Skip to content
TheChatArchiveThe Chat Archive
DeepSeekDeepseek v3.2· deepseekHugging Face Frontier Reasoning Traces

There are given n men and n women. Each woman ranks all men in order of her preference…

  1. User

    There are given n men and n women. Each woman ranks all men in order of her preference (her first choice, her second choice, and so on). Similarly, each man sorts all women according to his preference. The goal is to arrange n marriages in such a way that if a man m prefers some woman w more than his wife, and w prefers m more then her husband a new marriage occurs between w and m. If w prefers her husband more, then she stays married to him. This problem always has a solution and your task is to find one. Input The first line contains a positive integer t ≤ 100 indicating the number of test cases. Each test case is an instance of the stable marriage problem defined above. The first line of each test case is a positive integer n ≤ 500 (the number of marriages to find). The next n lines are the woman's preferences: ith line contains the number i (which means that this is the list given by the ith woman) and the numbers of men (the first choice of ith woman, the second choice,...). Then, the men's preferences follow in the same format.

    Output For each test case print n lines, where each line contains two numbers m and w, which means that the man number m and the woman number w should get married.

    Example

    Input: 2 4 1 4 3 1 2 2 2 1 3 4 3 1 3 4 2 4 4 3 1 2 1 3 2 4 1 2 2 3 1 4 3 3 1 2 4 4 3 2 4 1 7 1 3 4 2 1 6 7 5 2 6 4 2 3 5 1 7 3 6 3 5 7 2 4 1 4 1 6 3 2 4 7 5 5 1 6 5 3 4 7 2 6 1 7 3 4 5 6 2 7 5 6 2 4 3 7 1 1 4 5 3 7 2 6 1 2 5 6 4 7 3 2 1 3 1 6 5 4 3 7 2 4 3 5 6 7 2 4 1 5 1 7 6 4 3 5 2 6 6 3 7 5 2 4 1 7 1 7 4 2 6 5 3

    Output: 1 3 2 2 3 1 4 4 1 4 2 5 3 1 4 3 5 7 6 6 7 2

    Warning: large Input/Output data, be careful with certain languages

  2. DeepSeek Assistant

    We need to solve the stable marriage problem. The description: "The goal is to arrange n marriages in such a way that if a man m prefers some woman w more than his wife, and w prefers m more then her husband a new marriage occurs between w and m. If w prefers her husband more, then she stays married to him. This problem always has a solution and your task is to find one."

    That's exactly the definition of a stable matching. So we need to output any stable matching (usually the man-optimal or woman-optimal). Usually the Gale-Shapley algorithm is used. The problem statement seems to describe the man-proposing algorithm: men propose to women, if woman prefers this new proposal over current engagement, she accepts, else rejects. That yields a stable matching. The example output: For first test case n=4, the output is: 1 3 2 2 3 1 4 4

    We can check: Men preferences: After women's preferences, the men's lists are given. For test case 1: Women: 1: 4 3 1 2 2: 2 1 3 4 3: 1 3 4 2 4: 4 3 1 2

    Men: 1: 3 2 4 1 2: 2 3 1 4 3: 3 1 2 4 4: 3 2 4 1

    Now, apply Gale-Shapley man-proposing. Let's compute.

    Men propose in some order? Usually we iterate through free men. Let's simulate: All men free initially. Man1 proposes to his top: woman3. Man2 proposes to woman2. Man3 proposes to woman3? his top: woman3? Actually man3's list: 3 1 2 4 -> top is woman3. Man4 proposes to woman3? man4: 3 2 4 1 -> top is woman3.

    But algorithm: while there is free man, he proposes to the next woman on his list not yet proposed to. So we need to simulate systematically.

    We'll do it: Start with all men free. Queue of free men (or iterate). Let's simulate with typical algorithm:

    Initialize: each man has an index of next proposal (0). Keep arrays: wife[m], husband[w] = -1 (unmatched). For each woman, we might need a ranking map (man->rank) for O(1) comparisons.

    Women's preferences are given as a list. For woman i, list of men in order of preference (first choice highest). So we can create a rank array rankW[w][m] = position (lower is better). Similarly for men's lists but we only need to iterate.

    Now simulate:

    We can use a queue (or list) of free men. Or just loop through men repeatedly.

    I'll simulate stepwise.

    All men free: M1, M2, M3, M4.

    M1: next proposal index=0 -> woman3. Propose to W3. W3 free, so engage: wife[1]=3, husband[3]=1. M1 not free. Remove from free.

    M2: propose to W2 (first choice). W2 free: engage M2-W2. M2 not free.

    M3: propose to W3 (first choice). W3 currently engaged to M1. Check W3's preference: W3's list: 1 3 4 2. So M1 is at position? rank of M1 = 1 (first), rank of M3 = 2? Let's check: W3's list: "1 3 4 2". So order: 1,3,4,2. So M1 rank 1, M3 rank 2. So M3 is less preferred than M1? Actually M3 is after M1, so M3 is lower. So W3 prefers current M1 over M3. So she rejects M3. M3 remains free, increment his next proposal index to 1 (next woman: woman1? His list: 3 1 2 4 -> index1 is woman1). Continue loop.

    M4: propose to W3 (first choice). W3 engaged to M1. Compare M4 vs M1 in W3's list: M4 rank? W3 list: 1,3,4,2 -> M4 is at position 3? Actually list: 1,3,4,2 -> so order: 1 (first), 3 (second), 4 (third), 2 (fourth). So M4 rank 3, M1 rank 1. So M1 better, reject M4. M4 remains free, next proposal index=1 -> woman2? Man4 list: 3 2 4 1, next is woman2.

    Now free men: M3, M4.

    M3: propose to next (index1): woman1. W1 currently? Not engaged (since only W3 and W2 engaged). So W1 free -> engage M3-W1. M3 becomes engaged, wife[3]=1, husband[1]=3.

    M4: propose to next: woman2. W2 is engaged to M2. Compare M4 vs M2 in W2's preferences: W2 list: 2 1 3 4. So order: 2 (first), 1 (second), 3 (third), 4 (fourth). So M2 rank 1, M4 rank 4. W2 prefers current M2. Reject M4. M4 free, next index=2 -> woman4.

    Now free men: M4 only.

    M4: propose to woman4 (index2). W4 currently? Not engaged? Engagements: W3-M1, W2-M2, W1-M3. W4 free. So engage M4-W4. Now all matched. Result: M1-W3, M2-W2, M3-W1, M4-W4.

    That yields pairs: (1,3), (2,2), (3,1), (4,4). That's exactly the sample output. So indeed they use man-proposing Gale-Shapley.

    Thus, for each test case, implement the algorithm with n up to 500, t up to 100. O(n^2) per test case (since each man proposes at most n times, and we need O(1) per proposal by using precomputed woman rankings). That's fine.

    Now input format: The first line t. For each test case: n. Then next n lines: "i ..." where i is the woman number, then n numbers: the men in order of her preference (first choice first). Then next n lines: similarly for men: "i ..." where i is man number, then n numbers: women in order of his preference.

    Note: The numbers for men and women are 1-indexed and appear to be from 1 to n. In the input, the first integer on each line is the person's index, which we can read and ignore (or use to verify). The subsequent n integers are preferences. For men's lists, they list women; for women's lists, they list men.

    We need to output n lines per test case: each line "m w" meaning man m married to woman w. The sample output matches the man-optimal stable matching from man-proposing.

    So implement: For each test case:

    • Read n.

    • For women: create an array wPref[1..n][1..n] (list) and wRank[1..n][1..n] (rank index). Actually we only need rank for quick comparison. So for each woman w, read line: first token is w, then n men ids. Store the list if needed? Not necessary after rank built? In algorithm, we need to know next proposal for each man, which is from his own list. For woman, we need to compare two men: which is preferred. So we can just store rankW[w][m] = position (0-based perhaps). So reading: For i in 1..n: read w, then for j from 0 to n-1: read m, set wPref[w][j] = m (or just set rankW[w][m] = j). Also maybe we don't need wPref after rank. But we can store both.

    • For men: read m, then n women ids. Store manPref[m] as list (size n). We'll also need nextProposalIndex[m] initially 0.

    • Implement: wife[m] = -1, husband[w] = -1. freeMen = queue of all men initially.

    • While freeMen not empty: pop m. Let nextIdx = nextProp[m]; if nextIdx == n, that means he proposed to all? But algorithm ensures matching exists; he will never exhaust all because there is always a free woman? Actually with n men and n women, and everyone ranks all, the algorithm terminates with a full matching before any man runs out of proposals. So we can assert nextIdx < n. Get w = manPref[m][nextIdx]. Then increment nextProp[m] (so even if rejected, he moves on; if accepted, he becomes engaged, and we won't use him again unless he becomes free later, which can happen if he is later rejected by a woman; but in the algorithm, when a woman breaks an engagement, the man becomes free again. But note: In standard Gale-Shapley, if a woman accepts a new proposal, she breaks current engagement and that man becomes free. So we must handle that case: when a woman w is currently engaged to m' (husband[w] = m'), and receives a proposal from m, she compares. If she prefers m over m', then she becomes engaged to m, and m' becomes free (so we push m' back into freeMen). If she prefers m' over m, then she rejects m, and m remains free (so we push m back? Actually we need to continue with his next proposal. Since we popped m from freeMen, if he gets rejected, we need to push him back after incrementing his next index. But careful: Usually we loop while there is a free man, and we pick one. In implementation, we can just keep a queue of free men. When a man proposes and is rejected, he stays in the queue (or we re-add him). But we need to ensure we increment his nextProposalIndex before re-adding. So typical approach: while queue not empty: m = queue.front; queue.pop; w = manPref[m][nextProp[m]++]; // increment. Then check engagement: if husband[w] == -1: engage. Else: compare ranks. If she prefers m over current (husband[w]), then set free the current, engage m, and push current back; else, m stays free and we push m back? Actually if m is rejected, he remains free and we should push him back into the queue (since he's still free) after incrementing nextProp? But we already incremented nextProp at the start. So after rejection, we push m back into queue. However, we need to avoid infinite loops if nextProp[m] reaches n, but that shouldn't happen because matching will be found before any man exhausts list. But to be safe, we can check if nextProp[m] < n before pushing back. But algorithm ensures termination.

    But in many implementations, they don't push back after rejection; instead they have a loop that picks a free man from the set, and if rejected, they remain free, and later the loop will pick him again as long as he's free. But easier: keep a list/stack of free men; when a man is free, he is in the list. When he proposes, we remove him temporarily, then after processing, if he ends up free again (rejected) we re-add him to the list. But if we remove him at the beginning and then re-add after rejection, that's fine.

    But if we use a queue, we pop m, then after proposal, if he is accepted, we don't push him; if rejected, we push him back to the queue. However, be careful: what if the queue becomes large? That's fine.

    Alternatively, we can just iterate through a "free" array and for each free man, do proposal and update. But using a queue is standard.

    One nuance: When a woman changes engagement, the previously engaged man becomes free. We push him back.

    Thus algorithm:

    Initialize:

    • For each man m: next[m] = 0
    • wife[m] = -1 (or husband)
    • For each woman w: husband[w] = -1
    • queue = [all men 1..n] (e.g., list)

    while queue not empty: m = queue.pop_front() w = manPref[m][next[m]] next[m] += 1 if husband[w] == -1: # engage wife[m] = w husband[w] = m else: cur = husband[w] # if w prefers m over cur: if rankW[w][m] < rankW[w][cur]: # w dumps cur for m wife[cur] = -1 # cur becomes free husband[w] = m wife[m] = w # push cur back into queue queue.push(cur) else: # m is rejected queue.push(m) # remains free

    But careful: In the else case when m is rejected, we push m back into the queue. However, we already incremented next[m] for this proposal. So next time m will propose to next woman. That's correct.

    But we need to ensure that if husband[w] == -1, we don't push anyone. And we don't push m because he's engaged now.

    Potential problem: Suppose we pop m, he proposes to w, w is free, we engage. Then later, m might become free again if w dumps him for a better man. In that case we push him back. So that works.

    But there is a subtlety: When we push cur back after being dumped, cur might have already had his nextProposal index beyond his list? That is possible if cur had proposed to all women before getting engaged? But if he was engaged, that means he had found someone, and he didn't propose to all women. So when he becomes free again, he still has some women to propose to (the ones after the one he was engaged to? Actually note: In the algorithm, a man proposes sequentially, and once engaged, he stops proposing. If later he is dumped, he becomes free and continues proposing from where he left off (i.e., the next woman after the one he last proposed to, which was the one he got engaged to). However, in our implementation, we increment next[m] when we propose. When a man m (say cur) got engaged, he had just proposed to w and was accepted. At that point, his next index points to the next woman after w. So if later he gets dumped, his next index is already beyond w. That's correct. So when we push cur back, he will propose to the next woman on his list.

    Now, about when we push m back after rejection: we already incremented next[m] before the rejection. That's correct; he should not propose to the same woman again.

    Edge Cases: Ensure that we don't overflow next[m] beyond n-1. But algorithm ensures stable matching before any man exhausts all preferences. But for safety, we could check if next[m] >= n, then break? Or not push such man. But we assume input is consistent.

    Complexities: O(n^2) per test case.

    Now output: For each man m from 1 to n (or for all marriages, we can output m and wife[m]), but the sample output prints lines not necessarily sorted by man? In sample output, first test case: lines are: "1 3", "2 2", "3 1", "4 4" i.e., sorted by man number. In second test case: "1 4", "2 5", "3 1", "4 3", "5 7", "6 6", "7 2". That is also sorted by man number. So we can simply iterate m from 1 to n and print m and wife[m].

    But careful: In the algorithm, we produce wife[m] assignments. So we can output that.

    Now input parsing: The number of test cases t up to 100. n up to 500. So total lines could be up to 100*(2n+1) ~ 100*1001 = 100k lines, each with up to ~501 numbers? That's fine. But we need to be careful with fast I/O in Python. Use sys.stdin.read to read all ints quickly, or sys.stdin.buffer.

    We'll parse using sys.stdin.buffer.read and split into ints. That is efficient.

    Implementation plan:

    • Read all ints from sys.stdin.buffer.read().split() into a list of ints.
    • Use an iterator.
    • t = next int.
    • For each test case:
      • n = next int.
      • Initialize rankW = [ [0]*(n+1) for _ in range(n+1) ] # 1-indexed, rankW[w][m] = position (0-indexed).
      • For i in range(n): w = next int for pos in range(n): m = next int rankW[w][m] = pos
      • manPref = [ [] for _ in range(n+1) ]
      • for i in range(n): m = next int pref = [0]*n for j in range(n): w = next int pref[j] = w manPref[m] = pref
      • Initialize: nextProp = [0](n+1) husband = [0](n+1) # 0 indicates free? but woman indices start from 1, so we can use 0 for free. wife = [0]*(n+1) # 0 free.
      • freeMen = collections.deque(range(1, n+1))
      • While freeMen: m = freeMen.popleft()

        get next woman to propose to

        idx = nextProp[m] if idx >= n: # should not happen, but just skip? continue w = manPref[m][idx] nextProp[m] = idx + 1 if husband[w] == 0: # engage wife[m] = w husband[w] = m else: cur = husband[w] if rankW[w][m] < rankW[w][cur]: # w prefers m wife[cur] = 0 husband[w] = m wife[m] = w freeMen.append(cur) else: # w rejects m freeMen.append(m)
      • After loop, output for m in 1..n: print(f"{m} {wife[m]}")
      • Between test cases, maybe print nothing else.

    Now note: The sample output has a blank line? Actually between test cases, they just print consecutive lines. So we just print lines sequentially.

    Testing on given input should match.

    Edge Cases: n could be 0? Not, positive integer n.

    Now let's double-check second test case: n=7. I can try to compute quickly? Not needed.

    Thus solution is straightforward.

    But we must pay attention to input reading: The input lines for women and men have the index i first. The problem says "ith line contains the number i (which means that this is the list given by the ith woman) and the numbers of men (the first choice of ith woman, the second choice,...)." So we read exactly n lines for women, each with i and then n ints. The i should match the line order; but we can ignore and just use the read i as index to store. However, they might not be in order? Usually they are in order, but we can trust that i is correct and use it. The same for men.

    Potential pitfalls: The numbers for men and women are both from 1 to n. So using rankW as list of lists sized (n+1) by (n+1) is fine.

    Now ensure we convert to 0-indexed ranking? Use 0-index for rank to compare lower is better. That's fine.

    Complexity: For each proposal, we do constant work. Number of proposals is at most n^2 (worst-case each man proposes to all women). With n=500, that's 250k per test case, times t=100 => 25M proposals, okay in Python if optimized (should be fine). But we need to be careful with overhead of Python loops. 25M is maybe borderline but likely okay within typical time limits? Let's estimate: 25M iterations, each doing some array accesses and a couple of comparisons, in Python might be around 0.5-1 second? Actually 25M Python operations may be ~1-2 seconds, but plus overhead of reading input, etc. Possibly okay for typical UVA? This seems like a problem from some judge (maybe SPOJ?). I'd need to ensure efficient implementation: Use lists of ints, avoid function calls inside loops, use local variables. Use deque from collections, but popleft and append are O(1). Could also use list as stack? But we need FIFO? The order of processing free men doesn't matter for correctness. Using a simple list as stack (pop from end) might be faster because list pop() is O(1). Using deque may have some overhead. But either is fine. Actually we can use list as stack (LIFO) to simulate; order doesn't matter. So we can use a list and pop(). That might be slightly faster. But both are okay.

    Better: Use a simple list freeMen = list(range(1, n+1)) and while freeMen: m = freeMen.pop() (pop last). Then when we need to add a free man, we append (to end). That yields LIFO but it's fine. So we can implement with Python list.

    Potential issues: When we pop m and then if rejected, we append m again. This could cause endless loop if we keep popping and appending the same man with no progress? But since we always increment his nextProp index, eventually he will propose to a woman who accepts (or he runs out). So it terminates.

    Now memory: rankW is (n+1)(n+1) ints, each int is maybe 28 bytes, for n=500 ~ 501501 ~ 251k ints ~ 7 MB. That's okay.

    Alternatively, we could store for each woman a list of ranks as array of length n+1, but we already do that.

    Now about reading input: We'll use sys.stdin.buffer.read().split() to get all tokens, then map to ints. But careful: This could produce a large list of ints. For t=100, n=500, each test case has 1 + n lines for women (each line has 1 + n ints) and n lines for men (each 1 + n ints) => total ints per test case: 1 (n) + n*(n+1)2? Actually: n lines women: each 1 (index) + n (prefs) = n+1 ints per line => n(n+1) ints for women. Similarly for men: n*(n+1) ints. Plus the first n integer: total ints = 1 + 2n(n+1). For n=500, that's 1 + 2500501 = 1 + 501000 = 501001 per test case. Times 100 => ~50 million ints. That's quite large, but still manageable? 50 million ints as strings split would be huge memory (maybe 500 MB). However, typical judges might not give max t=100 and n=500 simultaneously because total input size would be huge: each line for n=500 contains up to 501 numbers, each number up to 500, average maybe 3-4 chars plus space, so line length ~2000 chars. 2n lines ~1000 lines per test, each ~2000 => 2 million chars per test, 100 tests => 200 MB text. That's a lot. Usually constraints are such that total input is not that huge. But the problem says "t ≤ 100, n ≤ 500". But typical testcases would be smaller. In any case, we should design to handle large input efficiently. Using sys.stdin.buffer.read() will read the entire input into memory; if it's 200 MB, it's large but maybe within memory limits? Possibly not. Safer to read line by line and parse ints as needed, using generators. However, Python might still handle 200 MB in memory, but it's risky. Many solutions for such problems on SPOJ (e.g., STABLEMP) use input reading line by line. But I'll try to use fast reading incremental.

    Alternate approach: use sys.stdin.buffer.readline() in a loop for each line. That avoids loading all at once. But we need to be careful about speed; reading line by line is fine.

    Given that t can be up to 100 and n up to 500, we can read with standard input line by line. But the problem warns: "Warning: large Input/Output data, be careful with certain languages." So we should use fast I/O. Using sys.stdin.buffer.readline() is decent.

    I'll implement reading with sys.stdin.buffer.readline() inside a loop. But parsing each line using split() and converting to ints is okay. However, each line may have up to 501 numbers; splitting and converting to ints for each line is fine.

    Alternatively, I could read all tokens via generator but read line by line to avoid huge memory. But storing rank arrays and pref arrays for each test case is fine.

    Plan for reading:

    import sys

    def solve(): data = sys.stdin.buffer t_line = data.readline() while t_line.strip() == b'': t_line = data.readline() t = int(t_line) for _ in range(t): # read n line line = data.readline() while line.strip() == b'': line = data.readline() n = int(line) # prepare rankW rankW = [None](n+1) # index 1..n for i in range(1, n+1): parts = list(map(int, data.readline().split())) w = parts[0] prefs = parts[1:] # prefs length n # store rank rank = [0](n+1) # we'll fill for pos, m in enumerate(prefs): rank[m] = pos rankW[w] = rank # men preferences manPref = [None](n+1) for i in range(1, n+1): parts = list(map(int, data.readline().split())) m = parts[0] prefs = parts[1:] # list of women manPref[m] = prefs # now run Gale-Shapley nextProp = [0](n+1) husband = [0](n+1) wife = [0](n+1) freeMen = list(range(1, n+1)) while freeMen: m = freeMen.pop() idx = nextProp[m] # idx < n guaranteed? w = manPref[m][idx] nextProp[m] = idx + 1 if husband[w] == 0: wife[m] = w husband[w] = m else: cur = husband[w] # compare rankW[w][m] vs rankW[w][cur] if rankW[w][m] < rankW[w][cur]: # w prefers m wife[cur] = 0 husband[w] = m wife[m] = w freeMen.append(cur) else: # w rejects m freeMen.append(m) # output out_lines = [] for m in range(1, n+1): out_lines.append(f"{m} {wife[m]}") sys.stdout.write("\n".join(out_lines) + "\n") # maybe add newline between test cases? sample shows no extra blank line. # But to separate test cases, the sample outputs them consecutively without extra blank line. # So just newline after each test case, and next test case's output will start on next line.

    if name == "main": solve()

    But careful: The reading of women's lines: we assume exactly n lines, each with correct i. However, they might have blank lines in between? The problem statement doesn't mention blank lines. But sometimes judges have blank lines. We handle by skipping empty lines? I added while line.strip()==b'' but only for the n line? Could be for all reads. Safer: define a function that reads next non-empty line. However, given typical input, no blank lines. I'll not overcomplicate. But to be safe, after reading n, we read exactly n lines for women and n for men; if any of those lines is empty? Unlikely.

    But note: The input example shows each line for preferences contains the person's number, then the preferences separated by spaces. So it's fine.

    Now, test with the provided input.

    Let's simulate quickly in code mentally? It's fine.

    One more nuance: In the algorithm, we used "husband[w] = 0" to indicate free. But woman indices start at 1, so 0 is safe.

    Now we must ensure that rankW is stored correctly: rankW[w] is a list of length n+1; we only fill indices for men that appear; others remain 0. But all men 1..n appear exactly once in the preference list, so it's fine.

    Now, what about memory for rankW? For n=500, rankW is list of 501 items, each a list of 501 ints, total ~ 501*501 = 251001 ints. That's fine.

    Now we output each test case's result. The sample output for second test case is:

    1 4 2 5 3 1 4 3 5 7 6 6 7 2

    We can trust that our algorithm yields that.

    But we need to verify: In second test case, the women's and men's preferences are given. Possibly the algorithm might produce a different stable matching? The man-proposing algorithm yields the man-optimal stable matching. The sample output appears to be the man-optimal? Possibly yes.

    Thus code is ready.

    Potential pitfalls: The number of proposals could be large; using Python list for freeMen may cause many appends. But that's fine.

    Edge Cases: n=1 trivial.

    Now about reading: We need to ensure we convert to int correctly. We'll use .split() which splits on whitespace.

    Now we consider performance: For each proposal, we access rankW[w][m] and rankW[w][cur]. These are list lookups. That's fine.

    Alternative: Could precompute all women ranks as a list of dicts, but list is faster.

    Now, I'll also think about memory: For each test case, we allocate new arrays. Since t may be large, we must free them after each test case (they are overwritten each loop iteration, so GC will collect old ones, but we need to avoid holding references across loops). Our variables are local to the loop, so okay.

    Now ensure that we use fast output: collect lines in list and join and write. That's good.

    Now I'll consider if we need to clear the output between test cases? We'll just write each test case's output with a newline at the end. So overall output will have each line ending with newline, and no extra blank lines.

    Now I'll test with sample manually.

    But before final, I recall a known problem: "Stable Marriage Problem" (SPOJ STABLEMP) that uses similar input and output. Usually they ask for both man-optimal and woman-optimal. But here only one matching. And they want the output as man-woman pairs. In STABLEMP, the input format is slightly different: first line T, then each case: n, then women preferences (n lines with woman i and her n preferences), then men preferences. Exactly same. And they require output: for each man, his partner. So this is exactly STABLEMP? Possibly. In SPOJ, they require both man-optimal and woman-optimal solutions? Actually problem "STABLEMP" asks: For each test case, output two lines? Let's recall: In UVA 1175 (The Stable Marriage Problem) they ask to output man-optimal matching. But this description says "if a man m prefers some woman w more than his wife, and w prefers m more then her husband a new marriage occurs between w and m." That's classic. So it's likely the classic problem.

    But we must produce just one matching per test case.

    Thus solution done.

    Now, will our algorithm produce exactly the sample output? Yes for first test case. For second, we should test quickly to ensure.

    Let's try to simulate second test case with code in mind? Not necessary; trust.

    But we might need to ensure that the input order for women is as described: For n=7, they gave:

    1 3 4 2 1 6 7 5 2 6 4 2 3 5 1 7 3 6 3 5 7 2 4 1 4 1 6 3 2 4 7 5 5 1 6 5 3 4 7 2 6 1 7 3 4 5 6 2 7 5 6 2 4 3 7 1

    These are women preferences: each line: woman i, then her 7 preferences (men). Then men:

    1 4 5 3 7 2 6 1 2 5 6 4 7 3 2 1 3 1 6 5 4 3 7 2 4 3 5 6 7 2 4 1 5 1 7 6 4 3 5 2 6 6 3 7 5 2 4 1 7 1 7 4 2 6 5 3

    We'll run our algorithm quickly (maybe offline), but we can trust.

    One more nuance: In the sample output for test case 2, the matching is:

    1 4 2 5 3 1 4 3 5 7 6 6 7 2

    We can quickly see if this is man-optimal: For man1, his wife is 4. Man1's preferences: from his list: 4 5 3 7 2 6 1. So his first choice is woman4, and he gets her. So man1 is happy. Man2's list: 5 6 4 7 3 2 1, he gets woman5, his first choice. Man3: list: 1 6 5 4 3 7 2, gets woman1, his first choice. Man4: list: 3 5 6 7 2 4 1, gets woman3, his first choice. Man5: list: 1 7 6 4 3 5 2, gets woman7, second choice? First is 1, but 1 is taken by man3; maybe that's stable. Man6: list: 6 3 7 5 2 4 1, gets woman6, first choice. Man7: list: 1 7 4 2 6 5 3, gets woman2, fourth choice? Actually his list: 1,7,4,2,6,5,3. So his first three are 1,7,4, but those women are taken by man3, man5, man1? woman1 taken by man3, woman7 taken by man5, woman4 taken by man1. So his best available is woman2. So that seems plausible.

    So the output is consistent with man-proposing algorithm.

    Now, is it possible that our algorithm might produce a different matching due to the order we process free men? The man-proposing algorithm yields the same man-optimal matching regardless of the order of free men? Actually the Gale-Shapley algorithm with men proposing always yields the same man-optimal stable matching, regardless of the order of proposals, as long as men propose in some order and we handle engagements properly. That's a known property. So we will get that matching.

    Thus the solution is correct.

    Now consider if the input may contain extra spaces or newline at the end, etc. Our reading with readline and split will handle.

    Now regarding potential pitfalls: The women's rank array: we set rank[w][m] = position (0-index). But we might need to be careful that m can be up to n, but we allocate list of length n+1. That's fine.

    Now a subtle point: In the else branch after rejection, we do freeMen.append(m). But note that we popped m from the list and now we append it back. This means that the same man may be processed again immediately if we are using stack (pop from end and append to end, that results in the same man being processed again and again without giving others chance? Actually if we use list as stack and do pop() (from end) and then append(m) to end, then after rejection we push m to end, but the next iteration we pop from end again, which will be the same m (since we just appended). That would cause a busy loop where we process the same man repeatedly until his next proposal is accepted or he runs out. That is not a problem because we always increment his nextProposal index, so eventually he will be accepted or exhaust list. However, this could lead to a deep recursion of repeated proposals from the same man without interleaving other free men. That is fine and actually mimics the algorithm where a man keeps proposing until accepted. But we must ensure that other free men also get chance. However, if we process only the last man in the list and keep appending him back, we will never process other free men until this man becomes engaged. But that's okay because the algorithm is correct even if we process proposals sequentially by a single man until he becomes engaged. The algorithm does not require interleaving. In fact, the standard description often says: "while there exists a free man who hasn't proposed to every woman, he proposes to the highest-ranked woman he hasn't proposed to yet." It doesn't specify order; you can pick any free man. So processing the same man continuously is allowed. So using list as stack with pop() and append(m) when rejected essentially keeps the same man at the top of the stack, causing sequential proposals by him. That's fine.

    But if there are multiple free men, and we pop one (the last) and if he gets rejected and appended, he will become the last again, so we continue with him. That may delay processing other free men, but eventually when he gets engaged, we pop the next free man. The algorithm still terminates. So it's okay.

    But one nuance: Suppose a man is rejected and appended, but his next proposal index goes out of bounds? But that won't happen because before he becomes engaged, he must propose to all women? In worst-case, a man could propose to all women and still be rejected if all women prefer their current partners. But that cannot happen in stable marriage because at the end there is a perfect matching and the algorithm guarantees that each man gets a match before he exhausts his list. So it's safe.

    But for safety, we could add a check: if nextProp[m] >= n: then he has no more women to propose, and he should not be free? But this case shouldn't arise. If it does, it would mean no stable matching exists, but we know it always does.

    Thus implementation is fine.

    Now about output format: They printed a blank line between test cases? In the sample output, they have two test cases separated by newline? Actually the sample shows:

    Output: 1 3 2 2 3 1 4 4 1 4 2 5 3 1 4 3 5 7 6 6 7 2

    There is no blank line between them. So we just print consecutive. But sometimes judges accept an extra newline at the end.

    Now time to think about possible alternative: There is also the woman-oriented version. But we stick with man-proposing.

    Now consider memory for rankW: For n=500, 501x501 = 251001 entries. Each integer in Python is an object (28 bytes) so that's about 7 MB. Times maybe multiple test cases? We'll recreate each time, old ones may be garbage collected. So memory is okay.

    But we can reduce memory by using array('I') or using list of arrays? Not necessary.

    Now about reading: Use sys.stdin.buffer.readline to read each line. But reading many lines, each with up to 501 numbers, using split() and map to int is okay. But we might speed up by using map(int, line.split()) and then convert to list. However, we need to store the preferences anyway.

    Potential micro-optimizations: For the women's lines, we can fill rank directly without storing prefs list. For men's lines, we need the list of preferences.

    We could also combine reading and storing rank using a list comprehension.

    But fine.

    Now, we must be careful: The input format includes the person's number at the start of each line. We need to use that to store in the correct index. It could be that lines are not sorted (i.e., first line might be woman 2, etc.). But sample shows they are in order. But spec says "ith line contains the number i", implying that the i-th line of the women's block corresponds to woman i. So we can trust the order. However, for safety, we still use the read w to index. We'll read w and then use it.

    But we need to ensure that we read exactly n lines for women and n for men, and that each line has the correct number of tokens.

    Now, there may be leading/trailing spaces. split() handles.

    Now, we can produce output.

    One more note: For very large t, we might want to flush output only at the end? But we write per test case.

    Now, I'll implement.

    But before final, I recall that some problems require printing a blank line between test cases. Not here.

    Now, let's run through sample input with our algorithm to ensure output matches exactly.

    Simulate test case 1 as we did, yields correct.

    Test case 2, I'd like to quickly simulate with a script mentally? Could do manually but trust.

    But there might be a nuance: In the man-proposing algorithm, when a woman receives a proposal from a man she prefers over her current partner, she breaks the engagement and becomes engaged to the new man. In our code, we set wife[cur] = 0, and then set husband[w] = m and wife[m] = w. Then we freeMen.append(cur). That's correct.

    But we also need to update wife[m] when engaged initially. We did.

    One small bug: In the case where husband[w] == 0, we set wife[m] = w and husband[w] = m. But we didn't remove m from freeMen (since we popped him, we don't add him back). That's correct.

    Now, in the else branch for rejection, we append(m) to freeMen, but note that we didn't set wife[m] to 0 because it's already 0 (since he is free). But after rejection, he is still free. So that's fine.

    But consider scenario: m was previously engaged, got dumped, and now is free. At that point, wife[m] is set to 0 (we set wife[cur] = 0). So when he becomes free, he is appended to freeMen, and his nextProp index is already pointing to the next woman after the one he was engaged to. So when he later proposes, he will propose to the next woman. That's correct.

    Thus algorithm is correct.

    Now, one more nuance: In the else branch when w prefers m over cur, we set wife[cur] = 0, husband[w] = m, wife[m] = w, and freeMen.append(cur). But what about the case where m was free? He was just popped from freeMen, so we set his wife. That's fine. But what if m was actually engaged to some other woman? In the standard algorithm, only free men propose. So m is always free when we pop him. So that's safe.

    Thus all good.

    Now, potential performance improvements: Use array module or list of ints. Use while loop with index. But fine.

    Now, I'll produce final code.

    But I recall that in some implementations, they avoid using wife array for men; they just keep husband for women. But we need to output wife for each man, so we need wife array.

    Now, we need to ensure we convert the input numbers to integers quickly. Using map(int, line.split()) is fine.

    But we might want to parse each line using a faster method: since each line could have many ints, maybe using .split() and map is okay.

    Given that t could be up to 100 and n up to 500, total lines ~200,000? Actually 2n lines per test case, 1000 lines per test case, 100 test cases -> 100k lines. That's not huge. So using split is fine.

    Now, I'll also consider using sys.stdout.write for each line rather than joining list, but joining is fine.

    Now, final code.

    But before finalizing, I want to run through test case 2 with our algorithm to ensure it matches. Let's do manual simulation quickly? Might be long but can attempt with code mental model? Or trust.

    But I'd like to ensure there is no off-by-one: We used rankW[w][m] = position starting 0. So lower rank means more preferred. In the comparison, we check if rankW[w][m] < rankW[w][cur]. That means m is more preferred. That's correct.

    Now, in reading, we set rank = [0]*(n+1). Then for pos, m in enumerate(prefs): rank[m] = pos. So for men not in list, rank stays 0, but all men are in list, so it's fine.

    Now, about the men's preferences: we store as list manPref[m] = prefs (list of women). That list length n. We'll index from 0 to n-1. We set nextProp[m] initially 0, and when we use manPref[m][idx] we must ensure idx < n.

    Now, I'll write code.

    We'll also import sys, collections but we might not need deque; using list.

    Now, implement:

    def solve(): import sys data = sys.stdin.buffer t_line = data.readline() while t_line.strip() == b'': t_line = data.readline() t = int(t_line) out_lines = [] # accumulate all output? Could be large: up to 100500=50000 lines, fine. for _ in range(t): # read n, skip empty lines line = data.readline() while line.strip() == b'': # skip empty lines line = data.readline() n = int(line) # women preferences rankW = [None](n+1) # index 1..n for _i in range(n): parts = list(map(int, data.readline().split())) w = parts[0] prefs = parts[1:] # build rank array rank = [0](n+1) for pos, m in enumerate(prefs): rank[m] = pos rankW[w] = rank # men preferences manPref = [None](n+1) for _i in range(n): parts = list(map(int, data.readline().split())) m = parts[0] prefs = parts[1:] manPref[m] = prefs # Gale-Shapley nextProp = [0](n+1) husband = [0](n+1) wife = [0]*(n+1) freeMen = list(range(1, n+1)) while freeMen: m = freeMen.pop() idx = nextProp[m] # if idx >= n: continue (should not) w = manPref[m][idx] nextProp[m] = idx + 1 if husband[w] == 0: wife[m] = w husband[w] = m else: cur = husband[w] if rankW[w][m] < rankW[w][cur]: # w prefers m wife[cur] = 0 husband[w] = m wife[m] = w freeMen.append(cur) else: # reject freeMen.append(m) # collect output for m in range(1, n+1): out_lines.append(f"{m} {wife[m]}") sys.stdout.write("\n".join(out_lines))

    But note: If we accumulate out_lines for all test cases, we need to ensure newline between test cases? In our loop, we append lines consecutively. That's fine, as there is no extra blank line. But at the end, we should add a newline after the entire output? The write with join doesn't include trailing newline, but it's okay, though some judges may require a newline at end. Usually it's fine. However, to be safe, we can add "\n" at the end: sys.stdout.write("\n".join(out_lines) + "\n"). Or we can print each line directly. I'll add trailing newline.

    But be careful: If there are many test cases, out_lines could be up to 50000 strings, which is fine.

    Alternatively, we can print per test case to avoid storing all, but it's okay.

    Now, we must consider the possibility that input lines may have trailing spaces, but split handles.

    Now, let's test on sample input manually by running mental? Could do but trust.

    One more potential issue: In the reading of women's lines, we assume each line has exactly n+1 numbers. However, there might be extra spaces. But split works.

    Now, final code. But I recall that there is a known subtlety: In the Gale-Shapley algorithm, the free man proposes to the next woman on his list that he has not yet proposed to. In our implementation, we increment nextProp[m] regardless of acceptance or rejection. That is correct. When a man becomes free after being dumped, his nextProp index is already beyond the woman he was engaged to, so he will propose to the next woman. That's correct.

    But what about the case when a man is dumped and we set wife[cur]=0, but we did not reset his nextProp? That's fine; he continues from where he left off.

    Now, confirm termination: Each proposal increments some man's nextProp index, and there are at most n proposals per man, so at most n^2 proposals.

    Now, one more nuance: In the else block for acceptance (when w prefers m), we set wife[cur]=0 and freeMen.append(cur). But we also need to ensure that the man cur is now free, so his wife is set to 0. However, we also need to ensure that his engagement is broken. We did that. Also, what about the woman's previous engagement? We've set husband[w]=m. So it's updated.

    Now, could there be a scenario where cur == m? That would be impossible because if husband[w] is m, then he's already engaged to w, but we popped m as free, so he cannot be engaged to w. Actually if m is engaged to some other woman, he wouldn't be free. In our algorithm only free men propose, so m is not engaged when we pop him. So cur != m.

    Thus fine.

    Now, potential speed: In Python, the inner loop of while freeMen will do many operations. Could be optimized by local variable caching: assign rankW_local = rankW, manPref_local = manPref, etc. But not necessary.

    But one optimization: Instead of using rankW as list of lists, we could store for each woman a dictionary, but list is faster.

    Now, also note that for each proposal we do: rankW[w][m] < rankW[w][cur]. rankW[w] is a list; accessing by index is O(1). Good.

    Now, output: The sample output shows each test case's output lines, but there is no extra newline. We'll join with newline and add newline at the end. That will produce a final newline. That's typically accepted.

    Now, I will test with provided input using mental simulation? Not needed.

    But I'd like to run through second test case quickly to ensure no bug: Let's attempt to simulate a few steps? Might be long but maybe I can find a discrepancy if any. But trust.

    Alternatively, I can think about potential off-by-one in reading: When we read women's lines, we store rankW[w] as list of length n+1 with rank[m] = position (0-index). That's fine. For man preferences, we store list as read. The algorithm will process men in order of free list (which is initially [1,2,3,4,5,6,7] but we use pop() so first m=7? Actually list(range(1, n+1)) gives [1,2,3,4,5,6,7] and pop() removes last, so first m=7. Then m=6, etc. But order doesn't matter. So output will be man-optimal, but may be the same as sample because man-optimal is unique. However, note that the man-optimal matching is unique? For stable marriage, the man-optimal and woman-optimal are unique if preferences are strict. So output should match sample exactly. So we should be fine.

    But let's verify quickly the first few steps for test case 2 with man-proposing algorithm irrespective of order. Since it's unique, any order yields same result. So we don't need to simulate.

    Thus final code ready.

    Now, I think about potential memory: out_lines for all test cases may hold up to 50000 lines, each string maybe ~10 chars, total ~500k bytes, fine.

    Now, ensure that we skip empty lines correctly. But we only skip for the n line; but what if there are empty lines between women's lists? Unlikely. But we can add a function to read next non-empty line if needed. But to be safe, for reading women and men lines we rely on the input having exactly n lines with data. If an empty line appears, reading will cause error (parts will be empty). So better to skip empty lines for all reads. But we can design a while loop inside for reading each preference line that skips blank lines.

    Simplify: define a generator that yields non-empty lines. But maybe overkill. I'll just add a helper function to get next non-empty line.

    Given typical judge, no blank lines. So I'll keep as is, but I'll add a check before reading each preference line? I'll just trust.

    However, sometimes input may have trailing newline after test cases. That won't cause a problem because reading after finishing all lines may result in empty string? But we only read exactly n lines for women and n for men, so if there's an extra newline at end of file, it won't be read because we stop after reading the required number of lines. So fine.

    Now, finalize.

    Before final code, I'll do a quick test with sample input manually using python? But I can't run here. I'll write code and trust.

    Edge Cases: n=500, many proposals, but it's fine.

    Now, potential improvements: Use arrays of ints from array module to reduce memory? Not needed.

    Now, I think about the warning "large Input/Output data, be careful with certain languages." So we need to ensure we use fast I/O. Using sys.stdin.buffer and sys.stdout.write is fine. Using join for output is fine.

    Now, final code.

    But I remember that in some stable marriage problems, the input format sometimes lists women's preferences after men's? No, description: first n lines women's preferences, then men's. So we follow that.

    Now, I'll produce final answer. ```python import sys

    def solve() -> None: data = sys.stdin.buffer t_line = data.readline() while t_line.strip() == b'': t_line = data.readline() t = int(t_line) out_lines = []

    for _ in range(t):
        # read n, skip possible empty lines
        line = data.readline()
        while line.strip() == b'':
            line = data.readline()
        n = int(line)
    
        # women's preferences: build ranking matrix
        rankW = [None] * (n + 1)          # index 1..n
        for _ in range(n):
            parts = list(map(int, data.readline().split()))
            woman = parts[0]
            prefs = parts[1:]
            rank = [0] * (n + 1)
            for pos, man in enumerate(prefs):
                rank[man] = pos
            rankW[woman] = rank
    
        # men's preferences: store list of women
        manPref = [None] * (n + 1)
        for _ in range(n):
            parts = list(map(int, data.readline().split()))
            man = parts[0]
            prefs = parts[1:]
            manPref[man] = prefs
    
        # Gale–Shapley (man-proposing)
        next_prop = [0] * (n + 1)   # next woman to propose to
        husband = [0] * (n + 1)     # current partner of each woman, 0 = free
        wife = [0] * (n + 1)        # current partner of each man, 0 = free
        free_men = list(range(1, n + 1))
    
        while free_men:
            m = free_men.pop()
            idx = next_prop[m]
            w = manPref[m][idx]
            next_prop[m] = idx + 1
    
            if husband[w] == 0:
                # woman is free → engage
                wife[m] = w
                husband[w] = m
            else:
                cur = husband[w]
                if rankW[w][m] < rankW[w][cur]:
                    # w prefers m over current partner
                    wife[cur] = 0          # cur becomes free
                    husband[w] = m
                    wife[m] = w
                    free_men.append(cur)   # cur re‑enters the queue
                else:
                    # w rejects m
                    free_men.append(m)
    
        # collect output for this test case
        for m in range(1, n + 1):
            out_lines.append(f"{m} {wife[m]}")
    
    sys.stdout.write("\n".join(out_lines) + "\n")
    

    if name == "main": solve()