping is if suffix of pattern matches prefix. Prefix: 'o' ; suffix: 'e'? Actually the pattern "one" does not have a proper prefix that is also suffix (except trivial). So overlapping occurrences can only occur with offset 3 (no overlapping characters) or maybe if we have "onene"? Let's see: positions: "onene": 1-3: one; 3-5? characters 3,4,5: e? Actually 3 is 'e'? No, "onene": o n e n e; so 1-3 = one; 2-4 = n e n? no; 3-5 = e n e? no. So "one" cannot overlap with itself in a way that shares more than one character? Actually overlapping by 2 would require that the last two letters of one become the first two of the next: "ne"? But the pattern starts with "on", so not. Overlapping by 1: the last character 'e' equals first 'o'? no. So self-overlap is impossible. So "one" occurrences are non-overlapping (except maybe separated by 0? Actually they could be adjacent: indices 1-3 and 4-6 share no characters). So simple.

    Similarly, "two": pattern "two" also doesn't self-overlap.

    However, the overlapping between "one" and "two" occurs in "twone" where they share the 'o'. Also "one" and "two" can overlap in other ways? Example: "tone"? positions: t o n e. There's "one" at 2-4, and "two"? need t w o, no. So only the specific case: "twone" where we have "two" followed by "one" overlapping at the 'o'? Actually it's exactly that: "two" ending at index i, then "one" starting at i? Let's formalize: Suppose we have "two" at positions i,i+1,i+2 (i to i+2) with s[i]='t', s[i+1]='w', s[i+2]='o'. Then for "one" to start at i+2, we need s[i+2]='o', s[i+3]='n', s[i+4]='e'. So the combined pattern is "twone". Conversely, "one" could be followed by "two"? That would require "one" at i,i+1,i+2: o,n,e, and then "two" starting at i+2? That would need s[i+2]='o', but s[i+2]='e', so not possible. So only overlapping pattern is "two" immediately followed by "one" with overlapping 'o', i.e., "twone". Also could "one" be immediately before "two"? That would be "onetwo": positions: "one" at i,i+1,i+2 (o,n,e), "two" at i+2,i+3,i+4 would require s[i+2]='t'? but s[i+2]='e', so no. So only "twone".

    But what about overlapping with a gap? e.g., "one...two"? Not overlapping. So only special overlapping case.

    Thus, the problem reduces to: We have to delete characters so that no "one" or "two" remains. Equivalent to covering all occurrences of these patterns with deletions of characters; we want minimal deletions. Since each occurrence must be "broken". The patterns are length 3, and they are not overlapping except the special case where "two" and "one" share the middle character in "twone". Also there could be adjacent occurrences like "two" at indices 1-3 and "one" at indices 4-6? Not overlapping but they could be close. However, if we delete a character to break one, it may affect others.

    A greedy approach that scans and when encountering a forbidden substring deletes the middle character is often optimal. But careful with overlapping "twone": deleting the shared 'o' breaks both. So we need to detect "twone" and delete the middle 'o' (which is the third character of "two" and first of "one"). This yields 1 deletion for both patterns.

    But is there any scenario where deleting something else yields better? For "twone", deleting 'o' is optimal. Could we delete two characters (like 't' and 'n' etc) and still get only 1? No, so 1 is minimal.

    What about separate occurrences that are not overlapping? For a standalone "one", we can delete any one of its three characters to break it. Typically deleting the middle 'n' is good because it doesn't affect potential "twone" pattern? Actually in "one", the middle character is 'n', and it's not part of "two" pattern. Deleting 'n' would break "one". Also could delete 'o' or 'e'. But if we delete 'o', we might also break a preceding "two"? For instance if we have ..."two" then "one"? That's exactly "twone": if we delete the 'o' (which is the overlapping character), it breaks both. So in "twone", deleting 'o' is optimal. For a standalone "one" not part of a "twone", any deletion is fine.

    Similarly for standalone "two", deleting any character. Usually deleting the middle 'w' is typical, but also 'o' could be part of overlapping "twone"? If we have "twone", the 'o' is the third character of "two", so if we treat "two" separately we might consider deleting 'w'? But then "one" remains. So we need to handle overlapping.

    Thus algorithm: Scan the string for patterns "twone". When we find "twone" at positions i..i+4 (i indexing from 1, with s[i]='t', i+1='w', i+2='o', i+3='n', i+4='e'), we can delete the character at position i+2 (the 'o') to break both. Then we skip ahead to after this pattern to avoid double counting.

    After handling all "twone" occurrences, then handle remaining "one" and "two" occurrences separately. Since we removed the overlapping cases, the remaining occurrences of "one" and "two" are non-overlapping with each other? They could still be adjacent? For "one" and "one" can be adjacent but not overlapping; after we delete the middle of one, we might break the next if they share a character? Since they don't overlap, deleting a character from one won't affect another unless they share that character (adjacent: "one" ends at i+2, next "one" starts at i+3, so characters are distinct). So we can treat them independently: for each isolated "one", delete the middle character ('n') or any; similarly for "two", delete the middle character ('w').

    But careful: Could there be a situation where after removing "twone", there is a leftover "one" that overlaps with something else? Not really because the only overlap is "twone". Also could "two" and "one" appear with overlap not exactly "twone"? The only overlapping is that "two" ends with 'o', and "one" starts with 'o', so overlapping by one character. That is exactly "twone". So yes.

    Thus algorithm: find all indices where s[i:i+5] = "twone". For each such occurrence, add index i+2 (0-indexed? careful: problem indices start from 1) to removal list, and then skip ahead 5 positions (i.e., set i += 5) to avoid considering subpatterns inside the same region.

    Then, for the rest of the string (or we can continue scanning but ignoring those already processed), find occurrences of "one" that are not overlapping with already removed indices? Actually we have not removed characters yet; we are just selecting indices to remove. When we skip ahead after handling "twone", we need to ensure that the characters we might consider later for "one" or "two" are not part of an already handled "twone". Since we will delete the middle 'o' of that "twone", the pattern "one" inside it would be broken automatically (the 'o' is removed). Also the "two" would be broken. So it's safe to skip the whole region because we are not going to consider those as separate occurrences. But we need to be careful if we skip only 5 characters, the next scan starting from i+5 may include characters that were part of the original pattern but after removal they might not form new patterns? Actually after we delete the 'o', the string becomes "t w (removed) n e" -> effectively "twne". That string may contain new pattern? "twne" does not contain "one" (since need "one") or "two"? Could it contain "two"? No. So safe.

    Thus after handling "twone", we scan for "one" and "two". But we need to ensure that these "one" and "two" are not overlapping with previously handled "twone" regions, because those are already taken care of. So we can just scan the string linearly, and when we encounter "twone", we treat it and skip. For the rest, we treat "one" and "two". But careful: The patterns "one" and "two" may be part of a "twone" but we skip it because we won't detect them separately if we first find "twone" and then skip ahead.

    Implementation details: We'll parse the string from index 0 (0-indexed). We'll maintain a list of indices to remove (1-indexed positions). We'll scan i from 0 to n-3.

    Pseudo:

    removals = [] i = 0 while i <= n-5: if s[i:i+5] == "twone": removals.append(i+2+1) // since i+2 is 0-indexed, convert to 1-indexed by +1 i += 5 continue i++?

    But if we skip ahead, we may miss patterns that start inside the skipped region? Because we skip 5 positions, meaning we move i to i+5. That's after the whole "twone". But what about patterns that start at i+1, i+2, i+3, i+4? Those would be inside the "twone" region, but we already decided to remove the middle 'o', thus those patterns would be broken anyway. So it's safe to skip them because we don't need to remove any more. So we can skip to i+5.

    But what about patterns that overlap with the "twone" but start at i+3? For example, after deleting the 'o', would a pattern "one" starting at i+3? Actually "twone": indices 0:t,1:w,2:o,3:n,4:e. If we delete index 2 (0-indexed), the remaining characters are at positions 0,1,3,4. The substring from index 3? But if we skip to i+5 (i.e., start at 5), we won't consider index 3 as start for "one". However, if we had not deleted index 2, there was a "one" at indices 2,3,4. After deletion, that "one" is broken because 'o' is gone. So no need to consider it. But could there be a new pattern that emerges from the concatenation of the last part of the "twone" region and the next characters? For example, consider "twoneone". The string: t w o n e o n e. After we handle "twone" at indices 0-4, we delete index 2 (o). Then the string becomes: t w _ n e o n e (positions 0,1,3,4,5,6,7). Now the characters: indices 3:n,4:e,5:o,6:n,7:e. Could there be a new "one" starting at index 4? That would be e o n? no. Starting at index 5: o n e? That would require index5=o,6=n,7=e. After deletion, index5 is still 'o'? Actually original index5 was 'o' (the start of second "one"?), index6='n', index7='e'. Yes, that "one" is still present if we didn't delete any of its characters. But is it overlapping with the handled "twone"? The handled "twone" covered indices 0-4; indices 5 onward are separate. After deletion, indices shift? But we are not actually modifying the string; we are just selecting indices to remove. The removal indices are absolute positions (original indices). When we delete index 2, the positions 5,6,7 remain unchanged. So the pattern "one" at original indices 5,6,7 might still be present. In our scanning, if we skip i to 5 after handling the "twone", we will then examine from i=5 onward. At i=5, we should check for patterns "twone" or "one"/"two". So it's fine. But we must ensure we do not skip too far to miss patterns that start at index 3 or 4? Those were inside the "twone". Could there be a pattern "one" starting at index 3? That would be n e ? need three letters: 3:n,4:e,5:o -> "neo" not one. "two"? 3:n? no. So no. So it's safe to skip to i+5.

    Alternatively, we could not skip but continue scanning, but we need to avoid double counting the same "one" pattern that is part of "twone". So skipping is simpler.

    After we process "twone", we still need to process "one" and "two" in the rest of the string. But careful: After skipping, we might also encounter "twone" again later.

    Now after scanning for "twone", we need to scan for "one" and "two". But we can combine into a single pass: While scanning i from 0 to n-3, if we see a pattern that is either "one" or "two", we need to decide which index to remove. But we have to treat "twone" specially to avoid removing two separate indices. So we could scan and when we find "twone", we treat it specially. For other "one" and "two" that are not part of a "twone", we can remove the middle character. But how to ensure they are not part of a "twone"? We can just do: if s[i:i+5] == "twone", then handle that and skip ahead; else if s[i:i+3] == "one" or s[i:i+3] == "two", then handle accordingly and maybe skip 3? But careful: If we treat "one" separately, and then skip 3, we might skip over a pattern that starts inside the skipped region but is not overlapping? For a standalone "one", after removing the middle character (say 'n'), the pattern is broken and the next possible pattern could start at the next index. But if we skip 3, we might miss a pattern that starts at i+2? For example, "oneone": indices 0:o,1:n,2:e,3:o,4:n,5:e. If we find "one" at i=0, and we remove index 1 (the 'n'), then after removal, the string becomes o _ e o n e. Could there be a new "one" formed? The remaining characters: indices 0:o,2:e,3:o,4:n,5:e. Could there be a pattern "one" starting at index 3? That would be o,n,e? But the 'n' at index 4 is still there, and 'e' at index5. The substring would be indices 3,4,5: o,n,e -> yes, that's a "one". However, we removed index1, so original index3 is still present, index4 present, index5 present. So the "one" at original indices 3-5 remains. If we skip i to i+3 (i=3) after processing the first "one", we would then examine i=3. But note that i=3 corresponds to original index3, which is the start of the second "one". So that's fine. But what about overlapping? Since "one" doesn't overlap, skipping 3 is okay because the next possible pattern start is at i+3. However, there is a nuance: If we removed the middle character, the pattern is broken, but we still consider the next start at i+3, which is correct. Could there be a pattern that starts at i+1 or i+2? For example, after removing the middle character of "one", the substring at i+1? But i+1 is the 'n' we removed, so no. i+2 is 'e', not start of a pattern likely? But "e" can't start "one" because "one" starts with 'o'. So safe. So we can skip 3 after processing a standalone "one" or "two". But we must be careful if we process "twone" specially, we skip 5.

    But we need to verify if skipping 3 for standalone patterns is always optimal. Consider "one" at indices 0-2. If we delete index 1, we break it. Then we consider i += 3. However, what if there is a pattern "two" that starts at index 1? That would be impossible because index1 is 'n', not 't'. So safe.

    But what about overlapping "one" and "two" only the special case; so after handling "twone", other patterns are separate.

    Thus the greedy approach: scan i from 0 to n-3; if s[i:i+5] == "twone" then add i+2 to removal list, i += 5; else if s[i:i+3] == "one" then add i+1 to removal list, i += 3; else if s[i:i+3] == "two" then add i+1 to removal list, i += 3; else i += 1.

    But is this always minimal? Let's test with examples.

    Example 1: onetwone. Let's apply: s = o n e t w o n e. indices:0:o,1:n,2:e,3:t,4:w,5:o,6:n,7:e. We scan i=0: s[0:3]="one"? yes, so we would add index 0+1=1 (the 'n')? Actually i+1 = index1 (n). Then i +=3 -> i=3. Then i=3: s[3:8]? i=3: check first if i<=n-5? n=8, n-5=3, so i=3 <=3 => check s[3:8] substring length 5: indices 3-7 = "twone"? s[3]=t,4=w,5=o,6=n,7=e => "twone". So we then add i+2=5? Actually i+2 = 5, but we must add index (5+1?) Wait: i is 0-indexed, indices for removal should be 1-indexed. For "twone" handling, we add (i+2) + 1? Let's define: if s[i:i+5] == "twone", we remove the character at original position i+2 (0-indexed) which corresponds to 1-indexed i+3? Actually if i is 0-indexed, the character positions: i (first), i+1 (second), i+2 (third), i+3 (fourth), i+4 (fifth). The middle 'o' is at index i+2. So removal index = i+2+1 = i+3 as 1-indexed. So we need to be careful with off-by-one.

    In our algorithm: we'll store positions as 1-indexed: For "twone", remove i+3 (since i 0-indexed, +3 => 1-indexed). For "one" and "two", remove i+2? Wait: For "one", if we find at i (0-indexed), the characters are i:o, i+1:n, i+2:e. The middle is i+1. So removal index = i+1+1 = i+2? Actually i+1 is 0-indexed, so 1-indexed = i+2. So for "one" and "two", remove i+2. For "two", middle is i+1 as well (t w o: middle w at i+1). So same: i+2.

    Now in the example: first "one" at i=0, we would add index 2 (since i+2=2). That's the position of 'e'? Actually i=0: i+2 =2 => position 2, which is 'e' (since indices: 1:o? Wait indexing: 1-indexed: 1:o, 2:n, 3:e? Let's compute: s="onetwone", 1-indexed: 1:o, 2:n, 3:e, 4:t, 5:w, 6:o, 7:n, 8:e. So position 2 is 'n', not 'e'. I'm confused. Actually i+2 = 2 (0-indexed i=0 => i+2=2) corresponds to position 3? Because 0-indexed index 2 -> 1-indexed 3. We need to add 1: removal index = i+1+1 = i+2? Let's do systematically: For a substring starting at index i (0-indexed), the three characters are at positions i, i+1, i+2 in 0-index. The middle is i+1. So its 1-indexed position is (i+1)+1 = i+2. So removal index = i+2. So for i=0, removal = 2. That corresponds to the second character of string (position 2), which is 'n'. That's correct: we remove 'n' to break "one". So removal index = i+2.

    Now after we remove position 2, we then i += 3 => i=3. At i=3 (0-indexed), we check "twone": s[3:8]? indices 3-7 inclusive? Actually we need to check if i <= n-5, n=8, n-5=3, so i=3 <=3 -> check. s[3]=t,4=w,5=o,6=n,7=e -> yes. Then we remove (i+2) -> i=3, i+2=5 (0-indexed), removal index = i+2+1? Wait, for "twone" we remove i+2 (0-indexed) which is the middle 'o'. So removal index = (i+2)+1 = i+3 = 6. So removal index 6 (1-indexed). That's position 6: original string position 6 is 'o'? Actually position 6 is 'o' (from "twone": positions 4:t,5:w,6:o,7:n,8:e). So we remove position 6. So total removals: 2 and 6. That matches the sample output: 2, positions 6 and 3? Actually sample output says: 2, then 6 3. Wait they gave positions 6 and 3? Let's check sample: Input: onetwone. Output: 2, then 6 3. So they removed positions 3 and 6. Our algorithm gave positions 2 and 6. So we got 2 instead of 3. Is that also minimal? Probably yes. The sample answer uses positions 3 and 6, which are the 'e' of the first "one"? Actually position 3 is 'e' from the first "one"? String: positions: 1:o,2:n,3:e,4:t,5:w,6:o,7:n,8:e. They removed 3 and 6. Removing position 3 (e) breaks the first "one" because without e, "on" is not "one". Removing position 6 (o) breaks both the "two" and the second "one". So both solutions are valid and use 2 removals. So our solution (2,6) is also valid. The problem says any answer is acceptable. So our greedy gives a correct minimal solution, maybe not exactly the sample but okay.

    Now test case "oneoneone": s: positions 1:o,2:n,3:e,4:o,5:n,6:e,7:o,8:n,9:e? Actually "oneoneone" length 9: indices: 1 o,2 n,3 e,4 o,5 n,6 e,7 o,8 n,9 e. Our greedy: scan i=0: s[0:3]="one" -> add removal index i+2=2 (position 2), i+=3 -> i=3. At i=3: check if i<=n-5? n=9, n-5=4, i=3 <=4, so check s[3:8] (indices 3-7): s[3]=o,4=n,5=e,6=o,7=n? That's "oneon"? not "twone". So then check s[3:6]="one"? s[3]=o,4=n,5=e => "one", so add removal i+2=5 (position 5), i+=3 -> i=6. At i=6: i<= n-3? n=9, n-3=6, i=6 <=6: check s[6:9] = indices 6,7,8: o,n,e = "one" -> add removal i+2=8 (position 8), i+=3 -> i=9 done. So removals: 2,5,8 -> positions 2,5,8. That's 3 removals. Sample output for "oneoneone": they gave 3, with positions 4 1 7? Actually sample output: For third test case in first input: "oneoneone" output: 3, then "4 1 7". Wait I need to check the first example output:

    The first input example:

    4 onetwone testme oneoneone twotwo

    Output: 2 6 3 0

    3 4 1 7 2 1 4

    So for "oneoneone", they output 3 and positions 4 1 7. That's also 3 removals but different positions. Our removals 2,5,8 are also valid. So it's fine.

    Now "twotwo": s: t w o t w o. Our greedy: i=0: s[0:3]="two"? yes, add removal i+2=2 (position 2? Actually 0+2=2 position 2 is w), i+=3->i=3. i=3: n=6, n-3=3, i=3 <=3: check s[3:6]="two"? s[3]=t,4=w,5=o => yes, add removal i+2=5 (position 5? i=3 -> i+2=5, position 5 is w? Actually positions: 1 t,2 w,3 o,4 t,5 w,6 o. So position 5 is w). So removals: 2 and 5. Sample output for twotwo: 2, positions 1 4. That's also 2 removals. So either is fine.

    Thus the greedy works.

    But is it always minimal? Let's analyze: The problem is essentially a hitting set for intervals of length 3 representing forbidden substrings, with the special property that intervals can overlap only in the specific pattern where a "two" interval ends at index i and a "one" interval starts at i, overlapping at i. In other words, intervals [i, i+2] for "two" and [j, j+2] for "one". Overlap occurs if i+2 = j. This is a chain of two intervals overlapping at a single point. There are no other overlaps because self-intervals don't overlap. So the set of intervals is like a collection of disjoint intervals or pairs that overlap exactly one point. Also there could be overlapping chains longer? Could there be "twoneone"? Actually "twoneone": after "twone", we have "one" starting at index 5? But careful: "twoneone": indices: 0:t,1:w,2:o,3:n,4:e,5:o,6:n,7:e. The "twone" at 0-4, and "one" at 4-6? Actually "one" starting at index 4 would be e,o,n? no. Starting at index 5: o,n,e? that's a valid "one". So there is a "one" starting at index 5, which does not overlap with "twone" (since "twone" occupies indices 0-4, and the "one" occupies 5-7, no overlap). So chain of overlapping intervals limited to two. Could we have "twotwo"? Two "two" intervals cannot overlap because they would need to share two characters? Actually "two" and "two" could overlap if they are consecutive? For "twotwo": first "two" at indices 0-2, second at 3-5. They do not overlap. So no.

    Thus the interval graph is quite simple. The minimal vertex deletion (deleting characters) to hit all intervals can be solved greedily: For any pair of overlapping intervals (the twone case), we can hit both by deleting the common vertex. For isolated intervals, deleting the middle vertex is optimal because it doesn't belong to any other interval (since no overlap except possibly the overlapping case, but we already handled those). However, could there be a scenario where deleting the middle vertex of a "one" might conflict with later "one" intervals? No, because they are disjoint. So the greedy is optimal.

    To formalize: The set of intervals (each of length 3) corresponds to the forbidden substrings. The objective is to delete minimum number of points such that each interval contains at least one deleted point. This is a classic hitting set for intervals, which can be solved by greedy: sort intervals by right endpoint, then always delete the rightmost point? But that's for intervals on a line to minimize number of points? Actually the classic problem: given intervals, find the minimum number of points such that each interval contains at least one point. That can be solved by sorting intervals by right endpoint and placing a point at the rightmost possible? That gives the minimum number of points needed. But here intervals are all of same length, and we have to delete characters (points) that are integers positions. The classic result: the minimum number of points needed to hit all intervals equals the size of a maximum set of pairwise non-overlapping intervals? Actually it's the same as interval stabbing: the minimum number of points needed to intersect all intervals is equal to the maximum number of pairwise disjoint intervals. That's the "interval covering" or "minimum piercing set" for intervals on a line, which is indeed solved by greedy: sort by right endpoint, pick the right endpoint of the earliest finishing interval, remove intervals covered, repeat. For intervals of equal length but not necessarily sorted? But note: Here intervals are only of length 3, and the hitting set must be a subset of the integer positions. The classic result: The minimum number of points to hit all intervals is the size of a maximum set of intervals that are pairwise non-overlapping. That's true for intervals on a line (a consequence of Dilworth or Kőnig's theorem for interval graphs). But is that true for intervals of length exactly 3? Yes, it holds for any intervals. So the minimum number of deletions r is equal to the maximum number of intervals that are pairwise non-overlapping (i.e., no two share a character). But we need to produce actual positions. The greedy described earlier essentially picks the point at the middle for isolated intervals, and for overlapping pair picks the common point, which yields a hitting set of size equal to the number of non-overlapping intervals (since overlapping pairs count as one? Let's check: For a pair of overlapping intervals (two intervals share one point), the maximum set of disjoint intervals would be? They share a point, so they are not disjoint? Actually disjoint means they do not intersect. Since they share a point, they are not disjoint. So the maximum set of pairwise disjoint intervals could be 1 (if you cannot pick both). But if they only share a point, you could pick either one but not both because they intersect at that point. So the maximum disjoint set size is 1 for that overlapping pair. However, the hitting set minimum might be 1 because one point can hit both intervals. Indeed the minimum number of points needed is 1, which equals the size of a maximum set of pairwise disjoint intervals? Wait, if there is a pair overlapping, the maximum set of disjoint intervals could be 1, and minimum hitting set is also 1. For isolated intervals that are disjoint, the maximum disjoint set size equals the number of intervals, and minimum hitting set also equals that number (since you need at least one point per disjoint interval, and you can take one point per interval). So indeed r = size of maximum set of pairwise disjoint intervals.

    Our greedy algorithm: for overlapping pair (twone), we use one deletion covering both intervals; for each isolated interval (one or two), we use one deletion. So the number of deletions equals the number of "clusters" of intervals that are connected via overlap. Since intervals only overlap pairwise at a single point, clusters are either single intervals or a pair (two intervals overlapping). Could there be a cluster of more than two intervals? Consider "twoneone"? Could there be three intervals that all intersect? "twone" gives two intervals overlapping. Could a third interval overlap with the pair? Suppose we have "twone" at positions i..i+4, and another "two" that ends at i? That would be a "two" at i-2,i-1,i? For overlapping with the "two" part of the pair, it would need to share characters: the "two" interval is [i, i+2]. Another "two" interval could be [i, i+2]? same. Or a "two" interval ending at i would be [i-2,i]? That would overlap with the "two" interval at i? But that would require s[i-2]='t', s[i-1]='w', s[i]='o'. For it to be a valid "two", s[i] must be 'o' (true if it's part of "twone"? Actually in "twone", s[i]='t', s[i+1]='w', s[i+2]='o'. So the "two" interval is [i,i+2]. Another "two" interval could be [i+2,i+4]? That would require s[i+2]='t'? but s[i+2]='o', so not. Another "one" interval could be [i+2,i+4] which is the overlapping one we already have. Could there be an "one" interval that starts at i? That would require s[i]='o', but s[i]='t' in "twone", so no. So only two intervals in a cluster.

    Thus the greedy algorithm yields minimal number of deletions.

    Now we need to implement efficiently with total length up to 1.5e6.

    Implementation plan:

    For each test case:

    • Read string s.
    • n = len(s)
    • Create empty list removals.
    • i = 0
    • while i < n:
      • Check for "twone": if i <= n-5 and s[i] == 't' and s[i+1] == 'w' and s[i+2] == 'o' and s[i+3] == 'n' and s[i+4] == 'e': removals.append(i+3) # 1-indexed: i (0-index) + 3 = position of 'o' (since index i+2, +1 => i+3) i += 5
      • else if i <= n-3 and (s[i] == 'o' and s[i+1] == 'n' and s[i+2] == 'e'): removals.append(i+2) # i+2 is 1-indexed? i (0-index) +2 = position of middle 'n' i += 3
      • else if i <= n-3 and (s[i] == 't' and s[i+1] == 'w' and s[i+2] == 'o'): removals.append(i+2) i += 3
      • else: i += 1

    Note: For "one" and "two", the removed position is i+2 (1-indexed) because i+1 is middle in 0-index. For "twone", removed i+3 (1-indexed) because i+2 is middle in 0-index.

    Check: In the code, we can compute pos = i+2+1? Let's be clear: For pattern starting at i (0-index), the middle index 0-index is i+1, so 1-index = i+2. For "twone", pattern starting at i (0-index), the index to remove is the third character (the 'o') at 0-index i+2, so 1-index = i+3. So yes.

    Edge cases: Need to ensure that we don't go out of bounds when checking conditions. Use if i+4 < n etc.

    Now test with sample inputs.

    Test sample 2 input? Let's manually test a few to ensure correctness.

    Second sample input: 10 onetwonetwooneooonetwooo two one twooooo ttttwo ttwwoo ooone onnne oneeeee oneeeeeeetwooooo

    We need to verify our algorithm matches expected output patterns.

    We'll simulate quickly for a few.

    But before coding, consider potential pitfalls:

    • Overlapping handling: Could there be a situation where "twone" is detected but we might also detect "one" or "two" inside it if we skip incorrectly? But we skip 5 after detection, so we don't double count.

    • However, consider string "twoneone". We detect "twone" at i=0, add removal at pos 3 (0-indexed i+2) => removal index 3? Actually 1-indexed: i=0 -> pos 3? Wait 0+3=3. So removal of position 3 (the 'o'). Then skip to i=5. Then at i=5, we see "one" from positions 5-7? Actually s indices: 0:t,1:w,2:o,3:n,4:e,5:o,6:n,7:e. After removal of position 2 (0-index), the "one" at 5-7 is still present. At i=5, we check "twone"? i=5, n=8, n-5=3, i=5>3? Actually n=8, n-5=3, i=5>3 so skip. Then check "one": s[5]='o',6='n',7='e' -> yes, add removal i+2=7 (position 7? i=5 => i+2=7). So removal positions: 3 and 7. That's 2 deletions. Is that minimal? Possibly yes, because we need to break "twone" and the separate "one". Minimum deletions is 2. So okay.

    But could there be a scenario where it's better to delete a different character in "twone" to also break a later pattern? For example, suppose we have "twoneone". If we delete the 'o' from "twone", we break both patterns in that cluster, but still need to handle the separate "one". Could we instead delete the 'n' of the "twone" (the fourth character) to also break the subsequent "one"? Let's check: "twoneone": delete position 4 (the 'n' of the "twone"? Actually positions: 1:t,2:w,3:o,4:n,5:e,6:o,7:n,8:e. If we delete position 4 ('n'), then what happens? The "twone" pattern: "two" at 1-3: t,w,o -> still exists? Actually "two" is at positions 1,2,3, which is t,w,o -> still "two", so that's still a problem. The "one" at 3-5: positions 3:o,4:(deleted),5:e -> not "one". But the "two" remains, so we would need to delete something else to break "two". So that's not better. What if we delete position 5 ('e')? Then "twone" is broken because "one" missing e, but "two" remains. So still need another deletion. What if we delete position 3 ('o')? That breaks both "two" and the overlapping "one". But it does not affect the later "one" at 6-8 (positions 6:o,7:n,8:e). So still need second deletion. So 2 is minimal.

    What about scenario where there is "twotwone"? That is "two" and then "twone"? Overlap? Let's see: string: t w o t w o n e. Positions: 1:t,2:w,3:o,4:t,5:w,6:o,7:n,8:e. Here we have "two" at 1-3, and "twone" at 4-8? Actually "twone" would be at indices 4-8? Check: 4:t,5:w,6:o,7:n,8:e => yes "twone". Also "two" at 4-6? Actually "two" at 4-6 is also "two" because t,w,o. So there is overlapping? The "two" at 1-3 is separate from the "twone" because they don't overlap (3 is o, 4 is t). So we have a standalone "two" and a "twone" cluster. Our algorithm: scan i=0: check s[0:5]? i=0, s[0]='t',1='w',2='o',3='t',4='w'? Not "twone" because need 'n' at i+3? Actually s[3]='t', not 'n'. So not "twone". Then check s[0:3]="two"? yes, add removal at i+2=2 (position 2? Actually i=0 => removal pos=2). i+=3 -> i=3. Now i=3: check i <= n-5? n=8, n-5=3, i=3 <=3, check s[3:8]? indices 3:t,4:w,5:o,6:n? Wait s[3]=t,4=w,5=o,6=n? Actually we have to be careful: after deletion we haven't changed the string, but scanning continues. s = "twotwone". Index 0:t,1:w,2:o,3:t,4:w,5:o,6:n,7:e. So at i=3, s[3]=t,4=w,5=o,6=n,7=e => that's "twone"? t w o n e? yes, because s[3]=t,4=w,5=o,6=n,7=e => "twone". So we detect "twone" at i=3, add removal at i+3 = 6 (position 6). i+=5 -> i=8, done. So removals: positions 2 and 6. That's 2 deletions. Is that minimal? Possibly yes. Could we do with 1? Suppose we delete position 3 (the first 'o' of first "two")? That breaks first "two", but still have "twone" at 4-8. For "twone", need at least one deletion, so total at least 2. What if we delete position 5 (the 'o' in "twone")? That breaks both patterns within "twone" (two and one) but leaves first "two" intact. So still need another deletion. So 2 is minimal.

    Now, what about scenario with "oneone" and "twone" overlapping? But that's separate.

    Thus the greedy seems correct.

    But is there any case where deleting the middle character of "one" or "two" is suboptimal because it might create a new forbidden substring? For example, if we delete a character, the resulting string after deletion could have new substrings that weren't there before? But the problem requires that after simultaneous deletions, the remaining string (with those indices removed) is liked. Since we are deleting characters, it's possible that new substrings appear due to concatenation of characters that were previously separated? For example, original string "on e"? Actually consider: s = "otwoe"? Not sure. Deletions remove characters, bringing together characters that were not adjacent before. This could potentially create new "one" or "two" substrings that didn't exist originally. For instance, suppose we have s = "onxey"? Not exactly. Let's construct: s = "on e"? Actually after deletion, characters become adjacent. It's possible to create a forbidden substring that wasn't present originally. For example, s = "twone". If we delete the 'n' (position 4?), would that create something? Let's test: s = "twone". If we delete 'w' (position 2), the remaining string would be "tone". "tone" contains "one"? Actually "tone": t o n e -> contains "one" at positions 2-4? In the new string: characters: t, o, n, e. The substring "one" is "o n e"? That's present, so new forbidden substring appears. But our algorithm would not delete 'w' in "twone"; it deletes the 'o' (position 3). But consider a different scenario: For a standalone "one", if we delete the middle 'n', the remaining string becomes "oe", which is fine. Deleting 'o' yields "ne", fine. Deleting 'e' yields "on". That might combine with adjacent characters? Suppose we have "one" followed by something: e.g., "oneabc". If we delete the 'e', the remaining string becomes "onabc". The characters "on" plus 'a'? "ona"? Not "one". But could "on" combine with the next two characters to form "one"? For that we need "n" followed by "e", but 'e' was deleted, so no. However, if we delete the 'o' in "one", we get "neabc". The substring "nea"? Not "one". So it's safe. But consider overlapping patterns: "twone" we delete the 'o' and get "twne". That's fine. However, what about a scenario where deleting a character from a pattern might cause two parts from previously separate patterns to combine into a new pattern? For example, s = "t w o o n e"? Actually "two" and "one" are separated by a gap. If we delete characters in between, they could merge to form "twone"? Example: s = "twoxne". Original: positions: 1:t,2:w,3:o,4:x,5:n,6:e. There is "two" at 1-3, and "one"? No because 4:x,5:n,6:e not "one". If we delete the 'x' (position 4), the string becomes "twone", which now contains "two" and "one". So by deleting a character that is not part of any forbidden substring, we could create new ones. Our goal is to produce a set of deletions that results in a liked string. So we must ensure that after deleting the chosen indices, no forbidden substrings exist. The greedy algorithm as described only cares about breaking existing patterns; it does not consider the potential creation of new patterns due to deletions. So we need to check whether such creation can happen with our selected deletions, and whether the greedy still yields a valid solution. Since we are removing characters, the final string is a subsequence of the original. The question: Is it possible that by deleting some characters to break existing "one" and "two", we inadvertently create new ones? The answer is yes, as the above example shows. But does our greedy algorithm, which chooses deletions as described, avoid such creation? Possibly not automatically; we must analyze if the specific deletions chosen (middle of isolated patterns and overlapping 'o') guarantee that no new forbidden substrings appear.

    We need to examine this carefully because it's a known Codeforces problem (I think it's CF 1366A? Actually I recall a problem "B. Trouble Sort"? No. There is a known problem: "1367C Social Distance"? Not. I think it's Codeforces Round #... Let me recall: There is a problem "Polycarp and String" maybe "1368A"? Hmm.

    But I'm aware of a problem: "Remove the Substring (hard version)"? Not.

    Actually, I recall a problem: "D. Remove One Element"? No.

    Maybe it's "C. Bad String"? Not.

    Wait, this problem is from Codeforces Round #1360? Let me search memory: There is a problem "B. Honest Coach"? No.

    Better to search memory: The statement says "Polycarp does not like a string if it contains at least one string 'one' or at least one string 'two'." That's from Codeforces problem 1366A? No.

    I recall a problem: "A. Remove a Progression"? Not.

    Actually I recall a problem "B. Remove Prefix"? Not.

    I think it's Codeforces Round #1462 problem "C. Unique Number"? Not.

    Let's search online memory: I think it's Codeforces problem "1367B" (even array) but no.

    Alternatively, maybe it's from Codeforces Round #1560? No.

    Given that this problem appears in many editorial lists about greedy and removing characters to avoid "one" and "two". I remember a solution: find "twone" and delete 'o', then delete middle of "one" and "two". That is exactly the solution, and it's known to be correct. So probably the creation of new substrings does not happen with those deletions, or if it does, it can be handled within the same greedy because those new substrings would have been considered earlier? Let's test a potential counterexample.

    Consider string: "twoone". Actually "twoone" is "t w o o n e". This is not "twone" because the 'o' is repeated? Wait "twoone": positions: 1:t,2:w,3:o,4:o,5:n,6:e. There is "two" at 1-3, and "one" at 4-6? For "one", we need o,n,e. At 4:o,5:n,6:e -> yes, "one" at 4-6. So we have "two" and "one" but they are not overlapping (there's a gap: position 3 is 'o' and position 4 is 'o'). Actually they are adjacent? They share no characters because "two" ends at 3, "one" starts at 4. So they are separate. Our greedy: scan i=0: check s[0:5]? i=0, n=6, i<=1? Actually n-5=1, i=0<=1, check "twone"? s[0]=t,1=w,2=o,3=o,4=n? That gives t,w,o,o,n? Not "twone" because need 'n' at i+3? i+3=3, s[3]=o not n. So not "twone". Then check s[0:3]="two"? yes, add removal at i+2=2 (position 2? Actually i=0 -> pos 2, which is 'w'? Wait positions: 1:t,2:w,3:o,4:o,5:n,6:e. So removal pos 2 (w). Then i+=3 => i=3. At i=3: check i <= n-5? n=6, n-5=1, i=3>1 so skip "twone" check. Check i <= n-3? n-3=3, i=3<=3, check s[3:6]="one"? s[3]=o,4=n? Wait s[4]=o? Actually careful: indices: 0:t,1:w,2:o,3:o,4:n,5:e. So s[3]=o, s[4]=n, s[5]=e -> that's "one"? o,n,e => yes. So we detect "one" at i=3, add removal at i+2=5 (position 5? i=3 => i+2=5, position 5 is n? Actually position 5 (1-indexed) is n? Wait 1-indexed: pos1:t,2:w,3:o,4:o,5:n,6:e. So removal pos5 (n). So removals: positions 2 and 5. After deletions, we remove w and n. The remaining string: t, o, o, e? Actually positions left: 1:t,3:o,4:o,6:e => "tooe". No "one" or "two". That's fine.

    But consider an alternative: Could there be a string where after removing the middle of "one" or "two", the remaining characters form a new "one" or "two"? For example, s = "oneone". If we remove the middle of first "one" (position 2, 'n'), we get "o e o n e"? Actually original: o n e o n e. Removing pos2 (n) yields: o, e, o, n, e -> string "oeone". Let's check: positions: 1:o, 3:e, 4:o,5:n,6:e. Does it contain "one"? Substring starting at index? 4:o,5:n,6:e => "one"! Indeed, after deleting the 'n' of the first "one", we get "oeone", which contains "one" at positions 4-6 (original indices 4,5,6). But wait, original indices: 1:o,2:n,3:e,4:o,5:n,6:e. Removing index2 yields characters at indices 1,3,4,5,6: 1:o,3:e,4:o,5:n,6:e. The new string: "o e o n e". Let's write as "oeone". The substring from indices 2-4? In the new string, positions: 1:o, 2:e, 3:o, 4:n, 5:e. Check for "one": starting at index 3: o,n,e? Actually at index 3: o, index 4: n, index 5: e => that's "one". So indeed a new "one" appears after deletion! But is this a problem? Because we are deleting indices simultaneously. In our algorithm, for "oneone", we would delete positions 2,5,8? Wait for "oneone" length 6, we earlier computed removals: positions 2 and 5? Actually "oneone" length 6: indices 1:o,2:n,3:e,4:o,5:n,6:e. Our greedy for "oneone": i=0 detect "one", add removal pos 2 (n). Then i+=3 -> i=3. At i=3, detect "one", add removal pos 5 (n). So removals: pos2 and pos5. That's two deletions. After removing positions 2 and 5, the remaining characters: positions 1:o,3:e,4:o,6:e => "oeoe". Does this contain "one"? Check: "oeoe": o e o e. Substrings: "oeo", "eoe", none are "one" or "two". So it's safe. But wait, earlier I considered removing only the first n (pos2) and not the second, which gave "oeone" with "one". However, in our algorithm we also remove the second n (pos5). So we remove both middle characters, resulting in no "one". So it's fine.

    But the issue: Could our greedy removal for a standalone "one" cause creation of a new "one" that we have not accounted for because we might skip it due to our skipping? For instance, suppose we have "oneone", and we process first "one" at i=0, add removal pos2, skip to i=3, then process second "one", add removal pos5. That's exactly what we did, so we removed both middles. The new "one" that appears after first deletion only if we don't delete the second middle. Since we do delete it, it's safe.

    But consider a scenario where there is a pattern "one" followed by something that after deleting the middle of the first "one", a new "one" forms that uses characters from the second part but is not originally a "one". Could that new "one" be missed because we already skipped ahead and don't check again? For example, s = "onen". Actually let's try to construct: We want that after deleting the middle of a "one", the remaining characters from that "one" plus the next characters form a new "one". The only way to form "one" is o, n, e. The deletion of the middle n leaves "oe". That's o and e. To get "one", we need an 'n' after the 'e' maybe? For instance, if the string is "onen", i.e., o n e n. Remove the n at position 2 (the middle of the first "one"). The remaining: o e n. That's "oen". Does it contain "one"? Substring: positions: o e n -> not "one" because need o n e. So no. If we delete the 'o' of "one", we get "ne...". Could that form "one"? Only if there was an 'o' before? Not.

    If we delete the 'e' of "one", we get "on...". That could combine with next characters to form "one"? For "on" to become "one", we need an 'e' after it. So if after the "one" we have an 'e', originally the substring might be "one e"? Actually s = "onee". Original: o n e e. If we delete the 'e' at position 3 (the ending e of "one"), we get "o n e" (positions 1:o,2:n,4:e) -> that's "one"! So deleting the 'e' of a "one" could create a new "one" if the next character is 'e'? Let's examine: s = "onee". Positions: 1:o,2:n,3:e,4:e. Original has "one" at 1-3. If we delete position 3 (the first 'e'), the remaining string is "o n e" (positions 1,2,4): o, n, e -> that's "one". So we have created a new "one". Our greedy algorithm for "one" deletes the middle character (n) by default, not the 'e' or 'o'. So we avoid this problem. In our earlier choice, we always delete the middle character for "one" and "two". Is that always safe? Possibly yes because deleting the middle character breaks the pattern without leaving a prefix and suffix that could combine with adjacent characters to form the pattern again. Let's analyze: For "one", if we delete the 'n', we get "o e". The remaining two characters are 'o' and 'e'. To form "one", we would need an 'n' between them or after them. If there is an 'n' later, could they form "one"? The sequence would be o (from original), then some characters, then e? Actually after deletion, the 'o' and 'e' are adjacent? When we delete the middle, the characters before and after become adjacent. In "one", positions: i:o, i+1:n, i+2:e. After deleting i+1, the new string has ... o, e ... adjacent. So the substring "oe" is formed. To get "one", we would need an 'n' between them, but they are adjacent, so no. Could they combine with a later 'n' to form "one"? For example, if we have "one" and later an 'n', the characters would be o e ... n; but "one" requires o n e, not o e n. So no. If we have o e and then later an 'n' and then 'e', could there be "one"? The pattern "one" is contiguous, so it must be three consecutive characters. After deletion, the characters become reordered: originally o, n, e; after deleting n, o and e become consecutive. So no chance to have o, n, e in order without an n between them. So deleting the middle is safe.

    For "two", deleting 'w' yields "t o". Similarly safe.

    For "twone", deleting the shared 'o' yields "twne". That's t w n e. Could that contain "one" or "two"? "twne": check "two"? need t w o -> no o after w; "one"? need o n e -> no o at appropriate place? Actually there is 'o'? The string is t,w,n,e: there is no 'o'. So safe.

    Thus, the specific deletions we choose (middle for isolated patterns, shared 'o' for overlapping) seem to ensure that no new forbidden substrings are created by the deletions. But is it always true? Let's try to think of a scenario where after deleting the middle of a "one", the characters from before and after combine with other characters to form a new "one". Suppose we have string: "o n e x n e". Actually s = "one x ne"? Let's design: We have a "one" at positions i,i+1,i+2. After deleting i+1, we have o and e adjacent. Then after e, there is some characters. Could the o and e and some later n form "one"? That would require a substring like o, n, e. But after deletion, o and e are adjacent, so we get "oe". To have "one", we need an 'n' between them, which is impossible because they are adjacent. Could we have "one" starting at some position that includes the o from the original but not the e? For instance, maybe the o joins with a later n and e that were originally separate but become adjacent after deletions of other characters? That could happen if we delete some characters between them. Our algorithm only deletes characters that are part of patterns. Could those deletions cause other characters to become adjacent in such a way that a new "one" forms that spans across multiple original patterns? For example, consider s = "t w o n e". That's "twone" we already handled. If we delete the 'o', we get "t w n e". No new.

    Consider s = "one two". Actually "onetwo": o n e t w o. Here we have "one" at 1-3 and "two" at 4-6? Actually positions: 1:o,2:n,3:e,4:t,5:w,6:o. There is "one" and "two" but not overlapping. Our algorithm: detect "one" at i=0, delete position 2 (n). Then i=3, detect "two" at i=3? Check: i=3 (index3), s[3]=t,4=w,5=o -> "two", delete position 5? Actually i=3 => removal i+2=5 (position 5 which is w? Wait 1-indexed: position 1:o,2:n,3:e,4:t,5:w,6:o. So removal at i+2 = 3+2=5 -> position 5 (w). After deletions, remaining characters: positions 1:o,3:e,4:t,6:o -> "oeto". No "one" or "two". Good.

    Now consider s = "onennne"? Not.

    What about scenario where we delete middle of "two" and that creates "one"? For "two", deleting 'w' yields "to". That's t and o. Could that combine with later characters to form "one"? We would need o n e after the t? But the sequence is t o ... To have "one", we need o n e. The t is before the o, so possible substring could start at the o: o ... but after deletion, the characters after o become adjacent to t? Actually after deleting 'w', t and o become adjacent. So the string has "to". If after o there is n and e, we could have "one" starting at o: o, n, e. That would be originally present if there was "one" after the "two"? For example, s = "twone" is overlapping case, but we handle that specially. In "twone", we delete the 'o', not the 'w'. But suppose we have a string "twoxone"? That is "t w o x o n e". Original: "two" at 1-3, "one" at 5-7 (since positions: 1:t,2:w,3:o,4:x,5:o,6:n,7:e). They are separate. Our algorithm: first detect "two" at i=0, delete position 2 (w)?? Actually removal for "two" is i+2 (i=0 -> pos 2? Wait i+2=2? That's position 2 which is w? Actually 1-index: i=0 => removal at pos 2, which is w. Then i+=3 -> i=3. At i=3, check for patterns: i=3, n=7, n-5=2, i>2 so skip "twone". Check i <= n-3? n-3=4, i=3<=4. s[3]=o? Actually index 3 is o (since 0:t,1:w,2:o,3:x? Wait careful: indices 0-based: 0:t,1:w,2:o,3:x,4:o,5:n,6:e. So at i=3 (0-indexed) s[3]=x. Not "one" or "two". So we would then i++ eventually. So removals: pos2 (w). But we still have "one" at positions 5-7? That remains! Actually we missed the "one" because we didn't detect it? Wait our scanning: after i=3, we will increment i to 4. i=4: check i<= n-3? n-3=4, i=4<=4, s[4]=o, s[5]=n, s[6]=e => "one". So we would detect "one" at i=4 and add removal pos i+2=6 (position 6? i=4 => i+2=6, 1-indexed pos 6 is n? Actually position 6 is n? Let's map: 1-index: 1:t,2:w,3:o,4:x,5:o,6:n,7:e. So removal pos 6 (n). So removals: pos2 and pos6. After deletions: remove positions 2 (w) and 6 (n). Remaining: t, o, x, o, e -> "toxoe". Check for "one": substring? "tox": no; "oxo": no; "xoe": no; "toxo": etc. No "two"? "to"? no. So safe. However, note that after deleting w, the string becomes "to x one"? Actually original: t w o x o n e. Remove w => t o x o n e => "toxone". That string now has "one" at positions? "toxone": characters: t, o, x, o, n, e. The substring at indices 4-6 (0-index after removal? but we haven't removed n yet). Before we remove n, we have "toxone". There is "one" at indices 4,5,6? Actually after removing w, the characters are at original indices 1,3,4,5,6,7: 1:t,3:o,4:x,5:o,6:n,7:e => that's "t o x o n e". The substring starting at index 5? Let's check: positions: after removal, the string is: 1:t, then 3:o, then 4:x, then 5:o, then 6:n, then 7:e. So consider three consecutive characters: (3,4,5): o,x,o -> not; (4,5,6): x,o,n -> not; (5,6,7): o,n,e -> that's "one"! So after only deleting w, we still have "one" present. But our algorithm also deletes n (position 6) in the later step. So final string after both deletions is safe. So indeed, if we only deleted the middle of "two", we might not break the later "one", but we handle it separately. The creation of "one" after deleting w did not create a new "one" beyond the existing one; it was originally present as a separate "one"? Actually originally, there was a separate "one" at positions 5-7? But originally, before deletions, "one" existed? Let's see original: s="twoxone". Substrings: "two" at 1-3, and "one" at 5-7? Check positions: 5:o,6:n,7:e -> yes "one" exists. So it's not newly created; it was already there. So our algorithm handles it.

    Now, consider a scenario where there is no "one" originally, but after deleting some characters, a new "one" appears. For that to happen, the deletions must cause an 'o', an 'n', and an 'e' to become consecutive in that order. Our deletions are only of characters that are part of patterns we identified. Could this create a new "one" that was not originally there? Possibly if there were scattered o, n, e that become adjacent after deletions. For instance, s = "o n e"? That's already "one". So consider s = "o x n e". Original: o, x, n, e. There is no "one" because the substring "oxn" not, "xne" not. If we delete the 'x', we get "o n e" which is "one". So if we happen to delete a character that is between an 'o' and 'n' and 'e', we could create "one". Is it possible that our algorithm would delete such an 'x'? Our algorithm only deletes characters that are part of "one", "two", or "twone". Those characters are only 'o','n','e','t','w' specifically. It never deletes arbitrary letters like 'x'. So it wouldn't delete 'x'. However, could it delete a character that is part of a pattern but also serves as a separator between an 'o' and 'n' and 'e' from other parts? For example, suppose we have s = "o n e o n e"? Already patterns. But after deleting the middle 'n' of the first "one", we get o e o n e. As we saw, that did not create new "one" if we also delete the second 'n'? Actually it created "one" when only the first 'n' is deleted, but we also delete the second 'n' because it's part of a separate "one". But if there was no second "one", would it create a new one? Consider s = "oneo"? Actually s = "oneo": o n e o. There is "one" at positions 1-3. Our algorithm would detect "one" at i=0, delete position 2 (n), i+=3 -> i=3. i=3 is beyond n-3 (n=4, n-3=1), so done. So removals: pos2 (n). Remaining characters: positions 1:o,3:e,4:o -> "oeo". Check for "one": substrings: "oeo": o e o not; "eo": no. So safe. No new "one". So that's fine.

    What about s = "onen"? We already considered: delete n gives o e n -> "oen" not "one". So safe.

    What about s = "onet"? delete n gives o e t -> no.

    What about s = "two...": similar.

    Thus, the chosen deletions seem to avoid creating new patterns.

    However, there is a known tricky case: "twone" if we delete the wrong character, we might create something. But we delete the 'o' which is safe.

    Therefore the greedy algorithm should be correct.

    Now, need to confirm that the algorithm yields the minimum number of deletions. Since each deletion we perform corresponds to covering a maximal set of intervals (cluster). For each cluster (either a single "one"/"two" or a "twone" pair), we delete exactly one character. Since clusters are independent (non-overlapping after handling the pair), the total deletions equal the number of clusters. This is optimal because at least one deletion is needed per cluster, as intervals in a cluster intersect (share at least one point) but clusters are disjoint. More formally, consider the set of intervals for "one" and "two". They form a graph where intervals are vertices and edges represent overlap (share at least one character). The graph is a collection of connected components. Each component requires at least one deletion because all intervals in the component are mutually intersecting? Not necessarily all intervals in a component are pairwise intersecting, but in this specific graph, components are either a single interval or two intervals overlapping at a point (so they intersect). In a component of intervals that all intersect at a common point? Actually in "twone", the two intervals intersect at the middle 'o'. So there is a common point. So one deletion can cover the whole component. For a single interval, obviously one deletion needed. Could there be a component with more than two intervals that all share a common point? For that, we would need three intervals all covering the same position. Could that happen? For three intervals to all cover a position x, each interval must be of length 3 covering x. So x could be the first, second, or third character of each interval. For "one" intervals, they have fixed pattern: they contain 'o','n','e'. For an interval covering x, the pattern must have the appropriate letter at that position. For example, if x is the 'o' of a "one", then the interval would be positions x, x+1, x+2? Actually if x is the 'o', then the interval is [x, x+2] with s[x]='o', s[x+1]='n', s[x+2]='e'. If x is the 'n', then interval is [x-1, x+1] with s[x-1]='o', s[x]='n', s[x+1]='e'. If x is the 'e', then interval is [x-2, x] with s[x-2]='o', s[x-1]='n', s[x]='e'. So multiple intervals could cover the same x if they are of different shifts. For example, could we have a position that is the 'o' of one "one" and the 'n' of another "one"? That would require overlapping intervals but with different patterns? But "one" pattern is fixed; could there be a position that is the 'o' of one "one" and also the 'n' of another "one"? For that to happen, we would need two intervals: one starting at x (so characters at x, x+1, x+2: o, n, e). Another interval where x is the 'n' would start at x-1 (so characters x-1, x, x+1: o, n, e). So the two intervals are [x, x+2] and [x-1, x+1]. These overlap heavily: they share positions x and x+1. They both would require s[x]='o' for the first? Wait for the first interval starting at x: s[x] must be 'o'. For the second interval starting at x-1: s[x] must be 'n' (since it's the second character). So s[x] cannot be both 'o' and 'n'. Therefore two different "one" intervals cannot both be valid covering the same position with different roles because the letter at that position would need to satisfy conflicting requirements. The only way two intervals can overlap is if they share the pattern alignment? Actually the only possible overlapping of two "one" intervals would be if they are offset by 3 (no overlap) or maybe offset by 1 or 2 would cause letter conflicts. Let's test offset by 1: first interval at i: positions i,i+1,i+2: o,n,e. Second at i+1: positions i+1,i+2,i+3: need o,n,e. At i+1, first has n, second requires o -> conflict unless n=o, impossible. Offset by 2: first at i, second at i+2: at i+2 first has e, second requires o -> conflict. So two "one" intervals cannot overlap at all. Similarly, two "two" intervals cannot overlap. So the only overlaps are between a "two" and a "one" as described. So components are either isolated intervals or overlapping pairs. Thus the greedy is optimal.

    Hence we can implement.

    Now implement for many test cases with total length up to 1.5e6. The algorithm is O(n) per test case, which is fine.

    Now about output: For each test case, print r on first line, and if r>0, print the r indices separated by spaces on the second line. The order of indices can be any. We'll collect them in a list and then output. Note that in sample output, they have a space after the last number sometimes (like "4 1 7 "). That's fine.

    Edge cases: When r=0, we just print 0 and possibly an empty line or skip second line. Usually printing just "0" and then move to next test case is okay. But be consistent with formatting: after printing 0, we can print a newline and then next test case. No need to print an extra blank line. In examples, they have a blank line after 0? In first sample output, after test case 2 (testme) they printed "0" and then an empty line? Let's check:

    First sample output as given:

    2 6 3 0

    3 4 1 7 2 1 4

    It appears as: after "0", there is a blank line (maybe just newline). Actually reading:

    Output:

    2 6 3 0

    3 4 1 7 2 1 4

    Interpretation: first test case: lines: "2", "6 3". second test case: "0", then blank line? Actually likely they printed "0" and then an empty line (or just a newline) but the next line is "3" for third test case. So it's:

    2 6 3 0

    3 4 1 7 2 1 4

    So there is a line with just "0", then a line with "3". So that means after printing "0", they printed a newline, and then for next test case they printed "3". So no extra blank line; it's just that the line after "0" is the next test case's first line. So we can simply print "0\n" and then continue. But careful: If we print an extra newline after "0" and then print next test case's first line, that's fine.

    But some solutions print a second line with nothing, but that might cause presentation issues. Safer: print r, and if r>0, print second line with indices; else just print r and then move to next test case (print newline for next). So each test case occupies 1 or 2 lines accordingly.

    Now implement.

    Pseudo-code:

    def solve(): import sys data = sys.stdin.read().splitlines() t = int(data[0].strip()) out_lines = [] line_idx = 1 for _ in range(t): s = data[line_idx].strip() line_idx += 1 n = len(s) removals = [] i = 0 while i < n: # Check twone if i + 4 < n and s[i] == 't' and s[i+1] == 'w' and s[i+2] == 'o' and s[i+3] == 'n' and s[i+4] == 'e': removals.append(i+3) # 1-indexed: i+3 i += 5 continue if i + 2 < n: if s[i] == 'o' and s[i+1] == 'n' and s[i+2] == 'e': removals.append(i+2) # 1-indexed: i+2 i += 3 continue if s[i] == 't' and s[i+1] == 'w' and s[i+2] == 'o': removals.append(i+2) i += 3 continue i += 1 out_lines.append(str(len(removals))) if removals: # convert to string out_lines.append(' '.join(map(str, removals))) sys.stdout.write('\n'.join(out_lines))

    But note: When there are multiple test cases, we need to ensure proper separation. If we just join all lines with newline, it's fine because after each test case we output either 1 or 2 lines. For a case with r=0, we output one line. Then next case starts on the next line. That matches.

    However, careful: In the sample output for case with r=0, there is a blank line? Actually they show:

    2 6 3 0

    3 ...

    The "0" is on its own line, and then "3" is on the next line. So that's exactly one line for "0". So our output would be:

    2 6 3 0 3 4 1 7 2 1 4

    But note that the sample output had a trailing space after "4 1 7 " and after "1 4"? It shows "4 1 7 " and "2" then "1 4". Probably they printed a space after last number. We don't need to do that. We'll just join without trailing space.

    Now check with second sample: They have outputs like:

    6 18 11 12 1 6 21 1 1 1 3 1 2 1 6 0

    1 4 0

    1 1 2 1 11

    Wait the formatting is messy in the statement. Let's try to interpret: There are 10 test cases, outputs shown with spaces and line breaks. Our output should be similar but without trailing spaces is fine.

    Now we should test the algorithm with some tricky cases to ensure no off-by-one and no missing patterns.

    Let's implement and run mentally.

    Case: "ttttwo": s = t t t t w o. length 6. positions: 1:t,2:t,3:t,4:t,5:w,6:o. Our scan: i=0: check twone? i+4=4<6? i=0, i+4=4, yes, but s[0]=t,1=t,2=t,3=t,4=w? not twone. Then i+2<6? i=0, check s[0:3]="two"? s[0]=t,1=t,2=t -> no. i++ -> i=1: check twone? i+4=5<6? yes, s[1]=t,2=t,3=t,4=w,5=o -> t,t,t,w,o not twone. Check two? s[1]=t,2=t,3=t -> no. i=2: similar, no. i=3: check twone? i+4=7>6, skip. Check two? i+2=5<6? i=3, i+2=5, s[3]=t,4=w,5=o? Actually s[3]=t,4=w,5=o? Wait original: indices 0:t,1:t,2:t,3:t,4:w,5:o. So at i=3: s[3]=t,4=w,5=o -> that's "two"! Yes, because t w o. So detect "two" at i=3, add removal i+2=5? i=3 -> i+2=5, position 5 (1-indexed) which is w? Actually position 5 is w? Let's map 1-index: 1:t,2:t,3:t,4:t,5:w,6:o. So removal position 5 (w). Then i+=3 -> i=6, end. So removals: [5]. That's 1 deletion. Sample output for "ttttwo" (the 5th test case in second sample) is:

    1 6

    ? Actually the second sample output for "ttttwo" is given as:

    1 6

    In the note: After the outputs: they listed:

    ... ttttwo -> output: 1 \n 6 ttwwoo -> 0

    Let's check the provided second sample output block:

    Output:

    6 18 11 12 1 6 21 1 1 1 3 1 2 1 6 0

    1 4 0

    1 1 2 1 11

    It seems each test case output is two lines except when r=0. Let's parse:

    Test case 1 output: 6 18 11 12 1 6 21

    Test case 2: 1 1

    Test case 3: 1 3

    Test case 4: 1 2

    Test case 5: 1 6

    Test case 6: 0

    Test case 7: 1 4

    Test case 8: 0

    Test case 9: 1 1

    Test case 10: 2 1 11

    So for "ttttwo" (test case 5), they output 1 and 6. Our algorithm gave removal position 5. Which is correct? Let's check the string "ttttwo": positions: 1:t,2:t,3:t,4:t,5:w,6:o. The forbidden substring "two" appears at positions 4-6? Because positions 4=t,5=w,6=o -> that's "two". So to break it, we can remove any of positions 4,5,6. Their output removes position 6 (o). Ours removes position 5 (w). Both are valid. So it's fine.

    Now test case 9: "oneeeee" -> s: o n e e e e e? Actually "oneeeee": length 7? Let's compute: "one" + "eeee"? That is o n e e e e e. So positions: 1:o,2:n,3:e,4:e,5:e,6:e,7:e. There is "one" at 1-3. Our algorithm: i=0, detect "one", remove position 2 (n). i+=3 -> i=3. i=3: check twone? i+4=7<7? i+4=7, n=7, need i+4 < n? Actually condition i+4 < n (since indices 0..n-1, i+4 must be <= n-1). At i=3, i+4=7, n=7, so i+4 == n, not <; so no. Check two/one: i+2<7? i+2=5<7, s[3]=e, s[4]=e, s[5]=e -> not. So i++ eventually. So removal: pos2 only. Sample output for "oneeeee" is 1 and 1? Actually test case 9 output: 1, then 1. That means they removed position 1 (the 'o'). Both are valid. So fine.

    Now test case 10: "oneeeeeeetwooooo": Let's parse: "oneeeeeee" + "twooooo"? Actually string: "oneeeeeeetwooooo" - we can count: one + 7 e's? Let's see: "oneeeeeee" is o n e e e e e e e? Actually "one" then "eeeeee" is 6 e's? But the string: "oneeeeeeetwooooo" - maybe it's "one" + "eeeeee" + "two" + "ooooo"? But anyway. Our algorithm should compute 2 removals. Sample output: 2, positions 1 11. So that's plausible.

    Thus algorithm seems correct.

    Now we need to consider that the total length is up to 1.5e6, and t up to 1e4. Our algorithm uses simple loops and condition checks, which is fine.

    Potential improvement: We can also use a more compact loop: iterate i from 0 to n-1, but the skipping logic is fine.

    Now edge Cases: When the string length < 3, no pattern can exist, so r=0. Our loop will not enter any checks because i+2 < n fails, etc. So removals empty.

    Now one more nuance: When we skip after detecting "twone", we skip 5. But is it possible that skipping 5 could cause us to miss a pattern that starts within the skipped region but after we delete the 'o'? However, we've already decided to delete the 'o'. The remaining part of the skipped region (indices i+3 and i+4) are 'n' and 'e'. After deletion of 'o', could there be a new pattern that involves the 'n' and 'e' and a character after the skipped region? For example, consider s = "twonen"? That is t w o n e n. The "twone" covers indices 0-4. After deleting the 'o' (index 2), the string becomes t w n e n. Could there be a new "one" starting at the 'n'? Let's examine: t w n e n: we need "one": o,n,e. No o. Could there be "two"? t,w,? next is n, not o. So no. But consider s = "twonee"? After deleting 'o', we get t w n e e. No. What about s = "twonetwo"? That is "twone" + "two". After handling "twone" at start, we skip to i=5, then we will process the remaining "two". So it's fine. So skipping 5 is safe because any pattern that would start at i+3 or i+4 would have its first character at the 'n' or 'e', which cannot start "one" (needs 'o') or "two" (needs 't'). But could there be a pattern starting at i+2? That's the 'o' we removed, so gone. Starting at i+3? 'n' can't start "one" or "two". Starting at i+4? 'e' can't start. So safe.

    But what about a pattern that starts at i+5? That is after the skipped region, we start scanning from there. So no missed.

    Now, after detecting "one" or "two", we skip 3. Is it safe? For "one", after deleting the middle 'n', we have o and e adjacent. The next pattern could start at i+2? That's the original 'e', which can't start "one" or "two". i+3 is the next character, which we will consider because we set i to i+3. So we will start scanning at i+3, which is the character after the original pattern. However, could there be a pattern that starts at i+1? That's the 'n' we removed, gone. i+2 is 'e' can't start. So safe.

    For "two", after deleting 'w', we have t and o adjacent. t can start "two"? But original t at i, after deletion, the character at i is still t, and next is o (original i+2). Could that form "two"? For "two", we need t, w, o. With t and o adjacent, missing w. So not. Could there be a pattern starting at i+2 (the 'o')? 'o' can start "one"? Possibly if there is an 'n' and 'e' after. But i+2 is the 'o', which is now adjacent to i+3 after deletion? Actually after deleting w, the characters are: t (i), o (i+2), and then i+3, i+4... So the substring starting at i+2 (o) could be "one" if the following are n and e. That's possible. But note that in our scanning, after processing the "two" at i, we skip to i+3. That means we will not consider the pattern starting at i+2 because i+2 < i+3. But could that pattern be a valid "one" that we need to break? It might be a separate "one" that originally existed or could be newly formed? Let's analyze.

    Scenario: string = "twone" we handle as twone, not as separate two+one. So that case is covered.

    But consider string = "twoone"? That is t w o o n e. As we saw, this is not overlapping because there is an extra 'o'? Actually "twoone": positions: 0:t,1:w,2:o,3:o,4:n,5:e. There is "two" at 0-2, and "one" at 3-5? Wait "one" needs o,n,e. At 3=o,4=n,5=e -> yes, "one" at 3-5. So there is a "two" followed by a separate "one" with a gap? Actually they are adjacent? The "two" ends at index2 (o), and the "one" starts at index3 (o). So they are separate, not overlapping. Our algorithm: i=0 detect "two" (since s[0:3]="two")? s[0]=t,1=w,2=o -> yes. So we add removal i+2=2? Actually i=0 => removal pos 2? That would be position 2 (w). Then i+=3 -> i=3. At i=3, we check: first check twone? i+4=7>5, skip. Then check "one"? s[3]=o,4=n,5=e -> yes, add removal i+2=5? i=3 => removal pos 5 (n). So removals: positions 2 and 5. After deletions, string becomes: t, o, o, e? Actually removed w (pos2) and n (pos5). Remaining: pos1:t, pos3:o, pos4:o? Wait careful: positions: 1:t,2:w,3:o,4:o,5:n,6:e. Remove pos2 (w) and pos5 (n). Remaining: 1:t,3:o,4:o,6:e => "tooe". No "one" or "two". So safe. But note: Could there be a pattern starting at i+2 after processing "two"? i+2 is index2 (the 'o' at original position 3? Actually after i=0, i+2=2 (0-index) which is the third character of the "two": that's 'o'. This 'o' could be the start of the "one" at positions 2,3,4? But originally positions 2,3,4 are o,o,n -> not "one". After deletion of w (position 2), the characters shift? But we are not physically deleting; the indices remain. However, the "one" we later process at i=3 is at original positions 3,4,5? Actually "one" at positions 3,4,5 (0-index: 3:o,4:n,5:e? Wait original: index3=o,4=n,5=e? But in "twoone", index3=o, index4=n, index5=e? Actually "twoone": letters: t w o o n e. So indices: 0:t,1:w,2:o,3:o,4:n,5:e. So the "one" is at indices 3,4,5: o,n,e. So it starts at index3, not index2. So the 'o' at index2 is not part of that "one". So we didn't miss anything.

    Now consider a more tricky scenario: "twwo"? Not.

    Consider "twon" maybe? Not.

    But there is a scenario: After processing a "two", we skip to i+3, but what if there is an "one" that starts at i+2 (the third character of the "two") and that "one" is valid? For that to happen, we need the characters at i+2, i+3, i+4 to be 'o','n','e'. But in a "two", i+2 is 'o'. So if s[i+2]='o', s[i+3]='n', s[i+4]='e', then we have "twone" which is the overlapping case. But we should have detected it as "twone", not as a separate "two". Because at i, we would have s[i]='t', s[i+1]='w', s[i+2]='o', s[i+3]='n', s[i+4]='e'. That's exactly the condition for "twone". However, our algorithm first checks for "twone" before checking "two". So at i, we would see the "twone" and handle it accordingly, not the "two". Therefore, when we are in the branch that handles "two", it is guaranteed that the next two characters after the 'o' are not "ne" forming "twone". So i+2 cannot be the start of a valid "one". But could there be an "one" starting at i+2 that is not part of "twone"? That would require s[i+2]='o', s[i+3]='n', s[i+4]='e'. That's exactly "one". So if that holds, then we are in the "twone" case. So not possible.

    Thus, after handling a "two" (i.e., we are in the else-if for "two"), there is no "one" starting at i+2. However, could there be an "one" starting at i+1? That would require s[i+1]='o', but s[i+1]='w' for a valid "two", so no.

    Thus, skipping 3 after a "two" is safe.

    Similarly, after handling a "one", could there be a "two" starting at i+1 or i+2? At i for "one", s[i]='o', s[i+1]='n', s[i+2]='e'. For a "two" to start at i+1, need s[i+1]='t', but it's 'n'; at i+2, need s[i+2]='t', but it's 'e'; so no.

    Thus, skipping 3 is safe.

    So the algorithm is sound.

    Now we need to implement with care about indices and performance.

    Potential improvement: Use string slicing? But slicing s[i:i+5] creates new substring, which could be okay but maybe heavy for large n? However total length 1.5e6, slicing is O(k) each time but we skip many indices; overall operations O(n) still, because each character is examined a constant number of times. But slicing in Python creates new strings? Actually s[i:i+5] creates a new string of length up to 5, which is small but could be overhead. We can instead compare characters directly using if statements to avoid allocation, which is also simple. We already did that.

    But we can also use a for loop with while. That's fine.

    Now consider memory: reading all lines into a list is fine since total input size up to ~1.5e6 + t lines, which is within memory.

    Now we need to output possibly up to 1.5e6 indices (worst-case each character removed, but that won't happen because r can't exceed n, but total indices across all test cases could be up to sum of lengths, which is 1.5e6. That's okay for output.

    Now we should ensure that our algorithm indeed yields minimum deletions. We argued it's optimal. But let's confirm with some random testing vs brute-force for small strings to be thorough. Since we are reasoning, but might be safe.

    But there is a nuance: In overlapping "twone", we always delete the middle 'o'. Could there be a scenario where deleting the 'o' is not optimal because it might create new patterns? Let's test "twoneo"? s = t w o n e o. After deleting 'o' (position 3), we get t w n e o. Check for patterns: "twn"? no; "wne"? no; "neo"? no; "two"? no; "one"? need o,n,e: we have n,e,o? Not. So safe. Another: "atwoneb"? safe.

    Now consider a string like "ttwone"? The "twone" is there. Delete 'o', get t t w n e? Actually original: t t w o n e. Deleting the 'o' yields t t w n e. No patterns.

    Thus safe.

    Now we can implement.

    But one more thing: The patterns are case-sensitive, all lowercase letters, no uppercase. So fine.

    Now time to code.

    We'll write a function solve() and call it if name == "main".

    Implementation details:

    def solve(): import sys input = sys.stdin.readline t = int(input()) out = [] for _ in range(t): s = input().strip() n = len(s) removals = [] i = 0 while i < n: # check twone if i + 4 < n and s[i] == 't' and s[i+1] == 'w' and s[i+2] == 'o' and s[i+3] == 'n' and s[i+4] == 'e': removals.append(i+3) # 1-indexed i += 5 elif i + 2 < n: if s[i] == 'o' and s[i+1] == 'n' and s[i+2] == 'e': removals.append(i+2) i += 3 elif s[i] == 't' and s[i+1] == 'w' and s[i+2] == 'o': removals.append(i+2) i += 3 else: i += 1 else: i += 1 out.append(str(len(removals))) if removals: out.append(' '.join(map(str, removals))) sys.stdout.write('\n'.join(out))

    But careful: In the "twone" condition, we used i+4 < n, i.e., i+4 is at most n-1, so we have five characters from i to i+4 inclusive. That's correct.

    Now about the removal index for "twone": we used i+3. Let's verify: i is 0-indexed start of "twone". The 'o' is at index i+2. So 1-indexed position is (i+2)+1 = i+3. So correct.

    For "one" and "two", i+2 is correct as (i+1)+1.

    Now test with sample: "onetwone": s length 8. i=0: not twone (i+4=4<8, s[0]='o' not 't'), so check "one"? s[0]='o',1='n',2='e' -> yes, add i+2=2, i+=3->i=3. i=3: i+4=7<8, s[3]='t',4='w',5='o',6='n',7='e' -> yes twone, add i+3=6, i+=5->i=8 done. So removals: [2,6]. Output: "2\n2 6"? But sample had "2\n6 3". So ours is "2 6". That's fine.

    Now check "oneoneone": i=0: one -> add 2, i=3; i=3: one? s[3]='o',4='n',5='e' -> add 5, i=6; i=6: one? s[6]='o',7='n',8='e' -> add 8? i=6 -> i+2=8, i=9 done. So removals: [2,5,8]. Output "3\n2 5 8". Sample had "4 1 7". Both okay.

    Now "twotwo": i=0: two -> add 2, i=3; i=3: two -> add 5, i=6 done. removals [2,5]. Sample: "2\n1 4". Acceptable.

    Now test "two": length 3. i=0: check twone? i+4=4 not <3. check two? yes add i+2=2? i=0 -> i+2=2 (1-indexed position 2). i+=3 -> i=3 done. removals [2]. Sample output for "two" in second sample: test case 2: output "1\n1". That means they removed position 1 (the 't')? Actually for "two", positions: 1:t,2:w,3:o. Our removal pos2 is also valid. So fine.

    Now test "one": similarly.

    Now test "ttttwo": i=0..2 no match, i=3: two add 5 (i=3 -> i+2=5), i=6 done. removal [5]. Sample had [6]. Both okay.

    Now test "twone" (just that): s="twone". i=0: twone -> add i+3=3, i+=5->i=5 done. removals [3]. So we remove the 'o' at position 3. After removal, string becomes "twne", no pattern. Good.

    Now test "twoneonetwone"? Might be complicated but okay.

    Now the algorithm seems correct.

    But we should also consider the possibility of overlapping "twone" patterns consecutively, like "twonetwone". That's two "twone" patterns starting at indices 0 and 5? Actually "twonetwone": length 10? Let's see: "twone" (5) + "twone" (5) => indices 0-4 and 5-9. Our algorithm: i=0 detect twone, add 3, i=5; i=5 detect twone, add 8, i=10. So removals [3,8]. That's fine.

    Now what about "twonetwo"? i=0 twone add 3, i=5, then i=5 check twone? i+4=9? n=8? Actually length: "twonetwo" is 8? "twone" is 5, plus "two" is 3, total 8. So after first, i=5, i+4=9>=8, so not twone; then check two: s[5]='t',6='w',7='o' -> yes, add i+2=7, i=8. So removals [3,7]. That's two deletions. Is that optimal? Possibly yes, because "twone" and "two" are separate clusters? But are they separate? The "two" starts at index5, which is after "twone". There is no overlap because the "twone" ends at index4, "two" starts at 5. So need at least two deletions. Good.

    Now consider "one two" with a space? But only lowercase letters, no spaces.

    Thus algorithm is solid.

    We should also note that the problem constraints: total length up to 1.5e6, t up to 1e4. Our code runs O(total length) which is fine.

    Now potential pitfalls: When reading input with sys.stdin.readline, we need to strip newline. Ensure that we handle empty lines? Not.

    Now we can finalize.

    But let's double-check the output format: They print indices in any order. We output in the order we find them, which is increasing because we scan left to right and append positions. That's fine.

    Now I'll produce final answer.

    But wait, there is one more subtlety: Could there be overlapping patterns where "two" and "one" share more than one character? Possibly if the string contains "twone" but also maybe "one" inside "two"? Already covered.

    What about "one" and "two" overlapping in a different way: e.g., "tone"? This contains "one" but not "two" overlapping with something else? "tone" has "one" at positions 2-4? Actually "tone": t,o,n,e. So "one" at indices 2-4? 2:o,3:n,4:e? Actually 1-index: 1:t,2:o,3:n,4:e -> "one" at 2-4. There is no "two". So no overlap.

    Thus all good.

    Now consider a more complex case: "ttwoone". That's t t w o o n e. Let's parse: indices: 1:t,2:t,3:w,4:o,5:o,6:n,7:e. Forbidden substrings: "two"? at positions? 2-4: t,w,o? Actually 2:t,3:w,4:o -> yes, "two" at 2-4. Also "one"? 5-7: o,n,e -> yes. So we have "two" at 2-4 and "one" at 5-7. They are separate (non-overlapping) because "two" ends at 4, "one" starts at 5. Our algorithm: i=0: s[0]='t' not? Actually i=0: check twone? i+4=4<7, s[0]=t,1=t,2=w,3=o,4=o -> not twone. Check two? s[0]=t,1=t,2=w -> no. i=1: i=1: check twone? i+4=5<7, s[1]=t,2=w,3=o,4=o,5=n -> t,w,o,o,n -> not. Check two? s[1]=t,2=w,3=o -> yes, add i+2=3 (pos3? i=1 -> i+2=3, position 3 is w? Actually 1-index: i=1 corresponds to position2? Wait: i is 0-indexed. So i=1 corresponds to original index1 (second character). Then i+2=3 gives position 3. But which character is at position 3? 1:t,2:t,3:w,4:o,5:o,6:n,7:e. So position3 is w. So removal pos3 (w). Then i+=3 -> i=4. At i=4: check twone? i+4=8>7 skip. Check one? i+2=6<7, s[4]=o (index4? careful: i=4 0-index corresponds to position5? Actually positions: 0:t(pos1),1:t(pos2),2:w(pos3),3:o(pos4),4:o(pos5),5:n(pos6),6:e(pos7). So at i=4, s[4]=o (pos5). Then s[5]=n (pos6), s[6]=e (pos7) => "one". So add removal i+2=6 (pos6? i=4 -> i+2=6, position 6 is n). So removals: pos3 and pos6. After removal: positions 1:t,2:t,4:o,5:o,7:e -> "ttooe"? Actually keep: 1:t,2:t,4:o,5:o,7:e => "ttooe". No patterns. Good.

    Now what if we had "twwoo"? etc.

    Thus algorithm passes.

    Now final note: The sum of lengths up to 1.5e6. In Python, using while loop with many condition checks is fine. We can also use for i in range(n): but we need to skip sometimes. Using while is easier.

    Edge Cases: Very long string with many patterns. The algorithm will process quickly.

    Now I think we can produce final answer.

    But before finalizing, we must ensure that the indices we append are integers. Use i+2 or i+3 as described. But careful: When i is 0-indexed, i+2 is the 1-indexed position of the middle character? Let's test: s = "abc", i=0, middle char is at index1 (0-index) which is position 2 in 1-index. So i+2=2 correct. So our conversion is correct.

    Double-check for "twone": i=0, middle char at index2 (0-index) => position3. So i+3=3 correct.

    Now confirm with sample "onetwone": we got [2,6]. That's positions 2 (n) and 6 (o). That is valid. But sample had [6,3] (positions 6 and 3). So both okay.

    Now produce final code.

    We'll also consider using sys.stdout.write with join to reduce overhead.

    One more thing: In the output, there should be no extra spaces at line ends. Our join will produce numbers separated by spaces without trailing space.

    Now finalize.

    But there is another potential nuance: The problem statement says "the indices themselves for removal in any order". So we can output any order, even unsorted. Our order is increasing as we encounter patterns. That's fine.

    Now I'll write final answer.

    But before concluding, I'd like to test some more edge cases manually to ensure no oversight:

    Case: "twotone"? s: t w o t o n e. This has "two" at 1-3, and "one" at 5-7? Actually positions: 1:t,2:w,3:o,4:t,5:o,6:n,7:e. "one" at 5-7: o,n,e? Yes. They are separate. Our algorithm: i=0 detect "two"? s[0]=t,1=w,2=o -> yes, add pos2 (w), i=3. i=3: check twone? i+4=7<7? i+4=7, n=7, i+4<7? Actually need i+4 < n? n=7, i+4=7, not <, so no. Check "two"? s[3]=t,4=o,5=n? Actually s[3]=t,4=o,5=n -> not "two". Check "one"? s[3]=t,... no. i=4: check "one"? s[4]=o,5=n,6=e -> yes, add i+2=6 (pos6? i=4 -> i+2=6, position 6 is n), i=7. So removals [2,6]. After removal: positions 1:t,3:o,4:t,5:o,7:e? Actually removed w (2) and n (6). Remaining: 1:t,3:o,4:t,5:o,7:e => "totoe". No patterns. Good.

    Case: "oneonetwo": s: o n e o n e t w o. This has "one" at 1-3, "one" at 4-6, and "two" at 7-9. Our algorithm: i=0: one -> add 2, i=3; i=3: one -> add 5, i=6; i=6: two -> add 8, i=9. removals [2,5,8] (positions 2,5,8). After removal: keep positions 1,3,4,6,7,9? Actually remove 2,5,8: that removes n (pos2), n (pos5), w (pos8). Remaining: 1:o,3:e,4:o,6:e,7:t,9:o -> "oeoeto". Check for patterns: "oeo"? no; "eoe"? no; etc. So fine.

    But could there be a better solution? Maybe we could delete only 2 characters? For instance, if we delete the 'e' at position 3 and 'o' at position 7? Let's test: remove positions 3 and 7: after removal, string: o n ? Actually original: 1:o,2:n,3:e,4:o,5:n,6:e,7:t,8:w,9:o. Remove 3 and 7: keep 1,2,4,5,6,8,9: o,n,o,n,e,w,o -> "ononewo". This has "one"? at positions? 1-3: o,n,o -> no; 2-4: n,o,n -> no; 3-5: o,n,e -> that's "one"! Actually indices after removal: we need to consider adjacency: after removal, the sequence is: 1:o,2:n,4:o,5:n,6:e,8:w,9:o. The substring at positions 2,4,5? Wait they must be consecutive in the new string. Let's re-index: after removal, we have characters at original indices 1,2,4,5,6,8,9. In order: pos1:o, pos2:n, pos4:o, pos5:n, pos6:e, pos8:w, pos9:o. So the new string is: o n o n e w o. Consecutive triples: 1-3: o,n,o -> no 2-4: n,o,n -> no 3-5: o,n,e -> "one"! Indeed the third, fourth, fifth characters: o (from original4), n (original5), e (original6) -> "one". So still has "one". So 2 deletions not enough. So 3 is optimal. So our algorithm yields minimal.

    Now let's try a scenario where overlapping pairs could be more than two? Possibly if we have "twoneone"? But we argued that the "one" after "twone" is separate. So cluster size is at most 2.

    Thus algorithm is correct.

    Now we should also consider the possibility of a pattern like "one" inside "twone" if we don't handle "twone" first. But we check "twone" first, so we treat it as cluster.

    Now about the skipping: In the code, after handling "twone", we do i += 5 and continue. But what if i+4 < n fails because we are near end? Already handled.

    Now I think we are ready.

    But we might also think about using regular expressions or something, but not needed.

    Now code in Python.

    We'll use sys.stdin.read to read all input at once for speed? But reading line by line is fine.

    However, since t can be up to 1e4 and total length 1.5e6, using sys.stdin.readline in a loop is fine.

    Now finalize.

    One more check: The input format: first line integer t, then t lines each with a string. The strings may be empty? Problem says non-empty string s. So not empty.

    Now produce final answer.

    But I'd like to test with provided second sample manually to ensure output format matches expected not exactly but acceptable.

    We'll simulate quickly:

    Test case 1: "onetwonetwooneooonetwooo". Let's compute using algorithm. But we trust.

    Now we must ensure that for each test case we print exactly the required lines.

    Potential bug: If we use input().strip(), it removes whitespace. That's fine.

    Now ready.

    One more thing: In the while loop, when checking "twone", we have condition i+4 < n. If n is exactly 5, i=0, i+4=4, n=5, so i+4 < n is true because 4<5. So we check correctly.

    Now we need to be careful about Python indexing: s[i] works.

    Now final code.

    We'll include if name == "main": solve().

    Now I'll produce final answer. ```python import sys

    def solve() -> None: it = iter(sys.stdin.read().splitlines()) t = int(next(it)) out_lines = [] for _ in range(t): s = next(it).strip() n = len(s) removals = [] i = 0 while i < n: # check "twone" if i + 4 < n and s[i] == 't' and s[i+1] == 'w' and s[i+2] == 'o' and s[i+3] == 'n' and s[i+4] == 'e': # remove the middle 'o' (0-index i+2, 1-index i+3) removals.append(i + 3) i += 5 continue if i + 2 < n: if s[i] == 'o' and s[i+1] == 'n' and s[i+2] == 'e': # remove the middle 'n' (0-index i+1, 1-index i+2) removals.append(i + 2) i += 3 continue if s[i] == 't' and s[i+1] == 'w' and s[i+2] == 'o': # remove the middle 'w' (0-index i+1, 1-index i+2) removals.append(i + 2) i += 3 continue i += 1 out_lines.append(str(len(removals))) if removals: out_lines.append(' '.join(map(str, removals))) sys.stdout.write('\n'.join(out_lines))

    if name == "main": solve()